Related
Hi!
So everything crashed after i tried this Ubuntu Touch, I go back to PA and I don't have radio and imei in Settings now (it's showing .84 in fastboot mode). No signal at all. So i tried to flash stock via fastboot, but it says that something about 'unknown partition'.
'adb devices
fastboot reboot-bootloader
flash radio-mako-m9615a-cefwmazm-2.0.1700.84.img'
and there is this error about uknown partition 'cannot determine image file'. I don't know what to do, cause I really need my phone's signal ...
Thanks for any help, and don't flash this Ubuntu Touch ...
I'm trying to flash stock rom via recovery, will see what happen.
jahlovePL said:
Hi!
So everything crashed after i tried this Ubuntu Touch, I go back to PA and I don't have radio and imei in Settings now (it's showing .84 in fastboot mode). No signal at all. So i tried to flash stock via fastboot, but it says that something about 'unknown partition'.
'adb devices
fastboot reboot-bootloader
flash radio-mako-m9615a-cefwmazm-2.0.1700.84.img'
and there is this error about uknown partition 'cannot determine image file'. I don't know what to do, cause I really need my phone's signal ...
Thanks for any help, and don't flash this Ubuntu Touch ...
I'm trying to flash stock rom via recovery, will see what happen.
Click to expand...
Click to collapse
I can't copy the zip of stock rom to the sd card. So yeah, partitions are ****ed up.
Flash a factory image, that should help.
Gesendet von meinem Nexus 4 mit Tapatalk
jadephyre said:
Flash a factory image, that should help.
Gesendet von meinem Nexus 4 mit Tapatalk
Click to expand...
Click to collapse
Didn't you read what i wrote here? I can't flash anything cause there's this unknown partition error.
you forgot the partition in the Flash Command u Should use this "fastboot flash radio nameofradioimg.img
Good evening everyone , I have a big enough problem . Mistakenly I did wipe of all phone including system by TWRP and now it will not start . I suppose to to flash the stck ROM but i don't have it, could you help me ? I have a piece of aluminum 299 euros
Alphasampei said:
Good evening everyone , I have a big enough problem . Mistakenly I did wipe of all phone including system by TWRP and now it will not start . I suppose to to flash the stck ROM but i don't have it, could you help me ? I have a piece of aluminum 299 euros
Click to expand...
Click to collapse
same here, would anyone be so kind to share a PLK L01 twrp backup of a stock rom?
find your model PLK-L01
http://www.hihonor.com/en/pages/support#?view=downloads
jaguslav said:
find your model PLK-L01
Click to expand...
Click to collapse
thanks for replying, but apparenty i can't use it to restore my phone, the only thing running is TWRP, no OS anymore... so i (we) desperately need someone to do a backup of his stock rom (via TWRP), and upload it... so i can put it on my phone and restore it
buongu said:
thanks for replying, but apparenty i can't use it to restore my phone, the only thing running is TWRP, no OS anymore... so i (we) desperately need someone to do a backup of his stock rom (via TWRP), and upload it... so i can put it on my phone and restore it
Click to expand...
Click to collapse
exactly! we need a TWRP backup of Stock ROM, please help us! honour support won't answer me
try to extract via HuaweiUpdateExtractor system.img from stock rom and flash it via ADB to phone.
jaguslav said:
try to extract via HuaweiUpdateExtractor system.img from stock rom and flash it via ADB to phone.
Click to expand...
Click to collapse
hooooly s**t i love u! pls came in Italy i wanna date u and offer u a dinner! :laugh::laugh::laugh::laugh:
Alphasampei said:
hooooly s**t i love u! pls came in Italy i wanna date u and offer u a dinner! :laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
You're welcome and thanks for offer
every version of "HuaweiUpdateExtractor" which i have found, did not work for me! Because the PLK-L01 is missing in the device selection setup! Please can you give me a link off a working Extractor?
