Database Users

[HELP] Can't start my Dell

Hi all,
I have a problem :
Today my Dell fall down and now it doesn't want to start...
when I go to Streak Mod recovery there 's these strings :
e: can't mount / dev / block / innersd0p5
e: can't mount CACHE: recovery / log
e: can't open CACHE : recovery / log
e: can't mount /dev / block / innersd0p5
.. When I start the phone it will go to block on StreakDroid Image...
Can anyone help me please??

Not Android Development
Please Post in the Correct Forums Thank You
Moving to General

yarco89 said:
Hi all,
I have a problem :
Today my Dell fall down and now it doesn't want to start...
when I go to Streak Mod recovery there 's these strings :
e: can't mount / dev / block / innersd0p5
e: can't mount CACHE: recovery / log
e: can't open CACHE : recovery / log
e: can't mount /dev / block / innersd0p5
.. When I start the phone it will go to block on StreakDroid Image...
Can anyone help me please??
Click to expand...
Click to collapse
The internal memory on your phone is broken. You need to send your phone off to be repaired.

dkl_uk said:
The internal memory on your phone is broken. You need to send your phone off to be repaired.
Click to expand...
Click to collapse
omg..
how i can do?
i must send it to assistance?
or there is some other method for repair it?

yarco89 said:
omg..
how i can do?
i must send it to assistance?
or there is some other method for repair it?
Click to expand...
Click to collapse
I tried the following and it worked. Remove back cover, remove battery, blow with your lips pressed to the left of where the sim/external sd card is placed two or three times vigorously. It seems this might work because the internal SD card is placed under the plastic right below where I was blowing and it might "reset" the contacts by blowing away any dust that might have blocked . It is not very scientific but it surely beats having to open the whole device to change or clean the internal SD card. Let me know it works ( I battled several hours to come up with this solution)

Opening the phone isn't terribly hard, but getting the top and bottoms to stick after is hard. Just call dell and theyll have one to you in two days if you are in the US.

I am also desperate not to do, I've tried everything and I can not reset the dell streak remains in the dell logo, I tested and nothing multirecovery both as ClockworkMod streak mode.
My problem was that the screen changes and then we did not want to reboot, also gives me this message when I start ClockworkMod:
e: can not mount / dev / block / innersd0p5
e: can not mount CACHE: recovery / log
e: can not open CACHE: recovery / log
e: can not mount / dev / block / innersd0p5
I also tried to rapairtool and nothing seems that if you add everything but does not finish starting.
Please help, thank you very much.

The solution was to take it with the technician, opened it and found a short in the internal memory so it would not start, the safest thing is you have to take it to repair, the system is not the problem is internal memory, my dell streak works great, and I hope it serves you something. Take it to repair ok there is no other solution. A greeting and that everything goes well.

format /persist /firmware HELP pls

On the latest clockworkmod recovery (6.0.4.3), under the "mounts and storage" option the are 2 new partition that can be formatted, /persist and /firmware. The problem is: I've just formatted those two partitions and now I don't have radio anymore and the boot time is significantly longer.

i also want to know the answer to that. i formatted those partitons too and i think it broke something about bluetooth. i need to re-pair bluetooth headsets every time i want to use them.

same goes for me. trying to going back to factory of 4.3
---------- Post added at 05:48 PM ---------- Previous post was at 05:36 PM ----------
im back in my system, followed this guide.
http://forum.xda-developers.com/showpost.php?p=44903174&postcount=227
greetz
---------- Post added at 06:21 PM ---------- Previous post was at 05:48 PM ----------
but becarefull i lost ALL OF MY DATA INCLUDING SD CARD.
i cant laugh atm, be carefull while using the flash-all script

Hi all,
I've wasted 4 hours because of these two options... What is the sense of adding these features that cause endless bootloops?

SilverMist1 said:
i also want to know the answer to that. i formatted those partitons too and i think it broke something about bluetooth. i need to re-pair bluetooth headsets every time i want to use them.
Click to expand...
Click to collapse
I have the same prob, dont know if it's from 4.3 or because i formated those 2 partition (Btw, i did a full restore from google image after, so is there a link between those 2 partition and BT pairing problem?
Did you solved it?

