Database Users

[Q] Huawei U8800-51

Does anyone have the official stock rom for this phone that they can send to me. If you do please send it because my phone is acting up and its irritating.

bweezy31 said:
Does anyone have the official stock rom for this phone that they can send to me. If you do please send it because my phone is acting up and its irritating.
Click to expand...
Click to collapse
No one has it, and I really mean no one. I called AT&T and Huawei as well and they don't have it. We're out of luck.
Sent from my iPad using Tapatalk

Well i sent my phone back monday so i should get it today.

bweezy31 said:
Well i sent my phone back monday so i should get it today.
Click to expand...
Click to collapse
Sounds great. The stock rom could really help out other users who really need it.
Sent from my iPad using Tapatalk

Im going to need help if im going to put it on here.

bweezy31 said:
Im going to need help if im going to put it on here.
Click to expand...
Click to collapse
You will have all te help you need to do so.. just ask

skipped said:
You will have all te help you need to do so.. just ask
Click to expand...
Click to collapse
skipped will walk you through everything that needs to be done.
Sent from my iPad using Tapatalk

Moved To Q&A​
Please post questions in the Q&A section​

I just got my phone with a fresh new stock 2.2.2 froyo!

bweezy31 said:
I just got my phone with a fresh new stock 2.2.2 froyo!
Click to expand...
Click to collapse
Please do a full backup of the bootloader! So we all can fix our device..!
The procedure is easy and you just take about 8 minutes..
You have to download this tool (for windows)
http://www.roadkil.net/program.php?ProgramID=12
1- Download the tool "Roadkil's Disk Image"
2- Enter to pink screen (volume up and down, then power on)
3- Connect your phone to the computer through the backside usb port (its more safe)
4- Run the tool
5- Click on the "Store Image" tab.
6- In "Store Image to" click the combobox and choose "Physical Disk #" ("#" is a number)
* If there are more than one "Physical Disk #", then you have to choose the one that is about 3.6gb.. This part is very important.. if you give us a backup from another disk, it will leave our phone unusable.
*To be sure that that Physical Disk you choose is the Huawei u8800-51, You can run the tool again (because it has to refresh) without the phone connected, then check which disks are available. Then, close the tool again, connect the device (in pink screen), run the tool, and check what physical disk was added. But it will be about 3.6gb.
7- In "source file", save the file as "u8800.img" in a folder with more than 4gb of storage available.
*There is no risk for you, as it is just data copying, not writting. The risk is for us if you gave us a wrong file hehe..
*If you compress the "u8800.img" file into a "rar" file, the size will be about 700 mb, then please, upload the file into mediafire or some file hosting service.
Thanks man! It will be very useful to many people!
----
*For the ones who do the restore from the file, they have to do something to get the "u8800.img" to work. I will post here what do they have to do before writing to the disk, so Don't restore until I explain it here, or it wont work! and you may have errors!

im about to do it now and sorry im late i never got a chance to do it.

Its not letting me run the program.

bweezy31 said:
Its not letting me run the program.
Click to expand...
Click to collapse
Whaats the error?

it says
Unable to execute file:
C:\Program Files\Roadkill.Net\DiskImage_1_6_WinAll.exe
CreateProcess failed; code 740.
The requested operation requires elevation.

No worries, someone already did it!
Download u8800-51 Impulse 4g (AT&T version) Linux Backup posted here!
I tested it myself.
http://forum.xda-developers.com/showthread.php?t=1567113

skipped said:
No worries, someone already did it!
Download u8800-51 Impulse 4g (AT&T version) Linux Backup posted here!
I tested it myself.
http://forum.xda-developers.com/showthread.php?t=1567113
Click to expand...
Click to collapse
3G/4G works now?
Also, can you post a tutorial on how to downgrade using the file. Thanks in advance!

KayxGee1 said:
3G/4G works now?
Also, can you post a tutorial on how to downgrade using the file. Thanks in advance!
Click to expand...
Click to collapse
Ok I will post the tutorial later.. But about the 3g.. It is working, but you have to do factory reset after you restore from the linux backup..
Also, you will have the IMEI of the person who did the backup.. I tried to restore mine and I did it, but when I restored it, the 3g stopped working.. But in "about" it showed me my imei.. My IMEI backup was made when I already updated to u8800pro..
Maybe the files that this tool (5iromtoolbox) backup are the key for having 3g in the u8800pro rom.. (also with the libril-qc-1).. I dont know.. we should test it later..
Remember.. keep the original IMEI (not yours) and you will have 3g or H+.. whathever--
Advices:
- Do the full backup in Linux
- Backup IMEI (5iromtoolbox)
- Backup CWM
- Backup APN

