[HELP] Can't start my Dell - Streak 5 General

Hi all,
I have a problem :
Today my Dell fall down and now it doesn't want to start...
when I go to Streak Mod recovery there 's these strings :
e: can't mount / dev / block / innersd0p5
e: can't mount CACHE: recovery / log
e: can't open CACHE : recovery / log
e: can't mount /dev / block / innersd0p5
.. When I start the phone it will go to block on StreakDroid Image...
Can anyone help me please??

Not Android Development
Please Post in the Correct Forums Thank You
Moving to General

yarco89 said:
Hi all,
I have a problem :
Today my Dell fall down and now it doesn't want to start...
when I go to Streak Mod recovery there 's these strings :
e: can't mount / dev / block / innersd0p5
e: can't mount CACHE: recovery / log
e: can't open CACHE : recovery / log
e: can't mount /dev / block / innersd0p5
.. When I start the phone it will go to block on StreakDroid Image...
Can anyone help me please??
Click to expand...
Click to collapse
The internal memory on your phone is broken. You need to send your phone off to be repaired.

dkl_uk said:
The internal memory on your phone is broken. You need to send your phone off to be repaired.
Click to expand...
Click to collapse
omg..
how i can do?
i must send it to assistance?
or there is some other method for repair it?

yarco89 said:
omg..
how i can do?
i must send it to assistance?
or there is some other method for repair it?
Click to expand...
Click to collapse
I tried the following and it worked. Remove back cover, remove battery, blow with your lips pressed to the left of where the sim/external sd card is placed two or three times vigorously. It seems this might work because the internal SD card is placed under the plastic right below where I was blowing and it might "reset" the contacts by blowing away any dust that might have blocked . It is not very scientific but it surely beats having to open the whole device to change or clean the internal SD card. Let me know it works ( I battled several hours to come up with this solution)

Opening the phone isn't terribly hard, but getting the top and bottoms to stick after is hard. Just call dell and theyll have one to you in two days if you are in the US.

I am also desperate not to do, I've tried everything and I can not reset the dell streak remains in the dell logo, I tested and nothing multirecovery both as ClockworkMod streak mode.
My problem was that the screen changes and then we did not want to reboot, also gives me this message when I start ClockworkMod:
e: can not mount / dev / block / innersd0p5
e: can not mount CACHE: recovery / log
e: can not open CACHE: recovery / log
e: can not mount / dev / block / innersd0p5
I also tried to rapairtool and nothing seems that if you add everything but does not finish starting.
Please help, thank you very much.

The solution was to take it with the technician, opened it and found a short in the internal memory so it would not start, the safest thing is you have to take it to repair, the system is not the problem is internal memory, my dell streak works great, and I hope it serves you something. Take it to repair ok there is no other solution. A greeting and that everything goes well.

