no.1 d5 clock when my update ,It was cut.
now my phone will not turn on
does not see computer.
what should I do.please help
Have you tried the disconnect battery trick and re flash it with the computer
http://forum.xda-developers.com/showpost.php?p=65665951&postcount=608
2234jones said:
Have you tried the disconnect battery trick and re flash it with the computer
http://forum.xda-developers.com/showpost.php?p=65665951&postcount=608
Click to expand...
Click to collapse
I thank you.time I returned.
I'm really grateful for your attention
No.1 f5
Hello
Probably the wrong forum but I couldn’t find a thread and no idea to open a new one.
I have an sport watch. No.1 f5 that is stuck in dfu mode only the heart sensor light is on and the watch doesn’t turn on.
It go to connect it with nrf toolbox but I don’t have a firmware for it.
Just wondering if I can kick it out of dfu mode or maybe someone can upload a firmware for it.
Thank you.
Hi all.
I have a problem. In TWRP i use advanced wipe and i deleted system from watch. Now i cant boot into recovery.
System isnt present and combination (hold upper button + power-middle button) is not function.
If i power on watch, there is only "globe" and nothing happend. If i connect watches to PC, ADB call me offline or unauthorized.
I cant use debbuging mode without system and cant authorize PC, because i see the globe.
MTK Droid Tools write no connection.
Can anyone help me?
Thank you.
EDIT: SOLVED!!! http://forum.xda-developers.com/showpost.php?p=67200294&postcount=166
Hi Guys
Today my k88h watch arrived and one of the first things I did was put some new faces onto it....one of them didn't work so I selected one that did work and tried to delete the broken one with mediatek app, the app froze and kicked me off while the watch was in the process of deleting the broken watchface.
So now my watch only turns on and goes black screen and when I try the reset trick it hangs on the usbmedia screen, is there a way to reflash the firmware? I cannot find the firmware or flashing tools someone show me what I'm doing wrong please.
Hi I'm new for this forum II have a lenovo vibe k4 note that will be bricked during upgrade session...I'm already used RR version 5.8.5. when I tried to next update my phone stuck up at and not finish to flash but I'm waiting to long,then my phone has reach a battery low and will it be turn off.I'm try to open but stuck at logo LENOVO.to solved I'm flash a firmware s232 using sp flash tool but I'm worst I have no luck when my phone connect to USB its automatically open up and vibrate when I pressed DOWNLOAD button in sp flash tool.Please help me how to re flash or downgrage my phone when its come like this
PS. Sorry my bad english
Press Download button fist, then connect your phone after. Charging your phone to full, then try again. Maybe you should to change the usb port or download the other rom (I downloaded from firmwarefile.com)
chuate92 said:
Press Download button fist, then connect your phone after. Charging your phone to full, then try again. Maybe you should to change the usb port or download the other rom (I downloaded from firmwarefile.com)
Click to expand...
Click to collapse
Thank you for your time sir but I have no luck when I pressed Download button then connect USB phone to computer its vibrate and screen open lenovo logo display that's why sp flash tool didn't work
jblonz said:
Thank you for your time sir but I have no luck when I pressed Download button then connect USB phone to computer its vibrate and screen open lenovo logo display that's why sp flash tool didn't work
Click to expand...
Click to collapse
Did you install driver for you smartphone? And try this: on flash tool go Options --> option ... --> connection, choose "with battery".
Replace Cable for Mobile not Other Cable
chuate92 said:
Did you install driver for you smartphone? And try this: on flash tool go Options --> option ... --> connection, choose "with battery".
Click to expand...
Click to collapse
Maybe cable didn't work caused cable be used is for jbl.
First install Mediatek USB Drivers and then click on download button and after that connect your phone. And that should help you.
Assuming that your pc has already been installed with mediatek usb drivers,you have to click download first and then connect usb to mobile(must be in shutdown mode) by holding both volume buttons,then after at max 2 min downloading will be done. This process has worked fine with me...hope it helps...
chuate92 said:
Did you install driver for you smartphone? And try this: on flash tool go Options --> option ... --> connection, choose "with battery".
Click to expand...
Click to collapse
I had choose with battery option , latest lenovo usb driver installed then after pressing download and then connecting my phone it does Nothing it shows logo and starts charging in power off mode please do something???????
Waiting for your reply
Did u get it to work
How about now ? Have you found a solution to your problem? I also need the same solution because I can't flash with the error that always appears s_ft_enable_dram_failed.
Hey there everyone !!
I have a Montblanc Summit 2 + smartwatch which has been having trouble connecting to my Wear OS app.
I have already tried all possible solutions that are available - 1) Factory Reset from Recovery mode 2) Disconnect and Reset watch from the settings menu of the watch 3) Wipe / Erase from the fastboot menu 4) Wipe / Erase Cache from the fastboot menu 5) Installing / Uninstalling / Reinstalling Android Wear OS app from the Play store
The watch refuses to connect and I have also noticed that the BLUETOOTH fails to come on when checking the bluetooth status through adb menu.
I have not been able to find a compatible recovery image for the watch to root it, which is another dead end for me.
I have exhausted all possible methods and need some assistance from the XDA community.
Any ideas ?
Could anyone help me with the stock image / firmware for the watch and a comatible recovery so I can flash the stock firmware again ?
Thanks in advance !
Hi
gkautomation said:
Hey there everyone !!
I have a Montblanc Summit 2 + smartwatch which has been having trouble connecting to my Wear OS app.
I have already tried all possible solutions that are available - 1) Factory Reset from Recovery mode 2) Disconnect and Reset watch from the settings menu of the watch 3) Wipe / Erase from the fastboot menu 4) Wipe / Erase Cache from the fastboot menu 5) Installing / Uninstalling / Reinstalling Android Wear OS app from the Play store
The watch refuses to connect and I have also noticed that the BLUETOOTH fails to come on when checking the bluetooth status through adb menu.
I have not been able to find a compatible recovery image for the watch to root it, which is another dead end for me.
I have exhausted all possible methods and need some assistance from the XDA community.
Any ideas ?
Could anyone help me with the stock image / firmware for the watch and a comatible recovery so I can flash the stock firmware again ?
Thanks in advance !
Click to expand...
Click to collapse
HI,
I have a similar problem. Did you manage to sort yours out?
I need to flash it as well
DrXDA333 said:
Hi
HI,
I have a similar problem. Did you manage to sort yours out?
I need to flash it as well
Click to expand...
Click to collapse
Same issue here lads.. or ladettes. (its 2022).
If you do find one, please drop the link here too...
Thanks