Database Users

see imei number on i5800?

I can't see imei number.
pls help me

*#06# ........

god_md5 said:
*#06# ........
Click to expand...
Click to collapse
in application settings switch off "development" option, then you can try this code.
And read this: http://forum.xda-developers.com/showthread.php?t=778880

Galaxy y (imei =0000000000000)

I got a boot loop in my galaxy ,so i flashed it with stock roam(india).
but when i started the phone the IMEI was "000000000000000"
i dont have any backup of the efs file...
so please help me to restore the IMEI
my IMEI is=357649047436830
s/n=RVYBA35469f

contect doky73.....
Sent from my GT-S5360 using xda premium

Doky73 said:
nilesh.remo said:
Imei no. Blank and dont make calls , network resitration fail...pls sir help me
Click to expand...
Click to collapse
Short instructions:
- download Galaxy Toolbox from Google Play Store
- do backup with Galaxy Toolbox
- look for /sdcard/SGYunlock/bml15.img.SAVE file
- transfer the file to PC (and make an additional backup of it)
- open the file in a HEX editor (Google for it)
- look for address 0x80000
- enter your IMEI here as ASCII - 15 digits (I suppose, you know your IMEI - it's in the device's back, behind the battery)
- save, and transfer the file back to the SDCARD
- do a Restore with Galaxy Toolbox
- reboot and enjoy!
And please consider, changing IMEI might be an illegal action!
Click to expand...
Click to collapse
thanks to sir doky73....
Sent from my GT-S5360 using xda premium

Nice , i bookmarked this for future use.

jaison thomas said:
Nice , i bookmarked this for future use.
Click to expand...
Click to collapse
If you want to be safe, do a bml15 backup with Galaxy Toolbox, before you do any risky action!
It's free, and won't hurt
bml15 partition contains the EFS data in our Y, so it's good advice to have backup
I suppose, karthikeyanmech09 accidentally clicked the "Clear EFS" in Odin, which was a serious mistake...

nilesh.remo said:
thanks to sir doky73....
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
plss help i lost my IMEI my phone is gt-s5830i i follow the instruction but i cant find any 0x80000 plss help me

Doky73 said:
If you want to be safe, do a bml15 backup with Galaxy Toolbox, before you do any risky action!
It's free, and won't hurt
bml15 partition contains the EFS data in our Y, so it's good advice to have backup
I suppose, karthikeyanmech09 accidentally clicked the "Clear EFS" in Odin, which was a serious mistake...
Click to expand...
Click to collapse
Hi, i'am in the same situation that marchellei (i have the same phone)
I can't find any 0x80000 in the "bml15.img.SAVE" file when i open it with a HEX editor.
Please Doky73. Can you help us?
Thanks in advance.

zote2 said:
Hi, i'am in the same situation that marchellei (i have the same phone)
I can't find any 0x80000 in the "bml15.img.SAVE" file when i open it with a HEX editor.
Please Doky73. Can you help us?
Thanks in advance.
Click to expand...
Click to collapse
0x80000 is the address, where IMEI should reside.
Sent from my SGSII using Tapatalk 2 & Swype

Hi doky can u give us a guide or a screenshot how to make the thing work...i hv same problem the imei shows 000000000 after i flash with some custom rom....
Sent from my GT-I8150 using Tapatalk 2

unsuccessful
Doky73 said:
0x80000 is the address, where IMEI should reside.
hi.thanks for the great tool.my IMEI is blank insted of zeroes. stil i gave it a try.couldnt restore. found my IMEI at 0x80000 did the procedure but didnt helped.what shall i do?
Click to expand...
Click to collapse

yokeshi said:
Doky73 said:
0x80000 is the address, where IMEI should reside.
hi.thanks for the great tool.my IMEI is blank insted of zeroes. stil i gave it a try.couldnt restore. found my IMEI at 0x80000 did the procedure but didnt helped.what shall i do?
Click to expand...
Click to collapse
A few things you can do
1- toolbox doesn't work on cm7 (build prop different) so use stock based if on cm7
2- change kernels
3- if on Hyperion flash ril fix from op
4- try ril fix anyway on any rom
5- flash stock rom via odin
6- change baseband (flash a different stock rom to what it is currently)
Click to expand...
Click to collapse

HAi saya mengalami kehilangan sinyal hp gt s5360 saya, alamat imei saya=356097051001713
MOHon bantuannya thankyoi

product code change gts-5369

hi guys, is there a way to change the samsung galaxy y( gts-5369) product code into a gts-5360 product code in order to update it directly by kies or by ota without any problems?
thanks a lot in advance

thom80 said:
hi guys, is there a way to change the samsung galaxy y( gts-5369) product code into a gts-5360 product code in order to update it directly by kies or by ota without any problems?
thanks a lot in advance
Click to expand...
Click to collapse
change using root explorer and build.prop editing
ro.product.model=GT-S5360

Tgzgamez said:
change using root explorer and build.prop editing
ro.product.model=GT-S5360
Click to expand...
Click to collapse
thanks, where can i find this file in the phone root? in which directory?

