Database Users

Please help!!!!

Somehow fried my charging port, so I began the process of unrooting and returning to stock so I could take it in for repair. I ran triangle away then I tried to mobile odin the stock rom, but after mobile odin ran I am stuck at the samsung screen. I cannot odin from a computer because of my fried charging port, and when I went into to download mode to check my status it still sows custom for binary...is there anything i can do???? Please any and all help is greatly appreciated!!!

Factory reset it in stock recovery then run Odin again it'll take care of it
Sent from my SPH-L720 using xda premium
---------- Post added at 01:35 AM ---------- Previous post was at 01:32 AM ----------
Let it boot after factory reset as well so it knows its on official then Odin again
Sent from my SPH-L720 using xda premium

devoureddreams said:
Factory reset it in stock recovery then run Odin again it'll take care of it
Sent from my SPH-L720 using xda premium
---------- Post added at 01:35 AM ---------- Previous post was at 01:32 AM ----------
Let it boot after factory reset as well so it knows its on official then Odin again
Sent from my SPH-L720 using xda premium
Click to expand...
Click to collapse
Thanks for the reply, but I can't odin...my charging port is borked so odin does not see my cable as connected...any other suggestions?

Grab the stock MDC tar.md5 not the one click. & flash with mobile odin
Sent from my SPH-L720 using Tapatalk 2

Can anyone tell me how to unbrick my phone.

I flashed the NAE tar from the Mega site. It seemed to work okay, but then it just did a random reboot without any prompt from me and now it won't boot info recovery. It also won't flash ODIN tars. Well.. It flashes them but it doesn't boot up. On KIES it says that its not compatible wiht my device

You are probably trying to odin other tars that are 4.3 or 4.2.2 which are not compatible with 4.4 as you can't go backwards thanks to Knox.
Sent from my SPH-L720 using Tapatalk
---------- Post added at 09:07 PM ---------- Previous post was at 09:06 PM ----------
And if your phone boots up then you are not bricked.
Sent from my SPH-L720 using Tapatalk

daniel4653 said:
You are probably trying to odin other tars that are 4.3 or 4.2.2 which are not compatible with 4.4 as you can't go backwards thanks to Knox.
Sent from my SPH-L720 using Tapatalk
---------- Post added at 09:07 PM ---------- Previous post was at 09:06 PM ----------
And if your phone boots up then you are not bricked.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
No. I'm aware that yu can't go back. Nothing that I flash sticks. Nothign loads. It just gives a quick glimpse of the bootloader screen then turns off. I"ve tried flashing recoveries and CF auto root. Nothing is working.

if u have insurance.......use it
Sent from my SPH-L720 using xda app-developers app

chris-allen said:
if u have insurance.......use it
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I don't have insurance.

daniel4653 said:
You are probably trying to odin other tars that are 4.3 or 4.2.2 which are not compatible with 4.4 as you can't go backwards thanks to Knox.
Sent from my SPH-L720 using Tapatalk
---------- Post added at 09:07 PM ---------- Previous post was at 09:06 PM ----------
And if your phone boots up then you are not bricked.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Okay, well... I've flashed more than a thousand times between my last two phones. I've never seen this before. I've used PIT files with the Tar and it still doesn't work. I'm fairly familiar with how ODIN works, but I'm wondering if I need to do something in a special order or something. I'm wondering if I can look at the partitions manually with ADB. I've used that before with my Evo 4G, but never on this S4. I need some fresh ideas... I'm all out. I've done everything that I know to do.

I would find a stock file for the s4 sprint version. And try flashing that, do a search for unrooting and returning to stock on the sprint galaxy s4. Then reroot etc.

Go to qbking77.com and you'll find your solution there. Good Luck.

The problem is you already upgraded to NAE which means none of the current stock tar files will work since there isn't an NAE stock tar file yet. You could try to odin the philz or twrp recovery and then install one of the NAE roms in the development section. Hopefully, the NAE stock tar will be available soon which would definitely fix your problem.

My Fastboot Isn't Working Any IDEA?!

Hey guyz
My LG G2 Device is recently hard bricked
and I am stuck at fastboot
but it is not fully working
If I type fastboot devices I get
"? fastboot"
then I tried fastboot reboot n I get
"rebooting..."
But nothing actually happens and phone never reboots :\
Any IDEA Any ONE ?!

