Related
OnePlus Team has finally rolled out long-awaited Marshmallow Update. This time, it isn't community build or beta, it is a STABLE update!
This post will guide you to upgrade from 2.2.2 to 3.1.2 for both non-rooted and rooted users.
Disclaimer:
Code:
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
For non-rooted, unmodified system users (who haven't tinkered anything with the device's software):
1a. You must have received a notification to update to OOS 2.2.3
Download it, and hit reboot now! This will automatically install the update which will prepare your device to install MM update.
1b. If you haven't received the update notification for 2.2.3 then download it manually from here - https://goo.gl/NkZm2I
Place it in the root directory of Internal Storage (not inside any folder, just directly on Internal storage) and then enter recovery mode by turning off your phone and then pressing Power button + volume down button at the same time. Once you get into recovery, select Install from Internal Storage and the select your file and flash it!
Congratulations, now you are on OOS 2.2.3!
Download MM OOS 3.1.2 from here - http://s3.amazonaws.com/oxygenos.on...OTA_017_all_201609231354_e675a52db5a044e7.zip
and place it on your SD card again, like above, go to recovery and flash the file!
You are now on Official Oxygen OS 3.1.2 MM Update!
For rooted users, who have modified system:
1. Download the zip http://s3.amazonaws.com/oxygenos.on...OTA_017_all_201609231354_e675a52db5a044e7.zip and place it on your SD Card or Internal Storage
2. Go to your recovery (TWRP is preferred)
3. Wipe System, Data, Cache, and Dalvik Cache
4. Select Install and navigate to your file location, select your file and flash it!
5. Flash https://drive.google.com/file/d/0B4K5cvm1zdldcmZpc3RuVnRjUUE/view to get root access!
6. Reboot! Enjoy your MM Update!
(Optional) These are steps I followed for a safer install:
1. Took the whole backup of 2.2.2 from official TWRP
2. Flashed Whole 2.2.2 zip from here - http://downloads.oneplus.net/oneplus-x/oneplus_x_oxygenos_2.2.2/ which I had already downloaded
3. Flashed Stock Lollipop recovery
4. Unrooted my phone
5. Locked and unlocked my bootloader (don't know why I was getting locked bootloader error while flashing blu-spark twrp so did it)
6. Unrooted my phone
7. Flashed 3.1.2 zip from stock lollipop recovery
8. Flashed blu-spark TWRP using fastboot
9. Flashed modified SuperSU
10. Restored just data partition from my 2.2.2 backup and wiped cached.
This way is long and tedious but ensures you get the data, which was important for me.
Edit: Above process can be applied to install Oxygen OS 3.1.3 (link below) Directly! Hope you have a pleasant experience on Marshmallow, cause I'm definitely loving it
Feel free to ask any queries!
Useful Links: -
1. Stock Lollipop Recovery - https://s3.amazonaws.com/oxygenos.oneplus.net/OPX_recovery.img
2. Official TWRP Recovery - https://dl.twrp.me/onyx/
3. Blu Spark Recovery - http://forum.xda-developers.com/devdb/project/dl/?id=20236
4. SuperSU for OOS 3.x.x - https://drive.google.com/file/d/0B4K5cvm1zdldcmZpc3RuVnRjUUE/view
5. Unbrick Guide - http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
6. Official Oxygen OS 3.1.2 link - http://s3.amazonaws.com/oxygenos.on...OTA_017_all_201609231354_e675a52db5a044e7.zip
7. SD Card Writable fix in MM - http://forum.xda-developers.com/android/software/fix-extsd-fix-v1-0b-2016-01-18-t3296266
6. Official Oxygen OS 3.1.3 link - http://downloads.oneplus.net/oneplus-x/oneplus_x_oxygenos_3.1.3/
Credits: Joshwin Aranha, OnePlus Team, Google and everyone who I forgot to mention
Hit Thanks if this post helped you!
The 3.1.2 official update isn't in oneplus download center. And it seams that there is no mention in oneplus forums.
Is your info legit?
Sent from my ONE E1001
OP didn't announced officially about oxygen os 3.1.2 but sone OPX users have installed it
Strange......
