Database Users

[Q] Stuck on logo

Please help me !
today i tried the new ROM (Argen3Stone Defy_By_UserDJ ) after that the camera didn't work so i tried to go back to my original Rom ( CM9-NIGHTLY-120402-Defy ) by using the Restore from the Recovery ( as i have done it a million times) but not after the restoring was finished the device is stuck on the GOOGLE logo..i can't go to the boot menu , i can't do anything..even the blue light isn't showing when the device starts..just as soon as i start the device it shows the ( Google logo ) and stays like that...i even left if for 2 hrs hoping for something to happen...but nothing..when i connect it to the pc..nothing changes and not even a notification on my pc ! i took off the battery for 1 hr,,nothing changed
Please help me ,, my phone isn't working at ALL..no boot menu..no recovery menu nothing..i tried to press the voulme up + the power..nothing happens
what do i do now ??!
My phone is Defy and it was running perfectly on the CM9-NIGHTLY-120402-Defy

wahoby said:
Please help me !
today i tried the new ROM (Argen3Stone Defy_By_UserDJ ) after that the camera didn't work so i tried to go back to my original Rom ( CM9-NIGHTLY-120402-Defy ) by using the Restore from the Recovery ( as i have done it a million times) but not after the restoring was finished the device is stuck on the GOOGLE logo..i can't go to the boot menu , i can't do anything..even the blue light isn't showing when the device starts..just as soon as i start the device it shows the ( Google logo ) and stays like that...i even left if for 2 hrs hoping for something to happen...but nothing..when i connect it to the pc..nothing changes and not even a notification on my pc ! i took off the battery for 1 hr,,nothing changed
Please help me ,, my phone isn't working at ALL..no boot menu..no recovery menu nothing..i tried to press the voulme up + the power..nothing happens
what do i do now ??!
My phone is Defy and it was running perfectly on the CM9-NIGHTLY-120402-Defy
Click to expand...
Click to collapse
litle bit same problem with me, my phone stuck on cyanogen 9 logo, but no bootmenu is showing.

wahoby said:
Please help me !
today i tried the new ROM (Argen3Stone Defy_By_UserDJ ) after that the camera didn't work so i tried to go back to my original Rom ( CM9-NIGHTLY-120402-Defy ) by using the Restore from the Recovery ( as i have done it a million times) but not after the restoring was finished the device is stuck on the GOOGLE logo..i can't go to the boot menu , i can't do anything..even the blue light isn't showing when the device starts..just as soon as i start the device it shows the ( Google logo ) and stays like that...i even left if for 2 hrs hoping for something to happen...but nothing..when i connect it to the pc..nothing changes and not even a notification on my pc ! i took off the battery for 1 hr,,nothing changed
Please help me ,, my phone isn't working at ALL..no boot menu..no recovery menu nothing..i tried to press the voulme up + the power..nothing happens
what do i do now ??!
My phone is Defy and it was running perfectly on the CM9-NIGHTLY-120402-Defy
Click to expand...
Click to collapse
You post is too large(in terms of fonts) to read...it hurt my eyes!!
anyways, about the issue, I guess your phone's battery in not charged. Please make sure to charge the battery using the charger and once it done then boot your phone and when you see blue LED blinking press both volume keys together... this will make your phone to boot into boot menu....now do a data/cache wipe and reboot....
However, if this does not helps then you will be required to flash with the SBF. refer to Defy Developement section - http://forum.xda-developers.com/showthread.php?t=966537.
Hope this helps!!

Rajneeshgadge17 said:
You post is too large(in terms of fonts) to read...it hurt my eyes!!
anyways, about the issue, I guess your phone's battery in not charged. Please make sure to charge the battery using the charger and once it done then boot your phone and when you see blue LED blinking press both volume keys together... this will make your phone to boot into boot menu....now do a data/cache wipe and reboot....
However, if this does not helps then you will be required to flash with the SBF. refer to Defy Developement section - http://forum.xda-developers.com/showthread.php?t=966537.
Hope this helps!!
Click to expand...
Click to collapse
I was just about to say this myself! ^^. Perfect reply. Thread ended
CM7 + CM9 double boot

my friend the problem is that you cant make nandroid buckup of this rom

thank u all for the quick response..and i am sorry for the fonts
as for the problem,,the battery was fully charged and after the problem i left the phone on the charger for over 8 hrs...and for my friend who suggested to use the boot menu during the blue light..the problem is there is NO blue light or any light,,just as soon as i start the device it shows the Google logo and thats it..no light flashing..no options to do anything. if i can go to boot menu or the recovery menu then i can solve the problem..but i am unable to do anything..so i tried using RSDlite to install an SBF file..but the program isn't able to locate my device..
so right now my device isn't able to go into any boot menu ..nor the RSDlite is able to fix it !!!!

