Related
Hello XDA-devs forums,
I'm having an issue since yesterday.
I have rooted my Huawei Ideos X5, and it ran fine for a day or so.
However, when my battery ran out it shut down into a completely blue screen.
When I tried booting it again, this just showed me a blue screen as well.
Now, I fixed this issue by connecting the phone to my PC after booting it with the Vol+ and Vol- pressed.
(So you get the pink/purple screen)
However, when I opened the phone on my PC, all I saw was a "239 MB" "empty" space, and it should have ~2GB..
I placed a backup copy I saved of my "image" folder in that 239 MB storage, and it booted.
However, today I hooked it up to my PC again to see if it magically changed..
And I couldn't access the 239 MB space anymore.
When I tried fixing the issue with a reboot of the phone, that just caused it to get stuck in a booting loop.
So now I'm stuck with a phone that keeps trying to boot itself,
and I can't access it on my windows PC.
I can, however, access 4 different folders of the phone on my linux notebook.
Now, my question is: can someone with a good understanding of problems like these please help me out?
I'm getting kind of fed up with it, as I've only got the phone for 2 days now.
Thank you in advance, and thank you for taking the time to read this.
Have you tried removing the battery for 5 minutes and then putting it back in?
After this, what happens when you press VOL+ and Power?
How about if you press VOL+, VOL- and Power, without the USB cable?
Hello Katu, thank you for posting.
Regarding your questions:
Yes, I have tried to take out the battery for 5+ minutes- it didn't change anything to the situation unfortunately..
If I press VOL+ and Power at the same time, the device boots into recovery mode.
In this I have tried to format the device in order to reset it to factory defaults, but this did not help either.
When I press VOL+, VOL- and Power, the phone boots into the pink/purple screen.
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
PlanDreaM said:
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
Click to expand...
Click to collapse
Well, I used an original ROM:
U8800 V100R001C00B136(Overseas General version)
And that resulted in the boot.img being corrupted, so I can't even overwrite that anymore.
Also, this is what I see when I hit VOL+, VOL- and Power at the same time to boot into safe mode, and connect it to my PC.
img69 [dot] imageshack [dot] us/img69/244/10101191548pm.png
julle131 said:
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
Click to expand...
Click to collapse
I installed the official B136 rom, and after it rebooted, it would just hang on a black screen.
(it used to show the IDEOS or Android logo when it booted)
Hmm mine came with this Rom
U8800 V100R001C00B135SP01 ( general )
Looking at your name you're from the Netherlands ( so am I )
where did you get this 136 version from ?
I would try to put this one on it
You have to put the 'dload' folder into the root of your SD Card,
then boot into boot-loader, after that it'll automatically flash back to the stock Rom.
1 Format SD card
2 On the SD card, create "dload" folder
3 Put the unzipped Rom into "dload" folder
4 Then boot to bootloader (pink screen)
Yes, mine came with that version as well.
However, I couldn't find it anymore and thus downloaded the version I said earlier.
Also, I did everything as you described, except step 4.
You have to boot to recovery instead of bootloader. (VOL+ and Power)
Anyways, I managed to get ClockworkMod's recovery.img on my phone,
and from there on install a custom ROM on the phone, which magically got it working again - even though it didn't work earlier.
Thank you for reading my thread and taking the time to reply to it.
My issue has been resolved.
just for the record, flashing a stock rom is different from flashing a custom rom..
the 4 steps described by Gman2oo6 is the correct way to flash a stock rom (and it is written clearly in the document that is in the stock rom zip file)
[edit]
step (1) is not a necessary step though..
Yeah, I noticed that.
What I did was format my SDcard with FAT32,
and put a custom rom (update.zip) on the SDcard.
I then booted ClockworksMod Recovery and installed the custom rom from the SDcard.
When I tried installing the stock rom, I just followed the PDF file's instructions that came with the stock rom.
hey i udated to GB 2.3.4 (official)and i didnt like the it cuz the wifif ddnt work and the bluetooth also the DATA so itryed to downgrade to 2.2.2 original official and it did the 2/2 steps intalled and when it restarted it did not want to turn on all that happened was it vibrated and thats all so i left it on like that and when the battery died i plugged it in to the AC and the LED turned on red and the touch kkeys also but not the screen so i really NEED help!
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
i tryed it
nope nothin good happened all that happens is a blank screen with nothin on ,LED is off and the touch keys are off. it justz vibrates and when i put the battery it turn the LED on to red and the touch keys turn on but then like 5 min later the LED and keys turn off
astewart said:
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
Click to expand...
