Database Users

How can i fix bricked lemfo gw01?

Hi friends, i use my smartwatch gw01 with fundo app, today i try the clock faces in the app. But when i erase the clock face on screen the watch just show black screen. I think its bricked. So how can i fix this situation?

try hard reset at first. (press power button 10 - 15 sec) If it does not help, try to install Mediatek smartdevice app from Playstore. There are some watchfaces too. Install it. Or - try to flash firmware (ask Lemfo for it)

Hello buddy i need to know if you solved that and how because i have the same problem. thanks

Nathanaeltc said:
Hello buddy i need to know if you solved that and how because i have the same problem. thanks
Click to expand...
Click to collapse
Hello.
I destroyed my GW01 in first day, and I found the solution the same day.
You have to use "Flash tool" program. And usb driver also is needed.
Press "format" in program during connection via USB, and press and hold clock bottom.
After fiev seconds You have a new clock.

my Gw01 smartwatch's touch suddenly not working and i cant reset it via hard reset and it can't be connect with pc coz i m not able to switch to mass storage in smartwatch. pls provide any flash tool program for pc so i can connect and flash my smartwatch.

HARD BRICK LG K8 (K350n)

Hello, I'm new to this topic and recently wanted to upload custom room on lg k8 and it turned out that it is on the 6735M mediatrix chipset and not on 6735
by twrp which I started by ADB and something has fallen down, I do not have access to the download mode, it turns on but immediately I get a message that the device is damaged, I manage to enter a hard reset but after pressing ok is the same as the download mode. So how can I fix my phone?
Help please, I'm sorry but I'm weak in English and I write from a translator.

You get the message "device corrupted"?
Since I guess you didn't managed to actually flash the file only thing you have to do is to flash stock firmware, on this forum should be a guide how to do it if you don't know how to. And don't try to flash any ROM on your device because it doesn't exist, do a research next time before you do something like this.

Yes, I get a ""device corrupted" message, but can I flip it if I can not get into the download mode, can you know how to enter META mode on lg k350n? Can you save him yet?

Professor Woland said:
You get the message "device corrupted"?
Since I guess you didn't managed to actually flash the file only thing you have to do is to flash stock firmware, on this forum should be a guide how to do it if you don't know how to. And don't try to flash any ROM on your device because it doesn't exist, do a research next time before you do something like this.
Click to expand...
Click to collapse
Yes, I get a ""device corrupted" message, but can I flip it if I can not get into the download mode, can you know how to enter META mode on lg k350n? Can you save him yet?

Meta mode? What is that supposed to be? Translator doesn't make much sense when it's used to translate whole sentences.
Well honestly I don't remember what is procedure to recover device but I'll look into it and let you know in the meantime you look into guides on this sub forum to see if anything works.

Or maybe contact points, only where they are. Download mode I have no access all the time, it does not turn on.
HELP PLEASE!

do this
dawid1256 said:
Hello, I'm new to this topic and recently wanted to upload custom room on lg k8 and it turned out that it is on the 6735M mediatrix chipset and not on 6735
by twrp which I started by ADB and something has fallen down, I do not have access to the download mode, it turns on but immediately I get a message that the device is damaged, I manage to enter a hard reset but after pressing ok is the same as the download mode. So how can I fix my phone?
Help please, I'm sorry but I'm weak in English and I write from a translator.
Click to expand...
Click to collapse
my K8 (LGX240AR) was hard bricked and i fixed using this guide:
https://forum.xda-developers.com/cr...tion-android-one-hard-bricked-device-t3361988

