Successfully unlock band for Z1 - Xperia Z1 General

Hey guys, after many days of experiment, brick, sideloading and many more I have successfully unlocking band for our Z1. Currently I only tested with C6902(unlock all utms/wcdma band), dont know will it works on LTE version(unlock all band, include LTE and UTMS). But I will borrow that from some of my friends:good::good::good:
Unlocking guide will be post later

BlackSoulxxx said:
Hey guys, after many days of experiment, brick, sideloading and many more I have successfully unlocking band for our Z1. Currently I only tested with C6902(unlock all utms/wcdma band), dont know will it works on LTE version(unlock all band, include LTE and UTMS). But I will borrow that from some of my friends:good::good::good:
Unlocking guide will be post later
Click to expand...
Click to collapse
I'm not sure how's that possible, but how have you did that anyway?

olokos said:
I'm not sure how's that possible, but how have you did that anyway?
Click to expand...
Click to collapse
Using multiple software, calculation and some documents:highfive::highfive
This open a new era for us. So when u buy some phone, you no longer have to choose several variant with band. All thing now are unlockable :v Just require root

BlackSoulxxx said:
Using multiple software, calculation and some documents:highfive::highfive
This open a new era for us. So when u buy some phone, you no longer have to choose several variant with band. All thing now are unlockable :v Just require root
Click to expand...
Click to collapse
Well, I wanted you to write down some kind of a guide or at least an explanation how's that possible. I thought that other radios just don't exist physically.

olokos said:
Well, I wanted you to write down some kind of a guide or at least an explanation how's that possible. I thought that other radios just don't exist physically.
Click to expand...
Click to collapse
Well, Sony use the same MDM9615 modem + MSM8974 for all 4g LTE variant.For 6902 they only use older modem+MSM8274 (it's a downgrade version of 8974 without LTE modem support). Sony only lock the band in baseband.

BlackSoulxxx said:
Well, Sony use the same MDM9615 modem + MSM8974 for all 4g LTE variant.For 6902 they only use older modem+MSM8274 (it's a downgrade version of 8974 without LTE modem support). Sony only lock the band in baseband.
Click to expand...
Click to collapse
May I ask you how did you manage to do this? I'd really would like to try it myself

olokos said:
May I ask you how did you manage to do this? I'd really would like to try it myself
Click to expand...
Click to collapse
Confirm it works on Z Ultra And ZR. But no LTE Z1 to test it
Sure. But I'm developing the method for the guide
I will throw some pic too (for tutorial things )
1.Install QPST first
2.Download HTCDiagDriver
3. Unzip HTCDiagDriver, open htcdiag.inf
Change this from
%OEMDevice02% = OEMPort02, USB\VID_0BB4&PID_0C07&MI_04
Click to expand...
Click to collapse
to this
%OEMDevice02% = OEMPort02, USB\VID_0FCE&PID_5146&MI_04
Click to expand...
Click to collapse
Save the file
Use your phone and enter this *#*#8778*#*#
4.Now connect your phone, make sure usb debug on and connect into mtp, open adb and type this
adb shell
su
setprop persist.usb.eng.1
Click to expand...
Click to collapse
5.Now turn off usb debug ,disconnect your phone, wait for about 10s and connect to pc again
6. Now you will see your pc will be install driver for debug sony mode. Just wait until it say cant install driver. Now you use "Have disk" method to install htcdiagdriver (There are several devices like "C6902", just watch hardware ids of them and choose "MI_04"and install driver.)
7. After install driver, open QPST -> QPST Configuration using start menu button (Must do, otherwise you will stuck, IDK why this but just do that)
8. After open QPST Con, switch to Ports tab, press Add new port, untick "Show Serial and USB......." and press OK
9.Now in port tab you will see COMx port that show MSM8974:victory::victory:
10.Open QPST install directory -> bin-> RV_NV_Manager.exe
11. After open that, click setting -> Comport. Choose your phone COM port
12. Now press file-> Read from phone. It will load slowly, be calm now:angel::angel:
13. After it load done, scroll to 1877 section, click on that. Paste the decimal number here and I will continue the guide
Pls backup nandroid first and prepare full ftf incase it wont start again

@olokos
Bad news guys, after found out how to unlock baseband, my phone start to behave like corrupted baseband (and other phone I test this mod too, same behavior). So my research will be continue and the guide I will post later. If anyone mod walk around here, pls close this thread. In future I will post the guide with complete bug-free procedure
Tks all