Related

[Help] USB not working

Hi all,
I have an issue with my HTC Magic (Rogers' 32A), I am pretty pessimistic about being able to fix it, but if I don't ask I will never know
So here's the problem:
My phone fell in the water.
I took it out, removed the battery, let it dry.
Now everything is working fine except the USB connection, when I plug it to a PC via USB there is no notification, but the phone charges fine.
Basically I don't see the USB device and the can't browse the sd card, I have to take it out and use a card reader.
Also I can't adb, fastboot etc...
Other weird thing happening, when the phone is off the screen is always on, I have to remove the battery for the screen to completely shut off.
When the system is running, when I press the END/Hang Up key, the screen shuts off normally
It seems like a Hardware issue, that's why I don't think there is a (easy) way to fix it.
But I am asking here just in case.
Thank you.
sounds like a hardware issue...
Thank you, that's what I tought...
I ordered a screwdriver for the phone... gonna try to clean up the inside...
Anyone knows if there's a tutorial on how to take the phone appart and putting it back together with out breaking anything ?
check out this thread for service manuals with full tear down info, page 2 specifically for the download link (phandroid), the links on page 1 are dead now
http://forum.xda-developers.com/showthread.php?t=490774
also you can google magic service manual and find tons of links..
good luck, hope you can get your magic fixed
Go into terminal and see if you can manually mount it
$su
#mount /sdcard
___________________________
If that doesnt work, you might want to search for the /dev/block
that enables it internally.. Its around here, but im too lazy to look and link.
x) hope that helps you..
I got the PDF, that's exactly what i was looking for, I shall try it when I get the tools.
I tried the mount technique but it failed:
Code:
mount: mouting /dev/block/mmcblk0p1 on /sdcard failed: Device or resource busy
Thanks guys for all your help.
no, just
$su
#mount /sdcard
thats it lol no dev
jamsk8er1994 said:
no, just
$su
#mount /sdcard
thats it lol no dev
Click to expand...
Click to collapse
yes, that's what I did.
I just pasted the result.
sorry should have been more specific.
like this :
Code:
$su
#mount /sdcard
mount: mouting /dev/block/mmcblk0p1 on /sdcard failed: Device or resource busy
#
Ok, I finally got to disassemble the phone, clean up and blow away the dust/dirt.
And it seems like it fixed the USB issue, I am able to see the usb drive, adb, fastboot, etc...
But the screen is still back lit when the phone is turned off...
Anyways
Thanks for all you help guys.

[Q] rom load help to X10

hello all and hope someone can help me, my problem is wanting to load a rom xperia 2.3.5 x10 with gingerbread with xrecovey root and installed, choose the rom from the restore I get the error E: can not mount / dev/block/mmcblk0p1 (or/dev/block/mmcblk0) (device or resource busy)
can not mount / sdcard. I've done all the steps to the right and backwards and nothing works for me. thanks

Could this be a virus?

I left my TPT unattended for two days on.
When I've tried to use it again I got a message that Encryption did not end correctly to make a reset to original values.
This was strange and because recovery was not working I did tried that step as well without success.
Due to low battery, I manage to access settings and came to realize that there are strange certificates install like TURKTRUST Digital Certificate which I came to realize is reported to be a virus http://eromang.zataz.com/2013/01/04/fraudulent-turktrust-digital-certificat-used-in-active-attacks/
In recovery I see that I cannot mount the internal SD or data. I can connect trough ADB but I'm not an expert able to use it properlly.
Any ideas on how to recover my TPT?
Thanks in anticipation.
EDIT:using adb I manage to get the catlog ...hope someone is expert enough to go around this problem.
I only need to format / mount SDCard and data which is blocked now ...