skipped said:
Ok I will post the tutorial later.. But about the 3g.. It is working, but you have to do factory reset after you restore from the linux backup..
Also, you will have the IMEI of the person who did the backup.. I tried to restore mine and I did it, but when I restored it, the 3g stopped working.. But in "about" it showed me my imei.. My IMEI backup was made when I already updated to u8800pro..
Maybe the files that this tool (5iromtoolbox) backup are the key for having 3g in the u8800pro rom.. (also with the libril-qc-1).. I dont know.. we should test it later..
Remember.. keep the original IMEI (not yours) and you will have 3g or H+.. whathever--
Advices:
- Do the full backup in Linux
- Backup IMEI (5iromtoolbox)
- Backup CWM
- Backup APN
Click to expand...
Click to collapse
Sounds great! I just miss 3G haha.
Also, I'd be willing to test things out.

What is the differrene about u8800 andu8800 - 51?

The processor and the WCDMA bands I think

Stuck on OptimusRs Pro 2 Rom KK.

So i've flashed OptimusRs's rom yesterday and i made a mistake by not flashing it with the costume recovery he gave on his theard.
now I'm able to get into my phone but i have no signal from my network operator at all.
i tried to flash a kdz via download mode and it won't work it says in the LGM support tools that my phone has the latest version and won't let me upgrade it.
i can't flash to another ROM because there's no costume rec for KK just yet.
what do i do?

Ezaries said:
So i've flashed OptimusRs's rom yesterday and i made a mistake by not flashing it with the costume recovery he gave on his theard.
now I'm able to get into my phone but i have no signal from my network operator at all.
i tried to flash a kdz via download mode and it won't work it says in the LGM support tools that my phone has the latest version and won't let me upgrade it.
i can't flash to another ROM because there's no costume rec for KK just yet.
what do i do?
Click to expand...
Click to collapse
have you tried the offline method to flash kdz because lg made it so there tool will not let you downgrade while connected to internet

XxZombiePikachu said:
have you tried the offline method to flash kdz because lg made it so there tool will not let you downgrade while connected to internet
Click to expand...
Click to collapse
Thanks for you reply.
Could you provide me an updated link for a guide or something?

Ezaries said:
Thanks for you reply.
Could you provide me an updated link for a guide or something?
Click to expand...
Click to collapse
here it is http://forum.xda-developers.com/showthread.php?t=2432476 it was updated yesterday if I am correct also this one has videos incase you run into trouble http://forum.xda-developers.com/showthread.php?t=2625044

XxZombiePikachu said:
here it is http://forum.xda-developers.com/showthread.php?t=2432476 it was updated yesterday if I am correct also this one has videos incase you run into trouble http://forum.xda-developers.com/showthread.php?t=2625044
Click to expand...
Click to collapse
Thanks, I'll try to use it and post if anything goes wrong :fingers-crossed:

Ezaries said:
Thanks, I'll try to use it and post if anything goes wrong :fingers-crossed:
Click to expand...
Click to collapse
good luck :good:

XxZombiePikachu said:
good luck :good:
Click to expand...
Click to collapse
Well.. i get this warning messege when ever i try to run "Automatic Offline Procedure" :
Windows Script Host
the system cannot find the file specified
code 80070002
source (null)
btw i think LG running some kind of maintance right now so i can't access the LG support tool thingy

Ezaries said:
Well.. i get this warning messege when ever i try to run "Automatic Offline Procedure" :
Windows Script Host
the system cannot find the file specified
code 80070002
source (null)
btw i think LG running some kind of maintance right now so i can't access the LG support tool thingy
Click to expand...
Click to collapse
Did u tried run as Admin?
Sent from my LG-D802 using XDA Premium 4 mobile app

basti2909 said:
Did u tried run as Admin?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I can't run it as admin cause it won't let me the option to...
oh god.. it's driving me crazy ><" anyone know a possible solution for my problem?
or how to remove my android completly so i can install the kdz cause it won't let me do that with 4.4.2

