Database Users

Help!!!!! My play is dead (r800x)

So, I woke up this morning to find my phone off even thouight it was on the charger. Tried to turn it on and nothing happened just vibrates like it's going to turn on and then nothing. I have tried other batteries,hold the power button down and still nothing. I also can't even get into fastboot to do a recovery. I NEED HELP!!!! If anyone has any tips or hints please let me know it would be a lot of help, thanks

Was your bootloader unlocked?
Did you try to update it yesterday?
Sent from my XPlay using XDA App.

Yes it's unlocked anjd no i didn't but my guess is if the update was the problem it probably happen while i was sleeping because it was fine while i went to bed and i woke up to my phone being a paper weight
anyway to fix it or am i boned?

The thread immediately below covered this. You can restore using the following guide and your computer.
http://forum.xda-developers.com/showthread.php?t=1126358

Funny, I literally just found this after i posted. I'm back in fastboot now and in CWM and restoring now so have my fingers crossed.But thanks for the help. Now I know to turn my phone off before I go to sleep now lol
---------- Post added at 03:30 PM ---------- Previous post was at 03:15 PM ----------
IT WORKED!!! Got nervous for a sec when it was on the slpash for a few minutes but booted and I'm running again this tool is a life saver

Gratz.. I never knew it auto updates. You can turn off your wifi and data before going to sleep next time. Instead of turning off the entire phone.
Sent from my XPlay using XDA App.

I've done that the past few days and don't know if i need to worry about it and more cause since I got my phone running again my update always force closes so good for me i guess

Cannot download from the market after recovering
I had the same issue. After recovering with flashtool, I cannot download from the market. Getting an error message stating that the device does not have sufficient space. I currently have 75mb available.

That's why I have been leaving Wifi on at night.

i can download from the market jus fine i grabbed root unistaller and froze mobile care and download agent and waiting to see if that will fix it but will keep you posted
UPDATE- Seems to have done the trick so just a heads up, you might want to try it

HOW TO Install CM 10.2 (Android 4.3) for Razr M (xt907)

I am running CM 10.2 by Skrilax - http://skrilax.droid-developers.org/cm10.2nightly/razrqcom/index.php?device=xt907 (Might be fine with the DHacker version also, but this is what I used.
Pretty much everything seems to work including GPS. I do not have Bluetooth anything so I can't speak to that. Some (maybe most) people seem to have difficulty getting it installed, but it can be done. There are a few tricks to it. Here's what worked for me:
I highly recommend using TWRP 2.6.0 as that's what I use and I know it works. Not sure whether other recoveries will function the same or not.
What you need:
1. The most recent version of CM 10.2 from the link above.
2. Gapps Core 4.3 - http://goo.im/devs/BaNkS/GApps 4.3
3. Root for 4.3 - http://download.chainfire.eu/342/SuperSU/UPDATE-SuperSU-v1.43.zip
1. Erase everything except the external sdcard. Do it three times. (Don't ask, just do it.)
2. Also Format Data - what the heck, do that 3 times too.
3. Install the CM 10.2 ROM, wipe dalvik and cache again and reboot into the system. DO NOT install anything else at this time for best results.
4. Let the OS boot all the way to the desktop.
5. Unlock the developer options by going into Settings\About Phone and tapping 8 times on Build number. (Only needs done one time, updates do not hide it again.)
6. In Developer options, change Root Access to "Apps and ADB". (Go ahead and set up whatever else you want in Settings.Do not install any apps or updates at this time.)
7. Reboot into Recovery. Install Gapps Core 4.3
8. Clear dalvik and cache and reboot into System. If it hangs on the Motorola logo, get back into Recovery and format data again. (This is why I said don't install apps or updates yet.)
9. Once the phone boots all the way, reboot into Recovery again and install Root using Supersu 1.43.
10. Clear dalvik and cache and reboot into System. If it hangs on the Motorola logo, get back into Recovery and format data again. (This is why I said don't install apps or updates yet.)
11. Once System has booted, you can update SuperSu in the Google Play Store. The first time you open it, it will want to update the binary. It's very important that you choose the option to do it from Recovery. Your phone will reboot into Recovery, update the binary and then boot back into System.
12. Once all this is done, so are you. Restore your apps, allow Google Play to do any updates, and customize the layout to your tastes.
Note: Once you get a successfully installed 10.2 setup, you can dirty flash the nightlies. Always clear dalvik and cache. And always backup your apps before flashing anything if you want to make your life easier.
ENJOY!!!

