Related
Hi.
My Leeco le s3 x626, helio x20 is bricked with red light.
I Just work with win7, Windows 10, but don't work.
It is recognised like
Mtk usb and with mtk preloaded.
Flashtool, with download give back error or doesn't start.
I see guide for mediateck x6...
b1gb1ng said:
Hi.
My Leeco le s3 x626, helio x20 is bricked with red light.
I Just work with win7, Windows 10, but don't work.
It is recognised like
Mtk usb and with mtk preloaded.
Flashtool, with download give back error or doesn't start.
I see guide for mediateck x6...
Click to expand...
Click to collapse
Hello, if you're still looking for a way to restore, then write to me in private messages, I'll help you with this deal)
bricked my Leeco le s3 x626
AxtExpos said:
Hello, if you're still looking for a way to restore, then write to me in private messages, I'll help you with this deal)
Click to expand...
Click to collapse
Hi, i am new to this and i just bricked my Le s3 x626. please help me. the phone is just showing a red blinking light when i connect the usb cable to charger or pc. tahnks
I have the same problem...
leeco le x626 red light brick
AxtExpos said:
Hello, if you're still looking for a way to restore, then write to me in private messages, I'll help you with this deal)
Click to expand...
Click to collapse
Please what is the solution i need help mine also bricked while trying to root
Hi,
i have the same problem - stuck on red light.
Its recommended to use SP Flashtool to flash Stock.
Before, installing correct VCOM drivers. I've done that successfully.
But now...
I need the Stock ROM for this LeEco Le S3 X626 WITH the scatter file (MT6797_Android_scatter) that is needed for SP Flashtool.
None of the downloadable Stock ROMs i could get contain this scatter file. These Stock ROMs are all for devices that can still access fastboot.
This brick, stuck on red light can't access fastboot anymore..........
Any help? i need this ROM with the scatter file... please!
majo334 said:
Hi,
i have the same problem - stuck on red light.
Its recommended to use SP Flashtool to flash Stock.
Before, installing correct VCOM drivers. I've done that successfully.
But now...
I need the Stock ROM for this LeEco Le S3 X626 WITH the scatter file (MT6797_Android_scatter) that is needed for SP Flashtool.
None of the downloadable Stock ROMs i could get contain this scatter file. These Stock ROMs are all for devices that can still access fastboot.
This brick, stuck on red light can't access fastboot anymore..........
Any help? i need this ROM with the scatter file... please!
Click to expand...
Click to collapse
I have the files you need.
blueasteroid said:
I have the files you need.
Click to expand...
Click to collapse
Hey, i also recently bricked my phone, it has the red light problem and i have the flash tool installed, i am looking for a rom with the scatter files or the files themselves since i can't access fastboot, could you send them over?
Here you have some.
https://www.leakite.com/2017/09/download-letv-le-s3-x622-stock-firmware-flash-file.html
https://bbs.le.com//zt/eui/le_2.html
https://mega.nz/#F!MI9w3T6L
password: !YMutE59mUDbdOs9BoYY59Q
https://www.youtube.com/watch?v=xOKFI_eFq9o
blueasteroid said:
Here you have some.
https://www.leakite.com/2017/09/download-letv-le-s3-x622-stock-firmware-flash-file.html
https://bbs.le.com//zt/eui/le_2.html
https://mega.nz/#F!MI9w3T6L
password: !YMutE59mUDbdOs9BoYY59Q
https://www.youtube.com/watch?v=xOKFI_eFq9o
Click to expand...
Click to collapse
i am panicked
so so so panicked
i tried everything i could already but it is giving me errors and the red led persists, i followed https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937 but it doesn't work at all, just gives me a lot of errors that when i google nothing turns up, when i try to flash only the preloader alone it gets me somewhat through the process but gets stuck and there pops up the same error as always, i will try your files (as i was using the ones provided in the tutorial) tomorrow and report back, thanks for posting them so quickly.
marksklava said:
i am panicked
so so so panicked
i tried everything i could already but it is giving me errors and the red led persists, i followed https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937 but it doesn't work at all, just gives me a lot of errors that when i google nothing turns up, when i try to flash only the preloader alone it gets me somewhat through the process but gets stuck and there pops up the same error as always, i will try your files (as i was using the ones provided in the tutorial) tomorrow and report back, thanks for posting them so quickly.
Click to expand...