Click to collapse
ok heres what i did i wanted to upgrade my phone to the newest version GB 2.3.4.So what i did was download the update and i followed the installation steps i successfully updated to Gb 2.3.4. so like i was checking how it look and the new feature but when i wanted to go on the android market i went to setting and turn on the wifi and it said Error and then i tried the Bluetooth and it said Error also so then i put my SIMs card in and i was like imma use DATA then and when i restarted my phone it had service but no HSPA+ or Edge or GPRS so like i just hatted my phone from their so then i was trying to root it but iddnt know how to do that so like i read this website and i got the UPDATE.APP or 2.2.2 AT&T did the same steps of the installation of BG 2.3.4 and it went to the process and 1/2 stepp good it passed and then 2/2 also passed it installed it and when it said Successively Installed it said Restarting and the scrren turn of and it vibrated and thats all that happened and i left it like that for the whole days and nothing happened
Do u got any idea?
When i connect it to my laptop it says installing drivers .then its says sucesfully installed drivers ready to use. so then i got to Device Manger and i check what has been installed and their it said USB Human interface device and HID-compliant device WHAT DOES THAT MEAN??
Not sure about the HID (human interface device) probably just the way windows sees the device for interfacing with it. With regards to the not booting I have read a lot of people saying that you need to factory reset and clear cache after the upgrade/downgrade. With the phone off, turn it on by long pressing volume+ and power on button till you get the blue recovery screen and from there you can reset factory/ data and also clear the cache. from what I see this should clear up the problem and start up. Please read this thread, it may help you somehow..... http://forum.xda-developers.com/showthread.php?t=1420728
Hope this helps a little
U mean Boot recovery and imma try it and thanks ill check it out
Sent from my MB300 using XDA App
all that i know is that if u customized your partition, it'll bootloop,
so go back to stock-partition ^^
How do I do that got like the steps or video?
Sent from my MB300 using XDA App
when i downgraded to 2.2.2 i installed this V100R001C00B138SP04CUSTC185D002
http://forum.xda-developers.com/showthread.php?t=1251250 got it from that link
Looks like you are not having much luck. Did you try to factory reset?
astewart said:
Looks like you are not having much luck. Did you try to factory reset?
Click to expand...
Click to collapse
well how do i do that do i need to got to the purple/pink screen or bot recovery cuz i cannot access that my phone doesn't do anything pretty much
Hello all, so today I downloaded 4.4.2 KitKat firmware from sammobile site, flashed it without backup or any **** (I've done it before on my tablet and worked like A CHARM) and "finally" got KitKat on my Grand 2 Duos. Then it all started happening after that:
I first started noticing some strange and weird bugs, like I can't lock the screen, notifications never get cleared, it felt like the phone got frozen.
It is known for sure that after I installed the firmware, the recovery mod that I had is gone and replaced with stock one, so I tried flashing a .tar file for rooting my phone (It was actually to use via recovery, not via flash... I lacked information back then), after flashing it, I could boot into recovery mode no more. Even after flashing the 4.4.2 firmware again, I even saw it installing a "recovery.img" file but with no good. When I try to boot into recovery mode it writes at the top "Could not do normal boot" and then "ODIN Mode" and the rest as I used to see before.
Then I started searching the web for solutions relating to the bugs I noticed earlier, found a thread instructing to remove battery, SIM card and microSD card, then re-installing them again except the microSD card... It actually fixed the stated bugs! But I still don't feel relaxed. I want to fix this (idk if this is called "bricked" or no!) issue about recovery mode, and get back to 4.3 as this scared me as f**k.
NOTE: I flashed CWM and TWRP .tar files that I already had, to no avail.
Now does ur mobile boot ? Or is it stuck in the logo ?
Hakuna matata !
Sanjuujosephh said:
Now does ur mobile boot ? Or is it stuck in the logo ?
Hakuna matata !
Click to expand...
Click to collapse
Well I already stated (if you read my whole thread) that it works normally, running 4.4.2 atm without microSD card inserted, it works like the past except for two points:
1- My root access is gone.
2- I can't reboot into recovery mode at all, no matter what I try.
Wow u screwed up ur recovery itself ....wow u r awesome ! Just check if it goes to download mode if it does then flash it again with the latest firmware .... After flashing immediately try going to recovery and if u do ..... do the reset and wipe cache
Hakuna matata !
Sanjuujosephh said:
Wow u screwed up ur recovery itself ....wow u r awesome ! Just check if it goes to download mode if it does then flash it again with the latest firmware .... After flashing immediately try going to recovery and if u do ..... do the reset and wipe cache
Hakuna matata !
Click to expand...
Click to collapse
After I flash the firmware it automatically goes to a recovery screen, a progress bar gets filled then opens the Android system normally. After that when I try to go to recovery mode again it goes back to download mode again with the error text "Could not do normal boot".
