Firmware Details :-
Android Version: - Android OS v6.0 (Marshmallow).
Micromax Canvas Unite 4 Plus : - Q427 plus.
Status : type :- Official
type:- ".Zip" file & Tool.
File Size :- 1.34MB
Guide To Install Firmware :-
Extract Downloaded File Zip File Via WinZip and; 7zip.
Install USB Drivers.
Now Open The SP Flash Tool & Click The Download Tab Button.
Now Click Scatter-Loading Button & Browse And Select The Extracted Firmware [scatter.txt] File Which You Have Already Downloaded.
Now Hit The Download Button.
Switch Off Your Phone & Connect Your Phone To The PC.
After The Flashing A Green Tick Will Be Appear.
Disconnect Your Phone And Make It On
.
thanks
Very nice. I haven't tried to flash the official firmware, but i am just amused to see that atleast there is someone who is contributing for this device. Dude i would like to ask you, do you know how to root micromax unite 4 plus?
Please create a rom for micromax canvas unite 4 plus
Related
I have tried many 2.2's on the spica and i want to flash it to this version of the original firmware - I570EXXJH1
I have downloaded this from samfirmwares and after opening it i t contained 2 files, a eSER.tar file and a SS_DL.dll.
Also it said that the New .ops file is required is required,but the link does not work.
I also have odin 4.03 with some ops file in it,don't know wether it's old or new.
1.can anyone post the link to the New .ops file.
2.So what all should i select in odin ?
Guys, any one ? i Badly need the new ops file and the procedure as the phone is very unstable...
I would use the Samdroid forum, they should be able to help.
I have a Spica and it verty stable (and fast) using CM 8.3.2 and Yonip V12 kernel.
boxy44 said:
1.can anyone post the link to the New .ops file.
2.So what all should i select in odin ?
Click to expand...
Click to collapse
1. You need spica_jc3.ops- here is the correct one (if it downloads as .ops.txt just remove .txt)
2.Firmware file should be named i5700XXJH1.tar or in a similar manner.
SS_DL.dll must remain in the same directory where .tar firmware is located
a) put the phone to download mode and connect USB cable
b)start Odin and see if the phone is found- in top left field you should se COM port number. If there isn't- check in Device Manager if drivers are correctly installed
c) load spica_jc3.ops as OPS file and firmware as One Package file
d) select OnePackage option, leave other options as they are- Reset Timer, Protect Ops and Reset Timer (300) should be selected by default
e) click Start button, don't touch the phone and PC, sti back and wait
f) when flashing is done phone will reboot, you can safely unplug USB and close Odin
Hoping I could get this finally resolved with a little bit of help. I'm running a Kit Kat Rom (Mahdi Rom) and trying to revert back to Stock 4.2.2.
I've tried countless scenarios and i keep getting 2 problems. The First is:
When im in R&D Test Tool and run Normal Upgrade test and "Upgrade Start". I cannot select a language to select it's blank.
After i proceed i get the following problem " i get stuck on 49% and it starts all over again" it wont pass that state
I've tried both of these methods and ran all files as Admin
How to flash ROM:
The Files are Hosted on my server for fast speeds!
1). Download all The Files Below!
1.2). Firmware Files are HERE!
1.3). Download R&D FlashTool & Other Files :Here
1.4).Download Drivers HERE!
Quote:
2. unzip
- LGMOBILEAX
- LG_KDZ_FW-Update_OfflineFix
3. install B2CAppSetup.exe in
LG_KDZ_FW-Update_OfflineFix\KDZ_FW_UPD_EN
4. go to C:\ProgramData\LGMOBILEAX
remove all files and folder
5. copy all files and folders from LGMOBILEAX that you unzip from step2 to C:\ProgramData\LGMOBILEAX
Method 1. work with vbs script
1. run Automatic Offline Procedure.vbs in \LG_KDZ_FW-Update_OfflineFix folder
2. now R&D test tools appear please select KDZ File
3. select Normal web upgrade test
4. Select Upgrade start
5. In Select Country & Langauage Please Select Country to Different Country (do not worry if does not has Langauage to select )
6. Process Flashing firmware start...Please waiting just moment.
7. for process 100% you is finishing flash return to stock firmware
Method 2. edit host file
thank @Hid3rs
1. Go to windows/system32/drivers/etc/ and open your hosts file! (open it with wordpad)
2 . Add this line at the end of the document:
127.0.0.1 csmg.lgmobile.com
3. Save hosts file
4. Install msxml (you can find it in the downloaded KDZ_FW_UPD_EN folder)
5. Start http in the shttps folder
6. Start Windows Enabler and turn it on (system tray!)
7. Start UpTestEX_mod2_marwin
8. Flash your .kdz as you normally would
Any Help would be greatly appreciated
itworks78 said:
Hoping I could get this finally resolved with a little bit of help. I'm running a Kit Kat Rom (Mahdi Rom) and trying to revert back to Stock 4.2.2.