Need help with Bricked Chinese smartwatch diggro di03 :/

I bought the diggro di03 but it was randomly disconecting from my phone ( Xiaomi running miui 9.5).
I then decided to update the firmware
I followed the guide diggro provides and used the correct firmware, however, my watch is now bricked….
I don't know, for sure, what went wrong but i suspect that i flashed it with the option:
"Usb download/readback "
instead of
"usb download/readback (DATA CARD)"
It is still detected on the software (COM3) and i can still flash firmwares onto it, but nothings seems to bring it back to life.
The only thing it does now is blink the heart sensor whenever i press the power button and when i release it.
Guide i used: http://www.chinawatchs.com/mtk-smartwatch-update-the-proper-way/
firmware : https://www.diggroapp.com/diggro-firmware/
If you know what i should do plz answer as i love the looks of the watch and would like to keep it (functioning)
Thank you reading this

Onn Surf 8 Pro (100003561) Bricked

Is there anyway to unbrick my onn surf 8? It shows the boot logo then turns off. I tried fastboot and SP Flash tool. Nothing works please help. Please provide me a rom supported with the model number 100003561

joshilita said:
Is there anyway to unbrick my onn surf 8? It shows the boot logo then turns off. I tried fastboot and SP Flash tool. Nothing works please help. Please provide me a rom supported with the model number 100003561
Click to expand...
Click to collapse
Deadman posted a few images for that device:
https://forum.xda-developers.com/showthread.php?p=82619259#post82619259
Given what you describe, it sounds like your battery may be almost dead. You may still be able to get away with that in sp tools but it would be better if you could make sure you have at least a %30 charge. SP tools takes some getting used to, if you need help let me know. I'll try to keep an eye open for updates on this thread.

will160628 said:
Deadman posted a few images for that device:
https://forum.xda-developers.com/showthread.php?p=82619259#post82619259
Given what you describe, it sounds like your battery may be almost dead. You may still be able to get away with that in sp tools but it would be better if you could make sure you have at least a %30 charge. SP tools takes some getting used to, if you need help let me know. I'll try to keep an eye open for updates on this thread.
Click to expand...
Click to collapse
I don't think it works. I charged my tablet all night and i tried to use the SP flash tool again. I used the firmware started the download before connecting USB. I hear the tablet disconnecting and reconnecting constantly and SP flash tool doesnt find the device because the constant reconnecting.

I got somewhere with the fastboot. It showes the Orange State warning. It never showed that before. But it reboots back to the loading after 5 seconds I cant make it stop.

fixed
Okay, update. I dont know what I did but i think i unbricked the tablet. Is there any TWRP file for 100003561?

Has anyone succeeded in repairing a bricked Poco M3?

My M3 was working perfectly. I put it to restart and then it didn't turn on anymore. It is now only recognized as "Qualcomm HS-USB QDLoader 9008" on Windows. I opened the phone and with some magical combination (remove/connect flat cables from the battery and display, connect the USB cable, press volume keys and short the test points) it started in fastboot. So I was able to flash the "fastboot ROM". Unfortunately, on the next boot it still does not turn on normally. Has anyone succeeded in repairing the Poco M3? In Mi Flash is requested an authenticated account to flash through it, is it worth paying someone to provide the account? Does anyone have the contact of someone who makes cheap? Any help is welcome, thank you!

me too

waiting, someone pls

LeandroFarias said:
waiting, someone pls
Click to expand...
Click to collapse
I kind of managed to get my Poco M3 to start on Android (but it's not fully fixed).

That is the points

vinod3362 said:
That is the points
Click to expand...
Click to collapse
What?

me too. after i reboot my poco m3. it came to black and wont boot up. i google everything, the only need to flash is to modified the firehose. badly needed.

KaMyKaSii said:
My M3 was working perfectly. I put it to restart and then it didn't turn on anymore. It is now only recognized as "Qualcomm HS-USB QDLoader 9008" on Windows. I opened the phone and with some magical combination (remove/connect flat cables from the battery and display, connect the USB cable, press volume keys and short the test points) it started in fastboot. So I was able to flash the "fastboot ROM". Unfortunately, on the next boot it still does not turn on normally. Has anyone succeeded in repairing the Poco M3? In Mi Flash is requested an authenticated account to flash through it, is it worth paying someone to provide the account? Does anyone have the contact of someone who makes cheap? Any help is welcome, thank you!
Click to expand...
Click to collapse
how do you get into fastboot?? i tried mine but it wont boot in fastboot. i'm stuck in QDLoader.

did someone successfully recover their bricked poco m3 ?

gasleak08 said:
did someone successfully recover their bricked poco m3 ?
Click to expand...
Click to collapse
nothing yet. we need firehose to bypass miflash authentication. or drain the battery then press vol down + power for 10secs.