Thread closed at OP request

Related

[GUIDE] Galaxy Tab Network Unlock

**UPDATE**
This method causes your serial number to change to 00000000 (which isn't a problem as such as this isn't currently used for anything) but there is a new method which involves directly hex editing the nv_data.bin file, which may be faster and does not change your serial number. You can find the details here: http://forum.xda-developers.com/showthread.php?t=843323.
**UPDATE**
First up I'll say that I'm not incredibly familiar with Galaxy S firmware changes/modding, and this mostly builds on work done in these areas, so not all these steps may be necessary but they worked for me. If someone can suggest a faster way to do this/unnecessary steps then please go ahead and reply with them!
This unlocked my Network Locked Australian Galaxy Tab and so I assume should work for others.
You should back up your /efs/ folder before you proceed as you may need this to undo if something goes wrong.
*I take no responsibility if something goes wrong!*
Requirements:
Root access
repair_nv_data.zip (from http://forum.xda-developers.com/showpost.php?p=8942669&postcount=94)
Java
Busybox
The Android SDK for ADB, Root Explorer or some similar file system explorer/editor
(If you have US firmware with no Phone software, you may need to flash European firmware as described here: http://forum.xda-developers.com/showthread.php?t=838250 ).
Firstly, on your phone dial *#7465625# and check if the Network Lock is set to [ON], if so then your phone is locked (duh), so continue.
1. Use Superoneclick (http://forum.xda-developers.com/showthread.php?t=812367) to root your phone (the other z4root method may work as well, but this isn't what I used).
2. Either use ADB or some other method to rename or delete (backup first):
/efs/nv_data.bin.md5
/efs/.nv_data.bak
/efs/.nv_data.bak.md5
(I just used Root Explorer to rename them to something else).
3. Restart your phone and then go into the /efs/ directory and see if the 'nv_data.bin.md5' file has been re-created by your phone, as long as it has been created then you can proceed.
4. Go to http://forum.xda-developers.com/showpost.php?p=8942669&postcount=94 and download the repair_nv_data.zip file (the credit for all of this mostly goes to that thread and helroz).
5. Install 'busybox' from the Market. Once you install it, you actually have to run it and properly install it (the Market app is basically an installer) - the files in the above zip have a dependency on this.
6. Extract the above zip to your PC, plug in your Tab in USB debugging mode. Run the Step 2.bat from the extracted file. You may need to allow the script super user access several times. This should copy the /efs/ and a bunch of files into a directory with a french name.
7. Run the Reparation_nv_data.jar file. (You will need Java for this step.) It will prompt you to enter two numbers, which are your pseudo-unlock codes. I entered '11111111' and '11111111' (eight 1's) both times. This rewrites the nv_data.bin file to be simunlocked with these details.
8. Run the Step 4.bat. Your superuser app (the one installed when you rooted using SuperOneClick) will need you to allow each command to have root access so keep an eye on your Tab. You may need to press y/n a few times if you encounter errors. This is uploading the edited nv_data.bin onto your Tab.
This batch file will stop several times and need you to hit a key when it pauses. My Tab rebooted halfway through this batch file - when it did this I waited for it to fully reboot back to the lock screen before pressing a key to make the script continued while the Tab was actually able to respond to its commands.
9. Towards the end of its execution it rebooted a second time. It paused during loading up and had some yellow writing on the screen saying it was updating media (I assume it was rebuilding the nv_data.bin). Leave it for a minute and it will prompt you to reboot/some other options. Just press whatever it wants (home I think) to reboot the phone - you don't want any of the other recovery options.
10. Go into your dialer and put in *#7465625# again and (hopefully) voila! Your phone should no longer be network locked. Try a SIM from a different provider to make sure.
Enjoy!
Edit: I had to go out and actually buy a prepaid SIM to confirm that all was working with a different provider. Attached are screen caps of my Tab on two different networks, as well as the network status screen, making/receiving calls etc. all works on both.
Awesome man, thanks.
This is much better than the 2 month wait we had for Galaxy S unlocking.
Hello, I'm french and i use your post to unlock my Galaxy TAB SFR ''réunion island'' and she is unlock thanks for your AMAZING post for unlock TAB
Ps: For unlock my TAB by SFR REUNION, he tell me 150 Euros.... Vive smithdc & helroz
Works well! I had little trouble running java on windows7. But changing compatibility mode to windowsxp sp3 and check run this program as an administrator solved the problem.
Thanks for easy guide!
tacoda, you mean for running the .jar file? or for installing Java itself? (I assume the former).
Sweeet thx , curious if unlocking the AT&T version has hardware only set to AT&Ts 3G frequencies, so 3g wont work on tmobile or is it capable of running 3g on tmobile with a unlocked AT&T tab?
smithdc said:
tacoda, you mean for running the .jar file? or for installing Java itself? (I assume the former).
Click to expand...
Click to collapse
Running the jar file. I didnt know how to run it.
Sent from my SGH-T959 using XDA App
Does the sim card and/or sd card should or should not be plugged in during the unlocking progress?
It shouldn't make a difference Zeron.Wong.
jay_jay_n said:
Sweeet thx , curious if unlocking the AT&T version has hardware only set to AT&Ts 3G frequencies, so 3g wont work on tmobile or is it capable of running 3g on tmobile with a unlocked AT&T tab?
Click to expand...
Click to collapse
Traditionally, AT&T and T-Mobile hardware used different radios, it was more than just firmware. That's also true on the little brother Galaxy S series, the Vibrant has a different radio than the Captivate (though the Vibrant radio DOES have 1900 band in the hardware, for some reason).
Kudos to smithdc for this awesome guide! I saved a lot of money thanks to him. Congrats again.
Bump, is there any way to sticky/pin this for people?
So your saying if I use this method and install my tmous unlimited sim I can get calls and 3g or do I need a prepaid sim
I'm not sure on how T-Mobile are blocking, but if it IS my IMEI then you would have to use a SIM from a different network.
If they are blocking your IMEI on their network, then you would have to use a SIM from a different network (as a different network, wouldn't be blocking this IMEI number). Changing it to a different SIM on the same network won't help as your IMEI is for the device itself.
I just want to clarify something..
I have a T Mobile Tab and want to use a SIM I have for ATT.
Will I have to flash my device with the EU firmware first in order to get the phone software on it..then do the rest of the unlocking steps?
Assuming thats correct..after unlocking it I then can put my ATT sim card in and it should work for calls and data (Edge only) with not having to tweak any setting at all? Or do I have to set up my wap.cingular connections for the data like on a WM phone on ATT?
And if I want to get back to original out-of-the-box firmware from T Mobile (like if I had to send it in for repair) I just have to flash stock T Mobile firmware and its back completely to original?
Thanks..and wow am I loving this TAB !!!
You'll need to set up your APN data for AT&T, yes.
Thanks for the fast reply. As for the flashing of the EU rom..is that the only/best way so far in order for me T Mobile Tab to get the radio software on it. I was thinking I saw an APK for the radio software someplace but did not know what way was better.
I just want to be 100% sure bfr I take the jump to unlocking and playing with the phone part
thanks
I got a quick couple of questions:
1. If I restore original firmware (Canadian), does it relock my phone?
2. Where can I get the Canadian firmware release? I see EURO and US, but no Canadian.
I read on one of the other threads that sim unlock method also changes your imei number. Is this really case?
clubtech said:
I read on one of the other threads that sim unlock method also changes your imei number. Is this really case?
Click to expand...
Click to collapse
Yes, it will set your IMEI to a bogus one that will get your T-Mobile internet access disabled after 1/2 hour.