Err0r-4o4 said:
I have the same prob, dont know if it's from 4.3 or because i formated those 2 partition (Btw, i did a full restore from google image after, so is there a link between those 2 partition and BT pairing problem?
Did you solved it?
Click to expand...
Click to collapse
yes there is a link between bt auto pairing problem and those partitions. i found a post here that gives a detailed explanation how to fix it. and it worked. here it is : http://forum.xda-developers.com/showpost.php?p=43277202&postcount=34

SilverMist1 said:
yes there is a link between bt auto pairing problem and those partitions. i found a post here that gives a detailed explanation how to fix it. and it worked. here it is : http://forum.xda-developers.com/showpost.php?p=43277202&postcount=34
Click to expand...
Click to collapse
Yeap, got it before you answer to this tread,
so I did another tuto in Q&A section to give him proper credits and give him more visibility to the community
Thx for answer btw

Hi. I followed the instructions as given in the post. But now my wifi mac is set to the random numbers I saved in the .macaddr file and it gets stuck on obtaining ip address when connecting to a network.

formatted /persist
SilverMist1 said:
yes there is a link between bt auto pairing problem and those partitions. i found a post here that gives a detailed explanation how to fix it. and it worked. here it is : http://forum.xda-developers.com/showpost.php?p=43277202&postcount=34
Click to expand...
Click to collapse
How would you do this without USB debugging enabled?
---------- Post added at 11:15 PM ---------- Previous post was at 10:32 PM ----------
Lxus said:
same goes for me. trying to going back to factory of 4.3
---------- Post added at 05:48 PM ---------- Previous post was at 05:36 PM ----------
im back in my system, followed this guide.
http://forum.xda-developers.com/showpost.php?p=44903174&postcount=227
greetz
---------- Post added at 06:21 PM ---------- Previous post was at 05:48 PM ----------
but becarefull i lost ALL OF MY DATA INCLUDING SD CARD.
i cant laugh atm, be carefull while using the flash-all script
Click to expand...
Click to collapse
How do you do this without adb?

error
g33kt said:
On the latest clockworkmod recovery (6.0.4.3), under the "mounts and storage" option the are 2 new partition that can be formatted, /persist and /firmware. The problem is: I've just formatted those two partitions and now I don't have radio anymore and the boot time is significantly longer.
Click to expand...
Click to collapse
I'm not able to format that partition ... every time I try it will show an error , and worst thing is that I don't have any ROM in my f**** tu yureka please help me....guys:crying:

[Q] Wifi module broken after CM11 install then cwm restore.

I installed latest CWMR. Created a backup to my external SD. Formatted /system, /data, /cache. Flashed CM11 Nightly, cm-11-20131216-NIGHTLY-xt907.zip . Booted fine, ran fine. Went to add my Wifi SSID and when I toggled the Wifi, it toggled back off/on/off/on/off ect... for a few seconds then stayed off. Rebooted. Same thing. Cleared cache and dalvik, same thing. Cleared data/factory reset, same thing.
Decided to restore my backup so did full format (/system, /data, /cache), then restore. System booted into my old stock install which I backed up, same Wifi issue. It acts like it is trying to initialize the service but fails and retries about 6 times, then stays in the OFF position.
So then I decided to try a full factory restore with RSD-Lite and the zip containing 4.1.2. Completed with 0 errors, rebooted, completed initial setup, same Wifi issue present.
Has anyone else encountered this? And If so, do you have any suggestions on how I can restore my Wifi to working order?
Can anyone direct me to some ways I can dig deeper to diagnose this? Is there a tool that looks at the Wifi device and logs errors that may be helpful? I will post a logcat as soon as I can get it.