LG G2 (Verizon) Bricking

OK, I have searched the forum and the web and everything I have found doesn't seem to work. It appears I may have bricked up my phone, soft or hard. I am not sure as this is the first time I have ever bricked up.
What I Have:
Verizon Lg G2
Rooted
Had [ROM OTA] LG G2 Verizon Stock Rooted VS98012B
ClockworkMod Recovery v6.0.4.4
What Happened:
My phone was working great until I was trying to figure out why my GF's G2 was not accepting the update from Verizon. So as the gentleman as I am, I decided to revert my G2 back to stock so I could DL and see if I got an error message as well.
So I was able to revert it back from my CW Recovery, after which it was acting sort in sloggish, strange in a way... I shrugged it off and tried the update from Verizon. I was able to DL no problem, but when I installed it, my cell rebooted... After sever attempts to re-installing an OS (ANY OS), I start searching the web for a cure to this mess.
I tried using this method HERE, only to find out that I cannot go into DOWNLOAD MODE as instructed in step #2. Every attempt I make, only brings me back to the ClockworkMod Recovery main screen.
I have no idea what else to do.
PLEASE!!! Anyone have any ideas??? Would really appreciate it as I am trapped from the outside world... :'(
manojsuper said:
mount the ohone in cwm and flash another custom rom and try again.
Click to expand...
Click to collapse
Mano,
Thanks for your quick response. I looked to see how I can do that and I cannot see where I can mount the CWM, nor do I have a ROM on my cell as I removed it to fit more music. lol
manojsuper said:
KEEP LOOKING IN THE CWM, IT WILL BE THERE.
Click to expand...
Click to collapse
I've searched everywhere and cannot find it. Where would it be and what will the cammonand be?
manojsuper said:
tell me the options that come up when you are in the recovery
Click to expand...
Click to collapse
Code:
- Reboot System Now
- Install Zip
- Wipe Data/Factory Reset
- Wipe Cache Partition
- Backup and Restore
- Mounts and Storage
- Mount /System
- Mount /Data
- Unmount /Cache
- Mount /Persist
- Mount /Firmware
- Mount /Sins
- Mount /Persist-lg
- Mount /mpt
- Format /System
- Format /Data
- Format /Cache
- Format /Persist
- Format /Firmware
- Format /SNS
- Format /Persist-lg
- Format /mpt
- Format /Data and /Data/Media (/SDCARD)
- Mount USB Storage (Tried this)
- Advanced
- Reboot Recovery
- Reboot to Bootloader
- Power Off
- Wipe Dalvik Cache
- Report Error
- Key Test
- Show Log
- Toggle Loki Support
Kilch said:
Code:
- Reboot System Now
- Install Zip
- Wipe Data/Factory Reset
- Wipe Cache Partition
- Backup and Restore
- Mounts and Storage
- Mount /System
- Mount /Data
- Unmount /Cache
- Mount /Persist
- Mount /Firmware
- Mount /Sins
- Mount /Persist-lg
- Mount /mpt
- Format /System
- Format /Data
- Format /Cache
- Format /Persist
- Format /Firmware
- Format /SNS
- Format /Persist-lg
- Format /mpt
- Format /Data and /Data/Media (/SDCARD)
- Mount USB Storage (Tried this)
- Advanced
- Reboot Recovery
- Reboot to Bootloader
- Power Off
- Wipe Dalvik Cache
- Report Error
- Key Test
- Show Log
- Toggle Loki Support
Click to expand...
Click to collapse
If you select install zip, do you see an option to SIDELOAD ZIP? If you do, you can push a ROM from your PC.
SplicedX said:
If you select install zip, do you see an option to SIDELOAD ZIP? If you do, you can push a ROM from your PC.
Click to expand...
Click to collapse
I do, let me check it out...
I'm at work now, so I will try when I get home in the AM.
In the event I cannot get this running, what is the best way to go about getting this phone switched out? Tell them it fell through a hole while ice fishing? Lost it? Or..... lol
Kilch said:
In the event I cannot get this running, what is the best way to go about getting this phone switched out? Tell them it fell through a hole while ice fishing? Lost it? Or..... lol
Click to expand...
Click to collapse
No need for that. You can fix this with a few simple commands.
SplicedX said:
No need for that. You can fix this with a few simple commands.
Click to expand...
Click to collapse
Thanks SplicedX. I am not that command knowledgeable. What would the commands be?
Kilch said:
Thanks SplicedX. I am not that command knowledgeable. What would the commands be?
Click to expand...
Click to collapse
Sorry I feel asleep on you. Here is a basic tutorial.
http://forum.xda-developers.com/showthread.php?t=2559200
SplicedX said:
Sorry I feel asleep on you. Here is a basic tutorial.
http://forum.xda-developers.com/showthread.php?t=2559200
Click to expand...
Click to collapse
No worries Spliced, I just got on about an hour ago.
OK, so I am following the instructions to the "T" and I keep getting an error: "cannot read {file name.zip}". Trying to transfer a ROM... Tried renaming the file, removing the .ZIP extension, everything... grrrr
UPDATE: I did a test to see it I can slide a file. I slid the adb.exe and it did slide it over. So sliding does work. Question is, why doesn't slide a ROM over? I am currently downloading another ROM and going to try to slide it over without changing the name of the file. Perhaps it's the signature of the file??? <shrug>
ANOTHER UPDATE:
Ok, it appears "[ROM OTA] LG G2 Verizon Stock Rooted VS98012B" is not like, cannot be sideloaded. I am now sideloading "[ROM] LG G2 VZW Digital Dream v2.1" but stuck on 85% sending... lol
KO, I was able to sideload an image and it instralls, but it still boots up in recovery mode. It appears my G2 is dead.
That said, what is a good excuse to use at Verizon for a replacement?
Kilch said:
KO, I was able to sideload an image and it instralls, but it still boots up in recovery mode. It appears my G2 is dead.
That said, what is a good excuse to use at Verizon for a replacement?
Click to expand...
Click to collapse
Don't replace it. This is the reason why carriers have gotten so picky with handing out replacement devices, example: VZW 14 day return policy. Guy buys new phone, guy f**ks up new phone, guy returns it claiming defect.
There is a guide to get you back to stock in this sub, and it's even specific to Verizon's G2. It works, I've used it myself. Just be patient during the process and follow the instructions precisely. Good luck!
VS980
Dork6243 said:
Don't replace it. This is the reason why carriers have gotten so picky with handing out replacement devices, example: VZW 14 day return policy. Guy buys new phone, guy f**ks up new phone, guy returns it claiming defect.
There is a guide to get you back to stock in this sub, and it's even specific to Verizon's G2. It works, I've used it myself. Just be patient during the process and follow the instructions precisely. Good luck!
VS980
Click to expand...
Click to collapse
I have tried that and there is a problem, when I press the volume up button, it just boots into CMW. In other words, I do not get the download screen.
Kilch said:
I have tried that and there is a problem, when I press the volume up button, it just boots into CMW. In other words, I do not get the download screen.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2448960
Verify power off. Hold vol up and connect USB.
VS980
Dork6243 said:
http://forum.xda-developers.com/showthread.php?t=2448960
Verify power off. Hold vol up and connect USB.
VS980
Click to expand...
Click to collapse
Did that, was a no-go. Thanks for the help. Went to Verizon and I am getting my replacement in a few days. I gave up...