[Q] Internet sharing on Focus without unlock-interop

Hello,
I know that you can hack the Focus to get the Internet sharing but I saw that the Omnia will have an update to get it. Can we exepct the Focus to have the same kind of udpdate since they are very similar?
I have a Samsung Focus v1.2 when I got to the diag. menu. (HW VERSION: REV 1.2)
tewmgd said:
Hello,
I know that you can hack the Focus to get the Internet sharing but I saw that the Omnia will have an update to get it. Can we exepct the Focus to have the same kind of udpdate since they are very similar?
I have a Samsung Focus v1.2 when I got to the diag. menu. (HW VERSION: REV 1.2)
Click to expand...
Click to collapse
No, I wouldn't expect that. AT&T announced Internet Sharing only for Focus S/Flash, both Gen2 phones. And they've hunted down any Gen1 user that has Internet Sharing enabled on their WP7 phone. And I doubt they're going to turn 180*.
Interesting! I don't think I've heard of a HW 1.2 revision so far!!! We had 1.0, 1.3 and 1.4, at least that's what I know. Are you on Mango?
Yes, to be exact I got: HW VERSION: REV 1.2 and FTA HW VERSION: REV 1.3
As long as your device is unlocked in some way (Developer/Chevron/Other) you can get internet sharing on your Samsung phone.
1.) First install the WP Dev Tools and unlock your Samsung phone.
2.) Use the Application Deployment tool to send THIS to your phone. You do not need to run it and you can delete it after it has been deployed.
3.) Install the Diagnosis app by typing ##634#
4.) After the Diagnosis app starts type *#9908# and select 'System Tweaks' press 'Save' then 'Close' and restart your phone.
5.) Your phone now has internet sharing and as a bonus is interop unlocked!
PS: You need to have a recent firmware on your phone or your diagnosis app and drivers will not be new enough to work.
EDIT: I built the file depoyer app using the tools provided by Heathcliff74 so many thanks to him! Also ADC is built in as well so no need to worry about that and I also upped the max number of connections from 3 to 5 devices.
Wow! Thank you, it works perfectly
What can I do if my firmware appears to be out of date (I get Diagnosis rev. 0929)?
Entegy said:
What can I do if my firmware appears to be out of date (I get Diagnosis rev. 0929)?
Click to expand...
Click to collapse
I'd actually like to know how to update the firmware on the Canadian Focus as well.
Entegy said:
What can I do if my firmware appears to be out of date (I get Diagnosis rev. 0929)?
Click to expand...
Click to collapse
Uninstall it (press and hold) and run it again from Dialer, you should get the new one, if your OS is updated.
this method worked great. i got my 1.3 focus to finally have wireless tethering. welcome to the new age windows phone
I am new to Windows phone. I purchased a used Samsung Focus. It was locked to AT&T. OS-version 7.10.7720.68 , Firmware: 2103.11.8.1 , Hardware revision: 3.1.0.7, Radio Software: 2103.11.8.1 , Radio Hardware: 0.0.0.3, BOOTloader: 5.8.0.2 , CHIP SOC version: 0.36.2.0
So, I purchased sim-unlock code and inserted T-mobile sim-card. It works fine. But I read that AT&T has disabled many Mango features. I would like to enable them. For example: I'd like to enable "internet sharing" or making my phone a personal wifi hotspot. I followed the steps but didn't get it to work. Here is my response to each step:
1.) First install the WP Dev Tools and unlock your Samsung phone.
Click to expand...
Click to collapse
my phone is already unlocked as I can use T-mobile sim card. No idea what is WP Dev Tools (?) and what to do with it if phone is already unlocked
2.) Use the Application Deployment tool to send THIS to your phone. You do not need to run it and you can delete it after it has been deployed.
Click to expand...
Click to collapse
what application deployment tool?
3.) Install the Diagnosis app by typing ##634#
Click to expand...
Click to collapse
I did this and Diagnosis app is showing-up. ver.0103)
4.) After the Diagnosis app starts type *#9908# and select 'System Tweaks' press 'Save' then 'Close' and restart your phone.
Click to expand...
Click to collapse
when I do this, all I see is "GPRS MANAGER"
and then a drop-down "Select GPRS"
-> Gumi Test Bed
-> Suwon2g Test Bed
-> Suwon3g Test Bed
(I don't see option to select "System Tweaks")
5.) Your phone now has internet sharing and as a bonus is interop unlocked!
Click to expand...
Click to collapse
No, it doesn't
http://forum.xda-developers.com/forumdisplay.php?f=606 your gonna need to do some research
Sim-Unlocked isnt the same thing as Dev-Unlocked , all the info you need is in the aforementioned forum , get reading!
I know this is an older thread, but I just wanted to thank you for the excellent write up. Up until today I haven't had a need to tether anything to my phone, but after grabbing an MS Surface, I suddenly found a need for it.
I followed your simple directions, and now I have internet sharing in my settings. Excellent!
Are you on AT&T? Unless you pay for the ability to share, you might want to keep the share to a minimum, or they will add the feature to your bill for you.
redred1 said:
my phone is already unlocked as I can use T-mobile sim card. No idea what is WP Dev Tools (?) and what to do with it if phone is already unlocked
Click to expand...
Click to collapse
By Unlock, he doesn't mean Carrier Unlock, he means "rooting".
redred1 said:
what application deployment tool?
Click to expand...
Click to collapse
Install Windows Phone SDK, it'll install an application deployment tool to install XAPs onto your unlocked phone.
redred1 said:
I did this and Diagnosis app is showing-up. ver.0103)
Click to expand...
Click to collapse
Uninstall the diagnosis app and repeat this step after doing the above.
redred1 said:
when I do this, all I see is "GPRS MANAGER"
and then a drop-down "Select GPRS"
-> Gumi Test Bed
-> Suwon2g Test Bed
-> Suwon3g Test Bed
(I don't see option to select "System Tweaks")
No, it doesn't
Click to expand...
Click to collapse
Well, if you didn't do over half the steps mentioned above, you can't expect to have it. Those steps aren't there just to make things more complex, they serve a purpose
Good luck

[Guide] Update any Motorola Charm to lates T-Mobile firmware (Working 2G / 3G)