Unholyfire said:
I installed latest CWMR. Created a backup to my external SD. Formatted /system, /data, /cache. Flashed CM11 Nightly, cm-11-20131216-NIGHTLY-xt907.zip . Booted fine, ran fine. Went to add my Wifi SSID and when I toggled the Wifi, it toggled back off/on/off/on/off ect... for a few seconds then stayed off. Rebooted. Same thing. Cleared cache and dalvik, same thing. Cleared data/factory reset, same thing.
Decided to restore my backup so did full format (/system, /data, /cache), then restore. System booted into my old stock install which I backed up, same Wifi issue. It acts like it is trying to initialize the service but fails and retries about 6 times, then stays in the OFF position.
So then I decided to try a full factory restore with RSD-Lite and the zip containing 4.1.2. Completed with 0 errors, rebooted, completed initial setup, same Wifi issue present.
Has anyone else encountered this? And If so, do you have any suggestions on how I can restore my Wifi to working order?
Can anyone direct me to some ways I can dig deeper to diagnose this? Is there a tool that looks at the Wifi device and logs errors that may be helpful? I will post a logcat as soon as I can get it.
Click to expand...
Click to collapse
After the restore did you test wifi on stock?
Otherwise, seems it is a kernel issue with cm. At lease behaving like one. Bad rom download?
---------- Post added at 03:11 PM ---------- Previous post was at 03:07 PM ----------
Did you wipe data b4 you restored???
Not doing so can cause wifi to break.
It is not commonly known but it happened to me.

Yes after I restored from my backup, I tested wifi and it did the toggle back and forth thing but never came on.
Honestly, I would like to assume I wiped data (/system /data /cache I normally wipe when doing anything like this), but I can't say for sure.
If I didn't, and broke the wifi, is there any way to fix it? Is this a hardware break?
When it happened to you, did you have to replace the mainboard?

Unholyfire said:
Yes after I restored from my backup, I tested wifi and it did the toggle back and forth thing but never came on.
Honestly, I would like to assume I wiped data (/system /data /cache I normally wipe when doing anything like this), but I can't say for sure.
If I didn't, and broke the wifi, is there any way to fix it? Is this a hardware break?
When it happened to you, did you have to replace the mainboard?
Click to expand...
Click to collapse
No no.
Rsd restore is the fix. Just be sure to wipe data before. I have an easy version. See my stickys.

Yea already tried, but now I think I have a messed up partition. Fails with some odd error in flashing /boot.

Unholyfire said:
Yea already tried, but now I think I have a messed up partition. Fails with some odd error in flashing /boot.
Click to expand...
Click to collapse
No way.
Post the details.

When using RSD after full format of all partitions:
Downgraded security version
update tz version failed
preflash validation failed for tz
Tried another VRZ as well: VZW_XT907_4.1.2-9.8.1Q-66_1FF.xml
Same method. Wipe all, RSD, reboot, no Wifi still. Just toggles back and forth then stops on OFF.
Trying to recreate the partition error I saw still. Will post that when I can.

Unholyfire said:
When using RSD after full format of all partitions:
Downgraded security version
update tz version failed
preflash validation failed for tz
Tried another VRZ as well: VZW_XT907_4.1.2-9.8.1Q-66_1FF.xml
Same method. Wipe all, RSD, reboot, no Wifi still. Just toggles back and forth then stops on OFF.
Trying to recreate the partition error I saw still. Will post that when I can.
Click to expand...
Click to collapse
Why do you not flash ...94? You are unlocked.
---------- Post added at 01:28 PM ---------- Previous post was at 01:15 PM ----------
Use my restore ...mod7...xml in my restore thread. You do not format anything.

I will try that one right now.
But here is the error regarding the partitions:
I:Can't partition non mmcblk device: /devices/platform/msm_sdcc.3/mmc_host
Also now seeing:
warning: wipe_block_device: Wipe via secure discard suppressed due to bug in EMMC firmware
Both of these errors are shown after I format /system /data /cache in CWM then go to "show log".
Did I somehow add/remove a non-compatible partition to my EMMC? Does anyone have a reference layout of what partitions SHOULD be on a standard on this device?
Update: I ran your mod7 RSD. Still no Wifi. Same behavior.