BTW: isn’t it enaugh, to solve the above described problem to flash the ori. recovery with fastboot or adb?
i would try:
1.) connect the phone to pc
2.) open the communication to the phone using adb-tool v1.0 ore otherwise with the command "adb
devices"
3.) flashing the recovery with "fastboot flash recovery.img"
4.) and than restarting the phone with "fastboot reboot recovery.img"
ore otherwise
4.) reboot the phone with pressing the 3 right key simultaneously longer than 5 sec. to restart flashing the update.app file.
is that way wrong? Please explain.
non-toxic said:
every version of "HuaweiUpdateExtractor" which i have found, did not work for me! Because the PLK-L01 is missing in the device selection setup! Please can you give me a link off a working Extractor?
BTW: isn’t it enaugh, to solve the above described problem to flash the ori. recovery with fastboot or adb?
i would try:
1.) connect the phone to pc
2.) open the communication to the phone using adb-tool v1.0 ore otherwise with the command "adb
devices"
3.) flashing the recovery with "fastboot flash recovery.img"
4.) and than restarting the phone with "fastboot reboot recovery.img"
ore otherwise
4.) reboot the phone with pressing the 3 right key simultaneously longer than 5 sec. to restart flashing the update.app file.
is that way wrong? Please explain.
Click to expand...
Click to collapse
hey there, someone with better experience than me will surely help you out a lot better, but i can guarantee that the 0.9.9.3 release works
just leave "unknown (worstenbrood)" as profile, pick your update.app file, unpack it
personally i used the b121 rom, and flashed it on my phone with adb, more or less as you described, loading both recovery.img and system.img from update.app... "fastboot devices" > "fastboot flashrecovery recovery.img" > "fastboot flashsystem system.img".
this did the trick with me
at my first try i get only more than 25 nameless files! So i thought the procedure miss.
so my question now, how will they get there names? Than’ks for your reply.
non-toxic said:
at my first try i get only more than 25 nameless files! So i thought the procedure miss.
so my question now, how will they get there names? Than’ks for your reply.
Click to expand...
Click to collapse
Try to extract only these 2 files (system.img and recovery.img) separately.
For those who will kill their phones without backups:
1. you need to extract boot.mg (usually 10.boot.img) and system.mg (usually 14.system.img)
2. Somehow get into fast boot mode (from TWRP reboot>>reboot into boot loader
3. Connect the phone to the computer and (using platform-tools from Android SDK) from terminal:
fastboot flash boot 10.boot.img
fastboot flash system 14.system.img
fastboot reboot
The version of the ROM is of no importance
rotmistr said:
For those who will kill their phones without backups:
1. you need to extract boot.mg (usually 10.boot.img) and system.mg (usually 14.system.img)
2. Somehow get into fast boot mode (from TWRP reboot>>reboot into boot loader
3. Connect the phone to the computer and (using platform-tools from Android SDK) from terminal:
fastboot flash boot 10.boot.img
fastboot flash system 14.system.img
fastboot reboot
The version of the ROM is of no importance
Click to expand...
Click to collapse
Hello, as i can see, you are a pro in this!
I would like to flash chinese image on my european device.
How could I try it with a safe way back in case of problems?
Regards,
rotmistr said:
For those who will kill their phones without backups:
1. you need to extract boot.mg (usually 10.boot.img) and system.mg (usually 14.system.img)
2. Somehow get into fast boot mode (from TWRP reboot>>reboot into boot loader
3. Connect the phone to the computer and (using platform-tools from Android SDK) from terminal:
fastboot flash boot 10.boot.img
fastboot flash system 14.system.img
fastboot reboot
The version of the ROM is of no importance
Click to expand...
Click to collapse
Please help, I have just bought a new Huawei Honor 7, PLK-UL00.
I want to root my phone, but not without having a stock rom so I can flash back, But i've looked everywhere but can't find downloadable stock roms.
Clicking on this link http://www.hihonor.com/en/pages/support#?view=downloads
redirects me to http://hihonor.in/#?view=downloads (indian site) where there is no Rom listed for the Honor 7.