Hey Guys,
The Admins decided to basically add the Charm forums into the Flipout forums, so far only the main forum heading has been changed, hopefully the admins will do the rest of the changes soon.
In the meanwhile, i thought it would be useful to post useful threads on the charm porting, basically since flipout and charm are the same phone with a different design, these should be applicable with respective changes to flipout also.
[Guide] Update any Motorola Charm to lates T-Mobile firmware (Working 2G / 3G)
Author : victory144
Thread : http://forum.xda-developers.com/showthread.php?t=1384837
Content :
victory144 said:
[URL="http://support.t-mobile.com/docs/DOC-1741"]List of improvements, from T-Mobile Documentation.
[/URL]
I AM NOT RESPONSIBLE FOR ANY DAMAGE THAT THIS GUIDE MAY CAUSE. TESTED AND WORKING. FOLLOW AT YOUR OWN RISK!
Warning: Flashing T-Mobile sbf will update the Bootloader, so cant downgrade or flash other sbf.
This guide is for update any Motorola Charm w/o brand to the latest T-Mobile update with fully working 2G/3G network, and get many improvements (Best of all Stability and Battery).
If you have official US T-Mobile Charm you don't need this. as it can be updated normally.
Requirements:
* Any sbf file that currently work (2G/3G) with the corresponding Mobile Providers Link.
* T-Mobile 03.90.7 BLUR firmware sbf file. Link from the Wiki.
* RSD Lite 4.6 Link from the Wiki.
* Moto Android Depacker Link.
* SuperOneClick for Root Internal link.
* Root explorer NO LINK! (Or via ADB).
Click to expand...
Click to collapse
Guide:
A- Backup from the running firmware.
1. Root the phone (any method).
2. Install Root Explorer (alternatively can use ADB or terminal emulator).
3. Backup this folder and save a copy in the computer. "etc\motorola\bp_nvm_default".
Click to expand...
Click to collapse
B- Extract BP from the sbf (That currently work with your 2g/3g network).
1. Open Motorola Android Depacker --> Open From File -->Browse the sbf
2. Click "Split To Folder" this will generate a folder with the same name of the sbf.
3. Remove all split files except this one "CG45.smg" (BP Firmware file).
Click to expand...
Click to collapse
C- Mod T-Mobile sbf.
1. Open Motorola Android Depacker --> Open From File -->Browse the sbf (T-Mobile one).
2. Click "Split To Folder" --> browse to the splitted folder.
3. Replace and overwrite the "CG45.smg" with the one from B.
4. Open Motorola Android Depacker --> "Open File Folder" --> Browse T-Mobile split folder.
5. Click on "Compile File" this will generate "firmware.sbf" with BP that work with the phone.
Click to expand...
Click to collapse
D- Install T-Mobile Mod sbf.
1. Backup any needed phone data.
2. Install and open RSD Lite --> Click on "..." --> Browse to "firmware.sbf"
3. Connect the phone to the computer.
4. Wait until phone show as connected in the RSD Lite--> click "Start".
5. Wait until RSD Lite finish. --> Configure "Moto blur" account.
Optional: It's possible to restore "clockworkmod" backup using polovinamozga's Bootstrapped Recovery.
http://forum.xda-developers.com/showpost.php?p=14796425&postcount=412
Click to expand...
Click to collapse
E- Restore network.
1. Root the phone (using SuperOneClick).
2. Install Root Explorer.
3. Copy this folder from step "A" to the SD Card "bp_nvm_default".
4. open Root Explorer --> Navigate to "sdcard" --> navigate to "bp_nvm_default" folder.
5. "Multi-select" these files:
File_Audio
File_Audio2
File_GSM
File_Seem_Flex_Tables
generic_pds_init
Click to expand...
Click to collapse
6. Then press "Copy" --> Navigate to "etc\motorola\bp_nvm_default" --> "Mount RW".
7. Paste --> Overwrite all the files.
8. IMPORTANT Select all copied files (from step E-5) and change permission to rw-r--r--.
9. Reboot phone...Then add the APN of the corresponding network provider.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Credit for all Tools Creator.
Sorry about any grammatical/spell English error.
Click to expand...
Click to collapse
Credits to the respective author and aforementioned credits.
Thanks for the clear guide. Had a lot of difficulty with this back a year or two ago when I first got my Charm.
Does anyone know if the T-Mo (1700/2100) and 850/1900/2100 Charms have any hardware differences? Or is the 3G bands support purely in software?
I'm actually wondering if it's possible to do the opposite of this guide. That is, flash my existing deblur SBF, but with the T-Mobile BP files, to convert my Telus Charm into one that works on T-Mobile/Wind/Mobilicity.
ergosteur said:
Thanks for the clear guide. Had a lot of difficulty with this back a year or two ago when I first got my Charm.
Does anyone know if the T-Mo (1700/2100) and 850/1900/2100 Charms have any hardware differences? Or is the 3G bands support purely in software?
I'm actually wondering if it's possible to do the opposite of this guide. That is, flash my existing deblur SBF, but with the T-Mobile BP files, to convert my Telus Charm into one that works on T-Mobile/Wind/Mobilicity.
Click to expand...
Click to collapse
yes you can but you will have to download telus sbf and T-mobile sbf, then replace firmware of t-mo sbf with that of the telus then copy bp files from telus to t mo, its given in the guide.
but after flashing t-mo ROM you can flash any other sbf other than. t mo as the bootloader gets updated.
but you could try the reverse to obtain a telus ROm working on T mo. Don't have either of these, so can't test it out also.
Cool, thanks. Will try it and report back.
Sent from my Galaxy Nexus using xda premium
Link to the sbf file is dead.
So this is supposed to enable 3g internet connection as well?.. i did everything and managed to use 2g and 3g to calls and sms.. but i cant see the internet connection option..
eetu1923 said:
So this is supposed to enable 3g internet connection as well?.. i did everything and managed to use 2g and 3g to calls and sms.. but i cant see the internet connection option..
Click to expand...
Click to collapse
You'll need to update the apn settings for your carrier. Look around on the forums or search web, there are instructions. Your carrier's website could be helpful too, for example Bell Mobility (Canada): http://support.bell.ca/Mobility/Sma..._Nexus_One_for_the_Bell_Mobility_HSPA_network
ergosteur said:
You'll need to update the apn settings for your carrier. Look around on the forums or search web, there are instructions. Your carrier's website could be helpful too, for example Bell Mobility (Canada): http://support.bell.ca/Mobility/Sma..._Nexus_One_for_the_Bell_Mobility_HSPA_network
Click to expand...
Click to collapse
Well my Carrier is Telcel in Mexico, but i have already created the APN settings for it.. but thers no option to turn on the data services... in some other forum they told me that the baseband frecuencies arent compatible and the only way of getting my 3g data back is to restore the device to the original LATAM firmware.. which i guess im not able to do since i cant go back from the TMOBILE bootloader..
PLease tell me im wrong and that there is a way of doing this..
Im gbuessing maybe sending it to motorola and they could do some magic?...
eetu1923 said:
Well my Carrier is Telcel in Mexico, but i have already created the APN settings for it.. but thers no option to turn on the data services... in some other forum they told me that the baseband frecuencies arent compatible and the only way of getting my 3g data back is to restore the device to the original LATAM firmware.. which i guess im not able to do since i cant go back from the TMOBILE bootloader..
PLease tell me im wrong and that there is a way of doing this..
Im gbuessing maybe sending it to motorola and they could do some magic?...
Click to expand...
Click to collapse
Hmm, weird, so you copied the bp_nvm_default files as above, and your 3G is working for calls but not for data?
Maybe try re-flashing the ROM?
I have a Charm that was originally on Telus (Canada), they use the same frequencies as Telcel (850/1900) for HSPA. Flashed the T-Mobile sbf and lost 3G, but replacing the bp_nvm_default files made the 3G work with Telus again. Took a couple of tries though - it's a bit finicky. Had to re-flash T-Mobile ROM a couple of times before the mod worked.
ergosteur said:
Hmm, weird, so you copied the bp_nvm_default files as above, and your 3G is working for calls but not for data?
Maybe try re-flashing the ROM?
I have a Charm that was originally on Telus (Canada), they use the same frequencies as Telcel (850/1900) for HSPA. Flashed the T-Mobile sbf and lost 3G, but replacing the bp_nvm_default files made the 3G work with Telus again. Took a couple of tries though - it's a bit finicky. Had to re-flash T-Mobile ROM a couple of times before the mod worked.
Click to expand...
Click to collapse
You are giving me hope here hehe ..
Well i did replaced the bp_nvm_default files...
You see after the flash of the Tmobile rom i had to do that in order for the phone to recognize the Telcel network.. so after i replaced the bp_nvm_default files, it worked and i can make calls.. and access 2g and 3g networks..
Then i went to wireless settings and added the APN info for telcel.. MMS, GPRS, and 3G... Everything ok there or so it seems..
Then i went to Data Delivery Settings.. but there is no option to turn off the Data services for 3g or 2g for that matter...
I have seen this in some other T Mobile roms (in a droid 2)....
Any clues..?? do you have a way to enable 3g data in your settings?...
eetu1923 said:
You are giving me hope here hehe ..
Well i did replaced the bp_nvm_default files...
You see after the flash of the Tmobile rom i had to do that in order for the phone to recognize the Telcel network.. so after i replaced the bp_nvm_default files, it worked and i can make calls.. and access 2g and 3g networks..
Then i went to wireless settings and added the APN info for telcel.. MMS, GPRS, and 3G... Everything ok there or so it seems..
Then i went to Data Delivery Settings.. but there is no option to turn off the Data services for 3g or 2g for that matter...
I have seen this in some other T Mobile roms (in a droid 2)....
Any clues..?? do you have a way to enable 3g data in your settings?...
Click to expand...
Click to collapse
Gave my Charm to my brother. I can probably check with him tomorrow and report back.
ergosteur said:
Gave my Charm to my brother. I can probably check with him tomorrow and report back.
Click to expand...
Click to collapse
Please doo
Hey guys, I got stuck on T-Mo firmware T-Mobile_MB502_02.60.5_1FF_01, trying to unlock my phone but the band of my operator is for 850-1900, so no phone calls.
I followed this tutorial and it looks that it worked but after RSD finishes and restart the phone, I'm geting the message "SIM network unlock phone" does this means that:
--- it is recognizing the band of my operator (Claro - Colombia) but I need to use one of the services that offers the unlock code like "unlockallcellular.com"?--- that was the point of doing the flash anyways...
or
--- for step "E- Restore network" I need the files from the - "bp_nvm_default" - folder from a actual working Charm on my network? I'm using the ones given on http://forum.xda-developers.com/showthread.php?t=903969&page=4 (TELUS) is there any unlocked ones?
or
--- Am I doing anything wrong? :crying::crying::crying::crying: I've done the procedure like 10 times...
Thanks in advance for any help!!!