Problem.... Fixed? .___.
Well for some reason on the third (and thought it's hopeless) attempt to flash the firmware again, I managed to open recovery mode after it, I was kissing the Reset Factory button.
As long as I find this weird, working on many attemps (maybe Samsung software itself fails?) I find this thread useless, thanks given to Sanjuujosephh! I inserted my microSD and it's working now, rebooted again into recovery and it's working as it should be.
citBabY said:
Hello all, so today I downloaded 4.4.2 KitKat firmware from sammobile site, flashed it without backup or any **** (I've done it before on my tablet and worked like A CHARM) and "finally" got KitKat on my Grand 2 Duos. Then it all started happening after that:
I first started noticing some strange and weird bugs, like I can't lock the screen, notifications never get cleared, it felt like the phone got frozen.
It is known for sure that after I installed the firmware, the recovery mod that I had is gone and replaced with stock one, so I tried flashing a .tar file for rooting my phone (It was actually to use via recovery, not via flash... I lacked information back then), after flashing it, I could boot into recovery mode no more. Even after flashing the 4.4.2 firmware again, I even saw it installing a "recovery.img" file but with no good. When I try to boot into recovery mode it writes at the top "Could not do normal boot" and then "ODIN Mode" and the rest as I used to see before.
Then I started searching the web for solutions relating to the bugs I noticed earlier, found a thread instructing to remove battery, SIM card and microSD card, then re-installing them again except the microSD card... It actually fixed the stated bugs! But I still don't feel relaxed. I want to fix this (idk if this is called "bricked" or no!) issue about recovery mode, and get back to 4.3 as this scared me as f**k.
NOTE: I flashed CWM and TWRP .tar files that I already had, to no avail.
Click to expand...
Click to collapse
Dear friend,
Try my rooting thread at http://forum.xda-developers.com/gal...ps/galaxy-s5-mod-apps-kitkat-grand-2-t2821638
This is made specifically for the KitKat Grand 2.
The message "Could not do normal boot" came as a result of using 4.3 recovery on 4.4.2.
Do not ever attempt to revert to 4.3 as this will HARD BRICK YOUR PHONE'S MOTHERBOARD.
---------- Post added at 06:49 PM ---------- Previous post was at 06:46 PM ----------
citBabY said:
Hello all, so today I downloaded 4.4.2 KitKat firmware from sammobile site, flashed it without backup or any **** (I've done it before on my tablet and worked like A CHARM) and "finally" got KitKat on my Grand 2 Duos. Then it all started happening after that:
I first started noticing some strange and weird bugs, like I can't lock the screen, notifications never get cleared, it felt like the phone got frozen.
It is known for sure that after I installed the firmware, the recovery mod that I had is gone and replaced with stock one, so I tried flashing a .tar file for rooting my phone (It was actually to use via recovery, not via flash... I lacked information back then), after flashing it, I could boot into recovery mode no more. Even after flashing the 4.4.2 firmware again, I even saw it installing a "recovery.img" file but with no good. When I try to boot into recovery mode it writes at the top "Could not do normal boot" and then "ODIN Mode" and the rest as I used to see before.
Then I started searching the web for solutions relating to the bugs I noticed earlier, found a thread instructing to remove battery, SIM card and microSD card, then re-installing them again except the microSD card... It actually fixed the stated bugs! But I still don't feel relaxed. I want to fix this (idk if this is called "bricked" or no!) issue about recovery mode, and get back to 4.3 as this scared me as f**k.
NOTE: I flashed CWM and TWRP .tar files that I already had, to no avail.
Click to expand...
Click to collapse
Dear friend,
Try my rooting thread at http://forum.xda-developers.com/gal...ps/galaxy-s5-mod-apps-kitkat-grand-2-t2821638
This is made specifically for the KitKat Grand 2.
The message "Could not do normal boot" came as a result of using 4.3 recovery on 4.4.2.
Do not ever attempt to revert to 4.3 as this will HARD BRICK YOUR PHONE'S MOTHERBOARD.
اقرأ الموضوع اللي كتبته خصوصي للجراند 2 بنظام كت كات
رسالة Could not do normal boot طلعت بسبب استخدام ريكفري قديم ع الكت كات
الموضوع الجديد فيه ريكفري جديد.
Help me plzz
hey.... wht did u do evn i m stuck there??? plzzz help..got KitKat on my Grand 2 got KitKat on my Grand 2 Duos. Then it all started happening after that:
I first started noticing some strange and weird bugs, like I can't lock the screen, notifications never get cleared, it felt like the phone got frozen.