Please help.
ykumar00 said:
Please help, I have just bought a new Huawei Honor 7, PLK-UL00.
I want to root my phone, but not without having a stock rom so I can flash back, But i've looked everywhere but can't find downloadable stock roms.
Clicking on this link http://www.hihonor.com/en/pages/support#?view=downloads
redirects me to http://hihonor.in/#?view=downloads (indian site) where there is no Rom listed for the Honor 7.
Please help.
Click to expand...
Click to collapse
Developer edition B708 and last stable B 173
http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=171
waliej said:
Developer edition B708 and last stable B 173
http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=171
Click to expand...
Click to collapse
Thanks so much for the quick reply, just one question though, is this a Chinese Rom, or is it an English one?
I ask because the linked website is in Chinese.
Thanks again!
ykumar00 said:
Thanks so much for the quick reply, just one question though, is this a Chinese Rom, or is it an English one?
I ask because the linked website is in Chinese.
Thanks again!
Click to expand...
Click to collapse
International
jaguslav said:
find your model PLK-L01
http://www.hihonor.com/en/pages/support#?view=downloads
Click to expand...
Click to collapse
Also for the model: PLK-TL01H ?
ancola66 said:
Also for the model: PLK-TL01H ?
Click to expand...
Click to collapse
here http://www.needrom.com/download/honor-7-plk-tl01h/ (need registration)
[Howto Video]
https://www.youtube.com/watch?v=LDdV2OMaXPI&feature=youtu.be
WORKS WITH HUAWEI MATE 8-L29.
Step One things you need:
DC-Unlucker Client
Device Driver (Install Huawei HiSuite or use Driver in the Package)
TWRP (recovery.img)
BETA-SuperSU-v2.67
ADB AND FASTBOOT
NXT-L29C900B162
Download the complete Package:
https://drive.google.com/open?id=0B0tMO0kNwZpvZ0phU3F2clZLVWc
Step two:
Copy the NXT_C900B162.zip and the BETA-SuperSU-v2.67.zip on your SD CARD!
Install your Drivers ( or Hisuite)
Install ADB & FASTBOOT!
After installing ADB move the file 'recovery.img' in the minimal adb fastboot folder.
Open the DC Unlucker.exe
Select "HUAWEI PHONES"
Take your phone and dial "*#*#2846579#*#*"
Select these:
'ProjectMenu',
'Background settings',
'USB ports settings',
'Manufacture mode'.
Connect your Phone
Let em search ur phone (magnifier)
BUY 4 Credits on this Site: (https://www.dc-unlocker.com/buy)
Back to the Unlocker client after you buyd the credits
Connect to server with the Username you choosed and the password from Mail.
If you are connectect click Unlocker
= choose the "Read Bootloader Code" to get the code you need to unlock the bootloader. NOTE THE CODE.
Boot the Mate 8 in bootloader mode
Turn off phone
Press Volume down
and insert USB CABLE.
Start Minimal ADB & FASTBOOT.
Check your Phone with "fastboot devices" if its there go on. IF NOT = CHECK DRIVERS!!
next command you need:
"fastboot oem unlock XXXXXXXXXXXX"
XXXX is your Bootloader Code.
/done. Start your Phone.
*Step Three Enable USB debugging on your device:
Open Settings on your device.
Go to About phone and tap seven times on Build number, this will enable Developer options.
Now go back to Settings and you’ll see “Developer options” there, open it.
Connect your Phone
Tick the USB Debugging checkbox.
Open minimsl adb fastboot again
Connect your device to the in Fastbootmode again and the command u need is:
fastboot devices is your phone there, go on!
fastboot flash recovery recovery.img
next command should be
fastboot reboot
YOU HAVE NOW TWRP
LAST AND IMPORTANT STEPS:
Start TWRP (Turn Phone off, press volume Up and Power button till your phone starts - release power button but still hold volume up)
now you click "Format Data" (ALL YOUR DATA WILL BE DELETE!!!)