Do you know the exact model of your phone. Please check before you continue because toy can further brick your phone if you do not flash the right stuff. Also it would be helpful to know what ROM you were running previously. KitKat or lollipop?
Sent from my LG-D800 using XDA Free mobile app

xmayhemreturnsx said:
Do you know the exact model of your phone. Please check before you continue because toy can further brick your phone if you do not flash the right stuff. Also it would be helpful to know what ROM you were running previously. KitKat or lollipop?
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
Phone model is LG-D800
N my previous rom was jellybeen
I tried to upgrade to lollipop but i have used a wrong kdz

Have you tried manually shoring pins to get into 9006 mode? There is a guide here somewhere that tell you how to do it.
Sent from my LG-D800 using XDA Free mobile app

xmayhemreturnsx said:
Have you tried manually shoring pins to get into 9006 mode? There is a guide here somewhere that tell you how to do it.
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
No I haven't

You should, it's probably the only option for you since you don't have download mode.
Sent from my LG-D800 using Tapatalk

xmayhemreturnsx said:
You should, it's probably the only option for you since you don't have download mode.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Today I spent the whole day shorting the pins and flashing different imgs
It's like nothing has happened :\
What Should I do?!?!

When you shorted your phone were you able to get QHBUSBBULK mode? Also, if you did, did you use srk tools to unbrick?
Sent from my LG-D800 using Tapatalk
---------- Post added at 06:28 AM ---------- Previous post was at 06:25 AM ----------
QHSUSBBULK*
Sent from my LG-D800 using Tapatalk
---------- Post added at 06:37 AM ---------- Previous post was at 06:28 AM ----------
Oh. One last thing, make sure your battery ribbon cable is disconnected and USB is connected to the computer when you are shorting the pins. Also, make sure every connector is connected otherwise you will risk break your screen.
Sent from my LG-D800 using Tapatalk

xmayhemreturnsx said:
When you shorted your phone were you able to get QHBUSBBULK mode? Also, if you did, did you use srk tools to unbrick?
Sent from my LG-D800 using Tapatalk
---------- Post added at 06:28 AM ---------- Previous post was at 06:25 AM ----------
QHSUSBBULK*
Sent from my LG-D800 using Tapatalk
---------- Post added at 06:37 AM ---------- Previous post was at 06:28 AM ----------
Oh. One last thing, make sure your battery ribbon cable is disconnected and USB is connected to the computer when you are shorting the pins. Also, make sure every connector is connected otherwise you will risk break your screen.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Yeah I was able to get in qhusb_bulk mode and in windows 8.1 64bit it was showing lots of disks asking to be formatted.
Then I installed ubuntu on virtual machine and tried to flash images with dd command and those were successful. I unpluged the usb and put the buttons plate back and restarted the phone but still no download mode. I even flashed twrp recovery but NOTHING!
and something that i noticed today that my phones motherboard is once changed and its d801 tmobile and not d800 :\
and something about my ubuntu, on virtual machine it recognizes the phone but disconnect/reconnects after 10secs automatically.
How can I use SRK Tool?
And I have to add In my device manager it shows qhsusub_bulk with a yellow icon meaning its not recognized Is that a problem? do i have to find drivers?

Download these drivers for qualcomm it will change it to qualcomm ... 9006 mode instead of QHSUSBBULK. http://forum.xda-developers.com/atta...8&d=1308601930
Srk tool is very easy to use. What device model do you have? Also, go ahead and install srk tool in windows there is a thread for the dowbload link
Sent from my LG-D800 using XDA Free mobile app

xmayhemreturnsx said:
Download these drivers for qualcomm it will change it to qualcomm ... 9006 mode instead of QHSUSBBULK. http://forum.xda-developers.com/atta...8&d=1308601930
Srk tool is very easy to use. What device model do you have? Also, go ahead and install srk tool in windows there is a thread for the dowbload link
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
I just managed to fix my phone using some other found on sdk
although it hadn't support for my d801 :\ but it still fixed my fastboot and I flashed boot aboot and laf partitions
now I have Download Mode working in my phone
On download mode it shows ROOTED in red, is there any problem if I try flashing lollipop kdz (D80130b.kdz) file?
And Thanks aloooooot for your helpings )))

It shouldn't affect you. Go ahead and continue flashing the kdz, I'm glad you could fix it.
Sent from my LG-D800 using Tapatalk

xmayhemreturnsx said:
It shouldn't affect you. Go ahead and continue flashing the kdz, I'm glad you could fix it.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Now kdz isn't flashing
I'm using LG flash tool 2014 latest build and latest LG drivers
Why?