my android head unit crashing..

I bought this android head unit from ALIBABA. supplier was good shipped early. but then after i got the item used for like 3 weeks and suddenly it restarted and an error came. there was two options "try again" or "factory reset" so i selected try again and it did restart again and worked perfect. Then yesterday i was listening music and suddenly it restarted and same error. same like before i have selected try again and it did work . as i am new i cannot post any link so be low i will write down the whole error thing that shows. i asked the supplier they have given me an update file and told to update. Do note second error came after 1 month from the first error. in between i have done factory reset as the suppler as instructed me to do. but after doing that also second error came.
below is the error message
ANDROID RECOCVERY
ANDROID/PX5/PX5
8.0.0/OPR5.170623.007/HCT02011544
USERDEBUG/TEST-KEY
ANY BUTTON CYCLES HIGHLIGHT
LONG-PRESS ACTIVATES
CANT LOAD ANDROID SYSTEM. YOUR DATA MAY BE CORRUPT.
IF YOU CONTINUE TO GET THIS MESSAGE YOU MAY NEED TO PERFORM FACTORY DATA RESET AND ERASE ALL USER DATA STORED ON THIS DEVICE.
RECOVERY V8.0.6.
E: TRYING MOUNT /DEV/BLOCK/MMCB1K0P1 TO NTFS.
E: TRYING MOUNT /DEV/BLOCK/MMCB1K0 NTFS
E: FAILED TO MOUNT /MNT/EXTERNAL_SD ERROR : NO SUCH DEVICE
E:TRYING MOUNT /DEV/BLOCK/MMCB1K0PL TO NTFS
E: TRYING MOUNT /DEV/BLOCK/MMCB1K0 NTFS
E: FAILED TO MOUNT /MNT/EXTERNAL_SD ERROR : NO SUCH DEVICE
Is the problem solved
Is the problem solved. I have the same problem
Fixed
There is a RST button on the head unit.
Press it with something pointy
Press one it changes
Long press it selects.
Your Welcome
Andriod head unit crashed
Hi
As per below instructions tried pressing reset once to change but there is no use.
Can you pls help me in doing factory reset
Regards

Categories

Resources