This rom file can be installed as stand alone? Im currently on community 3.1.1.
Sent from my ONE E1001
sniper20 said:
Strange......
This rom file can be installed as stand alone? Im currently on community 3.1.1.
Sent from my ONE E1001
Click to expand...
Click to collapse
It can be flashed directly using TWRP (use Latest TWRP by blu spark)
sniper20 said:
The 3.1.2 official update isn't in oneplus download center. And it seams that there is no mention in oneplus forums.
Is your info legit?
Sent from my ONE E1001
Click to expand...
Click to collapse
It was announced but then again removed. I personally saw and downloaded it from there.
Mystery solved.... Hehe. I ll install it via official recovery.
Sent from my ONE E1001
sniper20 said:
Mystery solved.... Hehe. I ll install it via official recovery.
Sent from my ONE E1001
Click to expand...
Click to collapse
Let me know how that works out for you!
I'm using Sultan's CM 13. Can i flash Oxygen via Blu_spark TWRP after factory reset ?
aadnanrulz said:
I'm using Sultan's CM 13. Can i flash Oxygen via Blu_spark TWRP after factory reset ?
Click to expand...
Click to collapse
You will have to wipe system, data and both cache and then flash the zip!
Sachin7843 said:
Let me know how that works out for you!
Click to expand...
Click to collapse
I ll post today late at night.....
Sent from my ONE E1001
Thanks mate !
Do we need to upgrade to 2.2.3 first or upgrade from 2.2.2 is also fine ?
Szaby59 said:
Do we need to upgrade to 2.2.3 first or upgrade from 2.2.2 is also fine ?
Click to expand...
Click to collapse
I didn't have right resources with me for now so I just flashed 2.2.2 zip (had downloaded the whole zip from downloads.oneplus.net), unrooted and flashed stock recovery (check the main post for links) and directly flashed 3.1.2 zip! Worked flawlessly!
Sachin7843 said:
I didn't have right resources with me for now so I just flashed 2.2.2 zip (had downloaded the whole zip from downloads.oneplus.net), unrooted and flashed stock recovery (check the main post for links) and directly flashed 3.1.2 zip! Worked flawlessly!
Click to expand...
Click to collapse
i have two questions here
1. were you able to format external SD card as internal?
2.how to flash modified/original TWRP after install OOS 3.1.2?
I flashed and rooted it properly but xposed isn't active. What version do I have to flash?
Which custom recovery is supported for this ROM ? I couldn't install the package using official twrp recovery. Had to switch to official recovery to install the ROM
Darkside1984 said:
I flashed and rooted it properly but xposed isn't active. What version do I have to flash?
Click to expand...
Click to collapse
Ok, I answer myself: xposed sdk23 arv version. Everything works fine (I've installed all zips by custom recovery).
working on twrp
just dirty flashed over oos 3.1.1 with bluspark latest recovery & working well
nitheshg said:
i have two questions here
1. were you able to format external SD card as internal?
2.how to flash modified/original TWRP after install OOS 3.1.2?
Click to expand...
Click to collapse
I couldn't understand your question 1... for your second question - I flashed 3.1.2, unlocked bootloader, flashed Blu-spark's TWRP, flashed Modified Super SU and then restored just Data from my 2.2.2 backup!
HI ALL! With new Rom
VertexOS aims to provide a simple but enhanced near-stock AOSP experience with carefully selected features and an emphasis on stability and smoothness.
what doesn't work ?
everything is working perfectly.
Coming from another ROM, OR if a CLEAN FLASH is required
1) Download the Vertex... .zip file.
2) Download a 7.1 GApps package.
3) Boot into recovery (TWRP)
4) Full wipe (Dalvik Cache, Cache, System, Factory Data Reset)
5) Flash the Vertex... .zip file
6) Flash Nougat-compatible GApps : http://opengapps.org/ / ARM64,7.1,pico
7) Reboot
Download:https://www.androidfilehost.com/?fid=745425885120707303
enjoy!
Credits:
- LineageOS
- AOSPA
- Citrus-CAF
- DU
- PureNexus
- Zephyr-OS
IF YOU LIKE MY WORK PLEASE HIT THANKS .