Going to give it a go with CWM I'll let you know how it goes.

Well I got the rom to work but I could not get it to boot after loading gapps. I tried wiping data but no joy!

Hey, Thanks for the very clear update instructions - I'm now on CM 10.2!
I am not able to successfully root though. SuperSU complains:
"There is no SU binary installed and SuperSU cannot install it. This is a problem!
If you just upgraded to Android 4.3, you need to manualyl re-root - consult the relevant forums for your device!"
I have tried to reflash the SuperSU zip posted here multiple times to no avail...
Thoughts?
EDIT: Solved with http://download.chainfire.eu/345/SuperSU/UPDATE-SuperSU-v1.51.zip

Flashed TWRP and I was able to get it up and running having the same issue with root going to try the file above and I'll update again.
edit
*** the supersu 1.51 file worked for me as well. ***
---------- Post added at 04:43 PM ---------- Previous post was at 03:47 PM ----------
I'm still having issues. I got the root to work but everytime I reboot the device I have wipe data or it hangs on the boot logo.
---------- Post added at 05:02 PM ---------- Previous post was at 04:43 PM ----------
Restored back to carbon rom 1.8. I may try again after a few more dailies are out. As this is my primary device I can not have the issues I saw. Admittedly it may be something that I did wrong and not the rom.
Sent from my XT907 using xda premium

Got this up and running last night and no issues so far for me. I'm wondering though if any custom kernels work with 10.2? I was curious about the vanquishpuppiesn12 kernel.

kensdavid said:
Hey, Thanks for the very clear update instructions - I'm now on CM 10.2!
I am not able to successfully root though. SuperSU complains:
"There is no SU binary installed and SuperSU cannot install it. This is a problem!
If you just upgraded to Android 4.3, you need to manualyl re-root - consult the relevant forums for your device!"
I have tried to reflash the SuperSU zip posted here multiple times to no avail...
Thoughts?
EDIT: Solved with http://download.chainfire.eu/345/SuperSU/UPDATE-SuperSU-v1.51.zip
Click to expand...
Click to collapse
You must not have followed every step exactly. The process I outlined works flawlessly if it is followed exactly. I'm glad you were able to resolve it though. You ended up with the same result and that's what matters!
Sent from my XT907 using Tapatalk 4

Thanks for sharing , make a mark

netizenmt said:
You must not have followed every step exactly. The process I outlined works flawlessly if it is followed exactly. I'm glad you were able to resolve it though. You ended up with the same result and that's what matters!
Sent from my XT907 using Tapatalk 4
Click to expand...
Click to collapse
can you confirm if rear mic is working when taking videos? this has been the only hangup for me on the 4.2.2 ROMs...
I doubt it, since that functionality is probably kernel related, but still just curious...
thanks!

Ok I noticed that I had somehow installed the wrong TWRP I installed 2.6.0 today and I have so far had good luck phone is up and running and seems to be stable. At first I had some issues with a few apps throwing errors during the mass install when I sync'ed with Google but a manual download after and they installed just fine. Also the new camera app called focal has some issues for me it opened and took pics but images in gallery are blank. However the stock camera app seems to working fine at least for stills I have not tried video yet.

I've got this all working too, including root. But I've been noticing about a second delay when pressing power to unlock the phone. Sometimes it delays so long that I press power again. So when the phone does wake up, the screen goes off again from my double press of impatience. I'm running the 0907 nighlty
Sent from my XT907 using XDA Premium 4 mobile app

FWIW, never needed to wipe data multiple times and I flashed everything at once. That said, still a good procedure to follow
Also, @georgeascott, that's a known bug. It tends to SOD on occasion... Not much to do to fix except maybe overclocking
Sent from my XT907 using Tapatalk 4