wahoby said:
thank u all for the quick response..and i am sorry for the fonts
as for the problem,,the battery was fully charged and after the problem i left the phone on the charger for over 8 hrs...and for my friend who suggested to use the boot menu during the blue light..the problem is there is NO blue light or any light,,just as soon as i start the device it shows the Google logo and thats it..no light flashing..no options to do anything. if i can go to boot menu or the recovery menu then i can solve the problem..but i am unable to do anything..so i tried using RSDlite to install an SBF file..but the program isn't able to locate my device..
so right now my device isn't able to go into any boot menu ..nor the RSDlite is able to fix it !!!!
Click to expand...
Click to collapse
I'm sure you are are able to boot into the boot loader.
Follow below mentioned steps:
To Flash full SBFs, here is the standard procedure:
1. Open RSD Lite: Click on [ … ] Button and select your .SBF (Remember to rename to a short name and put it on root of your PC) and click Open.
2. Boot your phone into Bootloader Mode (check last section if you don’t know how to do it).
3. Now connect your Defy to your PC
4. The START button on RSD Lite should be available now, click and wait.
Click to expand...
Click to collapse
Fore more info refer to the below mentioned link:
http://forum.xda-developers.com/showthread.php?t=1216982
Use any Froyo SBF or Fixed SBF.
Good Luck!!
---------- Post added at 05:00 AM ---------- Previous post was at 04:54 AM ----------
crakeron said:
I was just about to say this myself! ^^. Perfect reply. Thread ended
CM7 + CM9 double boot
Click to expand...
Click to collapse
Thanks for the compliment lol

my dear friend...i don't know what to say..ur really trying to help me and i want to thank u for all ur efforts..but the RSD isn't able to detect my phone..i have used it b4 and i know how it works..but when i connect the phone to the pc nothing happens..not even a voice notification that a device has been connected..therefore the RSD isn't able to start to fix the phone..i've tried holding the vol up + power but nothing..also both vol +power also nothing..just as soon as i connect the device to the pc or the charger it instantly shows the Google logo and thats it! nothing else happens

Same issue, can't use RSD if you can't first get to the bootloader. Read a thread about using a stripped USB cable to hotwire the battery to get power to flash with RSD, but can't figure out how to link in mobile app.
Sent from my beastly Galaxy S 2.

Here http://forum.xda-developers.com/showthread.php?t=892026
Sent from my beastly Galaxy S 2.

[Q] Dead defy mini (black screen at boot/start)

My defy mini phone is dead. When I want to turn it on, the phone vibrate only one time and the screen remains black. I tried to boot in recovery mode and same problem. When I disconnect the battery from phone, the camera led blink. I connected to PC and in Device Manager I see "Flash MSM7225" (without installed driver). I use windows 8 but in windows xp appear same device. Can repair it?
Thank you!

resolved
mahandatman said:
My defy mini phone is dead. When I want to turn it on, the phone vibrate only one time and the screen remains black. I tried to boot in recovery mode and same problem. When I disconnect the battery from phone, the camera led blink. I connected to PC and in Device Manager I see "Flash MSM7225" (without installed driver). I use windows 8 but in windows xp appear same device. Can repair it?
Thank you!
Click to expand...
Click to collapse
resolved!!!