Can you try using the tot file to downgrade? Usually the flashtool for tot is more descriptive and i could possibly assist if i know what kind of error you are getting
Sent from my LG-D800 using Tapatalk

xmayhemreturnsx said:
Can you try using the tot file to downgrade? Usually the flashtool for tot is more descriptive and i could possibly assist if i know what kind of error you are getting
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Isn't there any other ways?
I don't have enough net to download one
Specially they are jellybean and I couldn't find a Kitkat one.
And it's around 2GB

What error does the kdz give you?
Sent from my LG-D800 using Tapatalk

xmayhemreturnsx said:
What error does the kdz give you?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Lg flash language is Korean I guess it shows me lots of question marks
Plus language chooser isn't showing me option to choose one.

Can you take a screenshot? Make sure when flashing kdz you use CSE flash and do not click read nidel information only click start. Do not worry about the language options.
Sent from my LG-D800 using Tapatalk
---------- Post added at 07:14 AM ---------- Previous post was at 07:14 AM ----------
Read model information*
Sent from my LG-D800 using Tapatalk

xmayhemreturnsx said:
Can you take a screenshot? Make sure when flashing kdz you use CSE flash and do not click read nidel information only click start. Do not worry about the language options.
Sent from my LG-D800 using Tapatalk
---------- Post added at 07:14 AM ---------- Previous post was at 07:14 AM ----------
Read model information*
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Gives me error on 2%

Try re installing the program. Every time i use kdz there is english on the current screen.
Sent from my LG-D800 using Tapatalk
---------- Post added at 07:30 AM ---------- Previous post was at 07:23 AM ----------
Also, did you get a fake d802? Did you try flashing a rom or anything that wasn't meant for your d801?
Sent from my LG-D800 using Tapatalk

d803 thinks its a d801

ok heres the problem
I have a rogers lg g2 that i was hoping to use with wind. I unlocked the phone thinking the sim would work but it didnt,
so not really using my brain i rooted and installed twrp on it and installed a tmobile rom thinking the sim would work....it didnt.
so now im stuck on a cloudy rom with no way of going back that i know of.
i tried installing a d803 rom but twrp says error that a 803 and this devie is an 801.
i tried using flash tool to flash the right firmware but when i try to go into dl mode all i see is a blue line and a box in the top right corner then the screen goes black and nothing works.
I just want to be able to go back to rogers.....
what can i do

Whiterider1971 said:
ok heres the problem
I have a rogers lg g2 that i was hoping to use with wind. I unlocked the phone thinking the sim would work but it didnt,
so not really using my brain i rooted and installed twrp on it and installed a tmobile rom thinking the sim would work....it didnt.
so now im stuck on a cloudy rom with no way of going back that i know of.
i tried installing a d803 rom but twrp says error that a 803 and this devie is an 801.
i tried using flash tool to flash the right firmware but when i try to go into dl mode all i see is a blue line and a box in the top right corner then the screen goes black and nothing works.
I just want to be able to go back to rogers.....
what can i do
Click to expand...
Click to collapse
Are you still able to access the cloudy ROM?
Sent from my LG-D800 using Tapatalk

xmayhemreturnsx said:
Are you still able to access the cloudy ROM?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
yeah it just wont connect to my network.....chatr which is the same as ro9gers

Whiterider1971 said:
yeah it just wont connect to my network.....chatr which is the same as ro9gers
Click to expand...
Click to collapse
What I would do is download build prop editor by jrummy from the play store. Then search ro.product.model and edit that back to a d803 and go back to stock.
Sent from my LG-D800 using Tapatalk

xmayhemreturnsx said:
What I would do is download build prop editor by jrummy from the play store. Then search ro.product.model and edit that back to a d803 and go back to stock.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
back to stock through download mode as that aint working or just a proper rom if i can find it