I've tried countless scenarios and i keep getting 2 problems. The First is:
When im in R&D Test Tool and run Normal Upgrade test and "Upgrade Start". I cannot select a language to select it's blank.
After i proceed i get the following problem " i get stuck on 49% and it starts all over again" it wont pass that state
I've tried both of these methods and ran all files as Admin
How to flash ROM:
The Files are Hosted on my server for fast speeds!
1). Download all The Files Below!
1.2). Firmware Files are HERE!
1.3). Download R&D FlashTool & Other Files :Here
1.4).Download Drivers HERE!
Quote:
2. unzip
- LGMOBILEAX
- LG_KDZ_FW-Update_OfflineFix
3. install B2CAppSetup.exe in
LG_KDZ_FW-Update_OfflineFix\KDZ_FW_UPD_EN
4. go to C:\ProgramData\LGMOBILEAX
remove all files and folder
5. copy all files and folders from LGMOBILEAX that you unzip from step2 to C:\ProgramData\LGMOBILEAX
Method 1. work with vbs script
1. run Automatic Offline Procedure.vbs in \LG_KDZ_FW-Update_OfflineFix folder
2. now R&D test tools appear please select KDZ File
3. select Normal web upgrade test
4. Select Upgrade start
5. In Select Country & Langauage Please Select Country to Different Country (do not worry if does not has Langauage to select )
6. Process Flashing firmware start...Please waiting just moment.
7. for process 100% you is finishing flash return to stock firmware
Method 2. edit host file
thank @Hid3rs
1. Go to windows/system32/drivers/etc/ and open your hosts file! (open it with wordpad)
2 . Add this line at the end of the document:
127.0.0.1 csmg.lgmobile.com
3. Save hosts file
4. Install msxml (you can find it in the downloaded KDZ_FW_UPD_EN folder)
5. Start http in the shttps folder
6. Start Windows Enabler and turn it on (system tray!)
7. Start UpTestEX_mod2_marwin
8. Flash your .kdz as you normally would
Any Help would be greatly appreciated
Click to expand...
Click to collapse
This is a Development section not a Q&A section. There's another section for this.
I found a site with a tutorial on how to install Android 7.0 on P9 lite.On version VNS-L31C636B361 there are 3 files, and acording to them, you need to follow these steps:
Extract the contents of the zip files you downloaded from above.
Create a folder named “dload” in the root directory of your device’s SDcard.
Copy all the extracted contents of the zips into the dload folder.
Open the dialer app and dial *#*# 2846579#*# *
Select Project Menu > Software upgrade > SDcard upgrade > confirm the installation.
The firmware will begin installing and once that is done your device will reboot automatically.
But the problem is, if I extract all the contents from all 3 files, some of them have the same name and overwrite, and when I try to install by *#*# 2846579#*# *, it stops after 5% and gives me fail error.
What is the correct way to install and why are there 3 separate files ? (also, do I need to have some settings ? the phone should be connected to PC while installing ? )
Thank you very much!
What model you have?
Seems you have another oeminfo...
i have the same problem, it runs now on version vns-l31c432b161, if a want to install android 7 i get the same message as above
gtdaniel said:
What model you have?
Seems you have another oeminfo...
Click to expand...
Click to collapse
the omeinfo is 100% the same, otherwise if would have said its not compatible.The problem is there are 3 different files for this model to download, and if u extract them in the same folder, they overwrite ? What is the correct way to install them ?
erader said:
the omeinfo is 100% the same, otherwise if would have said its not compatible.The problem is there are 3 different files for this model to download, and if u extract them in the same folder, they overwrite ? What is the correct way to install them ?
Click to expand...
Click to collapse
EDIT: i tried again and it stucks on 5%, doesnt say anything.
Good to know!
If you are in MM 6.0 you can not go to Nougat 7.0 without some preparation until Huawei release official version.
I you are already in Nougat 7.0 (B3xx) you can go to B360-B361, directly with Sdcard upgrade or with three keys pressed method.
U dint answer my question though.Let me be more clear.
Here is a tutorial on how to install Android 7.0 on P9 Lite: http://www.droidviews.com/update-huawei-p9-lite-manually-official-android-7-0-nougat-emui-5-0/
On my model, there are 3 files:
4. VNS-L31C636B361
update.zip
update_data_full_VNS-L31_B360_hw_meafnaf.zip
update_data_full_VNS-L31_B361_hw_meafnaf.zip
and they say
Extract the contents of the zip files you downloaded from above.
Create a folder named “dload” in the root directory of your device’s SDcard.