Ezaries said:
I can't run it as admin cause it won't let me the option to...
oh god.. it's driving me crazy ><" anyone know a possible solution for my problem?
or how to remove my android completly so i can install the kdz cause it won't let me do that with 4.4.2
Click to expand...
Click to collapse
In the guide in the link provided use method 2;
"Method 2. edit host file
thanks @Hid3rs
1. Go to windows/system32/drivers/etc/ and open your hosts file! (open it with wordpad)
2 . Add this line at the end of the document:
127.0.0.1 csmg.lgmobile.com
3. Save hosts file
4. Install msxml (you can find it in the downloaded KDZ_FW_UPD_EN folder)
5. Start http in the shttps folder
6. Start Windows Enabler and turn it on (system tray!)
7. Start UpTestEX_mod2_marwin
8. Flash your .kdz as you normally would"
This is what I did to help not running as admin when I ran into that problem.

jbaggs said:
In the guide in the link provided use method 2;
"Method 2. edit host file
thanks @Hid3rs
1. Go to windows/system32/drivers/etc/ and open your hosts file! (open it with wordpad)
2 . Add this line at the end of the document:
127.0.0.1 csmg.lgmobile.com
3. Save hosts file
4. Install msxml (you can find it in the downloaded KDZ_FW_UPD_EN folder)
5. Start http in the shttps folder
6. Start Windows Enabler and turn it on (system tray!)
7. Start UpTestEX_mod2_marwin
8. Flash your .kdz as you normally would"
This is what I did to help not running as admin when I ran into that problem.
Click to expand...
Click to collapse
I've tried this method after i failed with the first one, i turned my network off and it keep telling me i need a network in order to use lgms tool
and when my network is on it keep open the lgms tool and tells me that my phone is up to date and nothing else happens i mean it doesn't open the "select country and langauage" window.

Ezaries said:
I've tried this method after i failed with the first one, i turned my network off and it keep telling me i need a network in order to use lgms tool
and when my network is on it keep open the lgms tool and tells me that my phone is up to date and nothing else happens i mean it doesn't open the "select country and langauage" window.
Click to expand...
Click to collapse
What is the version you have for LG Mobile Support Tool?
To go back to stock, open LG Mobile Support Tool and from tools/options select Update Recovery.

abo_mara7 said:
What is the version you have for LG Mobile Support Tool?
To go back to stock, open LG Mobile Support Tool and from tools/options select Update Recovery.
Click to expand...
Click to collapse
I'll try to use the Update Recovery thing.. my LGMS TOOL version is the one that they provided in the guide.

Ezaries said:
I'll try to use the Update Recovery thing.. my LGMS TOOL version is the one that they provided in the guide.
Click to expand...
Click to collapse
Open the tool then go to Help > About and give me the version number.

abo_mara7 said:
Open the tool then go to Help > About and give me the version number.
Click to expand...
Click to collapse
the version is 1.7.1.0, is there any problem with the version?

Ezaries said:
the version is 1.7.1.0, is there any problem with the version?
Click to expand...
Click to collapse
I have version 1.6.9.0 running on my sister's laptop and it works, while on mine it is the same as your's so probably the problem is because of this new release. I can't seem to find a way to go back.

abo_mara7 said:
I have version 1.6.9.0 running on my sister's laptop and it works, while on mine it is the same as your's so probably the problem is because of this new release. I can't seem to find a way to go back.
Click to expand...
Click to collapse
Thanks alot for your help but somehow i was able to run the Automatic Offline Procedure O_O
my phone is finally restored and working
The theard can be closed, thanks.

Ezaries said:
Thanks alot for your help but somehow i was able to run the Automatic Offline Procedure O_O
my phone is finally restored and working
The theard can be closed, thanks.
Click to expand...
Click to collapse
If you could mention what fixed it you would help a lot as many have this issue..

abo_mara7 said:
If you could mention what fixed it you would help a lot as many have this issue..
Click to expand...
Click to collapse
I really don't know.. i remember that i've opened it with the error and after 1hour i tried again and it worked.

Successfully unlock band for Z1

Hey guys, after many days of experiment, brick, sideloading and many more I have successfully unlocking band for our Z1. Currently I only tested with C6902(unlock all utms/wcdma band), dont know will it works on LTE version(unlock all band, include LTE and UTMS). But I will borrow that from some of my friends:good::good::good:
Unlocking guide will be post later

BlackSoulxxx said:
Hey guys, after many days of experiment, brick, sideloading and many more I have successfully unlocking band for our Z1. Currently I only tested with C6902(unlock all utms/wcdma band), dont know will it works on LTE version(unlock all band, include LTE and UTMS). But I will borrow that from some of my friends:good::good::good:
Unlocking guide will be post later
Click to expand...
Click to collapse
I'm not sure how's that possible, but how have you did that anyway?