{{NEW}} One Click Root [4.1.B.0.587/.431/ 4.0.2.A.0.62] {Arc S / Arc / PRO}

Hi folks
Here is how to root 2011 Xperia running any of the 4.1.B.0.587 4.1.B.0.431 / 4.1.A.0.562 and 4.0.2.A.0.62 firmware . No need to downgrade kernels or anything, just root it straight away
Rooting
Go to settings > Security > Mark "Unknown sources"
Settings > Developer options > Mark USB debugging
Settings > Xperia > connectivity > USB connection mode > select MSC mode
PC Companion installed on your PC.
1) Connect your phone to PC ( IMPORTANT > Skip PC Companion installation pop up on your phone.) and wait for the adb drivers to be installed. If these drivers don't get installed, phone would not be detected by Eroot.
Make sure nothing else ( specially flashtool ) is running on your PC in the background.
2) Download this rooting toolkit. Google Drive /// MediaFire /// 4-Shared and run it. If any downloading starts, cancel it by clicking the green button. Don't let the eroot download anything.
It should now detect your phone and show an option to "-root". Just click on it, wait till it finishes
3)Rooting done ( For confirmation see if any Super User app has been installed )
4) If by chance it fails for the first time, give it another go. it won't harm your phone in any way. If you still face problem, click on show content below
Go to your C:/ Drive / User/Username/AppData/Roaming/ folder and delete the eRoot folder.
If it says cannot be deleted then open up task manager on your PC and kill bec.exe . Then delete eroot folder.
Still not working ? used the archived method to root 2011 Xperia here below the animated Xperia picture.
http://talk.sonymobile.com/message/398771#398771
5) While posting in the thread for help, remember to give details. Don't just write > "it's not working, help please ".
"Confirmed working on" List
( Both Unlocked / Locked Bootloaders )
Xperia SL / S / ION / Acro S
Arc / Arc S
Pro
Neo V / Neo
Ray
Mini / Mini Pro
Live with walkman
Xperia Active
Xperia Play
All Xperias Rooting thread
AW: {Arc S/ Arc / Ray} One Click Root for [4.1.B.0.587 / 4.1.B.0.431 / 4.1.A.0.562 ]
Hey Nabeel,
I still remember you from sony's forum Haha
Nice & easy way rooting :good:
Thanks for your help on the past ^^
jader13254 said:
Hey Nabeel,
I still remember you from sony's forum Haha
Nice & easy way rooting :good:
Thanks for your help on the past ^^
Click to expand...
Click to collapse
Hahaha, How can i forgot you man
BTW i'm really happy for what you're today
All the very best with your work jader :good:
AW: {Arc S/ Arc / Ray} One Click Root for [4.1.B.0.587 / 4.1.B.0.431 / 4.1.A.0.562 ]
Nabeel. said:
Hahaha, How can i forgot you man
BTW i'm really happy for what you're today
All the very best with your work jader :good:
Click to expand...
Click to collapse
Haha I love you man! I still remember where I posted questions in sony's talk forum, after I firstly flashed ICS and wanted to flash back stock gb...
Can't forget the sentence: "sharing the forum's love" after I was happy you helped me with everything
Haha awesome time...
Oops, this getting into OT...
Maybe we can continue in general talk thread... >> http://forum.xda-developers.com/showthread.php?t=1873673
Cheers,
Jader
Thank you for all info,this was simple and fast :laugh:
Did this work on UNLOCKED BOOTLOADER:beer:
Sent from my LT18i using xda app-developers app
omerino said:
Thank you for all info,this was simple and fast :laugh:
Click to expand...
Click to collapse
Thanks for posting man
uncle donal said:
Did this work on UNLOCKED BOOTLOADER:beer:
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Yes it's for both locked/ unlocked bootloader
Confirm working on neo L
Confirm working on neo L
For neo L with Tigris Kernel,Vengeance ... ( Unlock BL )
Just connect to PC , and do the steps in OP
For neo L Lock BL
1. Enable USB Debugging from (Menu\Settings\Developer Options\Development)
2. Enable Unknown Sources from (Menu\Settings\Security)
3. Enable MSC Mode from (Menu\Setting\Xperia\Connectivity\USB Connection Mode)
4.Then simply flash MT11i_4.1.A.0.562_kernel via Flashtool
5.Then Root using the tool above , after done manually remove and reinsert battery
6.Then flash back MT25i_4.1.B.0.626_KERNEL ONLY_bywewenk or MT25i_4.1.B.0.631_KERNEL ONLY_bywewenk
*If you are on .626 & .587 use .626 kernel , If you are on .631 then use .631 kernel
Awesome
Confirmed working fine on Arc S (LT18i) running 4.1.B.0.587.
Awesome!!!!
Just today I decided to finally root it. I had been looking for some ways to do it here but hadn't decided how to do it yet. I wasn't too enthousiastic about having to downgrade, root, and upgrade again. (Most of all, I didn't want to have to reconfigure my entire phone...)
The primary reason for wanting to root was moving more apps to SD - I'm tired of not being able to install apps and having to decide every week which app I need to uninstall since I'm running out of space.
So - I used this. The menu is in Japanese (I think - correct me if I'm wrong ), but I managed to get it to work after 2 attempts.
If whoever made it could translate the GUI to English and add an option to choose a language. it would be great. But even without that, it did the job for me!
Whoever made this - THANK YOU!
Nabeel Bro, i tested ur signature, it's working fine for me !!
Hi Nabeel.!
This is a really easy way to root.
It works fine in my brother's Xperia Arc S running 4.1.B.0.587.
Thanks a lot!
Saingpor said:
Confirm working on neo L
For neo L with Tigris Kernel,Vengeance ... ( Unlock BL )
Just connect to PC , and do the steps in OP
For neo L Lock BL
1. Enable USB Debugging from (Menu\Settings\Developer Options\Development)
2. Enable Unknown Sources from (Menu\Settings\Security)
3. Enable MTP Mode from (Menu\Setting\Xperia\Connectivity\USB Connection Mode)
4.Then simply flash MT11i_4.1.A.0.562_kernel via Flashtool
5.Then Root using the tool above , after done manually remove and reinsert battery
6.Then flash back MT25i_4.1.B.0.626_KERNEL ONLY_bywewenk or MT25i_4.1.B.0.631_KERNEL ONLY_bywewenk
*If you are on .626 & .587 use .626 kernel , If you are on .631 then use .631 kernel
Click to expand...
Click to collapse
So i guess it's a success for that " For neo L with Tigris Kernel,Vengeance " ?? Because on locked bootloader even doomlord kit works by swapping kernel.
Daniel75 said:
Confirmed working fine on Arc S (LT18i) running 4.1.B.0.587.
Awesome!!!!
Just today I decided to finally root it. I had been looking for some ways to do it here but hadn't decided how to do it yet. I wasn't too enthousiastic about having to downgrade, root, and upgrade again. (Most of all, I didn't want to have to reconfigure my entire phone...)
The primary reason for wanting to root was moving more apps to SD - I'm tired of not being able to install apps and having to decide every week which app I need to uninstall since I'm running out of space.
So - I used this. The menu is in Japanese (I think - correct me if I'm wrong ), but I managed to get it to work after 2 attempts.
If whoever made it could translate the GUI to English and add an option to choose a language. it would be great. But even without that, it did the job for me!
Whoever made this - THANK YOU!
Click to expand...
Click to collapse
It's Chinese.. Anyways, All this was made possible because of that user wym986 , so i hope you pressed thanks button for him in his thread
Even if you search for Eroot, you won't find no word. it's really him who posted and saved us all
auni said:
Nabeel Bro, i tested ur signature, it's working fine for me !!
Click to expand...
Click to collapse
Yeah Auni, hard luck, will contact a mod tomorrow
BajoPrimate said:
Hi Nabeel.!
This is a really easy way to root.
It works fine in my brother's Xperia Arc S running 4.1.B.0.587.
Thanks a lot!
Click to expand...
Click to collapse
No problem mate
root 587
no root arcs buil 587
help me
nl2988 said:
no root arcs buil 587
help me
Click to expand...
Click to collapse
Arc S was the first phone to be tested and I did that :victory:
Without any problem.
You've to tell us what problems are you facing, then only we could help you.
Not working on windows 8 pro 64 bit
:crying::crying::crying::crying:
jcgechevarria said:
:crying::crying::crying::crying:
Click to expand...
Click to collapse
Man, it works on widnows 8 as well.
Please remember to give details about the problem. So what's exactly happening ?
Nabeel. said:
Man, it works on widnows 8 as well.
Please remember to give details about the problem. So what's exactly happening ?
Click to expand...
Click to collapse
I tried all the links, first Bitdefender says that has a virus, second if i disable antivirus, program runs, downloads somthing about 10 mb, and closes.
My phone is an lt15i arc, as you can see on my signature.
jcgechevarria said:
I tried all the links, first Bitdefender says that has a virus, second if i disable antivirus, program runs, downloads somthing about 10 mb, and closes.
My phone is an lt15i arc, as you can see on my signature.
Click to expand...
Click to collapse
Yeah,
But what i need to know is, that eroot kit detects your mobile at all ?
It closes on it's own ?
It's probably the antivirus acting up buddy. I just tested again on W8 pc and it works really fine.
First connect your phone to PC with USB debugging on, then wait until the adb driver is installed. Only After that run the rooting toolkit . Cancel that downloading ( 10MB ) as soon as you see it, now see if it shows an option to Root.
If that doesn't help then follow this reply. ( Your antivirus might have removed some file of eroot, that's causing it to close on it's own, so follow this reply and install eroot again , but before that make sure you disable antivirus) >
http://talk.sonymobile.com/message/446240#446240
Nabeel. said:
Yeah,
But what i need to know is, that eroot kit detects your mobile at all ?
It closes on it's own ?
It's probably the antivirus acting up buddy. I just tested again on W8 pc and it works really fine.
First connect your phone to PC with USB debugging on, then wait until the adb driver is installed. Only After that run the rooting toolkit . Cancel that downloading ( 10MB ) as soon as you see it, now see if it shows an option to Root.
If that doesn't help then follow this reply. ( Your antivirus might have removed some file of eroot, that's causing it to close on it's own, so follow this reply and install eroot again , but before that make sure you disable antivirus) >
http://talk.sonymobile.com/message/446240#446240
Click to expand...
Click to collapse
First thanks for your replies, no, eroot does not see my phone, and yes it closes on it's own, i will try all you explain may be tomorrow, will report result as soon as i can, only last question, usb mode on msc or mtp, beacouse i see both ways on diferents posts.
I've used MSC.
Good luck.
Sent from my GT-S5830