Copy all the extracted contents of the zips into the dload folder.
But some of the files from these 3 .zips have the same name, and when I copy them in the same folder, they overwrite.
Is that tutorial sh1t ?
Hello everyone ! I hope you're all doing all right
I make a third post about my issues (and probably yours for those who have the same phone) on reinstalling the original firmware of my Crosscall Trekker M1.
My situation had evolved since the time I started making researchs on that phone.
For now I have the original Firmware and the method to install it.
There are the links of my 2 previous topics on that subject if you want to learn more :
HTML:
https://forum.xda-developers.com/general/help/apply-update-sdcard-failed-rooted-t3676453
HTML:
https://forum.xda-developers.com/general/help/crosscall-trekker-m1-how-to-reinstall-t3691514
(For thoses who want to have it, here's the link of the firmware)
HTML:
https://www.dropbox.com/s/zpz2p0b75rlw1pl/LU652R%28HS-L635%29_L1185.6.02.00.EU00_MultiDownload_201601292005_user.tar.gz?dl=0
So it appears that I can reinstall the stock rom as an uptade with a sdcard by going on the Emergency Mode
(When the phone is power down : press volume buttons + & - and power button to go on the emergency mode)
The firmware at first is compress on a .tar.gz format.
When I extract the archive with 7zip, I got a i635.v1 file
I'm suppose to put it on the root of the sdcard to perform the installation.
So I formatted my sdcard and put the file on the root.
I put the sd card on the phone
Unfortunately for me when I start the phone on Emergency mode I have an error message:
No update file on TFcard
There are somes pictures that I took during that operation so you can see step by step :
My 32gb sd card just formatted
The contain of the ROM
Here you can see the extension of the i635.v1
Here you can see the ROM archive before I extracted it
This is when I launch the device on Recovery mode (by pressing Vol - and Power buttons)
This is what the Recovery mode looks like
The Rom appear on the Recovery mode
This is what appear when I launch the device on Emergency mode
And this is the error that I have
On an other tutorial who explain how to install the ROM with an sdcard,
I saw that the extension of the unzipped archive should be i635.v1.bin
Link of the tutorial mentionned
HTML:
http://forum.gsmdevelopers.com/showthread.php?t=8728
I started to think that my problem for now is the format of the ROM.
Maybe I need to convert it on .bin
Am I wrong ? Does someone got any more clues ?
I'll stay alert on the post and during the time I'll have an answer I wich you a nice day ! :good:
Asalam Alaikum! (Greetings)
I am having issue on connecting my Samsung on Odin, when i put my Samsung in Download Mode and Check Odin, there is no device shows and also Taskbar shows Unknown Device. Is there any Custom Rom available for Samsung J3 Pro (SM-J3110) which i can put on memory card and installed it, because my mobile has TWRP Recovery installed.
Thank You,
Regards,
Muhammad Naveed Haroon
Maybe you receive a (more) suitable answer if you post in one of the respective Samsung J3 forums:
https://forum.xda-developers.com/galaxy-j3-2016
https://forum.xda-developers.com/galaxy-j3-2017
Make a custom rom
How I can make a custom rom without PC in a smart phone? Please answer me.
NaveedHaroon said:
Asalam Alaikum! (Greetings)
I am having issue on connecting my Samsung on Odin, when i put my Samsung in Download Mode and Check Odin, there is no device shows and also Taskbar shows Unknown Device. Is there any Custom Rom available for Samsung J3 Pro (SM-J3110) which i can put on memory card and installed it, because my mobile has TWRP Recovery installed.
Thank You,
Regards,
Muhammad Naveed Haroon
Click to expand...
Click to collapse
Alaikum salam
Did you downloaded the samsung drivers??
Custom rom
I searched in the net and now I know that there is no any custom rom for this phone (sm-j3110) but u can make one using your PC or your mobile phone.
1.download its official rom
2.decompile your rom and extract system.img.ext4 and boot.img both.(winrar need)
3.decompile system.img.ext4 file ( many apps available for PC to do this but in android just android image studio (ais) =>( This app does not require root)available)
4.put all files and folders into a folder and rename it as system
5.download the file which exists in https://forum.xda-developers.com/an...oid-o-beta-redesigned-emoji-set-t3608280/amp/ and then extract the meta-inf folder.
6.create a new folder and rename it as custom rom and move the system folder which you make it in step 4 ,move boot.img file and meta-inf which you extracted it in step 5
7.compress all as custom rom
8.put the custom rom into you sd card and after wipping data and cache ,install the custom rom, magisk and nano package of 5.1 arm gapps
9.reboot your device and enjoy ☺☺☺
#attention
Your device maybe take bootloop so do it with your own risk and I'm not responsible for the problems