It is known for sure that after I installed the firmware, the recovery mod that I had is gone and replaced with stock one, so I tried flashing a .tar file for rooting my phone (It was actually to use via recovery, not via flash... I lacked information back then), after flashing it, I could boot into recovery mode no more. Even after flashing the 4.4.2 firmware again, I even saw it installing a "recovery.img" file but with no good. When I try to boot into recovery mode it writes at the top "Could not do normal boot"
citBabY said:
Well I already stated (if you read my whole thread) that it works normally, running 4.4.2 atm without microSD card inserted, it works like the past except for two points:
1- My root access is gone.
2- I can't reboot into recovery mode at all, no matter what I try.
Click to expand...
Click to collapse
i think you should reset your phone
and if it doesn't work then try another country's rom
thankyou
hey bro, I have problem same to u..
Bro...I have same problem..?? I cant go to recovery mode showing Could not boot normally...etc..This happened after I tried CWM using Odin ..I always go download mood and...when i pressed factory reset button ..it didnt rest and go download mode again...plz help me bro...thanks
As long as I find this weird, working on many attemps (maybe Samsung software itself fails?) I find this thread useless, thanks given to Sanjuujosephh! I inserted my microSD and it's working now, rebooted again into recovery and it's working as it should be.[/QUOTE]
Bro, please don't use king root or any other root.
Solution
Please download the stock firmware and then go to download mode flash the stock firmware and root your phone again. Then recovery mode will work.
Thank you
Sorry for errors.
Sent from my SM-G900H using XDA-Developers mobile app
I'm a newbie but I fixed mine...
I've had this happen and it is frustrating to say the least. But I fixed it though. This is what I did: CAVEAT: Please read up all the FAQs, search the right firmware for your phone and the appropriate versions, KitKat vs Jelly Bean, etc. otherwise if your phone is bricked...don't blame me.
I have a 2nd-hand Galaxy Grand 2 and so warranty issues are a non-issue for me. All the files I've found were downloaded on this forum. I flashed ROM with my PC with Odin program installed.
I used Odin3 (v.3.07). (To install Odin program search the this forum). I also reflashed the recovery TWRP file "twrp_ms013g-build2.tar" Including the firmware G7102 Stock. My file was: G7102DDUBOB1_G7102ODDBOB1_G7102DDUBNK1_HOME.tar.md5. (Search for it.) Oh, you may want this file: CF-Auto-Root-ms013g-ms013gxx-smg7102.tar.md5 which may help with rooting your phone if you haven't already done so.
I did the Recovery 3-button Samsung phone groping procedure (you know what I'm talking about Volume Up/Down button + power + home button)... but to no avail...I keep getting that boot loop (Unable to normal boot...etc). You know that stupid "Downloading" Android logo (with the blue worded script on the top left-hand corner) with message ..."Downloading ...Do not unplug source..." Well, I plugged the USB cable to the phone to my computer and Odin program recognized it (it'll read "Added"). The phone didn't give any indications that it was doing anything. Btw, if your Odin program doesn't recognize your device then you should find out why it doesn't. If it recognized it before and you flashed with the Odin program before, I don't see why it won't recognize it now? Some say it's the USB cable but I can't logically accept that kind of superstitious BS. Come on, it's a copper/aluminum wire cable wrapped in pvc -- not a script. A cable is a cable is a cable. If it worked before, it'll work again unless it's cut inside the pvc tubing. You can use a digital multimeter to easily test that for continuity (albeit with really tiny leads to be able to connect to the mini USB side). Anyways, if your Odin program won't recognize your phone, maybe try using a lower version, or re-installing, or another similar type of program that will work. I'm assuming you did install the Samsung USB driver for your PC (e.g. mine is -v1.5.61.0 -search for your appropriate version) so that your computer will recognize your phone when cable is hooked up.
DON'T FORGET TO have the "Auto Reboot" and "F. Reset Time" boxes checked on the Odin program. Then select PAD button and browse for your TWRP file (above) and hit "Start." The Odin will flash it and you'll see a light blue bar under the Android logo (on your phone) that will go from left to right and when finished....whooooohooo the phone auto restarts back to your last OS state without losing any info on the phone. At least it worked for me. Hope that helps. Sorry for the long post.
hi i am in official android 4.3 on my g7102 and i wanna install a recovery file. but every recovery file i tested dosnt work on android 4.3. can you help me?
If u have knox bootloader do not try to downgrade just get kitkat one and in odin check phone bootloader update
Seems like u really guys screwed up the recovery. Somehow on my first try of flashing a zip file (recovery), i got stuck on download mode and wont boot normally. When I fixed the problem, the phone boots normally but the recovery is the only problem I got. I fixed this problem for about 10 days ago, all i did was to reflash the recovery again, orrr flash other version of the recovery (if the downloaded recovery version didnt work) or flash other recovery if the another recovery didnt work. Make sure the recovery is working on the version of you're phone (jelly, kk, lollipop, marshmallow or nougat) and working also on the model version.