Click to collapse
Read the last post in that thread. 2 days ago I was like you. Read carefully.
i don't know at all, but it actually sounds like u didn't have the correct files before... i hope at least! things should work out with tutorials and instructions, i mean we're not that dumb right? but if we don't have the exact matching files..........
i will also try the same procedure with the new files thanks ALOT to blueasteroid, and write my results here.......
marksklava, are u actually on a L3 x626 aswell? cause most seem to operate with a x622
majo334 said:
i don't know at all, but it actually sounds like u didn't have the correct files before... i hope at least! things should work out with tutorials and instructions, i mean we're not that dumb right? but if we don't have the exact matching files..........
i will also try the same procedure with the new files thanks ALOT to blueasteroid, and write my results here.......
marksklava, are u actually on a L3 x626 aswell? cause most seem to operate with a x622
Click to expand...
Click to collapse
i am on an x626, it has a 21 mp camera and i bought it from china, sorry for not replying for 4 days.
---------- Post added at 02:14 PM ---------- Previous post was at 01:50 PM ----------
I get errors still, i believe it is a drivers issue but i don't really know how to fix it, i have tried uninstalling the drivers and installing the ones needed but they do not work at all. What do i do now? Am i out of options? What are the drivers supposed to look and how do i install them? i installed the ones that were provided in the inf file, those give me error 10 and my phone keeps disconnecting and connecting on a different COM port, although the driver seems to be installed, can someone help? If anyone is kind enough to screenshare with me i can do that via skype, discord and teamviewer, i also found a 5 year old camera here so i can catch any errors on video with my phone in the frame now which could be useful. Thanks for reading this, please help me any way you can, every bit helps.
marksklava said:
i am on an x626, it has a 21 mp camera and i bought it from china, sorry for not replying for 4 days.
Click to expand...
Click to collapse
Don't panic, i figured out this thing yesterday with my x626, it was successful and was not too hard in the end! don't worry much about the drivers, its completely normal that u lose connection all the time, it happens to all of us with bricked LeEco. The drivers won't keep still for the procedure, its normal...... I worked with the drivers in the Unbrick LeEco folder from blueasteroid. I installed all the stuff there was, and Windows said: Preloader VCOM 10 - it still switched but this is normal!
It is necessary to have the correct files, the correct paths in SPFlashtool and it only worked (for me) with DA_PL_HIGH and the pressing of buttons on the phone (Pow and Vol- holding it all the time). There was no BROM Error anymore and it all worked out.
All i can say don't give up, i have been at this point since beginning of December and now i finally got it unbricked! as much BROM errors u get, don't lose patience, keep on doing... u will finally find the right timing by happenstanc and it will work. The part after it is not that problematic then.
Check this thread, its very active at the moment and imo very very helpful: https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937/page5
Read the last pages...
leeco s3 x626 bricked
i also have the same problem with 4gb-32gb from the first day . Bricked after "fastboot reboot" command.
I tried to repair with flash_tools.exe but without success. I also tried various drivers.
Hello.
If anyone can help me... LeEco X625, blocked on red led, not charging, not connecting on PC, just red led when connect.
NOT seen in device manager.
jonyx87 said:
Hello.
If anyone can help me... LeEco X625, blocked on red led, not charging, not connecting on PC, just red led when connect.
NOT seen in device manager.
Click to expand...
Click to collapse
Same problem with mine. I once hard bricked mine, but whenever i connect to PC it gives sound, i was able to restore the phone @Long run. Few weeks after, i went to charge the phone and the phone went off, ever since then, not charging, no signs nor sounds when connected to PC... Took it to Engineers and all they say is dat i need to change the board... I'm so sad because i used all the money in my account to get the phone. The phone is still enjoying inside my wardrobe
Hi,
It looks my tablet got hardbricked. Apparently, it looks like it was turned off completely automatically, when in sleep mode. When it's powered off now - pressing power button for a while makes nothing. When connected to charger - white LED flash is blinking only and when trying to power on, and there is no "Lenovo" logo at all. I've tried some of "power cycle" tutorials - but no luck. Once, when using power button, tablet was vibrating crazily and screen blinked, but it was shut down after moment.
Sorry, if there is existing similar thread - this tablet is not very popular. If there is any "magic trick" to make it work, I'll be grateful, if now - probably I'll need to flash new firmware. Currently, I'm discharging it completely.
Best regards.
wxtester said:
Hi,
It looks my tablet got hardbricked. Apparently, it looks like it was turned off completely automatically, when in sleep mode. When it's powered off now - pressing power button for a while makes nothing. When connected to charger - white LED flash is blinking only and when trying to power on, and there is no "Lenovo" logo at all. I've tried some of "power cycle" tutorials - but no luck. Once, when using power button, tablet was vibrating crazily and screen blinked, but it was shut down after moment.