[GUIDE] SUCCESS!!! SIM-Unlock Sprint XT1056 (SIM-CRACK) Moto X GSM **NOW U.S. TOO!**

Greetings fellow XDAers,
It's finally happened: SIM-Unlock for the Sprint Moto X (XT1056)
(International-use Only. Anyone in the U.S. - Don't bother at the moment. Myself and some others are looking into the possibility of extending the SIM-CRACK to U.S. users, but RIGHT NOW, not possible. Sorry.) NOW EXTENDED TO DOMESTIC U.S. USERS AS WELL! - I have discovered the domestic-unlock solution!!!!
First, a little background:
Since its debut in August, 2013 many people have been trying to crack the SIM-LOCK on the XT1056. Many have tried and long since given up. I officially became involved in the project in May, 2014, and since then, had taken over the project. After much research, I determined that a Chinese hacker had found the solution and was offering a SIM-Unlock service on Taobao.com. This individual was extremely secretive about his methods - and told no one the solution. In order to use the service, you had to SEND your XT1056 to China to be unlocked (for fear of someone discovering his method). Then, a short time afterwards, the listing completely disappeared from Taobao, never to be seen again. Afterwards, sellers only offered PRE-SIM-CRACKED XT1056's on Taobao. Fortunately, I had already discovered (by reading his prior listing), that the SIM-Unlock required that you NEVER erase the modemst1 and/or modemst2 partitions (the equivalent of EFS/baseband cache on the Moto X).
At this point, I knew without a doubt that the key was in the modemst partitions. The breakthrough, however, didn't come until Mid-July, when another XDA Member: @yefonme posted to the thread that they had obtained a China-SIM-Cracked XT1056. This user confirmed the information I already knew by telling me that the seller advised that they must never erase the modemst partitions or the SIM-Unlock would be lost. This user generously offered to assist in helping find the solution, just for sheer curiosity - they wanted to know HOW the SIM-Unlock was achieved.
At this point, I thought we had everything we needed. Knowing that the key lies in the baseband cache, I requested various users to use a tool to backup their modemst1/modemst2 partitions, and send them to me for comparison with a HEX-Editor. Several users obliged, but unfortunately, we hit another roadblock -- the EFS partitions turned out to be ENCRYPTED TO HELL! That method was going nowhere. Then I realized that upon erasing the baseband cache (modemst1/modemst2 partitions), that all NV-ITEMS were reset to their factory defaults. BINGO! This means that the baseband cache partitions MUST store the encrypted contents of NVRAM!
This meant we had another option! Using standard CDMA tools, we could do a "DUMP" of the values stored in NVRAM. Another user, @ezeuba, suggested a simple tool, and provided instructions for the other's involved to DUMP the contents of their NVRAM, for comparison. Another big issue: Since many NVITEMS are inactive / restricted, even between 2 Sprint SIM-Locked devices, it made it completely impossible to use a utility to run a differential comparison between these NV-DUMPS. This meant that the NV-ITEMS had to be compared manually, by-hand.
I spent countless hours scouring through the data, comparing the THOUSANDS of NV-ITEMS from the China-Cracked XT1056 with the dumps provided by the Sprint SIM-Locked users. It was taking forever! I knew that the key to comparing the NVITEMS was finding values that were the SAME on all the Locked XT1056s, but DIFFERENT, only on the SIM-CRACKED XT1056. If a particular NVITEM differs between 2 or more LOCKED XT1056s, it is likely not the value we are looking for.
Then, finally, I came across an NVITEM that struck me as unique. It was the SAME on all the LOCKED XT1056's I analyzed, but different ONLY on the CRACKED XT1056. I was hesitantly optimistic, and posted about it here: http://forum.xda-developers.com/showpost.php?p=54334931&postcount=250
Well, my intuition was Spot-On, and this DID turn out to be the proverbial "smoking gun". Another user (ignoring my suggestions to WAIT and let another user who had offered to donate an XT1056 mainboard try it first) went ahead and wrote the new value as I had suggested. BAM!!! And the rest is HISTORY.
OK, so enough about the history, and on to the solution!!!!!
So the key lies in NVITEM # 8378
On the China-Cracked XT1056, the value was "01"
On all the SIM-LOCKED XT1056's, the value was "00"
That's all there is to it. You can use the CDMA Tool of your choice to write "01" to NVITEM 8378 to achieve SIM-Unlock!
You will also need to change the RUIM config to "RUIM-Only" in order to prevent the phone from reverting to CDMA-mode upon reboot. This is controlled by NVITEM 855 (see instructions in post # 2)
This method is KNOWN to unlock for all international GSM carriers, but DOES NOT unlock for Domestic U.S. carriers. Something else is in place, it appears, that BLOCKS the United States MCCs. NOW EXTENDED TO U.S. USERS AS WELL!!!
POST # 2 in this thread will be reserved for complete instructions for those of you who aren't familiar with how to write NV-ITEMS. These instructions are courtesy of @ezeuba.
POST # 3 will be reserved for detailed instructions on how to install the necessary DIAG Drivers, and how to manually FORCE driver installation, if necessary.
I believe in giving credit where it is due, so I want to personally thank:
* @hsngt and @jaaa1976 - who provided me with the NVDUMPS I used to find the SIM-Unlock method. @jaaa1976 was the FIRST person to be unlocked by my method
* @ezeuba for providing these users with step-by-step instructions on how to READ and SAVE said NVITEM dumps.
* @Vivjen for support and generous offer to donate a XT1056 mainboard (which turned out to be unnecessary)
* @crabbyone for encouraging me to take a 2nd look at NVITEM # 8322 (which turned out to be the Domestic Unlock solution)
* @Arnold Snarb for originally discovering the property of NVITEM # 8322 (which unlocked the Razr M for domestic use)
* All the others who submitted EFS and/or NVDUMPS (even though I didn't use them to find the solution)
* Everyone who believed in me and provided encouragement and moral support ( that includes YOU, @KJ )
* Everyone who makes good on their bounty pledges and everyone who DONATES (paypal: [email protected] )
* Everyone who is appreciative and gracious for the ENORMOUS amount of time I've spent making this SIM-Unlock possible for everyone
* The China-man who found the solution FIRST, even though he didn't share it with anyone and intended to only use it for Profit (I bet he is PISSED at me -- he was charging $80 U.S. for EACH unlock )
*** and ESPECIALLY @yefonme --- without YOU, NONE of this would be possible.
[Q]: How much should I donate to you for all the time (weeks) you spent working on this?