Any plans for safe strap support? My bootloader is apparently permanently locked. Stock isn't terrible.. You can disable and hide bloatware.. But it would be really nice to have pie instead of soft buttons and restart and screen shot on the power menu
Sent from my XT907 using xda app-developers app

zombolt said:
Any plans for safe strap support? My bootloader is apparently permanently locked. Stock isn't terrible.. You can disable and hide bloatware.. But it would be really nice to have pie instead of soft buttons and restart and screen shot on the power menu
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Probably not, but you can get some of that functionality with root alone if you know how to mod systemui and stuff like that. Probably not the answer you're looking for but that's probably what it is...
Can always hope someone will Dev for it though
Sent from my XT907 using Tapatalk 4

sloosecannon said:
Probably not, but you can get some of that functionality with root alone if you know how to mod systemui and stuff like that. Probably not the answer you're looking for but that's probably what it is...
Can always hope someone will Dev for it though
Sent from my XT907 using Tapatalk 4
Click to expand...
Click to collapse
I have no clue how to do those things. I got really spoiled on the dinc. So many people spoon feeding contributions to a fabulous device. It sure is a shame it's impossible to unlock my boot loader
Sent from my XT907 using xda app-developers app

everything I've run into *works*
but it all doesn't work so smoothly
Scrolling and everything is kind of choppy, I mean it is definitely livable, but still choppy.

netizenmt,
Thx a lot for your help. I`m now on cm10.2, too.
But there seemed to be some bugs.
1.I cannot install any apps from Google Play Store, or it hangs on the MOTO logo after reboot.
2.I can take calls, but cannot reach the 3G network.
P.S.When I try to use QPST to configure the phone, the QPST tells Serious error encountered, write to phone aborted.

I've installed CM10.2 two weeks ago and everything is working great! The first time I flashed it I got stuck at the CM boot animation... After ten minutes spent watching it I forced it to reboot: stuck again. At this point I booted back to recovery, followed thoroughly netizenmt instructions (wipe three times, really!!!), installed CM10.2, Installed gapps, installed supersu v1.43 and so on (follow all the steps netizenmt told us!)... Everithing worked fine then. At this point I changed build.props to make the phone works in GSM mode.

fargles said:
everything I've run into *works*
but it all doesn't work so smoothly
Scrolling and everything is kind of choppy, I mean it is definitely livable, but still choppy.
Click to expand...
Click to collapse
If you go to settings/developer options and scroll down to HW overlays. Check the box to disable HW overlays. That should help with the tearing/chopping.

Also, maps FC all over the place as soon as you're using GPS.
Sent from my XT907 using xda app-developers app

WiFi problem on TW 4.4.2

I suffer from a buggy WiFi after I installed the Official TW 4.4.2 poland. When I try to turn the wifi on, it takes a very long time, then I have to re-enter the password of my home hotspot again ( each time the wifi is on ).
I tried many solutions like : factory reset, flash leak firmware, flash custom rom. But none of it corrected the problem.
When I searched through the forum I found out that I'm not the only one having this problem, as samsung changed the wifi driver in the latest rom.
Anyone that have the same problem or could help solve it feel free to express his mind.
Thanks
Sent from my SM-N9005 using Tapatalk

...Really. No reply. I have had this issue from the moment I flashed the Poland firmware and it just won'tgo away.
At first it wouldn't turn on after initial setup and google account starts restoring. At least now (after flashing and reflashing and redownloading and and ... I can't even remember now) it comes back on after a reboot but it takes a while to actually come on and I have to re-enter ssid and password etc EVERY time!... I change my mind now...:silly: take me back to a speedy 4.3 = ( The longer I use the same ROM, the happier I get with my fine-tuning - And then I go change ROM. Always regret it. I just want that one feature from that ROM integrated into mine but before I know it, I'm flash happy for days on end trying to discover a new ROM which is never better than months of tweaking the ROM you already had! This update is terrible. It lags here, there and every 15seconds it feels like.
Can you please tell me if you've managed to sort out your WiFi issue?
..Sorry for my moan. In a way (and I apologise for this) but I'm almost glad I've found someone else with the same issue.
Today I will find the solution. And let you know when I do

sixcherries said:
..Sorry for my moan. In a way (and I apologise for this) but I'm almost glad I've found someone else with the same issue.
Today I will find the solution. And let you know when I do
Click to expand...
Click to collapse
I'm happy to have your support. and I assure you that I'm looking desperately to find a solution too. back in th general thread (Official kitkat for N9005 ) I commented on 4 people having this issue. there was no support that's why I thought I'd come to Help and troubleshooting thread.