KaMyKaSii said:
I kind of managed to get my Poco M3 to start on Android (but it's not fully fixed). Are you Brazilian too? Call me on telegram
Matheus
You can contact @MatheusCoelho1998 right away.
t.me
Click to expand...
Click to collapse
can u tell me how?mine too?

my phone has bricked with UBL condition and i flash whole partition with twrp and magisk to solve the heating problem now its alive again

I just wait till the battery totally discharge and then plug in the charger,sofar been through this problem for 2x,the first one for 2 days and 5 days for later because the battery was full.
This happens when Im restarting the device and now even there is a new update,Im still scare to update my device to the latest firmware incase it wont boot again.
Should I try to update or nah,guys?

Minoda86 said:
I just wait till the battery totally discharge and then plug in the charger,sofar been through this problem for 2x,the first one for 2 days and 5 days for later because the battery was full.
This happens when Im restarting the device and now even there is a new update,Im still scare to update my device to the latest firmware incase it wont boot again.
Should I try to update or nah,guys?
Click to expand...
Click to collapse
do not try to update it... i tried 3 times their own ota update broke the phone os which makes it unable to go to recovery or fastboot. i will try and see if i can update firmware and fix itself

yankee77 said:
do not try to update it... i tried 3 times their own ota update broke the phone os which makes it unable to go to recovery or fastboot. i will try and see if i can update firmware and fix itself
Click to expand...
Click to collapse
I did update it and now my phone wont boot at all,after the battery hits 1%,it just wont do anything and its been 2 weeks,pc does detect it as qualcom loader but flashing without auth wont work,Im just waiting for firehose file for this stupid phone.People with auth asking for $30 for fixing it but without guarantee that it will work,what a joke.
So did you fix your phone?

yankee77 said:
do not try to update it... i tried 3 times their own ota update broke the phone os which makes it unable to go to recovery or fastboot. i will try and see if i can update firmware and fix itself
Click to expand...
Click to collapse
Yeahhh,my phone finally boot up!
But sadly the latest update failed to install.Guess I should just wait until someone patch the firehose file and try not to update until then.Fingercross!

i fixed the deadboot issue. but it wont fix the restart deadboot. try to flash every region and version firmware both recovery and fastboot. the problem still there.

vinzikidz said:
i fixed the deadboot issue. but it wont fix the restart deadboot. try to flash every region and version firmware both recovery and fastboot. the problem still there.
Click to expand...
Click to collapse
how did u fix deadboot can you elaborate? how did you flash from edl ?

gasleak08 said:
how did u fix deadboot can you elaborate? how did you flash from edl ?
Click to expand...
Click to collapse
sorry, there's is no tutorial for this and it has a quite process. you just need to throttle the proc temperature of your phone board using hot blower or any device you have. while your phone is in high temp. both pin board and battery is in unplug hold vol down then put back the board pin and battery pin at the same time. it will vibrate and fastboot will be fine.

Guys this is my procedure to turn on the phone:
I can make it turn on Android after messing with the battery and sub-board cables but this is just a workahound, trying to turn it on normally through the power button always makes it turn on in edl mode
But opening the device voids the warranty, so anyone who has access to a repair center is better off asking for the warranty
What to do:
1. Disconnect the battery cable and the secondary board cable.
2. Connect charger.
3. Hold the power button.
4. Connect the secondary board cable and quickly connect the battery cable.
5. Release the power button when the device vibrates.
It doesn't always work the first time, you may need several tries to get it
VID_20210514_152510.mp4
drive.google.com