I know this is an old thread but I hope this reply helped
hello guys.
first i will start with the beginning. i have a grand 2 duos g7102 phone. i rooted the phone and installed CWM recovery in order to flash custom rom CM 12.1 Lollipop 5.1.1 everything was running well until i upgraded to CM 14 Nougat 7.0 COSMO, i didn't like it and when i wanted to get in recovery mode again it stopped working. Now i can't boot in recovery mode at all. Not showing CWM recovery like before only recovery booting for few second and after that the dead android and No command and there is more writing down the screen like Supported API: 3 but it is hard to read because the screen is always flashing.
i someone faced this problem before please help !!!
thanks in advance
Guys guys i had the same problem with my grand 2 7102.
I rooted my phone and flashed a recovery via odin.
But as i press the button combos it says. Could not do normal boot.
So, i found a solution for it.
Downloaded flashify for play store.
Extracted img. File of twrp recovery provided in the grand 2 thread 😬,
Flashed it with flashify
And guess what i was in the recovery and after that no problem came with the recovery flashing 🙂
If you guys keep having problems with no-pc flashing, try the pc flashing cause this is the better way of flashing other than apps.
I had the could not do normal boot problem
Do this ...
Google cwm test 4.4 ms013g.tar and download it
Put it in PA or PDA uncheck autoreboot keep freset time checked
Flash the file then when you get pass message in odin , remove battery and reinsert it and go to recovery mode directly with vol up + power button.
NOTE : Don't try to normal boot to system
Ok, so my A3000-H (16 gb) has got the boot freeze for some reason after I ran out of battery during playing some game, it never turned on or show the charging battery screen since, I used CWM to flash TWRP (I thought this may work) but all it did that I lost the recovery too, and now choosing the recovery from the fast boot menu only restarts the device.
so all I can access now is the fastboot menu! how can I recover my data on sdcard? i need them badly!
/**************************************************************************/
////// Update: problem fixed!
I used SP flash tool to flash the rom from this post, I made sure to uncheck the last image (the userdata one)
I waited, started the device,
bingo! it passed the lenovo bootlogo I've been prisoned with since 3 weeks ago!
I held out my breath -literally- for data saving part..
it started "upgrading applications" like whats happened when I clean the cache.. it's 190 applications, my number of installed applications not the stock number!
system fully booted...
I fired my ES explorer to check my sdcard...
Voila! I'm saved!
faissl said:
Ok, so my A3000-H (16 gb) has got the boot freeze for some reason after I ran out of battery during playing some game, it never turned on or show the charging battery screen since, I used CWM to flash TWRP (I thought this may work) but all it did that I lost the recovery too, and now choosing the recovery from the fast boot menu only restarts the device.
so all I can access now is the fastboot menu! how can I recover my data on sdcard? i need them badly!
Click to expand...
Click to collapse
You can try flashing CWM again, using flash tool. But I believe you have a big problem there if you want to save your data that is on the internal memory. I had this problem, too. I completely discharged the battery and when I went on to charge it, nothing happened, the screen just stayed black. I could not recover it without completely reinstalling the ROM.
MirXas said:
You can try flashing CWM again, using flash tool. But I believe you have a big problem there if you want to save your data that is on the internal memory. I had this problem, too. I completely discharged the battery and when I went on to charge it, nothing happened, the screen just stayed black. I could not recover it without completely reinstalling the ROM.
Click to expand...
Click to collapse
flashing CWM is no good in my condition, I always recieve a "fastboot partition 'recovery' not support flash)" massage on the device side, and the flash tool says the the partition and recovery are "not the same size" or something similar
will flashing certain img files from the rom (like recovery or boot or something else) can save me? I tried both boot and recovery with no luck..
I just hope the data on the internal storage are not that important.. but unfortunatly it is
..and just today Lenovo mails me about Reachit service!
I can't reach it, Lenovo!
breaking news: I've managed to bring it back online with no data loss!
details in the first post update, if this helped you too click thanks
I have the same problem but don't know what to do
when i open my tab it stops on the splash screen with the Lenovo logo and doesn't complete its booting . I found some solutions that said Hard Reset, but how to get my data before doing this step ??
Hi all!