Confirm with typing YES
Swipe to format data
go back click "INSTALL" select the SD CARD and then "NXT_C900B162.zip"
Swipe to install again.
DONT REBOOT! Go back!
Click "Install" again
SELECT "BETA-SuperSU-v2.67.zip"
Swipe again.
after installing SuperSu your phone is rooted and ready for a reboot.
If you want TWRP Recovery you have to flash Recovery again via Fastboot. (marked with a *)
question and answers faq
good job there, im sure this will be helpful for new users
After unlocking bootloader how to remove the new boot screen thas sayes your phone is not trusted?
rowihel2012 said:
After unlocking bootloader how to remove the new boot screen thas sayes your phone is not trusted?
Click to expand...
Click to collapse
Atm there is no Option for this. You can only press the PowerButton one time then he loads faster.
But i dont know a Option to remove this. Sorry
maybe future custom roms will include the removal of that screen, it is indeed somewhat annoying
jbmc83 said:
maybe future custom roms will include the removal of that screen, it is indeed somewhat annoying
Click to expand...
Click to collapse
That screen cant be removed its in the bootloader. The nexus 5x and 6p also have it.
I'll make that decrypted boot.img into a flashable TWRP zip file tonight so you can just flash it in TWRP instead of having to use Fastboot.
ajsmsg78 said:
I'll make that decrypted boot.img into a flashable TWRP zip file tonight so you can just flash it in TWRP instead of having to use Fastboot.
Click to expand...
Click to collapse
go back click "INSTALL" select the C00B129SP02 decrypted boot imgzip"
its already in a zip for TWRP. if you read the instruction i said try it with TWRP . But for me it dosnt worked - my way was the fastboot way
EGOiST1991 said:
go back click "INSTALL" select the C00B129SP02 decrypted boot imgzip"
its already in a zip for TWRP. if you read the instruction i said try it with TWRP . But for me it dosnt worked - my way was the fastboot way
Click to expand...
Click to collapse
I'll check it out tonight and try and get it working Thanks.
Thanx guys. Will try when I get my mate8...
BTW boot.img does not download for some reason...
try with a mobile browser
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk
icy20 said:
Thanx guys. Will try when I get my mate8...
BTW boot.img does not download for some reason...
Click to expand...
Click to collapse
Yeah, thats right you have to download with mobilephone (chrome works for me).
If someone can upload it anywhere?! That would be nice. I can send the boot.img for upload - googledrive for example - i dont have this ****
i dont understand why it only works via a mobile browser, hm.... especially since im using the share links provided on my laptop
ajsmsg78 said:
I'll make that decrypted boot.img into a flashable TWRP zip file tonight so you can just flash it in TWRP instead of having to use Fastboot.
Click to expand...
Click to collapse
I did not flash this boot why i should flash it ???
well if u didnt need it then dont worry about it
I unlocked the mate 8 bootloader with the old way like mate 7 and p8max
With facebook account
I know this guide was made for the L29 version so does anyone know if its OK to flash decrypted boot image on the AL10 model
jjerickson19 said:
I know this guide was made for the L29 version so does anyone know if its OK to flash decrypted boot image on the AL10 model
Click to expand...
Click to collapse
Yes jbmc83 flashed it on AL10.
Wait for his confirmation but im sure he have the same boot image likr me.
Gesendet von meinem HUAWEI NXT-L29 mit Tapatalk
What's that method plz
Sent from my HUAWEI NXT-AL10 using Tapatalk
Where I can I download the stock ROM for this model of Yoga Book? I hosed up my machine trying to root. I can boot into recovery mode, hopefully I can flash a new ROM to recover.
Thanks,,,
This could help ...