Sorry, if there is existing similar thread - this tablet is not very popular. If there is any "magic trick" to make it work, I'll be grateful, if now - probably I'll need to flash new firmware. Currently, I'm discharging it completely.
Best regards.
Click to expand...
Click to collapse
Are you still bricked? There is the firmware flashing method using SP Flash Tool which restores both the 850F & 850M to full factory condition. Let me know if you need the method and I'll get you links to the guides here on XDA.
AeonFlux1603 said:
Are you still bricked? There is the firmware flashing method using SP Flash Tool which restores both the 850F & 850M to full factory condition. Let me know if you need the method and I'll get you links to the guides here on XDA.
Click to expand...
Click to collapse
Yes. I've asked for help guy from unauthorized repair service, he said device is completely bricked, probably EEPROM chip is broken. But ok, you can send me this instruction of course
wxtester said:
Yes. I've asked for help guy from unauthorized repair service, he said device is completely bricked, probably EEPROM chip is broken. But ok, you can send me this instruction of course
Click to expand...
Click to collapse
I've had two 850F devices hard bricked and was able to recover using SP Flash Tool and a stock firmware package. I'll get you the method posted here. But, out of curiosity, how did you hard brick yours?
(The 850F is pretty much an 850M without SIM/data connectivity support. They also have slightly different chipsets, but many of the specs are very similar. So, I know the method will work on both variants of the Tab3 8.
AeonFlux1603 said:
I've had two 850F devices hard bricked and was able to recover using SP Flash Tool and a stock firmware package. I'll get you the method posted here. But, out of curiosity, how did you hard brick yours?
(The 850F is pretty much an 850M without SIM/data connectivity support. They also have slightly different chipsets, but many of the specs are very similar. So, I know the method will work on both variants of the Tab3 8.
Click to expand...
Click to collapse
Hey, thanks for you reply! As I'm not owner of the tablet, it's hard to say how it was bricked. It was on stock firmware, it was not rooted and TWRP was not installed. I've helped to configure this tablet, tablet was turned off everyday at 11PM automatically, and powered on manually, by device owner. She said sometimes instead of powering on to Android, it was booting into FASTBOOT mode (green android image). Once, it just failed to boot, without any reaction. I've tried to recover it using Windows machine, when plugging it into computer (no matter, with, or without Vol+ pressed) it was recognized as Unknown device (instead of Qualcomm, or something). I've tried many drivers - but with no luck, device was not recognized. Also, I've tried 2 machines with Win7 & Windows XP. I've managed to reboot device using power key long pressed, but starting from this point device was not recognized at all... When plugged into USB, nothing was happening. Service guy said he was able to make his computer recognize device using some technical cable plugged directly with motherboard, but all methods to flash firmware failed. He said probably EEPROM chip is broken completely and replacing this part is half of device cost. Thing is, this tablet was bought from China - so no guarantee at all. Well, probably she need to buy next tablet from local electronic store...
wxtester said:
Hey, thanks for you reply! As I'm not owner of the tablet, it's hard to say how it was bricked. It was on stock firmware, it was not rooted and TWRP was not installed. I've helped to configure this tablet, tablet was turned off everyday at 11PM automatically, and powered on manually, by device owner. She said sometimes instead of powering on to Android, it was booting into FASTBOOT mode (green android image). Once, it just failed to boot, without any reaction. I've tried to recover it using Windows machine, when plugging it into computer (no matter, with, or without Vol+ pressed) it was recognized as Unknown device (instead of Qualcomm, or something). I've tried many drivers - but with no luck, device was not recognized. Also, I've tried 2 machines with Win7 & Windows XP. I've managed to reboot device using power key long pressed, but starting from this point device was not recognized at all... When plugged into USB, nothing was happening. Service guy said he was able to make his computer recognize device using some technical cable plugged directly with motherboard, but all methods to flash firmware failed. He said probably EEPROM chip is broken completely and replacing this part is half of device cost. Thing is, this tablet was bought from China - so no guarantee at all. Well, probably she need to buy next tablet from local electronic store...
Click to expand...