Here is a little problem that i didn't solved.
i have a N910F Note 4 that likes to boot loop . I received it as it is and don't know what caused it(i suppose that was a rooting issue because had the knox value 1)
During the all time, PC and MAC were unable to recognize the Note 4, despite of repeatedly reinstalled drivers(older and newer versions) , Keys and Smart Switch were unable to recognize the device, PC is failing to install the MTP driver for some reason. I changed the USB ports,restarted,updated drivers,updated windows etc. -NO RESULT. BUT : Somehow Keys is able to run recovery and initialization and install it on the device while saying Connecting device... , phone also doesn't appear in device manager or file explorer as external drive.NOTHING! Odin and Jodin says ''added!'' and starts the job with no comments
1. I tried different versions of boot loaders with different versions of ROM (all for my specific model) with no result.
The end of the boot is when Samsung logo ,sound and graphic appears but freezes before actually starting OS, then restarts. IT keeps restarting until battery goes off(even while connected to pc by usb!!! ). Then starts to charge the battery normally.
It boots in recovery and download mode with no problems, it did every time i flashed it…
2. I tried different versions of boot loaders with stock roms , custom kernels etc...and the problem was the same
3. I tried to flash with Odin the stock 4.4.4 without problems but….the problem was the same
4.I tried Device recovery and initialization with Keys and here something interesting happened:
First time when i did it, it went over the samsung logo and booted. I selected language,i skipped wifi network selection and i accepted the user agreement. No matter how fast i was moving, the boot loop didn't went over the user name selection which is after the user agreement. Then freeze and boot again.
Second time when recovered with Keys (tried more stuff in the mean time) it went over the logo and started to update like…''updating applications 2of 17'' the max reach point was ''3 apps of 17'' and then freeze and reboot
I am out of ideas so i suspect that the battery might be dead because it gets empty even if is charging while phone is ''boot looping''. I ordered a battery,should arrive soon.
If that don't work…i am gonna spend some cash and sent it to Samsung for repairs (i bet that it won't be cheap because they will probably tell me that is the motherboard fried so they make you pay for being a bad boy and tried to root). Far as i know is not a brick as long as download mode and recovery works just fine.
Is here someone that has any new ideas for bringing this phone to life? Any help is well received , maybe i skipped something….
Thank you in advance.
Boot into recovery and perform a factory reset, it will wipe the internal storage.
Battlehero said:
Boot into recovery and perform a factory reset, it will wipe the internal storage.
Click to expand...
Click to collapse
That was the first thing i tried , cache wiped also. After every rom when booting failed.
UPPME said:
That was the first thing i tried , cache wiped also. After every rom when booting failed.
Click to expand...
Click to collapse
Uninstall Kies, and install Samsung USB drivers: https://www.androidfilehost.com/?fid=24052804347849220
Take the battery out, leave it for approximately 10 seconds, enter the battery back in.
Hold volume down key + Home key and power on the device.
Then plug the mobile phone into the computer.
Run Odin as Admin: https://www.androidfilehost.com/?fid=24052804347851815
Then flash the firmware in the AP section.
Make sure that the firmware is for your region, you can download it from Sammobile or SamFirm.
i have the same problem, but mine doesn't let the samsung logo finish when it shows the letter S on samsung logo it goes restart again no sound or anything, recovery is accesible, download mode is also accessible, i can flash official firmware and factory reset but nothing change, still stuck in bootloop no one here in xda knows how to fix it i think.. or they just never encounter something like this
i know how to fix an ordinary bootloops or soft bricked.. but this one is different.. i think there's something with note 4 that causes this..
kerbiii said:
i have the same problem, but mine doesn't let the samsung logo finish when it shows the letter S on samsung logo it goes restart again no sound or anything, recovery is accesible, download mode is also accessible, i can flash official firmware and factory reset but nothing change, still stuck in bootloop no one here in xda knows how to fix it i think.. or they just never encounter something like this
i know how to fix an ordinary bootloops or soft bricked.. but this one is different.. i think there's something with note 4 that causes this..
Click to expand...
Click to collapse
Yes, it doesn't go after the Samsung graphics , mine does sound. Goes to app updates only after Kies recovery but doesn't go more far than updating apps 3/17 for ex…crushes there and starts over….weird.
One time i managed to actually go to setup menu, choose country,wifi, device name, and there crushed and started over…. So i am thinking now that the battery might be wasted because i saw posts saying that after the 5.0.1 update many Note 4's went to boot loop and the battery change solved the problem. Now i have new battery coming by post.