M logo stuck and try to enter in bootloader.
Another problem... I flash my defy mini with two sbf files. First was my stock one and second was flex_WE_Orange_Spain. The phone is stuck in motorola logo. I can't enter in bootloader (black screen). What can I do?
Thanks!

mahandatman said:
Another problem... I flash my defy mini with two sbf files. First was my stock one and second was flex_WE_Orange_Spain. The phone is stuck in motorola logo. I can't enter in bootloader (black screen). What can I do?
Click to expand...
Click to collapse
How did you flashed the second sbf? Inside one session with first sbf? What will you achieved?

jkkk88 said:
How did you flashed the second sbf? Inside one session with first sbf? What will you achieved?
Click to expand...
Click to collapse
No, I flashed first time original sbf, after that I tried to turn on my phone. The phone stuck on M logo. I downloaded another sbf (spanish one) and I flashed with this one. I tried to turn on, but same problem, stuck on M logo. RSD lite said that it finished flash without problems. I can't enter in bootloader (black screen).

mahandatman said:
No, I flashed first time original sbf, after that I tried to turn on my phone. The phone stuck on M logo. I downloaded another sbf (spanish one) and I flashed with this one. I tried to turn on, but same problem, stuck on M logo. RSD lite said that it finished flash without problems. I can't enter in bootloader (black screen).
Click to expand...
Click to collapse
I suppose you have all cards removed. If possible go to recovery mode and try wipe cache and wipe data/factory reset.

can't
jkkk88 said:
I suppose you have all cards removed. If possible go to recovery mode and try wipe cache and wipe data/factory reset.
Click to expand...
Click to collapse
I can't go to recovery mode to make a wipe cache and wipe data/factory reset. The only mode where I can get in is "MBM Flash-mode". From here I tried to flash but phone fails to boot (stuck in M logo).

mahandatman said:
I can't go to recovery mode to make a wipe cache and wipe data/factory reset. The only mode where I can get in is "MBM Flash-mode". From here I tried to flash but phone fails to boot (stuck in M logo).
Click to expand...
Click to collapse
I have no other idea
The last one - but you surely tried it - another sbf...
For my phone for ex. I can confirm TNBST_4_0A.1F.10RPS_flex_WE_Retail_CEE_v2.sbf is working.
It is not serious from Motorola to sell phones with locked bootloaders and I will nobody recommend everything with this logo for future
to even touch.

A solution?
Does anyone have a solution to the problem posted above?
Thank you!!!

Hey, I have read through this thread, because my defy has a black screen and only vibrates once when I start to start it. You wrote you solved this, how did you do this? Thanks for your answer in advance

Phone vibrating continuously every other second . Does not boot up

I was trying to flash a custom ROM in my Lenovo A6000. I rooted the phone with KingRoot. Then using Rashr I flashed the twrp img. I went to recovery and then I made a backup using TWRP's Backup option. I rebooted the phone and again went to recovery Then tapping the Wipe option I went toAdvanced Wipe where I checked the boxes next to Data, System, Cache, Dalvik. After that I went to the Install option where I chose the ROM.zip file from the sd card. The installation failed, I tried to install again but it failed again ( I must have had a bad copy of the file ). Since I had already wiped the system I went to the Restore option, chose the backed up file to restore. The restore was successful. But when I tapped the Reboot button after a couple of seconds the device screen went off and the phone kept on vibrating continuously after short intervals. I tried pressing the POWER button for a long time--> keeps on vibrating. I tried going to recovery by pressing the hardware keys--> still keeps on vibrating. I tried connecting to the computer after taking out the battery and replacing it. NOthing seems to work. It keeps showing the same problem. Please Help...

There is nothing to do with it anymore. Get it back to the customer care center.

Droidkit said:
There is nothing to do with it anymore. Get it back to the customer care center.
Click to expand...
Click to collapse
Will they repair it?
Sent from my Micromax Q380 using XDA-Developers mobile app

Abhishek Hamal said:
Will they repair it?
Sent from my Micromax Q380 using XDA-Developers mobile app
Click to expand...
Click to collapse
They will.

No need to go to customer care.
Power off the phone .
Press vol down and power button and it will boot into boot loader
Connect the USB cable .
Go to ed300's post and download the tarp recovery for lollipop and KitKat.
If the base ROM on which u have flashed the new ROM was KitKat use the KitKat twrp.
Else use the lollipop twrp.
Extract the required zip file.
After connecting the USB after that click on the file named Flash . after its completed click on Boot file .after that's also done again click the Flash file .
After that it will show (waiting for device )
And the phone will boot to the recovery mode and u can flash the ED300's ROM I prefer CM12.1
Good luck.