Click to collapse
Yeah, the service guy is full of it without any doubt. Using a modded fastboot cable, like he was likely referring to, will not only fail to push firmware to the eMMC, but will very likely damage or corrupt the partition index. I can't promise my method will work, but I can say with some certainty that it will. Ok, first things firstt: install the latest SP Flash Tool on your Windows PC or laptop. Also, you will need to install the latest vCOM drivers (for the Mediatek chipset). Do you know how to do this or do you need links? I can post a link for unbricking the 850F, which has been reported to work on 850M, but the thread is a bit erratic and non-concise. It will be much easier if you and I do this step by step. Also, you will need a stock firmware package for your 850M (build version is not relevant). Do you have one or do you need a link?
In a nutshell, this method will do an emergency recovery by directly pushing a stock firmware package to the device's eMMC flash memory. Although your PC is not currently recognizing your device, the vCOM drivers/SP Flash Tool, & your volume down button, will force recognition of the Mediatek chipset. Again, I cannot promise this will be successful, but I can say I've not yet seen a single hard bricked Tab 3 that could not be recovered from a hard brick this way.
Step 1 -- install the latest vCom drivers on your Windows (7, 8.1, or 10) PC/laptop. Here is an excellent XDA tutorial that provides sources and detailed instructions. https://forum-xda--developers-com.c...-10-mtk-vcom-usb-drivers-32-64-t3267033/page1 Sorry for the lengthy url.
Step 2 -- install the latest SP Flash Tool on your PC or laptop. Go to this website for download sources; https://spflashtool.com/
Step 3 -- download a stock firmware package for your TB3-850M. This is a link for a solid firmware package, confirmed to work (take note that build version isn't a factor. The SP Flash Tool will push a downgrade, upgrade, or collateral installation {same build version}): https://cloud.mail.ru/public/LHhe/NkpAi7WuL
When you've completed the above 3 steps, let me know and we will go forward with the firmware recovery process. :good:
I have the same issue. I dont know how but i got hard bricked completely. I was flashing rom on it and it got bricked. Now service centre guy is saying that i have to change motherboard altogether. But your post seems convincing. Please let me know the next detailed process.
i have the same issue.
one day stop working
AeonFlux1603 said:
Yeah, the service guy is full of it without any doubt. Using a modded fastboot cable, like he was likely referring to, will not only fail to push firmware to the eMMC, but will very likely damage or corrupt the partition index. I can't promise my method will work, but I can say with some certainty that it will. Ok, first things firstt: install the latest SP Flash Tool on your Windows PC or laptop. Also, you will need to install the latest vCOM drivers (for the Mediatek chipset). Do you know how to do this or do you need links? I can post a link for unbricking the 850F, which has been reported to work on 850M, but the thread is a bit erratic and non-concise. It will be much easier if you and I do this step by step. Also, you will need a stock firmware package for your 850M (build version is not relevant). Do you have one or do you need a link?
In a nutshell, this method will do an emergency recovery by directly pushing a stock firmware package to the device's eMMC flash memory. Although your PC is not currently recognizing your device, the vCOM drivers/SP Flash Tool, & your volume down button, will force recognition of the Mediatek chipset. Again, I cannot promise this will be successful, but I can say I've not yet seen a single hard bricked Tab 3 that could not be recovered from a hard brick this way.
Step 1 -- install the latest vCom drivers on your Windows (7, 8.1, or 10) PC/laptop. Here is an excellent XDA tutorial that provides sources and detailed instructions. https://forum-xda--developers-com.cdn.ampproject.org/v/s/forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033/amp/?amp_js_v=a2&_gsa=1&usqp=mq331AQCCAE=#aoh=15510379323239&_ct=1551037935701&referrer=https://www.google.com&_tf=From %1$s&share=https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033/page1 Sorry for the lengthy url.
Step 2 -- install the latest SP Flash Tool on your PC or laptop. Go to this website for download sources; https://spflashtool.com/
Step 3 -- download a stock firmware package for your TB3-850M. This is a link for a solid firmware package, confirmed to work (take note that build version isn't a factor. The SP Flash Tool will push a downgrade, upgrade, or collateral installation {same build version}): https://cloud.mail.ru/public/LHhe/NkpAi7WuL
When you've completed the above 3 steps, let me know and we will go forward with the firmware recovery process. :good:
Click to expand...
Click to collapse
what is next? i have a tab 3 710f that is very dead.. hardbricked in wont boot into nothing.. black screen like its shut down
Hello!
THink I have bricked my phone, but just checking before I go through what I suppose is a long process with oneplus.