Um you could find a proper ROM but if you like cloudy wipe the system and install it for the d803
Sent from my LG-D800 using Tapatalk
---------- Post added at 11:39 PM ---------- Previous post was at 11:39 PM ----------
Whiterider1971 said:
back to stock through download mode as that aint working or just a proper rom if i can find it
Click to expand...
Click to collapse
I would recommend a clean install of cloudy g3 for the d803
Sent from my LG-D800 using Tapatalk

xmayhemreturnsx said:
Um you could find a proper ROM but if you like cloudy wipe the system and install it for the d803
Sent from my LG-D800 using Tapatalk
---------- Post added at 11:39 PM ---------- Previous post was at 11:39 PM ----------
I would recommend a clean install of cloudy g3 for the d803
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
ok im doing a clean install through the aroma installer
going into fastboot

Whiterider1971 said:
ok im doing a clean install through the aroma installer
Click to expand...
Click to collapse
You might have also damaged the modem . I would recommend reflashing the modem as well. Find the modem that corresponds to your android version and install it via twrp.
Sent from my LG-D800 using Tapatalk
---------- Post added at 11:47 PM ---------- Previous post was at 11:45 PM ----------
Whiterider1971 said:
ok im doing a clean install through the aroma installer
going into fastboot
Click to expand...
Click to collapse
This is a good page that will have your modem. Please backup your efs and modem via twrp before attempting to install another one. http://forum.xda-developers.com/showthread.php?t=2611749
Sent from my LG-D800 using Tapatalk
---------- Post added at 11:48 PM ---------- Previous post was at 11:47 PM ----------
Whiterider1971 said:
ok im doing a clean install through the aroma installer
going into fastboot
Click to expand...
Click to collapse
Do you still have access to twrp?
Sent from my LG-D800 using Tapatalk

xmayhemreturnsx said:
You might have also damaged the modem . I would recommend reflashing the modem as well. Find the modem that corresponds to your android version and install it via twrp.
Sent from my LG-D800 using Tapatalk
---------- Post added at 11:47 PM ---------- Previous post was at 11:45 PM ----------
This is a good page that will have your modem. Please backup your efs and modem via twrp before attempting to install another one. http://forum.xda-developers.com/showthread.php?t=2611749
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
ok i just tried in install a pa rom which is for my actual device and its saying this package is for device d803 g2 galbi d802...this device is d801

xmayhemreturnsx said:
You might have also damaged the modem . I would recommend reflashing the modem as well. Find the modem that corresponds to your android version and install it via twrp.
Sent from my LG-D800 using Tapatalk
---------- Post added at 11:47 PM ---------- Previous post was at 11:45 PM ----------
This is a good page that will have your modem. Please backup your efs and modem via twrp before attempting to install another one. http://forum.xda-developers.com/showthread.php?t=2611749
Sent from my LG-D800 using Tapatalk
---------- Post added at 11:48 PM ---------- Previous post was at 11:47 PM ----------
Do you still have access to twrp?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
yes

Whiterider1971 said:
ok i just tried in install a pa rom which is for my actual device and its saying this package is for device d803 g2 galbi d802...this device is d801
Click to expand...
Click to collapse
Okay, what I want you to do is go on your computer and open the zip file for the pa ROM. Then navigate to system folder and copy the build.prop to the desktop. Then go to twrp, advanced settings and go to file explorer. Navigate to the system folder.
I will be back, i have to go twrp on my phone and see what button you have to click
Sent from my LG-D800 using Tapatalk
---------- Post added at 11:56 PM ---------- Previous post was at 11:55 PM ----------
Whiterider1971 said:
ok i just tried in install a pa rom which is for my actual device and its saying this package is for device d803 g2 galbi d802...this device is d801
Click to expand...
Click to collapse
Also, move the build.prop that you extracted to your phones SD card.
Sent from my LG-D800 using Tapatalk
---------- Post added 08-15-2015 at 12:06 AM ---------- Previous post was 08-14-2015 at 11:56 PM ----------
Whiterider1971 said:
yes
Click to expand...
Click to collapse
I got a better idea, download this file and extract it to your computer. http://forum.xda-developers.com/attachment.php?attachmentid=1258331&d=1344846415
Then go to system and delete the build.prop that is in the downloaded file. Put the build.prop that you extracted earlier from the pa ROM into the system folder and rezip the file and flash it via twrp.
Sent from my LG-D800 using Tapatalk