Answer is here ^_^
thom80 said:
thanks, where can i find this file in the phone root? in which directory?
Click to expand...
Click to collapse
Root ur SGY! Install Root Browser! Go to system folder open build.prop with Text Editor! Then find
Code:
ro.product.model=GT-S5369
and replace it with
Code:
ro.product.model=GT-S5360
Prezz thanks

death_sinker said:
Root ur SGY! Install Root Browser! Go to system folder open build.prop with Text Editor! Then find
Code:
ro.product.model=GT-S5369
and replace it with
Code:
ro.product.model=GT-S5360
Prezz thanks
Click to expand...
Click to collapse
i go to try now and i'll let you now.. thanks sinker..

thom80 said:
i go to try now and i'll let you now.. thanks sinker..
Click to expand...
Click to collapse
Any Time!

thom80 said:
i go to try now and i'll let you now.. thanks sinker..
Click to expand...
Click to collapse
in the file build.prop ro.product.model=GT-S5360,it's just modified and i didnt anything but kies cant update it and when i type *2767*4387264636# to View Product Code , these are the results : pcode GT-S5369TKAOMN
.nothing changed

thom80 said:
in the file build.prop ro.product.model=GT-S5360,it's just modified and i didnt anything but kies cant update it and when i type *2767*4387264636# to View Product Code , these are the results : pcode GT-S5369TKAOMN
.nothing changed
Click to expand...
Click to collapse
Try Installing GT-S5360 Firmware on it

R: product code change gts-5369
Yes i did it,i d like to change the pcode in order to update it everytime via kies or ota,but maybe in this phone it is not so easy to change it ,in the past doky told that the folder with pcode,imei etc in this phone is hidden and encrypted
Sent from my GT-S5360 using xda app-developers app

thom80 said:
in the file build.prop ro.product.model=GT-S5360,it's just modified and i didnt anything but kies cant update it and when i type *2767*4387264636# to View Product Code , these are the results : pcode GT-S5369TKAOMN
.nothing changed
Click to expand...
Click to collapse
If you root your phone, you obviously cannot update via kies, as you will lose root.
Try unrooting your phone using this:
Then try updating it via Kies.

[Q] T530NU Pit file???

Hello guys,
I'm new to the forum, but i am having a serious issue with my galaxy tab T530NU.
can anyone post me the pit file for the above model.
Thank you very much

nadimrishmawi said:
Hello guys,
I'm new to the forum, but i am having a serious issue with my galaxy tab T530NU.
can anyone post me the pit file for the above model.
Thank you very much
Click to expand...
Click to collapse
Hi ,
How to make a PIT look http://forum.xda-developers.com/showpost.php?p=56571584&postcount=1 .
I think that my pit for SM-T530 can approach, and if not will approach, then everything will remain as before.

hi,
okay, i recommend following @repey6 's suggestion
and then comparing the pit file you generate/extract
with the one i extracted with the following command.
dd if=/dev/block/mmcblk0 of=/sdcard/out.pit bs=8 count=481 skip=2176
link- edit -fails
to curb the noob menace, extract the file first. :cyclops:
looking at the file i believe the name of the pit file should be PITMSM8x26.pitH
if incorrect remove the H
i have attached the file for comparison. Execute the same above command in your device's own terminal [any interested user]
to generate your own out.pit for comparison with the output from repey6 's suggestion.
m

moonbutt74 said:
hi,
okay, i recommend following @repey6 's suggestion
and then comparing the pit file you generate/extract
with the one i extracted with the following command.
dd if=/dev/block/mmcblk0 of=/sdcard/out.pit bs=8 count=481 skip=2176
link- http://d-h.st/Zajw
to curb the noob menace, extract the file first. :cyclops:
looking at the file i believe the name of the pit file should be PITMSM8x26.pitH
if incorrect remove the H
i have attached the file for comparison. Execute the same above command in your device's own terminal [any interested user]
to generate your own out.pit for comparison with the output from repey6 's suggestion.
m
Click to expand...
Click to collapse
Hi , what TAB you have ?

repey6 said:
Hi , what TAB you have ?
Click to expand...
Click to collapse
repey,
hi, i have an sm-t530nu.
m

moonbutt74 said:
repey,
hi, i have an sm-t530nu.
m
Click to expand...
Click to collapse
m , sorry I do not speak English very well, so I do not quite understand what I should do. And why? I SM-T530. My pit is absolutely correct and reliable.
Regards .

repey6 said:
m , sorry I do not speak English very well, so I do not quite understand what I should do. And why? I SM-T530. My pit is absolutely correct and reliable.
Regards .
Click to expand...
Click to collapse
repey,
hi, my interest is in finding out if the pit i pulled using the command i mentioned is correct.
can you post yours so i can compare them?
m

moonbutt74 said:
repey,
hi, my interest is in finding out if the pit i pulled using the command i mentioned is correct.
can you post yours so i can compare them?
m
Click to expand...
Click to collapse
Do you want me to do out.pit through the terminal to your recipe? And then you want to compare them?