olokos said:
I'm not sure how's that possible, but how have you did that anyway?
Click to expand...
Click to collapse
Using multiple software, calculation and some documents:highfive::highfive
This open a new era for us. So when u buy some phone, you no longer have to choose several variant with band. All thing now are unlockable :v Just require root

BlackSoulxxx said:
Using multiple software, calculation and some documents:highfive::highfive
This open a new era for us. So when u buy some phone, you no longer have to choose several variant with band. All thing now are unlockable :v Just require root
Click to expand...
Click to collapse
Well, I wanted you to write down some kind of a guide or at least an explanation how's that possible. I thought that other radios just don't exist physically.

olokos said:
Well, I wanted you to write down some kind of a guide or at least an explanation how's that possible. I thought that other radios just don't exist physically.
Click to expand...
Click to collapse
Well, Sony use the same MDM9615 modem + MSM8974 for all 4g LTE variant.For 6902 they only use older modem+MSM8274 (it's a downgrade version of 8974 without LTE modem support). Sony only lock the band in baseband.

BlackSoulxxx said:
Well, Sony use the same MDM9615 modem + MSM8974 for all 4g LTE variant.For 6902 they only use older modem+MSM8274 (it's a downgrade version of 8974 without LTE modem support). Sony only lock the band in baseband.
Click to expand...
Click to collapse
May I ask you how did you manage to do this? I'd really would like to try it myself

olokos said:
May I ask you how did you manage to do this? I'd really would like to try it myself
Click to expand...
Click to collapse
Confirm it works on Z Ultra And ZR. But no LTE Z1 to test it
Sure. But I'm developing the method for the guide
I will throw some pic too (for tutorial things )
1.Install QPST first
2.Download HTCDiagDriver
3. Unzip HTCDiagDriver, open htcdiag.inf
Change this from
%OEMDevice02% = OEMPort02, USB\VID_0BB4&PID_0C07&MI_04
Click to expand...
Click to collapse
to this
%OEMDevice02% = OEMPort02, USB\VID_0FCE&PID_5146&MI_04
Click to expand...
Click to collapse
Save the file
Use your phone and enter this *#*#8778*#*#
4.Now connect your phone, make sure usb debug on and connect into mtp, open adb and type this
adb shell
su
setprop persist.usb.eng.1
Click to expand...
Click to collapse
5.Now turn off usb debug ,disconnect your phone, wait for about 10s and connect to pc again
6. Now you will see your pc will be install driver for debug sony mode. Just wait until it say cant install driver. Now you use "Have disk" method to install htcdiagdriver (There are several devices like "C6902", just watch hardware ids of them and choose "MI_04"and install driver.)
7. After install driver, open QPST -> QPST Configuration using start menu button (Must do, otherwise you will stuck, IDK why this but just do that)
8. After open QPST Con, switch to Ports tab, press Add new port, untick "Show Serial and USB......." and press OK
9.Now in port tab you will see COMx port that show MSM8974:victory::victory:
10.Open QPST install directory -> bin-> RV_NV_Manager.exe
11. After open that, click setting -> Comport. Choose your phone COM port
12. Now press file-> Read from phone. It will load slowly, be calm now:angel::angel:
13. After it load done, scroll to 1877 section, click on that. Paste the decimal number here and I will continue the guide
Pls backup nandroid first and prepare full ftf incase it wont start again

@olokos
Bad news guys, after found out how to unlock baseband, my phone start to behave like corrupted baseband (and other phone I test this mod too, same behavior). So my research will be continue and the guide I will post later. If anyone mod walk around here, pls close this thread. In future I will post the guide with complete bug-free procedure
Tks all

Thread closed at OP request

No IMEI/WIFI/BASEBAND? This is your thread.

Mod edit: OP removed

I don't have this problem, but am sure tons of users would surely find this extensive guide useful! Much Appreciated Mate!

Thank you
Very well written, amazing work, thank you for mentioning me too.. For all who lost their imei's, feel free to ask anything about that matter, we have more methods to recover it.