Looking for any help. I had a working device - unlocked bootloader and installed TWRP and magisk using MauronofrioTool. ok - however, I found out I couldn't use a fingerprint security option on that would have been anoying. So... Long story short. I used MauronofrioTool to relock bootloader. Oops - so that didn't work. THen found out I couldn't do anything except stare at g.co/ADH message on my screen. Couldn
't get to fastboot or TWP. ANyway, so I managed to up and down volume and enter into TWRP. Was still connecting to the tool, so I downloaded factory Zips and tried to install via tool after unlocking - Seemed to be working ... but it stopped mid way through a process and hasbn't come back! NOthing at all. I wonder if I could have triggered an OEM thing? ANyway - literally nothing no buttons work no screen action. I see a QUSB_BULK_CID:etc number when connecting the phone, but that is it. No fast boot or any other actions available.
PLease, pretty devastating, Anyone know if I can do anything?
I'm no pro but I use this tool which helped me:
henk-jan said:
I'm no pro but I use this tool which helped me:
Click to expand...
Click to collapse
Thank you. I feel I am little past this stage now though.. Also trying the brick reprieve software . Just can't get my computer to recognise the phone now. No ability to get to emergency download path - think it is my crappy cihinese pc (old Huawei tablet basically) or Windows via apple that have me stranded.
**********SOLVED
THe crappy Chinese language Windows tablet worked as the unbrick OP said WIndows would. Must be a kink in the Windows via Mac that could get me into the situation, but not out.
Very relieved... Even though I still am not 100% sure what I actually ended up clicking to get it to register and connect with the unblock tool (which of course was in Chinese) hahaha.
Cheers
CHeers though
Glad you got it sorted out! Cheers
Need Help, please
Just received my OnePlus 8 pro, decided to Root and unlock the bootloader---this went fine.
I then went and upgraded to Android 11 DP3.
I'm now only able to get into Fastboot. at points it will try to boot but only get to the logo screen and then goes black.
When the phone boots up, it goes to Qualcomm CrashDump Mode.
I've been attempting to solve this for half the day with no luck. I've tried Msmtool, but it doesn't recognize the device, even after loading drivers again.
Is there a way to load a ROM from fastboot mode?
Hoping someone can assist, this is super frustrating and I would appreciate any help, please.
Rick
rickhurl said:
Just received my OnePlus 8 pro, decided to Root and unlock the bootloader---this went fine.
I then went and upgraded to Android 11 DP3.
I'm now only able to get into Fastboot. at points it will try to boot but only get to the logo screen and then goes black.
When the phone boots up, it goes to Qualcomm CrashDump Mode.
I've been attempting to solve this for half the day with no luck. I've tried Msmtool, but it doesn't recognize the device, even after loading drivers again.
Is there a way to load a ROM from fastboot mode?
Hoping someone can assist, this is super frustrating and I would appreciate any help, please.
Rick
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-8-pro/how-to/rom-stock-fastboot-roms-oneplus-8-pro-t4083997
cultofluna said:
https://forum.xda-developers.com/oneplus-8-pro/how-to/rom-stock-fastboot-roms-oneplus-8-pro-t4083997
Click to expand...
Click to collapse
Thanks so much. I ended up getting Msmtool to work. Although my device wasn't on (black screen) and it didn't fully show up in the tool, I decided to start the process anyway and it began to load.
I've been on here for over 10 yeas (XDA) I've just lost my account info and made a new one.
Thanks for taking the time to respond. Much appreciated.
Hi,
I'm not sure I'm posting in the right section but, I had a really bad experience upgrading to android 10. Really sluggish and slow... so I tried to downgrade to android 9 by using Lenovo's Rescue and Smart Assistant.
What I did, is to find the stock ROM for my model, and replace the files downloaded by the Rescue Assistant (which downloaded the latest firmware). The process went through, but now the device wont power on.
When I plug in the USB, windows makes a sound, the charging light comes on, but The rescue Assistant nor SP flash tool is able to flash the latest firmware.
Is it bricked for good?
Model : TB-XF606F
Hardware number : 60
Maybe your computer doesn't recognize your tablet. Did you ever try using sp flash tool with your tablet before? You can try reinstall or install a driver for your table if you haven't done it yet.
Well the tablet is recognized as the "mtk vcom..." in device manager. I guess it is the driver that the lenovo rescue app installed.
I have never used sp flash tool with my tablet, just the lenovo rescue.
I tried on 2 different pc and it is the same thing. I think the problem is that I can't turn off the tablet properly, even though, all I can see is a black screen.
I will try to drain the battery by keeping the power button pressed with some scotch tape. I don't know what I can do else.