xmayhemreturnsx said:
Okay, what I want you to do is go on your computer and open the zip file for the pa ROM. Then navigate to system folder and copy the build.prop to the desktop. Then go to twrp, advanced settings and go to file explorer. Navigate to the system folder.
I will be back, i have to go twrp on my phone and see what button you have to click
Sent from my LG-D800 using Tapatalk
---------- Post added at 11:56 PM ---------- Previous post was at 11:55 PM ----------
Also, move the build.prop that you extracted to your phones SD card.
Sent from my LG-D800 using Tapatalk
---------- Post added 08-15-2015 at 12:06 AM ---------- Previous post was 08-14-2015 at 11:56 PM ----------
I got a better idea, download this file and extract it to your computer. http://forum.xda-developers.com/attachment.php?attachmentid=1258331&d=1344846415
Then go to system and delete the build.prop that is in the downloaded file. Put the build.prop that you extracted earlier from the pa ROM into the system folder and rezip the file and flash it via twrp.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
wipe the system ttried installing it said failed

Whiterider1971 said:
wipe the system ttried installing it said failed
Click to expand...
Click to collapse
Is your phone able to access download mode.
Sent from my LG-D800 using Tapatalk

xmayhemreturnsx said:
Is your phone able to access download mode.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
briefly the the screen goes black

Whiterider1971 said:
briefly the the screen goes black
Click to expand...
Click to collapse
Okay, can you please message me your teamviewer information. I can help you.
Sent from my LG-D800 using Tapatalk

xmayhemreturnsx said:
Okay, can you please message me your teamviewer information. I can help you.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
whats that

Whiterider1971 said:
whats that
Click to expand...
Click to collapse
Its a program that let's me use your computer under your supervision. It let's you cut the connection when you want. It will help me fix your phone. You can download it just Google it.
Sent from my LG-D800 using Tapatalk

xmayhemreturnsx said:
Its a program that let's me use your computer under your supervision. It let's you cut the connection when you want. It will help me fix your phone. You can download it just Google it.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
phone isnt showing up in windows no matter what just in ubuntu

Whiterider1971 said:
phone isnt showing up in windows no matter what just in ubuntu
Click to expand...
Click to collapse
It doesn't matter, all I need is for you download and install this twrp http://blastagator.ddns.net/twrp/2-8-7-1.php . Get on teamviewer on windows I will guide you through the process.
Sent from my LG-D800 using Tapatalk

xmayhemreturnsx said:
It doesn't matter, all I need is for you download and install this twrp http://blastagator.ddns.net/twrp/2-8-7-1.php . Get on teamviewer on windows I will guide you through the process.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
sorry kid woke up and fell asleep could still use the help

sm-n900v note 3 stock verizon lolipop rom to jasmine v6.1 help

hello all, i have just found out about the new root method for the verizon note 3, i have rooted using team yemen Note 3 Verizon 5.0 ROOT Tool, i fallowed this tutorial https://www.youtube.com/watch?v=vjxIrsfT2Lo&feature=youtu.be for installing the jasmine v6.1 rom, my phone will not boot into recovery after flashing with odin, i had to reflash the stock verizon rom with odin and try again, still not working, can anyone help me out with flashing the jasmine rom?

How did you flash jasmine ?
Sent from my SM-N900V using Tapatalk

davekaz said:
How did you flash jasmine ?
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
I flashed jasmine with flash fire . Then i had to flash a partial firmware with odin. After the flash I couldn't enter recovery mode to clear the cash and factory reset it wouldn't boot. So I had to flash the stock Verizon 5.0 rom to get the phone working again
Sent from my SM-N900V using XDA-Developers mobile app

No don't flash partial. What stage is your phone now
Sent from my SM-N900V using Tapatalk
---------- Post added at 07:56 PM ---------- Previous post was at 07:49 PM ----------
Are you on 0B6 or 0F1.? Just root reinstall su and busybox . Once that's done download jasmine 6.1 and flash with flashfire. .then it takes a long time booting with 4 icons across screen. Be patient. Then you could have fun
Sent from my SM-N900V using Tapatalk

davekaz said:
No don't flash partial. What stage is your phone now
Sent from my SM-N900V using Tapatalk
---------- Post added at 07:56 PM ---------- Previous post was at 07:49 PM ----------
Are you on 0B6 or 0F1.? Just root reinstall su and busybox . Once that's done download jasmine 6.1 and flash with flashfire. .then it takes a long time booting with 4 icons across screen. Be patient. Then you could have fun
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
I went back to stock.
Sent from my SM-N900V using XDA-Developers mobile app