-IMPORTANT- : To install this rom you must have installed TWRP-3.0.3.0 , download from here https://www.androidfilehost.com/?fid=529152257862697990
To easy install from TWRP recovery :
1- open "install" section.
2- SELECT "install img" in the bottom .
4- Chose the place of TWRP-3.0.3.0.
5- install as RECOVERY , then reboot to recovery.
XDA:DevDB Information
ROM [AOSP + LOS], ROM for the Wileyfox Storm
Contributors
PS-DEV
Source Code: https://github.com/VertexOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: AOSP + LOS
Version Information
Status: Stable
Created 2017-02-11
Last Updated 2017-02-20
Received
Received !
Firstly, thanks loads for producing these ROMs it is much appreciated. :good:
I am unfortunately having issues getting both this and your CypherOS rom to work.
After full wipes of everything both roms get stuck on the "Wileyfox powered by Android" boot screen.
I get the same result sideloading via adb and from the internal memory.
I have tried TWRP 3.0.2.0 and older versions, I have also tried old and new Cyanogen recoveries.
I have successfully got the Slimrom 7.1 rom working and the LineageOS 14.1 rom which also works but with many random reboots.
Any thoughts on what I might be missing when flashing your ROMs?
Again many thanks for the work.
Any chance of grabbing your recipe for building this from source? Own personal use only. I have the VertexOS repo cloned. A copy of your roomservice and local manifest would help enormously.
This seems much more stable than Lineage at the moment. Please note you *MUST* use TWRP 3.0.2-1, the non-test version, to install Vertex and a fastboot -w also can't hurt.
Cannot inatall gapps (Wrong Architecture)
Hi,
I installed VortexOS 1.9... but when I tried to install ARM64 7.1 pico Open gapps package then following Error occurs:
"ERROR 64: Wrong architecture to set-up Open GApps pre-bundled busybox"
I use TWRT 3.0.3-0 (kipper)
Any ideas what I made wrong?
best regards, Chuck
Vertex appears to be built as ARMv7, which means 32 bit. Try the 32 bit pico.
I installed fine with the nano apps and 64 bit, no issues
miSAKe said:
Firstly, thanks loads for producing these ROMs it is much appreciated. :good:
I am unfortunately having issues getting both this and your CypherOS rom to work.
After full wipes of everything both roms get stuck on the "Wileyfox powered by Android" boot screen.
I get the same result sideloading via adb and from the internal memory.
I have tried TWRP 3.0.2.0 and older versions, I have also tried old and new Cyanogen recoveries.
I have successfully got the Slimrom 7.1 rom working and the LineageOS 14.1 rom which also works but with many random reboots.
Any thoughts on what I might be missing when flashing your ROMs?
Again many thanks for the work.
Click to expand...
Click to collapse
Check the first post . i have been edit.
Chron0s said:
Any chance of grabbing your recipe for building this from source? Own personal use only. I have the VertexOS repo cloned. A copy of your roomservice and local manifest would help enormously.
This seems much more stable than Lineage at the moment. Please note you *MUST* use TWRP 3.0.2-1, the non-test version, to install Vertex and a fastboot -w also can't hurt.
Click to expand...
Click to collapse
show your PM.
Chron0s said:
Vertex appears to be built as ARMv7, which means 32 bit. Try the 32 bit pico.
Click to expand...
Click to collapse
NO NO
ARM64 ARMv8 .
ChuckeCheese said:
Hi,
I installed VortexOS 1.9... but when I tried to install ARM64 7.1 pico Open gapps package then following Error occurs:
"ERROR 64: Wrong architecture to set-up Open GApps pre-bundled busybox"
I use TWRT 3.0.3-0 (kipper)
Any ideas what I made wrong?
best regards, Chuck
Click to expand...
Click to collapse
1- check to wipe this partitions :
- SYSTEM
- CACHE
- Dalvick-cache.
- DATA
and dont forget to factory reset .
2- first install rom then Gapps. download from here http://bit.ly/2kQf3Le
PS-DEV said:
Check the first post . i have been edit.
Click to expand...
Click to collapse
Thanks again,
Unfortunately I could not get that recovery to work via TWRP 3.0.2.1 or fastboot.