Edit: I tried a few other times with flash tool using different setting for the connection (with battery and full speed) and nothnig happened. But now windows says it does not recognize my tablet.
did the same thing exactly. . bricked lenovo m10 fhd plus x600v after i flashed a downgrade version. dont try to downgrade this thing. i had already flashed it with 3 or 4 versions the same way , but when i chose to flash the oldest version available with the model , this tab got completly unresponsive , no feedback when try to boot into recovery, fastboot, or system . neither does it gets recognised in windows or anything - device manager dowsnt recognise this usb device ( in device manager properties comments it reads- USB\DEVICE_DESCRIPTOR_FAILURE). if you find a way to reflash the device please let us know. good luck .
Bricked mine after being completely running smoothly on Lineage, then was messing around trying to get gapps installed and jacked up the partitions. TWRP said no OS. Kept messing around and mistakenly locked the bootloader again with apparently an unverified boot partition. . I couldn't get SP Flash tool to work ever either. Pretty sure it's a door stop now.
Hi All
I have a one plus 5 that all of a sudden wont turn on, stuck it on charge last night and then this morning will not boot
I can get it into fast boot mode but that is about as far as it goes, when I try and go to recovery mode the phone just shutsdown
Been searching the forum here and discovered some info about unbricking using MSMdownload tool in EDL mode, I have tried quite a few different drives and about 5 PCS's now all with the same result saying Sahara connection failed
I have also tried the ALL IN ONE TOOL to do the recovery flasher but bootloader is locked and wont allow it, I have not been able to find away to unlock it as everthing I have found says to unlock via the settings menu which obviously I cant get to as the phone wont boot
I was hoping just to extract some data from it at first but that is starting to look like it is not possible
if anyone has any tips that could help me out I would really appreciate it
Cheers
plnewton said:
Hi All
I have a one plus 5 that all of a sudden wont turn on, stuck it on charge last night and then this morning will not boot
I can get it into fast boot mode but that is about as far as it goes, when I try and go to recovery mode the phone just shutsdown
Been searching the forum here and discovered some info about unbricking using MSMdownload tool in EDL mode, I have tried quite a few different drives and about 5 PCS's now all with the same result saying Sahara connection failed
I have also tried the ALL IN ONE TOOL to do the recovery flasher but bootloader is locked and wont allow it, I have not been able to find away to unlock it as everthing I have found says to unlock via the settings menu which obviously I cant get to as the phone wont boot
I was hoping just to extract some data from it at first but that is starting to look like it is not possible
if anyone has any tips that could help me out I would really appreciate it
Cheers
Click to expand...
Click to collapse
@plnewton
Prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved the thread to Android Q&A as it didn't qualify for development.
Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
plnewton said:
Hi All
I have a one plus 5 that all of a sudden wont turn on, stuck it on charge last night and then this morning will not boot
I can get it into fast boot mode but that is about as far as it goes, when I try and go to recovery mode the phone just shutsdown
Been searching the forum here and discovered some info about unbricking using MSMdownload tool in EDL mode, I have tried quite a few different drives and about 5 PCS's now all with the same result saying Sahara connection failed
I have also tried the ALL IN ONE TOOL to do the recovery flasher but bootloader is locked and wont allow it, I have not been able to find away to unlock it as everthing I have found says to unlock via the settings menu which obviously I cant get to as the phone wont boot
I was hoping just to extract some data from it at first but that is starting to look like it is not possible
if anyone has any tips that could help me out I would really appreciate it
Cheers
Click to expand...
Click to collapse
Maybe help
[OP8][OOS 21AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
joke19 said:
Maybe help
[OP8][OOS 21AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Click to expand...
Click to collapse
I have tried following that same procedure and cant get passed the Sahara communication failed error, tried different PC's with different USB ports and cables, also tried different versions of the MSMDownloadTool all with same error
plnewton said:
I have tried following that same procedure and cant get passed the Sahara communication failed error, tried different PC's with different USB ports and cables, also tried different versions of the MSMDownloadTool all with same error
Click to expand...
Click to collapse
Maybe here you find help
OnePlus 5
The OnePlus 5 is one of the most anticipated phones of 2017. The 5.5" AMOLED display has a 1920x1080p resolution. The Snapdragon 835 chipset is paired with options for either 6 or 8GB of RAM. Storage comes in 64 and 128GB options.The main camera on the OP5 has a dual lens setup with 20+16MP...
forum.xda-developers.com