@rombdeta
I think you should post a link to the original thread on htcmania

Thanks
Thanks everybody helped for this tutorial.You are just great
I have done what inside the tutorial,my problem is i have only 3g,so it goes to :
-Have imei but radio off and you can't change 3G to 2G or LTE, it's always in 3G. Put the QCN again, and only click in WRITE NV.
Where to put the qcn again? I presume rf nv manager ,right?
Thanks again ,you are life saver

maskelisuvari said:
Thanks everybody helped for this tutorial.You are just great
I have done what inside the tutorial,my problem is i have only 3g,so it goes to :
-Have imei but radio off and you can't change 3G to 2G or LTE, it's always in 3G. Put the QCN again, and only click in WRITE NV.
Where to put the qcn again? I presume rf nv manager ,right?
Thanks again ,you are life saver
Click to expand...
Click to collapse
Yes right, but first do a full backup with QPST, then, yes put my QCN in RF NV Manager, wait you will see "the program can't resset your phone" or something like that, power off your device, and power on. You will see your connections.

waterdaan said:
@rombdeta
I think you should post a link to the original thread on htcmania
Click to expand...
Click to collapse
It's a guide based in the guide of ElHechizero, but in htcmania, the guide is with a EFS backup. I make my guide with a virgin QCN. It really different. Sorry about my english

rombdeta said:
It's a guide based in the guide of ElHechizero, but in htcmania, the guide is with a EFS backup. I make my guide with a virgin QCN. It really different. Sorry about my english
Click to expand...
Click to collapse
Sorry for that,
I thought it was the same

rombdeta said:
Yes right, but first do a full backup with QPST, then, yes put my QCN in RF NV Manager, wait you will see "the program can't resset your phone" or something like that, power off your device, and power on. You will see your connections.
Click to expand...
Click to collapse
I think the qcn is not original ,its edited .Because once i check the imei, it belongs to Samsung Mobile.Maybe thats the problem.
I go trough the guide.I have the imei (Samsung Mobile) and 3g but not 2g.Then i write my original imei,i have imei,3g and baseband but no 2g..Then i have full backup of my qcn by qpts.I open Rf NV Manager and put your qcn,then what?Because nothing happens.Pls help.

RF NV Manager
@rombdeta
Could you pls explain to me the steps after put the qcn to RF NV Manager?
When i press put the qcn into rf nv manager , there is no nv items.I chose read supported rf nv items and go to 550 enter my imei,click write nv,write only listed nv items to qcn ,its okay.But once to restore the qcn with qpts there is no imei ,baseband,no signal,nothing.
I appreciated your help.

I am getting this error when I tried to restore the qcn file.
View attachment 3258412

Zeero1778 said:
I am getting this error when I tried to restore the qcn file.
View attachment 3258412
Click to expand...
Click to collapse
No need to save the QCN, because that remove some of the QCN package, so you only have to click on "Write NV". Rewrite the QCN package, and do as I tell you, if you can't repair your device, send me a message and I'll help via TeamViewer. Greetings.

Hi @rombdeta, I followed the procedure to restore my IMEI code, but when I click on "settings > comport" the "RF_NV_Manager.exe" crash.. What can I do? Where's the problem?

Try with other PC

I really need help. Gone to CM11 version as specified done the adb shell. Now trying to config a COM Port. I don't know which COM Port is mine? I've got the A001 showing once in other devices with a ? and i have an android device stated as ADB shell in another.
I'm really confused. Please help

Thank god
Figured it out. Might i suggest a re-write?
Very much appreciated though!!

rombdeta said:
IF YOU HAVE A 32 bits operating system, you will see two A0001 in devices manager
click in the first, and install like the images 1 to 10.And when you open QPST, use the port who is in my case COM3.
Click to expand...
Click to collapse
@rombdeta sorry if I annoy you, but I want to ask why I do not have "images 1 to 10", and how I know what COM port is my device? (In "ports (COM and LPT)" in device manager I've only "communication port (COM1)" and "printer port (LPT1)")

Amboh said:
@rombdeta sorry if I annoy you, but I want to ask why I do not have "images 1 to 10", and how I know what COM port is my device? (In "ports (COM and LPT)" in device manager I've only "communication port (COM1)" and "printer port (LPT1)")
Click to expand...
Click to collapse
Because i forget my images in the package lol.
https://mega.co.nz/#!1l1SVI4I!XMhSsiaa9YnJ7ZiRMxcDAxmEuf4sGXVGzxDV2P7ivt4

rombdeta said:
Because i forget my images in the package lol.
https://mega.co.nz/#!1l1SVI4I!XMhSsiaa9YnJ7ZiRMxcDAxmEuf4sGXVGzxDV2P7ivt4
Click to expand...
Click to collapse
Thank you, thank you, thank you!
Now I have my IMEI and my SIM just works fine. But I have a problem, to connect to a mobile networks the phone takes more than one minute, and I have to search the networks by myself.
EDIT: I noticed that 3G works (connected in 40/50 seconds, I think it's a bit slow) but the phone can't connect to 2G, with LTE didn't tried becouse at home I don't have it.