Ok. 0B6 firmware?
Sent from my SM-N900V using Tapatalk
---------- Post added at 08:03 PM ---------- Previous post was at 08:02 PM ----------
If your in Verizon account update should come right away
Sent from my SM-N900V using Tapatalk

davekaz said:
Ok. 0B6 firmware?
Sent from my SM-N900V using Tapatalk
---------- Post added at 08:03 PM ---------- Previous post was at 08:02 PM ----------
If your in Verizon account update should come right away
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
No the OF1 version
Sent from my SM-N900V using XDA-Developers mobile app

Good. Did you download 6.1
Sent from my SM-N900V using Tapatalk

davekaz said:
Good. Did you download 6.1
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Yes I have 6.1
Sent from my SM-N900V using XDA-Developers mobile app

Ok. Root su busybox flash with flashfire. Long wait don't freak and it should go to set up
Sent from my SM-N900V using Tapatalk

davekaz said:
Ok. Root su busybox flash with flashfire. Long wait don't freak and it should go to set up
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
its just frozen on the samsung boot screen, on the bottom is an unlocked lock icon that says custom

Pull battery reboot
Sent from my SM-N900V using Tapatalk

davekaz said:
Pull battery reboot
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
tried that, let it sit for like 5 minutes on the boot screen, never changes

That's not good. Can you reboot into recovery and clear cache?
Sent from my SM-N900V using Tapatalk
---------- Post added at 08:48 PM ---------- Previous post was at 08:46 PM ----------
That partial firmware screws things up. You might have to odin recovery tar for 0f1
Sent from my SM-N900V using Tapatalk
---------- Post added at 08:49 PM ---------- Previous post was at 08:48 PM ----------
Even after you Odin stock ..I seen this before where it won't come out of custom screen
Sent from my SM-N900V using Tapatalk

davekaz said:
That's not good. Can you reboot into recovery and clear cache?
Sent from my SM-N900V using Tapatalk
---------- Post added at 08:48 PM ---------- Previous post was at 08:46 PM ----------
That partial firmware screws things up. You might have to odin recovery tar for 0f1
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
yes i can boot to recovery, should i wipe data/factory reset to?

No. Not after flashing jasmine. Could get into trouble. Just cach
Sent from my SM-N900V using Tapatalk

davekaz said:
No. Not after flashing jasmine. Could get into trouble. Just cach
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
okay its still not booting, im going to flash the factory rom back to the phone with odin for the 4 time lol and i guess ill find a better way to install jasmine, my guess is either i have a corrupt .zip or something weird is going on with flashfire, or the way i rooted this phone is causing conflicts

Well I've been there. At least you can get back to stock now and root it....I helped another guy where he could not get out of custom boot screen
Sent from my SM-N900V using Tapatalk
---------- Post added at 09:00 PM ---------- Previous post was at 08:57 PM ----------
http://forum.xda-developers.com/showthread.php?t=3338506
Sent from my SM-N900V using XDA-Developers mobile app

davekaz said:
Well I've been there. At least you can get back to stock now and root it....I helped another guy where he could not get out of custom boot screen
Sent from my SM-N900V using Tapatalk
---------- Post added at 09:00 PM ---------- Previous post was at 08:57 PM ----------
http://forum.xda-developers.com/showthread.php?t=3338506
Sent from my SM-N900V using XDA-Developers mobile app
Click to expand...
Click to collapse
davekaz, can you give me the exact tutorial you used to get jasmine v6.1 installed on the verizon note 3, my note 3 has the OF1 firmware, could you tell me what version of flashfire you used ? its bugging me that i cant get this installed, when some people can

V0.30 I think flashfire..Do you have verizon account? I allowed people to get files from my dropbox but now they limited my account.. have you been on rooted 5 for a bit? Jasmine is no big difference except for xposed
Sent from my SM-N900V using Tapatalk
---------- Post added at 12:22 PM ---------- Previous post was at 12:19 PM ----------
And they are in the midst of unlocking the phone so maybe just enjoy being rooted have you seen the thread for xposed? If you can put that on its the same as jasmine...I gave you all the steps earlier. .the only I could think of...can you screenshot your phone settings after you root and all?
Sent from my SM-N900V using Tapatalk