[A]: Please donate what you feel it is worth to you. The XT1056 can be found far cheaper than any other Moto X Variant, and now that we can SIM-UNLOCK it, it will become much more popular. If I have saved you money, or added value to the phone you already own, I would appreciate being compensated accordingly. I realize that some are not able to donate, and I understand. Do what you can / what you feel is fair. I spent countless hours on this, and would appreciate being somewhat-compensated for my efforts. This, of course, is not a requirement, since I have posted the solution and made it freely available to everyone. Keep in mind that the China Taobao-seller was charging $80 for EACH unlock...and HIS sim-crack didn't even unlock for Domestic U.S users!!!
PayPal Donation address: [email protected]
DO NOT email me asking for help with this. I won't answer you. *Post in the Thread* - this is the only way you will get support. I'm sure that you understand...
Additional info:
This works for all Republic Wireless XT1049's also, but ONLY if you can unlock the bootloader (only possible through the "China Middleman" - use search). You MUST flash the Sprint XT1056 ROM to your RW XT1049 device for this to work for you.
DISCLAIMER:
If you use my SIM-CRACK, I'm not responsible for ANYTHING that goes wrong. USE CAUTION! If you hit the wrong button, or write the wrong NVITEM, you could end up in BIG TROUBLE (possible BRICK). You have been warned.
And lastly, YOU MAY ---NOT--- COPY ANY PART OF MY SIM-UNLOCK METHODS. YOU MAY NOT SHARE/RE-DISTRIBUTE MY FILES, OR POST THEM TO OTHER SITES. THE ONLY ACCEPTABLE THING IS TO ---LINK--- THIS THREAD TO OTHER SITES. IT IS UNACCEPTABLE TO STEAL MY (OR ANYONE ELSE'S) WORK!!!!! I will be extremely offended if I find that someone stole my work and posted it elsewhere. ONLY Link this thread. Don't copy any or all of its contents elsewhere. PERIOD.
^This is NOT an unreasonable request....
FULL INSTRUCTIONS ​
!!!!! A WORD OF WARNING:
Once you complete this method, it is possible that you will NEVER be able to use your phone on Sprint / CDMA again! I -stupidly- flashed my Republic Wireless XT1049 (I should have known better -- I am using their service, and had no intentions of switching to GSM) in attempt to get better results / instructions for you guys. Now my phone is STUCK in GSM mode, the roaming indicator will not go away, I can't make calls on CELL, and no matter what I've tried, I cannot revert back. Not flashing my EFS backup, nor flashing back to stock, nor erasing the modemst partitions has been able to get me back on CDMA. PRL is STUCK on "1", and no matter how many times I write a new PRL, it won't stick. I'll be lucky if I can get my phone back in working order.....
^EDIT to above: This turned out to be EASILY fixed by flashing the entire SPRINT SBF to my Republic Wireless device, then, subsequently flashing back the Republic Wireless ROM (I WANT to STAY on Republic Wireless). DO NOT ATTEMPT THIS SIM-Unlock on the Republic Wireless ROM. Something about the RW ROM prevents you from going back to CDMA once on GSM. Flash the SPRINT ROM, FIRST, if you want to GSM-Unlock your Republic Wireless XT1049. The SPRINT ROM does not seem to have this issue, so you are probably OK, but take caution, nonetheless. I'm finally back on Republic Wireless (CDMA) after hours of frustration and fear that I was permanently stuck on GSM.
I don't recommend this if you plan to ever go back to CDMA / Sprint Probably fine - But once again, use caution.
Still want to continue? ------> Don't blame me if you end up STUCK on GSM
If you want my support, you must be on the Stock XT1056 Sprint ROM. I will not support any other ROMS from any other variants, or any custom roms. If you change roms, good luck, but no support will be provided. Additionally, support will ONLY be provided by posting to this thread. Do not email me or PM me with questions. I'm sure you understand...
AND Don't forget: This DOES NOT unlock for Domestic use, in the United States. Blame Motorola/Sprint. Something else is in place, it seems, that BLOCKS the U.S. MCCs. If you live in the U.S., DON'T BOTHER, unless you plan to sell your device to someone overseas. Myself and others are looking into the possibility of extending the SIM-Unlock to those in the U.S., but hasn't happened YET. I've also discovered the DOMESTIC UNLOCK solution now, as well!!!
FIRST, you must be in DIAGNOSTIC MODE:
You MUST have "USB Debugging" DISABLED, or the DIAG Port will NOT activate!!!
ezeuba said:
There are 2 ways to get to DIAG mode on this device. If ##3424# doesn't work, you can try the default for most Motorola devices: Power off phone. Hold down BOTH Volume Buttons and press the Power Button (It's called the 3-finger salute). When the phone boots, it will display a diagnostic screen called Fastboot Mode with options to scroll to and select. Use the Volume Down Button to scroll and the Volume Up Button to select. Scroll to the bottom of that list and when BP TOOLS is highlighted, press the Volume Up Button. The phone will restart and if you have Motorola device drivers on your computer, it will install the correct port (something like BP DIAG port Motorola QC Diag Port - look for it in your computer's Device Manager to get the port number).[/B]
Click to expand...
Click to collapse
****If you are having driver issues, and you have an entry for "Motorola QC Diag Interface" (not "Port") under "Other Devices" (and not "Ports (COM & LPT)"), SEE POST # 3 for detailed instructions (WITH PICTURES) on how to FORCE the driver installation.
Next, download and install the attached "SPCUtility.apk" app on your phone. Run it -- it will give you YOUR SPC Code. Write it down / take note of it.
IF ANYONE CAN TELL ME WHO DEVELOPED THIS APP, I WILL GIVE THEM THE APPROPRIATE CREDIT. I have tried (without success) to find out who the author is.
Then, flash the attached nv-unlock.txt, nv-unlock2.txt, unlock-domestic.txt AND nv-ruim-only.txt files as per these instructions:
1. Open the attached "NV-Items Reader-Writer"
2. Enter YOUR COM PORT # as shown in DEVICE Manager
3. Enter YOUR SPC Code into the box, as shown.
4. Check the box immediately next to where you entered the SPC Code.
5. Click "Connect"!
Now, follow these instructions:
1. Click "READ" --AT THE TOP--
2. Make sure it says: "SPC is Correct. Phone Unlocked."
3. Click the "Write" button, and find the "nv-unlock.txt" file - make sure it confirms success
4. Click the "Write" button, and find the "nv-unlock2.txt" file - make sure this confirms success
5. Click the "Write" button, and find the "unlock-domestic.txt" file - make sure this also confirms success
6. Click the "Write" button, and find the "nv-ruim-only.txt" fine - and make sure it confirms success as well
7. Last, click MODE, then RESET
And lastly, once the phone reboots, go to Settings, More, Mobile Networks and select GSM/UMTS.
DONE! You are SIM-Unlocked!
KNOWN ISSUES: On domestic carriers, users are reporting that although it DOES work, the signal bars may show no service. (I am looking into this.) Additionally, if data isn't working, YOU NEED TO INPUT THE PROPER APN FOR YOUR CARRIER (as with all GSM phones).