Unholyfire said:
I will try that one right now.
But here is the error regarding the partitions:
I:Can't partition non mmcblk device: /devices/platform/msm_sdcc.3/mmc_host
Also now seeing:
warning: wipe_block_device: Wipe via secure discard suppressed due to bug in EMMC firmware
Both of these errors are shown after I format /system /data /cache in CWM then go to "show log".
Did I somehow add/remove a non-compatible partition to my EMMC? Does anyone have a reference layout of what partitions SHOULD be on a standard on this device?
Update: I ran your mod7 RSD. Still no Wifi. Same behavior.
Click to expand...
Click to collapse
You wiped Data?
Mod 7 ran from rsd & did all the ~22 steps & rebooted?
Did you bootup from there & had no wifi?
Then some HW problem must exist.
I do not understand why you did all that formatting.

Just discovered another person has the exact same issue after attempted install of the CM11 12-16 nightly.
LogCat from when I try to enable Wifi:
[ 12-26 13:48:02.733 713: 2770 E/WifiStateMachine ]
Failed to load driver!
[ 12-26 13:48:02.733 713: 849 E/WifiStateMachine ]
DriverFailedState
EDIT: Some more LogCat:
[ 12-26 13:58:21.178 295: 295 I/AudioFlinger ]
loadHwModule() Loaded r_submix audio interface from Wifi Display audio HAL (audio) handle 3
[ 12-26 13:58:27.254 705: 850 E/WifiStateMachine ]
Failed to disable IPv6: java.lang.IllegalStateException: command '1 interface ipv6 wlan0 disable' failed with '400 1 Failed to change IPv6 state (No such file or directory)'
[ 12-26 13:58:27.314 705: 729 I/WifiService ]
WifiService starting up with Wi-Fi enabled
[ 12-26 13:58:27.314 705: 729 D/WifiService ]
setWifiEnabled: true pid=705, uid=1000
[ 12-26 13:58:32.250 705: 1086 I/WifiService ]
WifiService trying to set country code to us with persist set to true
[ 12-26 13:58:36.114 1216: 1332 W/WifiNormalizer ]
No specific device detected. Offset set to -7.
[ 12-26 13:58:42.541 1540: 1786 W/Settings ]
Setting wifi_sleep_policy has moved from android.provider.Settings.System to android.provider.Settings.Global, returning read-only value.
[ 12-26 13:58:27.825 705: 872 E/WifiStateMachine ]
Failed to load driver!
[ 12-26 13:58:27.825 705: 850 E/WifiStateMachine ]
DriverFailedState

Edit: Double post... oops.

Unholyfire said:
Edit: Double post... oops.
Click to expand...
Click to collapse
All this means nothing.
Did wifi work in the conditions of my previous post?

aviwdoowks said:
All this means nothing.
Did wifi work in the conditions of my previous post?
Click to expand...
Click to collapse
Nope. Still has not worked since it first stopped working after installing the CM11 12-16 nightly.
Tried the Mod7 RSD in your links. Same thing, wifi will not turn on. Same errors in logcat.

Unholyfire said:
Nope. Still has not worked since it first stopped working after installing the CM11 12-16 nightly.
Tried the Mod7 RSD in your links. Samea thing, wifi will not turn on. Same errors in logcat.
Click to expand...
Click to collapse
Are we on the same page?
Forget cm. I am talking about wiping data from cwmr, (do not go to mounts...) then booting to stock right after you run the rsd lite restore.