Yeh there are a couple of others with this issue but not many surprisingly. I made my first comment regarding this issue in that thread but it didn't seem to affect many.
I have downloaded every ROM that can be flashed with 4.4.2 Bootloader and I'm just about to begin trying them all. Seeing as though the problem has come in through Odin I'm not sure if flashing these ROM's through CWM will affect it.
...About to find out
---------- Post added at 12:04 PM ---------- Previous post was at 11:43 AM ----------
OMG:laugh::good:
First one I tried.. well, it's about the 4th ROM I've tried in the last few days but IT WORKS IT WORKS!
After Initial setup it usually lasts 15-20 seconds before itauto disconnects and I know from then on I have problems.
The first switch on, which is like the 3rd step in setup, Wifi flicked 'On' almost instantly and I knew it was different straight away. I've rebooted and it auto connected to my wifi!
Download and flash JACKAWAY ROM http://forum.xda-developers.com/showthread.php?t=2555247
It uses aroma installer too.
The only problem that has persisted through everything but hasn't bothered me is I get 'Force Close' of Remote Controls. Don;t know why but that is still happening.
I wonder if the misses is still talking to me ...
---------- Post added at 12:08 PM ---------- Previous post was at 12:04 PM ----------
I removed SDCard this time also. I still haven't put it back in. Just so you know, I installed, setupand rebooted first time Without SDcard inserted.
Best of luck
---------- Post added at 12:19 PM ---------- Previous post was at 12:08 PM ----------
Wifi is fast again. And it isn't lagging like it was

I got the remote controls force close too. I'm gonna try jack away right away abd see if things are gonna go as well as the went for you. But I didn't understand the sd card part of the process. Did you removed it right after you flashed the rom, befire it restarted ?
Sent from my SM-N9005 using Tapatalk

By the way, the remote control (2 of them) are for controlingyour phone from distance to lock it fir exemple if it you got robbed. It's samsung staff. So you may just wanna uninstall it
Sent from my SM-N9005 using Tapatalk

I turned the phone off completely. Then took battery off and removed the SD. Put battery back in and booted into Recovery (Vol_up + home). Then I plugged in my USBHost adapter with a 32gb USB stick which had the Jackaway ROM zip on it. Then just went to 'Install zip' -> 'choose zip from /storage/usbdisk' and selected 'Jackaway ROM.zip'
If you don't have a USB On-the-go cable, then plug into your computer and copy the ROM file to /sdcard (make sure you don't copy the file to /ExtSdCard otherwise it won't be there when you boot into recovery without the SDcard! Then turn phone 'Off'. Remove SD. andboot into Recovery. Erase data/factory reset, format /system. Choose 'Install zip from /sdcard'. Wulla
Let meknow if you get stuck
---------- Post added at 12:45 PM ---------- Previous post was at 12:43 PM ----------
Yeh I figured that was it. In titanium backup there are 3 x 'remote controls'. Don't know which one is causing the problem so i'll freeze them one by one and sort it.

Thanks man. As soon as I flash it I'll give a feed back
Sent from my SM-N9005 using Tapatalk

Same issues here. My WiFi password is forgotten and remote controls FC after every reboot. Tried everything. Weird that It only happens to a very few users. Will try Jackyaway ROM as suggested to see how it works. I personally want something as close to stock as possible.

Tried jackaway rom and it worked. Awesome !!!
Sent from my SM-N9005 using Tapatalk

Flowbax said:
Same issues here. My WiFi password is forgotten and remote controls FC after every reboot. Tried everything. Weird that It only happens to a very few users. Will try Jackyaway ROM as suggested to see how it works. I personally want something as close to stock as possible.
Click to expand...
Click to collapse
Try jackaway rom. You'll be alright
Sent from my SM-N9005 using Tapatalk

yes.mu phone have post1 problem.
why?????????????

Richard_10: fantastic = )

anyone who still have this problem can also try this rom http://forum.xda-developers.com/showthread.php?t=2641213

Same problem here with wifi. Original kitkat rom.
Will try jackaway.
?
Sent from my SM-N9005 using XDA Premium 4 mobile app

Guys try this http://forum.xda-developers.com/showthread.php?p=51180156
Sent from my SM-N9005 using XDA Premium 4 mobile app

Installing GApps in China

I've been successful before installing a new ROM when I was over VPN but recently I've tried to change ROMS and now when I restart my phone (after an install and the rom checks my apps) the phone is trying to connection to Google to make a connection but the phone constantly says that there is no connection. I know for a fact their is, if I reimage without GApps and connect to the same wifi I can log on to the internet.
Anyone have any idea how I can get around this? I hate not having my GApps on my phone and no access to the play store.