Received an invalid command from the phone.
what can i do after i press start it gives me this error " Received an invalid command from the phone.
"

Anyone can backup firmware from TA-1003 ?

Please any make firmware backup from TA-1003 .so that we can flash it to TA-1000 .
Thanks

rian.w25 said:
Please any make firmware backup from TA-1003 .so that we can flash it to TA-1000 .
Thanks
Click to expand...
Click to collapse
I dont think its that easy

surya467 said:
I dont think its that easy
Click to expand...
Click to collapse
are using TA_1000 ?

rian.w25 said:
are using TA_1000 ?
Click to expand...
Click to collapse
Yes I have a TA-1000

surya467 said:
Yes I have a TA-1000
Click to expand...
Click to collapse
Are you from india ?

rian.w25 said:
Are you from india ?
Click to expand...
Click to collapse
yes

surya467 said:
yes
Click to expand...
Click to collapse
Great anyone can backup via adb

I am using Nokia 6 ( TA-1000 ) if need any help let me know please i also want to install Google play

rian.w25 said:
Great anyone can backup via adb
Click to expand...
Click to collapse
Will try that.

I've a TA-1003 with international ROM and Playstore. How do I create a flashable backup via ADB?

5T33Z0 said:
I've a TA-1003 with international ROM and Playstore. How do I create a flashable backup via ADB?
Click to expand...
Click to collapse
here is the info, please try it. May be that image can be used to update from "dload" folder on TA-1000, who knows !!
https://www.howtogeek.com/125375/ho...kup-without-rooting-or-unlocking-your-device/

kanakarkku said:
here is the info, please try it. May be that image can be used to update from "dload" folder on TA-1000, who knows !!
https://www.howtogeek.com/125375/ho...kup-without-rooting-or-unlocking-your-device/
Click to expand...
Click to collapse
Thanks for the info. Yesterday, I hooked the Phone up to my PC and installed the USB Driver, but strangely it is only recognized as an ADB Device if I select "ADB sideload" from the Recovery. But in Bootloader/Download Mode it does not show up if I enter "ADB Devices". All my other devices work fine with ADB, though. Had a look at the device manager and everything looks fine. I don't know how to fix this.

5T33Z0 said:
Thanks for the info. Yesterday, I hooked the Phone up to my PC and installed the USB Driver, but strangely it is only recognized as an ADB Device if I select "ADB sideload" from the Recovery. But in Bootloader/Download Mode it does not show up if I enter "ADB Devices". All my other devices work fine with ADB, though. Had a look at the device manager and everything looks fine. I don't know how to fix this.
Click to expand...
Click to collapse
I guess you need to unlock something under developer settings . You know what I mean

OEM unlock is enabled, as well as USB Debugging.

5T33Z0 said:
OEM unlock is enabled, as well as USB Debugging.
Click to expand...
Click to collapse
Keep connected to the pc and please restart your mobile.
Also try to force start it. I'm not understanding why you can't sideload adb? Could be that it's not rooted?

ADB works in Sideload, but not in Download Mode. In Device Manger another Android Device pops up after entering download mode. I dont have a Driver for that. Hmmm. Where can I find it?

5T33Z0 said:
ADB works in Sideload, but not in Download Mode. In Device Manger another Android Device pops up after entering download mode. I dont have a Driver for that. Hmmm. Where can I find it?
Click to expand...
Click to collapse
There are certain adb drivers that can be installed manually. The name usually supplied in/with the same folder. If you don't find send me your email address I think I have them somewhere

kanakarkku said:
here is the info, please try it. May be that image can be used to update from "dload" folder on TA-1000, who knows !!
https://www.howtogeek.com/125375/ho...kup-without-rooting-or-unlocking-your-device/
Click to expand...
Click to collapse
if the device were not rooted, then , you can only backup the installed stuff. cannot backup system data except rooted.

zorrol said:
if the device were not rooted, then , you can only backup the installed stuff. cannot backup system data except rooted.
Click to expand...
Click to collapse
Sounds logical. My idea behind my statement was, as "everything" is same on both TA-1000 & TA-1003 (except Google related restrictions on ta-1000), I was thinking just to replace "all" data on TA-1000. I don't know if the internal memory on mobile is able to notice anything??
With your statement I'm just thinking, what happens if I get some system "backup" file from ta-1003, and restore it on ta-1000?? Sounds stupid??

surya467 said:
I dont think its that easy
Click to expand...
Click to collapse
Hi bro i have ta 1003 in hand.