Yes that's what I did. I only mentioned cm to reference that's where all the trouble started. Anyway, I found someone else that also has the exact same problem after doing exactly what I did. They are also searching for a solution. Happened to both of us after installing cm11 nightly 12-16 in the same way. So if it's bad hardware, it went bad because of that nightly install.

hi.
i had same problem with wifi after experiments with CWM.
look into /persist folder on your device. have a WCNSS_qcom_wlan_nv.bin file?
when i restore this file my wi-fi began work normally.
sorry for poor english:cyclops:

mwg: said:
hi.
i had same problem with wifi after experiments with CWM.
look into /persist folder on your device. have a WCNSS_qcom_wlan_nv.bin file?
when i restore this file my wi-fi began work normally.
sorry for poor english:cyclops:
Click to expand...
Click to collapse
Any chance you could get me a clean copy of that file?
Also, what other files belong in that folder? Mine is empty.

here is 2 archives - my backup of /persist folder and /etc/firmware/wlan/prima (there some additional files and links to /persist)
hope it help you

mwg: said:
here is 2 archives - my backup of /persist folder and /etc/firmware/wlan/prima (there some additional files and links to /persist)
hope it help you
Click to expand...
Click to collapse
After you replaced those files, did you just reboot and it works, or did you have to clear /data - /cache - /dalvik? Any of thos combinations?
Thank you so much by the way for grabbing those files for me so quick!

{All 2011}[FAQ][Q&A][5.1] LegacyXperiaAOSP discussion

This thread has been created
for
Questions & Answers/Troubleshooting
Specific to LegacyXperiaAOSP Lollipop
Please feel free to share issues, questions and offer help
It is always best to thank a ROM OP, in lieu of simply posting "Thank you".
Please keep discussion focused, on the topic described in the OP​

stopped on boot animatio
I'm standing at the boot animation for a several minutes. takes too long to boot?

my sony xperia arc stuck on android boot

manager sdcard messages not work.
my device: arc s

for Play zeus R800i? have chance?

what about games such as modern combat and asphalt 8 are they smooth ?

@mikegapinski
Just wanted to know why this thread is in Xperia Arc section? I kept searching in Xperia Mini, mini pro, live with walkman section!
I think you will have more people to test if you create thread there too.
Also can you please also provide MD5SUMs for all ROM zip files?
Thank you!

Are u Serious
[email protected] said:
what about games such as modern combat and asphalt 8 are they smooth ?
Click to expand...
Click to collapse
Dude this is an alpha rom expect it to work not to do wonders i am surprised dev's are contributing so much considering the device is 4 years old approx
---------- Post added at 04:17 PM ---------- Previous post was at 04:15 PM ----------
Happens always but rom is flashed, cant flash gapps

yoo
I am on cm11 arc s...can i flash aosp5...or need to flash stock rom and then flash aosp5...thx

PetarXPERIA said:
I am on cm11 arc s...can i flash aosp5...or need to flash stock rom and then flash aosp5...thx
Click to expand...
Click to collapse
You can flash AOSP5 direct. The point is u must have flashed particular stock rom in past so as to make sure you are on right baseband.

come on man in jeally dream and ultimate hd you can play modern combat very smooth and now you say this device is 4 years old :/ ? this is not good answer just want to know after all of this steps can we play a good game lag free or not

Sony P
Is it compatible for Sony P announced is 2012, February

can`t flash from recovery
Hello all.
I`m trying flash System-Formating-Tool_signed.zip in recovery on lt18i but have message:
"E: cannot load volume /misc! Instalation aborted"
Click to expand...
Click to collapse
What am I doing wrong ?
Thank you for help.
My fault, forgot that all partitions must be primary, not logical.

OMG urushi is slow with KK, with LP will became a fast like a stone in the mud!

Is 2GB ext4 necessary, I have 1.3GB ext4. So will it work with 1.3GB ext4 partition in my sd card??
Sorry for posting in the development thread.