Using shadowsocks
Sent from my Nexus 6P using Tapatalk
---------- Post added at 02:27 PM ---------- Previous post was at 02:26 PM ----------
Or root and use wangdoujia uninstall Gapp
Sent from my Nexus 6P using Tapatalk

Well, China has internet censorship, aka GFW. So you gotta either connect to a wifi capable of accessing the real internet or plug your sim card out and skip all the steps to enter the system first. Then you can sideload shadowsocks apk where you can set up your server information to circumvent the GFW. Or maybe just simply set up your VPN account.

Houge_Langley said:
Using shadowsocks
Sent from my Nexus 6P using Tapatalk
---------- Post added at 02:27 PM ---------- Previous post was at 02:26 PM ----------
Or root and use wangdoujia uninstall Gapp
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Every time I try to flash GApps after the initial flash of ROM (i.e. I flash the rom, reboot, reboot to recovery, flash gapps, reboot, constantly receive error messages).
I'll do some research about the shadowsocks. Thank you.
I've also tried using wangdoujia, which is great except for all the spam I receive. I'd prefer not to have this though at the moment I might have to use this app store until I move back to the US in July.
randy6644 said:
Well, China has internet censorship, aka GFW. So you gotta either connect to a wifi capable of accessing the real internet or plug your sim card out and skip all the steps to enter the system first. Then you can sideload shadowsocks apk where you can set up your server information to circumvent the GFW. Or maybe just simply set up your VPN account.
Click to expand...
Click to collapse
I know this. My work has a direct line to Hong Kong but the problem is when connected to the wifi the phone says "Connected but no internet" but when I log into a browser I obviously have internet even though the error exists.
I will try again flashing but without my sim card in this time to see if it works. I'll update here what happens.
Ill also look into shadowsocks but if you see my comment above I always get errors when I try to flash GApps after my inital ROM install.

Nexicovx said:
Every time I try to flash GApps after the initial flash of ROM (i.e. I flash the rom, reboot, reboot to recovery, flash gapps, reboot, constantly receive error messages).
I'll do some research about the shadowsocks. Thank you.
I've also tried using wangdoujia, which is great except for all the spam I receive. I'd prefer not to have this though at the moment I might have to use this app store until I move back to the US in July.
Click to expand...
Click to collapse
You are welcome, buddy.
As you see. I live in Kunming, China. So if you want to using Gapps, you should do like this.
Flash ROM and reboot to recovery flash GApps.
Unpluging your sim card and booting
Skip the WIFI setting
Using shadowsocks NAT mode.
---------- Post added at 06:03 PM ---------- Previous post was at 05:43 PM ----------
I have missing something. when you boot in the system, the WiFi connection with a exclamation point. Do Not Worry About That. Justing Go this link download shadowsocks from github.
From now on, you need a shadowsocks account. If you could using Google in your PC/Mac, you have to find and buy one.
The other way is VPN. Many VPN have been blocked by GFW. I using Astrill in my Linux, Android and Windows. So fast and stable. You may try it.

Houge_Langley said:
From now on, you need a shadowsocks account. If you could using Google in your PC/Mac, you have to find and buy one.
The other way is VPN. Many VPN have been blocked by GFW. I using Astrill in my Linux, Android and Windows. So fast and stable. You may try it.
Click to expand...
Click to collapse
I'll try what you said and see if it works.
When you say a shadowsocks account, do you mean to set up my own server? It seems this is the only way I have found to use shadowsocks. Is there another way to get servers?
I currently am using Astrill, AirVPN and Torguard and they each work intermittently recently due to the recent changes. I hope this shadowsocks will fix my issues.

Nexicovx said:
I'll try what you said and see if it works.
When you say a shadowsocks account, do you mean to set up my own server? It seems this is the only way I have found to use shadowsocks. Is there another way to get servers?
I currently am using Astrill, AirVPN and Torguard and they each work intermittently recently due to the recent changes. I hope this shadowsocks will fix my issues.
Click to expand...
Click to collapse
Yes, you could try this one. So cheap and very stable.