Hi I had a similar problem but I do not know if that works but always worth a try
1. download recovery - "twrp-2.8.1.0-trltexx"(.tar) cant post link fresh in forum
2. flash recovery through Odin (AP) ( run as administrator)
3. unplug the cable
4. Reboot to Recovery (home+power+wolume up)
5. Then go to Wipe/Advanced Wipe/check the boxes - Dalvik Cache,System,Data,Cache and Swipe to Wipe
6. Reboot to Download Mode
7. Open Odin ( run as administrator) choise the rom to flash
8 Connect the phone
7. Flash Your Stock Rom
8. Reboot
always in Odin load the file first to flash and then connect the phone
sorry for my English
UPPME said:
Yes, it doesn't go after the Samsung graphics , mine does sound. Goes to app updates only after Kies recovery but doesn't go more far than updating apps 3/17 for ex…crushes there and starts over….weird.
One time i managed to actually go to setup menu, choose country,wifi, device name, and there crushed and started over…. So i am thinking now that the battery might be wasted because i saw posts saying that after the 5.0.1 update many Note 4's went to boot loop and the battery change solved the problem. Now i have new battery coming by post.
Click to expand...
Click to collapse
if you can stay in recovery mode and download mode for more than 10mins i think its not battery problem, i think i have corrupted system files, i left my note 4 to samsung service center a while ago i will get it tom, i just hope they wont charge me too much for it,
uldyzjan said:
Hi I had a similar problem but I do not know if that works but always worth a try
1. download recovery - "twrp-2.8.1.0-trltexx"(.tar) cant post link fresh in forum
2. flash recovery through Odin (AP) ( run as administrator)
3. unplug the cable
4. Reboot to Recovery (home+power+wolume up)
5. Then go to Wipe/Advanced Wipe/check the boxes - Dalvik Cache,System,Data,Cache and Swipe to Wipe
6. Reboot to Download Mode
7. Open Odin ( run as administrator) choise the rom to flash
8 Connect the phone
7. Flash Your Stock Rom
8. Reboot
always in Odin load the file first to flash and then connect the phone
sorry for my English
Click to expand...
Click to collapse
nah it doesnt work thats the first thing I do, that only work on ordinary bootloop
I was stuck in a boot loop the other day trying to flash a stock ROM to get rid of encryption. I tried all the stuff mentioned in this thread which is just standard procedure but I couldn't get past the samsung logo. What it turned out to be was that you need to go to stock recovery after flashing the stock ROM via odin and do a factory data reset then it will boot to the OS. It worked in my case, maybe you can give it a try.
guts100 said:
I was stuck in a boot loop the other day trying to flash a stock ROM to get rid of encryption. I tried all the stuff mentioned in this thread which is just standard procedure but I couldn't get past the samsung logo. What it turned out to be was that you need to go to stock recovery after flashing the stock ROM via odin and do a factory data reset then it will boot to the OS. It worked in my case, maybe you can give it a try.
Click to expand...
Click to collapse
if you read the above post you will know that we already wipe and factory reset,
btw since i was not able to fix it, it brought it to samsung service center and they also cant fix it so they are changing the motherboard, so far they are not charging me anything and just asking to bring my receipt of purchase so it will be under warranty
kerbiii said:
if you read the above post you will know that we already wipe and factory reset,
btw since i was not able to fix it, it brought it to samsung service center and they also cant fix it so they are changing the motherboard, so far they are not charging me anything and just asking to bring my receipt of purchase so it will be under warranty
Click to expand...
Click to collapse
I read the post; however, it did not appear as though you did a factory reset after flashing the stock ROM only before. At any rate at least you're getting a new mobo out of it and problem solved.
guts100 said:
I was stuck in a boot loop the other day trying to flash a stock ROM to get rid of encryption. I tried all the stuff mentioned in this thread which is just standard procedure but I couldn't get past the samsung logo. What it turned out to be was that you need to go to stock recovery after flashing the stock ROM via odin and do a factory data reset then it will boot to the OS. It worked in my case, maybe you can give it a try.
Click to expand...
Click to collapse
guts100 said:
I read the post; however, it did not appear as though you did a factory reset after flashing the stock ROM only before. At any rate at least you're getting a new mobo out of it and problem solved.
Click to expand...
Click to collapse
yes thats the good thing and its under warranty even though im already rooted, with knox 01 and custom binary haha, i was already expecting to pay a huge amount of money but they said they will cover it, so its a blessing, but i hope the OP fixed his problem.