I have hard bricked my Lenovo A6000 Plus, no fastboot, no recovery, not detected by pc either, just phone is vibrating continuously after pressing the power button. I have seen some tutorials of other Phone brands of how to test point their motherboards, Plz help me to give command or test pin my motherboard chipset as well, I don't know where it is located exactly. Thanks.

Can't boot.. stuck at logo screen

I have a I9505 (Galaxy S4) and after a week I rooted (with CFautoroot) my device rebooted alone and after that I could not get past the logo screen.
I could get to recovery screen but after I deleted the cache (only) I never could get back to recovery screen =/
I tried 3 different firmwares, recovery tools, etc and it didnt make a difference...
I can:
- enter download mode;
- use odin (install roms, pit, etc with no errors);
I cant:
- enter recovery mode (stuck at screen showing "recovery booting" blue text at top and logo).. neither can't go to twrp recovery.. it keeps stuck the same way
one observation is that if I turn off my phone, it actually reboots instead of shutting off. To shut off I need to pull off the battery.
And if I plug my phone on the charge, it shows the battery icon on screen but greyed out with a lightning inside.. not changing to the charging animation
I tried many installations: latest stock rom (jan/2017) downloaded directly from samsung servers (using samfirm, which by the way I completely recommend) with pit (and without it).... tried with CF autoroot.. tried with twrp.. but with no change... I can never get past logo screen =(
I think theres still something installed that could be affecting my phone, is that possible? The question is: when I install pit + rom, it removes everything?
I dont mind losing all my data, so if there's anything that I could do to restore my phone to 'original' state I would do it.

Try this:
open Odin 3.07 and uncheck everything except f reset time;
flash the phone without a pit file;
when you see the word "RESET" in the status window, remove USB cable from the phone, remove the battery, replace the battery, use buttons to boot into recovery;
wipe cache, wipe data, reboot.

audit13 said:
Try this:
open Odin 3.07 and uncheck everything except f reset time;
flash the phone without a pit file;
when you see the word "RESET" in the status window, remove USB cable from the phone, remove the battery, replace the battery, use buttons to boot into recovery;
wipe cache, wipe data, reboot.
Click to expand...
Click to collapse
Thank you for the response audit13
I did as you told with odin 3.07 (I was using 3.11) and recovery didn't open
Its stuck with recovery booting at top screen for ~5min now.. =/

Is the model # gt-i9505 in download mode?

I did everything ok with no errors (steps 1,2,3) and ONLY AFTER that, the recovery didn't open.
And it's stuck with 'recovery booting' text at top screen until now...
obs.: I think the way I explained it seemed I didn't went on download mode but I did =)

I have a similar issue like this. for my shve330l i updated to the latest update via ota. and then flash rr rom onto the phone without issue. used it for a few days, but mobile network wasn't working that well. it wipe the clavik and cache and that's when all hell broke lose with it constantly rebooting and having the blue text with recovery booting load and it's been stuck like that for a while now. flashed the stock roms to no help with the same result.

UnBrick device - Lenovo A1000

Hello, can somebody help me with a Lenovo A1000 ?
At first the phone did not boot, it was stuck at the boot logo so I thought it might be an easy fix , just to reflash the phone .
I managed to get into recovery mode and from what I remember , it was written in red color this text : " a1000_usr_s29798_1511241708_sprd7731_ro "
Then I read on the internet the procedure on how to flash the phone, installed all the drivers and the SPD upgrade tool version 4 and flashed the firmware : " Lenovo_A1000_S113_SPRD7731_20170525 " but after the flashing was done, the phone does not respond to anything anymore, it does not open , does not show anything if I plug in the charger, no recovery , no boot logo , nothing. It only "works" when trying to flash with SPD upgradetool if I hold the volume buttons pressed and insert the cable , then SPD flashes it again, and only with that specific firmware, I have tried multiple ones but they always fail, at repartitioning.
The phone is dual sim if that makes a difference, and on the back it only said A1000 , i dont see the "m" anywhere to indicate that it's a A1000m model.
I have tried to flash it over & over again, disabled the imei and nv options in the two gears in SPD , it flashes but no boot , no response from the phone after the flash is done, nothing.
I opened the phone to look inside if the connectors are all attatched, everything seems fine hardware wise.
If anybody knows anything on how to revive the phone, I would appreciate it & thank you in advance.