sarin28 said:
Is 2GB ext4 necessary, I have 1.3GB ext4. So will it work with 1.3GB ext4 partition in my sd card??
Sorry for posting in the development thread.
Click to expand...
Click to collapse
It may work , it's not tested .
If you want you can test and report back here if you faced problems.
It is recommended to use 2GB ext4 .
---------- Post added at 02:56 PM ---------- Previous post was at 02:55 PM ----------
emil_stefanov1 said:
Is it compatible for Sony P announced is 2012, February
Click to expand...
Click to collapse
No
---------- Post added at 02:59 PM ---------- Previous post was at 02:56 PM ----------
chancex said:
for Play zeus R800i? have chance?
Click to expand...
Click to collapse
if think it should have. i already see a build for phoenix ...
[email protected] said:
what about games such as modern combat and asphalt 8 are they smooth ?
Click to expand...
Click to collapse
This is something you have to test on your own. the goal of this rom is not gaming.
[email protected] said:
come on man in jeally dream and ultimate hd you can play modern combat very smooth and now you say this device is 4 years old :/ ? this is not good answer just want to know after all of this steps can we play a good game lag free or not
Click to expand...
Click to collapse
If you want your phone for gaming and you are satisfied with jelly dream , then stay on jelly dream

Cannot install gapp
It said
Code:
E: footer is wrong
E: signture verification failed
and one thing
It alway said
Code:
E: cannot load volume /misc
when install update and gapp
info
2nd partition size is around 9GB all partition is primary
I do it in step
1. Flash boot.img in fastboot then reboot into recovery
2. Format /system using System-Formating-Tool_signed.zip through update zip, then wipe /data and wipe /cache
3. install update.zip
4. install gapps.zip

Root Access
How to get Root access on this build?

puuga said:
Cannot install gapp
It said
Code:
E: footer is wrong
E: signture verification failed
and one thing
It alway said
Code:
E: cannot load volume /misc
when install update and gapp
info
2nd partition size is around 9GB all partition is primary
I do it in step
1. Flash boot.img in fastboot then reboot into recovery
2. Format /system using System-Formating-Tool_signed.zip through update zip, then wipe /data and wipe /cache
3. install update.zip
4. install gapps.zip
Click to expand...
Click to collapse
have you edited the zip ?
If yes , then download again. The new cyanogenmod recovery does not flash unsigned zip , and editing the zip breaks it's signing

first enable developer option by clicking on build no. 8 times.
second,go to developer options & enable root for apps & adb.

my android head unit crashing..

I bought this android head unit from ALIBABA. supplier was good shipped early. but then after i got the item used for like 3 weeks and suddenly it restarted and an error came. there was two options "try again" or "factory reset" so i selected try again and it did restart again and worked perfect. Then yesterday i was listening music and suddenly it restarted and same error. same like before i have selected try again and it did work . as i am new i cannot post any link so be low i will write down the whole error thing that shows. i asked the supplier they have given me an update file and told to update. Do note second error came after 1 month from the first error. in between i have done factory reset as the suppler as instructed me to do. but after doing that also second error came.
below is the error message
ANDROID RECOCVERY
ANDROID/PX5/PX5
8.0.0/OPR5.170623.007/HCT02011544
USERDEBUG/TEST-KEY
ANY BUTTON CYCLES HIGHLIGHT
LONG-PRESS ACTIVATES
CANT LOAD ANDROID SYSTEM. YOUR DATA MAY BE CORRUPT.
IF YOU CONTINUE TO GET THIS MESSAGE YOU MAY NEED TO PERFORM FACTORY DATA RESET AND ERASE ALL USER DATA STORED ON THIS DEVICE.
RECOVERY V8.0.6.
E: TRYING MOUNT /DEV/BLOCK/MMCB1K0P1 TO NTFS.
E: TRYING MOUNT /DEV/BLOCK/MMCB1K0 NTFS
E: FAILED TO MOUNT /MNT/EXTERNAL_SD ERROR : NO SUCH DEVICE
E:TRYING MOUNT /DEV/BLOCK/MMCB1K0PL TO NTFS
E: TRYING MOUNT /DEV/BLOCK/MMCB1K0 NTFS
E: FAILED TO MOUNT /MNT/EXTERNAL_SD ERROR : NO SUCH DEVICE

Is the problem solved
Is the problem solved. I have the same problem

Fixed
There is a RST button on the head unit.
Press it with something pointy
Press one it changes
Long press it selects.
Your Welcome

Andriod head unit crashed
Hi
As per below instructions tried pressing reset once to change but there is no use.
Can you pls help me in doing factory reset
Regards