repey6 said:
Do you want me to do out.pit through the terminal to your recipe? And then you want to compare them?
Click to expand...
Click to collapse
repey,
hi, can you post the pit file you generated with efs pro?
m

moonbutt74 said:
repey,
hi, can you post the pit file you generated with efs pro?
m
Click to expand...
Click to collapse
So this pit I made using efs pro

repey6 said:
So this pit I made using efs pro
Click to expand...
Click to collapse
repey,
hi, okay so can you post it? i'd like to see it.
m

moonbutt74 said:
repey,
hi, can you post the pit file you generated with efs pro?
m
Click to expand...
Click to collapse
moonbutt74 said:
repey,
hi, okay so can you post it? i'd like to see it.
m
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=56133249&postcount=3

repey,
hi, thanks, iwas trying to figure out if the command i was talking about before worked for the galaxy tab4.
Your pit file looks similar to mine so i think the command does work like on other samsung devices.
thanks. :good:
m

moonbutt74 said:
repey,
hi, thanks, iwas trying to figure out if the command i was talking about before worked for the galaxy tab4.
Your pit file looks similar to mine so i think the command does work like on other samsung devices.
thanks. :good:
m
Click to expand...
Click to collapse
Before we found efs pro, we've done a lot of attempts to create a pit terminal. All failed. With efs pro obtained 100% results.

repey6 said:
Before we found efs pro, we've done a lot of attempts to create a pit terminal. All failed. With efs pro obtained 100% results.
Click to expand...
Click to collapse
repey,
does efs handle custom pit creation ?
if not, do you know of an application that does?
m

moonbutt74 said:
repey,
does efs handle custom pit creation ?
if not, do you know of an application that does?
m
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...ol-updated-09-06-14-efs-professional-t1308546

Pit
Thank you all,
the thing is that my tab tells me : memory damaged reset device. and i cannot boot into recovery mode, the only thing that i can boot into is download mode, and when i tried to flash a rom it fails telling me that mmc write failure . and when i searched in all forums, i understood that my tab's PIT is corrupted and i need a new one in order to flash it with odin .along with a rom. i tried the pit that moonbutt74 posted but still the same thing . It fails.

nadimrishmawi said:
Thank you all,
the thing is that my tab tells me : memory damaged reset device. and i cannot boot into recovery mode, the only thing that i can boot into is download mode, and when i tried to flash a rom it fails telling me that mmc write failure . and when i searched in all forums, i understood that my tab's PIT is corrupted and i need a new one in order to flash it with odin .along with a rom. i tried the pit that moonbutt74 posted but still the same thing . It fails.
Click to expand...
Click to collapse
M Ask for him to make a pit with efs pro . How get pit read http://forum.xda-developers.com/tab-4/general/guide-how-to-pit-file-qualcomm-device-t2932088 .

M can you do it for me?
thanks

nadimrishmawi said:
M can you do it for me?
thanks
Click to expand...
Click to collapse
You can to try my pit and your stock firmware at the same time via Odin .

Help: how to change watchface cognos dz11 / v8

Is there anyone can change watchface dz11/ v8. When i opened the file_01_mtk with mtk resource its not show anything. Please help me

https://forum.xda-developers.com/smartwatch/other-smartwatches/readback-extractor-mtk6260-firmware-t3289272/page98
vayxal said:
Is there anyone can change watchface dz11/ v8. When i opened the file_01_mtk with mtk resource its not show anything. Please help me
Click to expand...
Click to collapse

junedt said:
https://forum.xda-developers.com/smartwatch/other-smartwatches/readback-extractor-mtk6260-firmware-t3289272/page98
Click to expand...
Click to collapse
Can you upload your original fullflash Backup i can change the watchfaces
oxa

oxatools said:
can you upload your original fullflash backup i can change the watchfaces
oxa
Click to expand...
Click to collapse
send your email
---------- Post added at 10:11 AM ---------- Previous post was at 09:46 AM ----------
[email protected] help

junedt said:
https://forum.xda-developers.com/smartwatch/other-smartwatches/readback-extractor-mtk6260-firmware-t3289272/page98
Click to expand...
Click to collapse
with mtk resource editor there is no chance to change watchface of MT6261/MT6260 SmartWatch Firmware. Thes Firmwares use compressed resources. So you have to unpack the compressed parts and repack them. Not easy but possible

oxatools said:
with mtk resource editor there is no chance to change watchface of MT6261/MT6260 SmartWatch Firmware. Thes Firmwares use compressed resources. So you have to unpack the compressed parts and repack them. Not easy but possible
Click to expand...
Click to collapse
How to edit watchfaces of mtk6261d ("romdz09.jar does not work")
i dont know to work with hex editors and also i cant pay for chinaeditor can we get any similar thing for free
can you change watchfaces and bootlogo and icons for me?
i can give you my dump/firmware

dz11 bricked
PriyanshuHacks said:
How to edit watchfaces of mtk6261d ("romdz09.jar does not work")
i dont know to work with hex editors and also i cant pay for chinaeditor can we get any similar thing for free
can you change watchfaces and bootlogo and icons for me?
i can give you my dump/firmware
Click to expand...
Click to collapse
can you give that to me, please
[email protected]
i just bricked mine