Edit: 2017/02/21: Link has expired
You can try this one: http://s55.filefactory.com/get/f/osm8z9hwyrz/1844e07b49cb41c8/YB1-X90L_USR_S000155_1609272258_WW06_BP_ROW-flashfiles.zip
It is for YB1-X90L, however, I had success with my X90F. Download just lasts 10 hours if you don' t want to subscribe
yoga-user said:
you can try this one: (http) s55.filefactory.com/get/f/osm8z9hwyrz/1844e07b49cb41c8/YB1-X90L_USR_S000155_1609272258_WW06_BP_ROW-flashfiles.zip
It is for YB1-X90L, however, I had success with my X90F. Download just lasts 10 hours if you don' t want to subscribe
Click to expand...
Click to collapse
Be aware that you'll lose use of the touchpad/halo kb if you flash this stock. Can't find any way of resolving this problem.
No - I' ve full access to all features!
Halo keybord has all functions and can be used without any restrictions. There' s nothing in stuck Only rooting with supersu isn' t possible and the machine is now identified as YB1-X90L and has some additional functions like symbol in toolbar for missing smartcard etc.
From stock-rom I flashed boot.img, bootloader, factory.img, recovery.img and system.img and first of all there where two updates ...
yoga-user said:
Halo keybord has all functions and can be used without any restrictions. There' s nothing in stuck Only rooting with supersu isn' t possible and the machine is now identified as YB1-X90L and has some additional functions like symbol in toolbar for missing smartcard etc.
From stock-rom I flashed boot.img, bootloader, factory.img, recovery.img and system.img and first of all there where two updates ...
Click to expand...
Click to collapse
I reflashed the stock ROM (using Intel PhoneFlash Tool), then allowed the two updates. Still no sketchpad/halo function at all. Do I understand from your last paragraph that you then flashed those imgs after the two updates?
zamzenos said:
I reflashed the stock ROM (using Intel PhoneFlash Tool), then allowed the two updates. Still no sketchpad/halo function at all. Do I understand from your last paragraph that you then flashed those imgs after the two updates?
Click to expand...
Click to collapse
Hi,
I used regular adb / fastboot. As my Yoga was totally stucked I flashed all the images and then installed the updates. Now it' s build LenovoYB1-X90L_S000241_161209, Kernel-Version 3.14.55-x86_64-ga6a34be.
Last of all I locked Bootloader and restored all my Apps.
Good luck!
yoga-user said:
Hi,
I used regular adb / fastboot. As my Yoga was totally stucked I flashed all the images and then installed the updates. Now it' s build LenovoYB1-X90L_S000241_161209, Kernel-Version 3.14.55-x86_64-ga6a34be.
Last of all I locked Bootloader and restored all my Apps.
Good luck!
Click to expand...
Click to collapse
My only options to flash any of the img files is through adb sideload or placing them on the sdcard and installing via recovery. Every attempt fails with an E:footer is wrong; E:signature verification failed message. I can't find any way around the errors.
booneb50 said:
My only options to flash any of the img files is through adb sideload or placing them on the sdcard and installing via recovery. Every attempt fails with an E:footer is wrong; E:signature verification failed message. I can't find any way around the errors.
Click to expand...
Click to collapse
Have you tried the Intel PhoneFlash Tool? So far I've managed to flash the Stock twice, but with the pad/halo problem I described above.
booneb50 said:
My only options to flash any of the img files is through adb sideload or placing them on the sdcard and installing via recovery. Every attempt fails with an E:footer is wrong; E:signature verification failed message. I can't find any way around the errors.
Click to expand...
Click to collapse
Hi,
with this procedure I could restore my bricked device:
- like described at this thread: https://forum.xda-developers.com/showthread.php?t=2588979, I downloaded and installed universal adb / fastboot and fixed fastboot drivers
- then unzipped YB1-X90L_USR_S000155_1609272258_WW06_BP_ROW-flashfiles.zip and copied boot.img, bootloader, factory.img, recovery.img and system.img to my adb-folder (%UserProfile%\adb)
Caution: The next steps will wipe all your personal data! It' s a complete reset to factory settings!!!