I can flash it but not boot to recovery.
If booting the image directly I get
Code:
FAILED (remote: dtb not found)
I will try building it myself when I get some time.
miSAKe said:
Thanks again,
Unfortunately I could not get that recovery to work via TWRP 3.0.2.1 or fastboot.
I can flash it but not boot to recovery.
If booting the image directly I get
Code:
FAILED (remote: dtb not found)
I will try building it myself when I get some time.
Click to expand...
Click to collapse
You flash via TWRP or fastboot ??
And looking for the method to install TWRP 3.0.3.0 ?
And after chose recovery , you install in "boot" or "reocvery" section ?
PS-DEV said:
You flash via TWRP or fastboot ??
And looking for the method to install TWRP 3.0.3.0 ?
And after chose recovery , you install in "boot" or "reocvery" section ?
Click to expand...
Click to collapse
Both, from TWRP i selected recovery, this flashes but results in recovery not loading.
from fastboot the flash fails, as does booting the image via fastboot.
miSAKe said:
Both, from TWRP i selected recovery, this flashes but results in recovery not loading.
from fastboot the flash fails, as does booting the image via fastboot.
Click to expand...
Click to collapse
The phone boot to rom or not ??
PS-DEV said:
The phone boot to rom or not ??
Click to expand...
Click to collapse
Yes can still boot to Slimrom 7.1 with or without working recovery.
I have reverted to TWRP 3.0.2.1 though.
Thanks for your help.
miSAKe said:
Yes can still boot to Slimrom 7.1 with or without working recovery.
I have reverted to TWRP 3.0.2.1 though.
Thanks for your help.
Click to expand...
Click to collapse
Can you check your bootloader version ?
Because TWRP 3.0.3.0 Needs to kipper-13-.... bootloader
See the photo .
PS-DEV said:
Can you check your bootloader version ?
Because TWRP 3.0.3.0 Needs to kipper-13-.... bootloader
See the photo .
Click to expand...
Click to collapse
Got it kipper-12.1
I reverted to stock recently.
Solved the issue, thank you very much.
miSAKe said:
Got it kipper-12.1
I reverted to stock recently.
Solved the issue, thank you very much.
Click to expand...
Click to collapse
Stock firmware or what? ,, to install version 13 Bootloader , just install any nightly cm13 then back to recovery and install TWRP 3.0.3.0 ??.
I got a brand new Samsung Tab E 9.6" (SM-T560). Shame on me, I didn't notice before it comes with Android 4.4.4
As many apps require newer OS, I'm wondering if I can upgrade it to Android 6.0.
Plase note:
1. I'm not an expert, so please explain me as easy as possible how to do it, if it can be done;
2. please tell me, in case,if it's 100% legal and/or if it can void warrant.
Thank you.
Samsung Tab E
Check again --- Just picked up the same thing this week at Walmart for $129.00 + $25 Google Play credits - it came with 7.1.1. - Take it back sounds like you got some real old stock..
They do come with Android 4.4, however if you go to Samsungs web page you can find a crispy 7.1.1 image you can flash with Odin. Then if you wish you can unlock bootloader and flash a custom recovery like CWM or TWRP and then chainfires systemless root. Cheers! Upgrading to just 7.1.1 with Odin will not void your warranty, anything else that involves unlocking the bootloader will and is will trip samsungs knox security feature. If warranty is important only flash the 7.1.1 image using Odin.
Hello,
I'm searching forsuch an update, too. But It seems, that it was only released for USA and CA. But I'm from Germany. @xSLAYERx do you have a link to the ROM?
xSLAYERx said:
They do come with Android 4.4, however if you go to Samsungs web page you can find a crispy 7.1.1 image you can flash with Odin. Then if you wish you can unlock bootloader and flash a custom recovery like CWM or TWRP and then chainfires systemless root. Cheers! Upgrading to just 7.1.1 with Odin will not void your warranty, anything else that involves unlocking the bootloader will and is will trip samsungs knox security feature. If warranty is important only flash the 7.1.1 image using Odin.
Click to expand...