Hello Fellows,
First I'd like to explain my situation in details.
my phone fell while i was walking on the street and it got some dirt on it, so ( foolishly ) I decided to clean it.... and yeah... i washed my phone like washing a dish... i like rinsed the phone in water and in other cleaning liquids for no more than 3 seconds it was all quick thingy... anyway after washing it.... i directly powered it ON and it powered but the screen was OFF ( so i decided to power it OFF, solder it and to remove any clues of water inside on the board or something... after that i used a hairdryer ( which is not recommended ) but i used it at a descent distance so that no harm would be caused to the board... as i was only subjecting air to let water if any existed to dry..
i put the phone in rise and kept it for 1 day... after 1 day i wanted to check out how stuff went.. so i powered it ON and the screen actually turned ON and the vibrator, even the hardware back-light lighted up perfectly but here's the problem I'm facing.
the phone only boots into TWRP 3.1.0.0 no matter what i do.. things i tried:
1- flashed some ROM, through TWRP
2- used "Fixed Contexts" in TWRP
3- Repair File System "System partition" through TWRP
4- used file manager inside TWRP and checked if the internal storage is working and indeed i can show all my files, through TWRP
5- also used the file manager to access "System" Partition and everything was there, through TWRP
6- change File System into EXT4 "System partition" through TWRP
7- Resize File System "System partition" through TWRP
8- Wiping all Partitions "Excluding the internal storage"
and NON WORKED..
note that whenever i attempt to flash a ROM the result shows successful with no errors ..
so whats the problem in here?
i have a guess but i need help in order to apply it.. i think the VOL- is pressed and stuck somehow Electrically on the board ( but no physically as i can press the volume down and hear its tap or whatever you call it.. i even managed to boot into fast-boot and it worked.
is there anyway i can disable the vol- button temporary to see if its causing the problem?
the only thing is i cant see my ROM booting... not even the boot animation showing... just the boot-loader and automatically it goes into the recovery
also i have kernel log attached below followed by the recovery log
EDIT: i also forgot to mention that my PC recognize the phone and i have access to my internal storage.. no problems with transfer speed as well
after tons of attempts and searching online and flashing stuff and blablabla... (i flashed every recovery image op2 support )
FINALLY
I found the solution my self, and everything is back to normal...
the phone was stuck at the early stage of the booting process and maybe couldn't find the boot image in order to boot up the android OS, so all i did was i plugged in the phone into the PC, i started everything in fastboot mode on phone and on PC then i just sent the following command to my phone.
Code:
fastboot continue
fastboot then(meaning after the command) wasnt able to recognize the phone anymore so i knew that its now trying to search for partitions other than recovery.. i waited like 10 seconds and booom it booted into the best ROM i've ever used ( and actually missed ) which is Official RR from our great maintainer "nicesoni_ash"
P.S: the vol- as i said was really stuck and i noticed it not working while on RR ROM, so i just clicked it many times and tried mixing vol+ with vol- .. after many many attempts vol- worked and i then rebooted to make sure if everything is back to normal and no recovery auto boots and indeed it smoothly booted up :laugh:
thanks a lot for all who tried to help out in here or on oneplus forums :highfive:
#back_to_resurrect_and_will_always_remix
Did you try reverting to stock ?
Try getting files from here..
https://forum.xda-developers.com/oneplus-2/general/rom-mirrors-official-oxygen-os-roms-ota-t3209863
I would consider it as bricked, after all attempts failed and go with the unbrick guide here on xda or oneplus forums, maybe this way it can be ressurected.
You probably have already backed up your data..
Damn, that hurts..
mithu.creative said:
Did you try reverting to stock ?
Try getting files from here..
https://forum.xda-developers.com/oneplus-2/general/rom-mirrors-official-oxygen-os-roms-ota-t3209863
Click to expand...
Click to collapse
sorry for this late reply but yes i have tried flashing every ROM from stock to Custom ones even i flashed EVERY SINGLE RECOVERY IMAGE OUR PHONE SUPPORTS XD and non worked... first aid.. qualcomm toolkit... non...
hello bro, i updated a magisk module v4android and when i reboot, it boots up in twrp. and since then it keeps booting into twrp. So, i used fastboot continue and when it boot int the home i deleted that module.
but fastboot continue only works once. After that if i switch-off and switch-on the phone, it goes into twrp. it needs fastboot continue everytime.
please provide me a permanent solution. few other users are facing this too. plz reply i'm waiting.
Hey,
with the help of some others in a Discord server (thanks @thesanjayp#6251 on discord) i managed to find the issue. Appearantly there was a change in /dev/block/bootdevice/by-name/misc for some reason. There was a similar problem on the old LG Optimus G Pro which i owned, so i remembered this.
As I'm not sure if we can just wipe the partition or not, i got a working misc.img attached.
In any terminal (adb shell, twrp terminal or an terminal app in a rom) make sure you have su rights, and then execute the following command:
Code:
dd if=/path/to/misc.img of=/dev/block/bootdevice/by-name/misc
Make sure to adapt the path to the misc.img though to the location you saved it to.
The misc.img I used is attached to this post.
PS: Im not responsible for any broken phones if this didnt work for you.