- rebooted my device with "Volume up" and "Power" to bootloader (fastboot mode) and then connected it via usb
- opened cmd and navigated to my adb-folder
- tested fastboot mode with command "fastboot devices" with success and
- then flashed all the images (as referred to above) with fastboot commands: fastboot flash boot boot.img, fastboot flash bootloader bootloader and so on.
- after it I rebooted my device to system - be patient, don't power off, it can last very long time before first boot .
- as I had no success with supersu, at this point I decided for myself to relock bootloader - this was the second reset to factory settings
-then I re-installed all my apps manually and restored settings, contacts and calendar from my google-account
I hope, this helps
yoga-user said:
Hi,
with this procedure I could restore my bricked device:
- like described at this thread: https://forum.xda-developers.com/showthread.php?t=2588979, I downloaded and installed universal adb / fastboot and fixed fastboot drivers
- then unzipped YB1-X90L_USR_S000155_1609272258_WW06_BP_ROW-flashfiles.zip and copied boot.img, bootloader, factory.img, recovery.img and system.img to my adb-folder (%UserProfile%\adb)
Caution: The next steps will wipe all your personal data! It' s a complete reset to factory settings!!!
- rebooted my device with "Volume up" and "Power" to bootloader (fastboot mode) and then connected it via usb
- opened cmd and navigated to my adb-folder
- tested fastboot mode with command "fastboot devices" with success and
- then flashed all the images (as referred to above) with fastboot commands: fastboot flash boot boot.img, fastboot flash bootloader bootloader and so on.
- after it I rebooted my device to system - be patient, don't power off, it can last very long time before first boot .
- as I had no success with supersu, at this point I decided for myself to relock bootloader - this was the second reset to factory settings
-then I re-installed all my apps manually and restored settings, contacts and calendar from my google-account
I hope, this helps
Click to expand...
Click to collapse
Hi, I also meet the same problem and need this X90L_USR_S000155_1609272258_WW06_BP_ROW-flashfiles.zip file for recovery, but it seems the link which you shared before expired, can you help to share with me your copy or create another link? Thanks a lot!
Even_xf said:
Hi, I also meet the same problem and need this X90L_USR_S000155_1609272258_WW06_BP_ROW-flashfiles.zip file for recovery, but it seems the link which you shared before expired, can you help to share with me your copy or create another link? Thanks a lot!
Click to expand...
Click to collapse
... you have PM
can i get the link as well?
it would be very nice if someone can help with a download link for yb1-x90l complete rom or even only recovery.img
can you please share the link again?
All the firmware for both models are available at: http://www.easy-firmware.com/index.php. You have to take a subscription to be able to download the files. Files are exclusive downloads. Subscription at $15. Latest versions are the november firmware.
Verstuurd vanaf mijn Lenovo YB1-X90L met Tapatalk
vogemic said:
All the firmware for both models are available at: http://www.easy-firmware.com/index.php. You have to take a subscription to be able to download the files. Files are exclusive downloads. Subscription at $15. Latest versions are the november firmware.
Verstuurd vanaf mijn Lenovo YB1-X90L met Tapatalk
Click to expand...
Click to collapse
I find this very strange this site charges to download the firmware that cannot be found from any other reputable site that I have searched on. It may well be legit but I will steer clear anyway.
keybord
zamzenos said:
Be aware that you'll lose use of the touchpad/halo kb if you flash this stock. Can't find any way of resolving this problem.
Click to expand...
Click to collapse
you need to input country code to enable keyboard. There are several steps as below :
a) Open ‘’contacts’’ app, create a new local contact ” test”
b) Click search button at contact
c) Input ####6020# code into search bar
d) Browser the country code list, then chose country code you want to use, such as US
e) Then DUT will reboot
vimalbhimani said:
you need to input country code to enable keyboard. There are several steps as below :
a) Open ‘’contacts’’ app, create a new local contact ” test”
b) Click search button at contact
c) Input ####6020# code into search bar
d) Browser the country code list, then chose country code you want to use, such as US
e) Then DUT will reboot
Click to expand...