Click to collapse
heya, could you please share a link of this 7.1.1 with me? or the image itself, I can't find it anywhere and I'm stuck with 4.4.4
thank you!
hurkagyurka123 said:
heya, could you please share a link of this 7.1.1 with me? or the image itself, I can't find it anywhere and I'm stuck with 4.4.4
thank you!
Click to expand...
Click to collapse
Hi, I was with the same problem, and I posted here in XDA, I'm from Brazil, i have the model SM-T560, and now i'm using nougt, from Lineageos 14.1, and this was only possible, because someone from Xda, gave me the following link:
http://www.gearappsnap.com/2018/03/14/how-to-install-android-nougat-on-the-galaxy-tab-e-sm-t561/
The rom is of the SM-T561 model, but also works on the SM-T560, read everything before doing anything. When installing TWRP, you can install the version of the SM-t560, which will not make any difference.
One more thing, I advise you to see some YouTube tutorials how to install TWRP. Just in case.
Thank You for your help!
hurkagyurka123 said:
Thank You for your help!
Click to expand...
Click to collapse
For nothing, follow step by step that will work perfectly. Except this will end your warranty, but it's the only way to install an update. If you need any help, just talk.
gearappsnap site is not really good made.. The download links behind text which look like a normal one and also that it says, flash boot.img only when the memory is wrong..
Well, CM14.1 did not work for me.. I had to flash boot.img before EVERYTHING else, then rebooted again to TWRP and THEN install cm14.1.
Um, did you follow step by step?
I followed what was written, and for me it worked normal, The boot.img file is to fit just the memory of the table because it had some problem with the rom, without installing it, has tablet that got locked in infinite loop. And the links were working normal for me.
Links that i download:
ROM: https://drive.google.com/file/d/1D0wrGM4XyZMo-t3ll4trvJ93Pl1KEZ1V/view
Boot.img: https://drive.google.com/file/d/1bqGmu4NTlEeKdsFPGjIY9lnPqujjazr4/view
softkeys: https://drive.google.com/file/d/1ddSB28g1xTd0J7sl8V6QmlPZA1aX77ot/view
Gaps: https://opengapps.org/
First the TWRP is installed, with the battery above 70%, then restarts the tablet.
Within the TWRP:
1) Wibe-> advanced wibe-> selects almost anything but not microSD and OTC. and Wibe.
2) Back to the home page-> Install-> select the external storage (the files must be saved on the SD card).
3) The first file to be installed is the rom.
4) Once installed, go back to the files and at the bottom of the page you will click install image and install boot.img.
5) After Boot.img is installed, switch back to Install Zip, and Install the Softkeys.
6) After installing the softkeys go back and install the Gaps. (I used the ARM-7.1-Pico) and restart the tablet.
In my case I did not install superSU. That's what I did. This rom has some flaws but better than Kitkat, that's what I think.
thE_29 said:
gearappsnap site is not really good made.. The download links behind text which look like a normal one and also that it says, flash boot.img only when the memory is wrong..
Well, CM14.1 did not work for me.. I had to flash boot.img before EVERYTHING else, then rebooted again to TWRP and THEN install cm14.1.
Click to expand...
Click to collapse
HEY!
download this: https://mega.nz/#!yEpjCITA!9EA101hYDOajDwmBHKxSZhv3QkV-RI61MkLn0JYNRZY
unzip and install and follow steps.
1-install TWRP 3.0.2-1 via odin
2- copy ALL files of .zip in one folder in storage (mem stick)
3- power off and then power on IN TWRP (vol + + home + power button)
4- make full wipes except externar storage
5- install zip (first choice lineage -14, then choice open gapps, next choice key.zip)
6- install img (choice boot.img)
7- WIPE (Dalvik, cache)
enjoy android 7.1 in your tab e T560
63or63 said:
HEY!
download this: https://mega.nz/#!yEpjCITA!9EA101hYDOajDwmBHKxSZhv3QkV-RI61MkLn0JYNRZY
unzip and install and follow steps.
1-install TWRP 3.0.2-1 via odin
2- copy ALL files of .zip in one folder in storage (mem stick)
3- power off and then power on IN TWRP (vol + + home + power button)
4- make full wipes except externar storage
5- install zip (first choice lineage -14, then choice open gapps, next choice key.zip)
6- install img (choice boot.img)
7- WIPE (Dalvik, cache)
enjoy android 7.1 in your tab e T560
Click to expand...