Houge_Langley said:
Flash ROM and reboot to recovery flash GApps.
Unpluging your sim card and booting
Skip the WIFI setting
Click to expand...
Click to collapse
I tried this but I don't get the option to 'Skip WIFI" my skip button is grayed out and I have no way of moving forward. Any thoughts?
I signed up for the shadowsocks and it seems to be working, now I just need to be able to get my GApps working :laugh: Thanks again.

Nexicovx said:
I tried this but I don't get the option to 'Skip WIFI" my skip button is grayed out and I have no way of moving forward. Any thoughts?
I signed up for the shadowsocks and it seems to be working, now I just need to be able to get my GApps working :laugh: Thanks again.
Click to expand...
Click to collapse
You are welcome, buddy.

I still can't get past the Connection Screen. I was able to bypass it by flashing the rom, loading into the rom, reboot into recovery, flash gapps, and reboot. However The setup wizard kept crashing and I couldn't break from this screen. So I'm still stuck at the moment.
I'm downloading the stock firmware and will try flashing this to see if I get any better results.

Unable to connect to the camera because it is being used by other apps or disabled...

Unable to connect to the camera because it is being used by other apps or disabled due to security policies.
This is the error message I keep getting whenever launching my camera. I've tried factory reset but the error still persists. I can try and get a logcat but I'll be completely honest I've never done my own logcat before.
Any help appreciated, thanks for looking.

Does your camera work after a fresh reboot? Does it stop working after awhile? There might be a runaway app hogging your camera. Usual culprits are camera apps, face unlock and custom lockscreens.

dennis96411 said:
Does your camera work after a fresh reboot? Does it stop working after awhile? There might be a runaway app hogging your camera. Usual culprits are camera apps, face unlock and custom lockscreens.
Click to expand...
Click to collapse
Rebooting doesn't help. The front camera works fine until I switch over to the rear camera.

Did you change anything in the build.prop?

B4oE said:
Did you change anything in the build.prop?
Click to expand...
Click to collapse
I added the line to add navigation bar to phone (it doesn't work)

From my experience so far with the Axon 7, tweaking certain things on the build.prop crashes the phone. When I tried to make enable multi-windows by changing the "user" to "userdebug", it caused the same problem you were having. Nothing fixed it; not restarting, system wipe, changing the build.prop to its original setting... nothing. I simple had to restore my phone from a previous backup. Hopefully, you did do a clean backup of your device. If not, then that is a common rookie mistake. Sorry to break this down to you. I hope that this was helpful.

Only time I've seen this error, is when I downloaded a different camera from the Playstore and tried to open it the same time my stock camera was running in the background.
You don't have any other camera's installed or have an app that is open that uses your camera (like Snapchat, ect..)?
I'm sure you don't, but just throwing something out to try/check.

Just restore system from previous backup like B4oE said, if you did not make a backup just download one of the twrp backups uploaded by the users around the forums. make sure to download the correct version either b20 or b20_boot. what version are you on? did you root using tenfar + locked bootloader?

Nik2424 said:
Just restore system from previous backup like B4oE said, if you did not make a backup just download one of the twrp backups uploaded by the users around the forums. make sure to download the correct version either b20 or b20_boot. what version are you on? did you root using tenfar + locked bootloader?
Click to expand...
Click to collapse
I rooted with an unlocked bootloader. I imagine I need b20-boot then?

CaiKroll said:
I rooted with an unlocked bootloader. I imagine I need b20-boot then?
Click to expand...
Click to collapse
Yup, you can use the system uploaded by DrakenFX I guess.
check out his thread: http://forum.xda-developers.com/axon-7/how-to/guides-info-info-a2017u-bootloader-t3440254
post number 4.
best of luck

I just ended up deleting the stupid camera and installing OPEN CAMERA from play store and it works 10000 times better.
Sent from my ZTE A2017U using XDA-Developers mobile app

Nik2424 said:
Yup, you can use the system uploaded by DrakenFX I guess.
check out his thread: http://forum.xda-developers.com/axon-7/how-to/guides-info-info-a2017u-bootloader-t3440254
post number 4.
best of luck
Click to expand...
Click to collapse
Thank you