Click to collapse
Long time coming. Thanks for taking the trouble to detail the method. However, in order to update to lastest firmware I was obliged to input a cc. I assumed then that I had got the Halo etc working simply by updating the firmware(!). Even so, good to know why I didn't have Halo. This info is sure to be of benefit to others. Thank you.
yoga-user said:
... you have PM
Click to expand...
Click to collapse
Can you please send me the link as well?
wait for new link download
need stock recovery backup
I will try install windows on android version
I think same Mipad2 (android version can install Windows ) install windows
http://en.miui.com/thread-248564-1-1.html
I need to remove twrp recovery and install stock recovery image
How I can do this gra ul10
Hello! You would be willing to change the ROM?
Uh oh. This reminds me 1 year ago when I had your same problem . The process is simple:
1. Get the UPDATE.APP file wich is no more than all the stuff for the P8 wich includes the recovery. You should find it on emui.huawei.com
2. To see what's in there you need a tool called "Huawei Update Extractor". Just look for it
3. You do the same process for installing TWRP but with the image file "recovery.img"
And you're done
PS. Do a full backup with TWRP just to be sure. To restore it just reflash TWRP and use the restore function
You could flash the original recovery via fastboot if you have a backup of it as raw image.
Or well what @Rome7643 mentioned works also. I submitted a profile for the gra-l09 for the update extractor.
command is like "fastboot flash recovery <path/to/recovery.img>"
There is recovery and recovery2. One of them comes up when usb is connected one when it is not connected when triggering the recovery boot.
nexolight said:
You could flash the original recovery via fastboot if you have a backup of it as raw image.
Or well what @Rome7643 mentioned works also. I submitted a profile for the gra-l09 for the update extractor.
command is like "fastboot flash recovery <path/to/recovery.img>"
There is recovery and recovery2. One of them comes up when usb is connected one when it is not connected when triggering the recovery boot.
Click to expand...
Click to collapse
Thanks alot sir
elsamkary10 said:
I need to remove twrp recovery and install stock recovery image
How I can do this gra ul10
Click to expand...
Click to collapse
Download the UPDATE.APP from a recent stock rom, use the Huawei Update Extractor, then flash the recovery/recovery2 partition with the recovery.img/recovery2.img.
Like "fastboot flash recovery recovery.img" in fastboot mode.
This will only override recovery.
Note that recovery and recovery2 is the same but one triggers only when the usb cable is connected.
Rome7643 said:
Uh oh. This reminds me 1 year ago when I had your same problem . The process is simple:
1. Get the UPDATE.APP file wich is no more than all the stuff for the P8 wich includes the recovery. You should find it on emui.huawei.com
2. To see what's in there you need a tool called "Huawei Update Extractor". Just look for it
3. You do the same process for installing TWRP but with the image file "recovery.img"
And you're done
PS. Do a full backup with TWRP just to be sure. To restore it just reflash TWRP and use the restore function
Click to expand...
Click to collapse
I seem to be having the same problem. In the update.app I dont see the recovery.img file. Instead there are 3 files
recovery_ramdis
recovery_vendor
recovery_vbmeta
please advise.
sirdj said:
I seem to be having the same problem. In the update.app I dont see the recovery.img file. Instead there are 3 files
recovery_ramdis
recovery_vendor
recovery_vbmeta
please advise.
Click to expand...
Click to collapse
Please, next time you should be more careful when downloading the file UPDATE.APP or update.zip ! I guess you downloaded one from Huawei P9, but for sure it's not for Huawei P8 !
After you unpack update.app there should be RECOVERY.img and RECOVERY2.img along with others partitions images.
Good luck !
surdu_petru said:
Please, next time you should be more careful when downloading the file UPDATE.APP or update.zip ! I guess you downloaded one from Huawei P9, but for sure it's not for Huawei P8 !
After you unpack update.app there should be RECOVERY.img and RECOVERY2.img along with others partitions images.
Good luck !
Click to expand...
Click to collapse
I am sorry if I posted in the thread for the wrong phone. I have a mate 9.