Click to collapse
In reality you have to install boot.img and softkeys before, the reason is because they are modified for the T56X, otherwise install themselves after the gaps will give error when to use. At least it is what was written on the site, and so far I have been using no defect at all.
marcelo010 said:
In reality you have to install boot.img and softkeys before, the reason is because they are modified for the T56X, otherwise install themselves after the gaps will give error when to use. At least it is what was written on the site, and so far I have been using no defect at all.
Click to expand...
Click to collapse
I do not think that is effective. if you come from 4.4.4 and install it before the lineage ROM (BASE 7.1 for example) it will be erased again because with the new base everything is overwritten.
63or63 said:
I do not think that is effective. if you come from 4.4.4 and install it before the lineage ROM (BASE 7.1 for example) it will be erased again because with the new base everything is overwritten.
Click to expand...
Click to collapse
Well that didnt work for me.. Was coming from Stock 4.4 ROM. Flashed the CM14.1 AND softkeys, but NOT the boot.img, because you cannot flash zip and img files at the same time. Then I booted it and it crashed 10-60secs after it booted. Sometimes it had a boot loop.
Then I tried CM 13 which worked fine and in a german board, someone wrote (based on the gearappsnap site) that the boot.img has to be the first thing to flash and even reboot into twrp again and then flash CM14.1 + softkeys + gapps.
If you could install it, that's what matters, in my case it worked the way it was on the site, there are some bug's, but it's a lot better than the stock rom, and I was already using a custom rom on the T560 before installing this LineageOS 14.1,and it was this link:
https://forum.xda-developers.com/galaxy-tab-e/development/rom-lightning-t3716039
Szia!
did the upgrade work for You For galaxy tab e?
Done this and it worked but.........
The tablet is really slow, not netflix compatible with this version, and so on....
I think I just might downgrade again
After I have tried step 3, it didnt open in twrp mode. My tab stucks in black screen with "Samsung galaxt tab e " text in background.Please let me know how to proceed.
[QUOTE = "63or63, Post: 78613279, Mitglied: 4438103"]
HI THERE!
Download this: https://mega.nz/#!yEpjCITA!9EA101hYDOajDwmBHKxSZhv3QkV-RI61MkLn0JYNRZY
unzip and install and follow the steps.
1-install TWRP 3.0.2-1 through odin
2- Copy ALL .zip files to a folder in memory (mem stick).
3- turn off and then turn on IN TWRP (vol + + home + power button)
4- Make full towels except for external storage
5- install zip (first choice line -14, then select open gaps, next choice key.zip)
6- install img (choose boot.img)
7- WIPE (Dalvik, Cache)
enjoy Android 7.1 in your Tab e T560
[/ZITAT]
1000 tanks BR
.
1000 x danke es hat funktioniert
Translation: 1000 x thank you it worked
Hello friends
After reading many comments and reading many tutorials k3 note users face Oreo ROM do not boot and shows no os is installed or it gives bootloop.
If you are facing these problems then this tutorial help you to boot into Oreo rom successfully.
I know that there is no stable Oreo rom but people try to flash Oreo rom because it is new and having new features .
Firstly use ressurection remix Oreo rom because it is more stable then linage os also it hase endless customisation.
Always use latest twrp for flashing roms ( all links are given at bottom).
So,let's go
1.Firstly boot to your current installed twrp and flash the given twrp.
2.Boot to new recovery and wipe except internal storage I prefer clean install because it does not give any errors.
3.Flash the RR Oreo rom if it shows error again wipe and boot into recovery it does not show any error wait for the installation.
4.Flash latest Gapps nano&picco(arm64) I prefer nano
5.This part is important flash magisk or super su as your wish for root permission.
6.This is the most important part don't boot because we need to path the boot.flash the boot image when you flash the image it shows many options like nvram,recovery etc. choose boot and flash the image .
7.Now boot to system you don't see any error like is is not installed or bootloop.
NOTE:- the boot image I only tried in ressurection remix so try in another roms I don't now it will work or not.
I did not take any responsibility if your phones completely dead,blast or anything.
Please take full nandriod backup into twrp of anything goes wrong.
Download links
This is my second post so I can't add links.so comment in comment section I will give you rom link .
Note- all files are one place for easy downloading
Please comment below if you successful boot.
Inside download link microg and viper4andriod is also avalible if you like to use then download.
If you don't now rooting or flashing roms please don't waste your time
If you fail to boot don't blame me
IF DOWNLOAD LINK NOT WORK OR NOT PRESENT PLEASE SEE THE COMMENT SECTION I WILL GIVE
THANKS FOR YOUR SUPPORT
Credit
g i z d e v developers
Afleckcrimson
Afleckcrimson said:
Hello friends
After reading many comments and reading many tutorials k3 note users face Oreo ROM do not boot and shows no os is installed or it gives bootloop.
If you are facing these problems then this tutorial help you to boot into Oreo rom successfully.
I know that there is no stable Oreo rom but people try to flash Oreo rom because it is new and having new features .
Firstly use ressurection remix Oreo rom because it is more stable then linage os also it hase endless customisation.
Always use latest twrp for flashing roms ( all links are given at bottom).
So,let's go
1.Firstly boot to your current installed twrp and flash the given twrp.
2.Boot to new recovery and wipe except internal storage I prefer clean install because it does not give any errors.
3.Flash the RR Oreo rom if it shows error again wipe and boot into recovery it does not show any error wait for the installation.
4.Flash latest Gapps nano&picco(arm64) I prefer nano
5.This part is important flash magisk or super su as your wish for root permission.
6.This is the most important part don't boot because we need to path the boot.flash the boot image when you flash the image it shows many options like nvram,recovery etc. choose boot and flash the image .
7.Now boot to system you don't see any error like is is not installed or bootloop.
NOTE:- the boot image I only tried in ressurection remix so try in another roms I don't now it will work or not.
I did not take any responsibility if your phones completely dead,blast or anything.
Please take full nandriod backup into twrp of anything goes wrong.
Download links
This is my second post so I can't add links go
G I z d e v,here you find official and unofficial supported devices find k3 note and download all the required files .
Note- all files are one place for easy downloading
Please comment below if you successful boot.
Inside download link microg and viper4andriod is also avalible if you like to use then download.
If you don't now rooting or flashing roms please don't waste your time
If you fail to boot don't blame me
IF DOWNLOAD LINK NOT WORK OR NOT PRESENT PLEASE SEE THE COMMENT SECTION I WILL GIVE OT.
THANKS FOR YOUR SUPPORT
Credit
g i z d e v developers
Afleckcrimson
Click to expand...
Click to collapse
Download link?
No download link?
Heamnath said:
Download link?
Click to expand...
Click to collapse
Where can I find download link?
Were can i find the download link?
Requirements
We are updating MiUI Notch Notification Mod every week for MiUI dev and stable firmwares. In order to install this mod, you need to match the following requirements:
Xiaomi Android smartphone or tablet
v10 ROM
Unlocked Bootloader (for TWRP)
TWRP custom recovery
How-To
Click the download-button and select your Xiaomi rom version from the list to get the MiUI Notch Notification Mod for your correct MiUI ROM version. You can choose from two different packages, which will let you either Install or Uninstall the mod.
Download the ZIP File
Download link for all version
https://mi-globe.com/mod-download/?modtype=notchnot&id=13&codename=platina&phone=Mi+8+Lite
Copy the File to your phone/tablet
Reboot to TWRP Recovery
Select ‘Install ZIP from /sdcard’
Select the ZIP File
Install and Reboot
I'm in global 10.3.1.0, which version do I use?
renan1217 said:
I'm in global 10.3.1.0, which version do I use?
Click to expand...
Click to collapse
First backup your data after backup flashing last version
https://play.google.com/store/apps/details?id=zanini.andrea.notchtest
use this. no need to wait.
Bootloop?
My phone doesn‘t boot anymore. It is trying to but after a while seeing the bootanimation it restarts into twrp... I didn‘t backup my system. Is everything away now? Also tried installing the disable zip. Problem still there. I think I need to install the rom again with MiFlash