^^^***THIS MAY BE SOLVED*** Apparently, it involves simply using fastboot to set your carrier! (THANKS, @ejlmd , and @leonardoafa !!!) You can see this post for more details: http://forum.xda-developers.com/showpost.php?p=54468353&postcount=126 (And hit the "THANKS" to @ejlmd, and @leonardoafa in the linked post). This **should** fix your signal bar issues, AND roaming indicator, and allow SMS without issue.
ALSO, you will NOT get LTE data...on any carrier except Sprint because the radio inside doesn't support any LTE bands except 25 (used by Sprint). You also won't get HSPA/HSPA+ (3G/4G) data for any carrier using frequencies not supported by the Sprint Moto X. For instance: If you are using T-Mobile, unless you are in an area that has been re-farmed to 1900mhz HSPA/HSPA+, you will only get EDGE data. This is because T-Mobile extensively uses HSPA/HSPA+ on the 1700mhz AWS band which is not supported by the Sprint Moto X. See the link below for a complete list of frequencies supported by the XT1056.
http://en.wikipedia.org/wiki/Moto_X
Keep in mind that once you write the "nv-ruim-only.txt" file, you will no longer be able to use CDMA without flashing the "revert" file listed below (puts you back on the default RUIM-CONFIG). The "revert" file is ONLY to be used if you want (for some reason) to switch back to CDMA. You do not need it if you intend to only use GSM. Also, the purpose of "nv-unlock2" is to unlock the MIP settings, and prevent the phone from reverting BACK to NV-Only upon reboot.
Additionally, keep in mind that if you ever "SBF" back to stock, using RSD Lite (or fastboot method), it will un-do the SIM-CRACK, and you will need to repeat these steps.
You ***SHOULD*** be able to accept Updates (OTAs) without losing the SIM-CRACK.
*****If you click any of the attached TXT files, and it OPENS in your browser, instead of downloading, RIGHT-CLICK on it, and click "Save Link As" -- it should download without issue.
[Q]: How much should I donate to you for all the time (weeks) you spent working on this?
[A]: Please donate what you feel it is worth to you. The XT1056 can be found far cheaper than any other Moto X Variant, and now that we can SIM-UNLOCK it, it will become much more popular. If I have saved you money, or added value to the phone you already own, I would appreciate being compensated accordingly. I realize that some are not able to donate, and I understand. Do what you can / what you feel is fair. I spent countless hours on this, and would appreciate being somewhat-compensated for my efforts. This, of course, is not a requirement, since I have posted the solution and made it freely available to everyone. Keep in mind that the China Taobao-seller was charging $80 for EACH unlock...and HIS sim-crack didn't even unlock for Domestic U.S users!!!
PayPal Donation address: [email protected]
Driver Issues?​
This post is for you.
In order to use the DIAG interface, you must first install the Motorola Drivers from here: https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
REMEMBER: As stated in POST # 2, you MUST have "USB Debugging" DISABLED, or the DIAG port will NOT activate.
If you installed these drivers, and you still can't get it to work, and you have an entry under "Other Devices" (In Device Manager) called "Motorola QC Diag Interface" (SEE PIC1, attached below) follow the instructions in the attached pictures STEP-BY-STEP, IN ORDER, to FORCE driver installation.
We are ONLY concerned with the QC Diag Interface - don't worry about the rest of the entries under "Unknown Devices" -- these are not important.
Once you have successfully FORCED the driver installation, you should have an entry under Ports (COM & LPT), called "Motorola QC Diag Port (COMX)" (SEE PIC8, attached below). NOTE the value of "X" - this is the COM port you will use for our purposes. When you successfully have this entry, you can continue with the "FULL INSTRUCTIONS" in POST # 2.
[Q]: How much should I donate to you for all the time (weeks) you spent working on this?
[A]: Please donate what you feel it is worth to you. The XT1056 can be found far cheaper than any other Moto X Variant, and now that we can SIM-UNLOCK it, it will become much more popular. If I have saved you money, or added value to the phone you already own, I would appreciate being compensated accordingly. I realize that some are not able to donate, and I understand. Do what you can / what you feel is fair. I spent countless hours on this, and would appreciate being somewhat-compensated for my efforts. This, of course, is not a requirement, since I have posted the solution and made it freely available to everyone. Keep in mind that the China Taobao-seller was charging $80 for EACH unlock...and HIS sim-crack didn't even unlock for Domestic U.S users!!!
PayPal Donation address: [email protected]
You're the man!!! I doff my hat for you, sir. I think the best option will be to create an nv-item txt file for that particular nv-item (8378). I will get to it now and see what gives. Cheers man...
ezeuba said:
You're the man!!! I doff my hat for you, sir. I think the best option will be to create an nv-item txt file for that particular nv-item (8378). I will get to it now and see what gives. Cheers man...
Click to expand...
Click to collapse
Excellent! Please get me the instructions & necessary tools to use ASAP so I can post it in Post # 2 for the users who need step-by-step instructions. Thanks for all your help as well - I have given you credit accordingly.
Excellent work,buddy!!!
Thanks to your efforts, I can imagine how difficult it is.
And I was very pleased to be able to help.:victory:
Done!!!
Just flash this attached file. Connect as usual to the NV-ITEMS Reader/Writer. Click Write and select the attached file which you must have downloaded. After writing, go to Mode and click reset. Phone will restart. Go to Settings, More, Mobile Networks and select GSM/UMTS. Phone unlocked. Special thanks again to @samwathegreat without whom this will not be possible.
I'm on GSM right now...
NB If you've been using this phone on CDMA, you need to change RUIM Config to RUIM Only, else whenever you restart it will revert back to CDMA mode.
ezeuba said:
Just flash this attached file. Connect as usual to the NV-ITEMS Reader/Writer. Click Write and select the attached file which you must have downloaded. After writing, go to Mode and click reset. Phone will restart. Go to Settings, More, Mobile Networks and select GSM/UMTS. Phone unlocked. Special thanks again to @samwathegreat without whom this will not be possible.
I'm on GSM right now...
Click to expand...
Click to collapse
POST # 2 Updated. Thanks!!!!!
hey man, amazing job on this! so many people will happy to see this!
You're the man!!!
Thanks again everyone.
I REALLY need someone in the United States to test this and advise whether or not it unlocks for Domestic (U.S.) GSM Carriers.
We know that the "official" Sprint OTA-Sim-Unlock (only offered if you are a current sprint customer, have had an account for a specified amount of time, and meet other criteria) does NOT unlock for domestic use (international only).
I'm anxious to find out if my SIM-CRACK unlocks for those of us in the U.S. -- I need to know ASAP so I can update my OP accordingly.
@samwathegreat
If it is possible that you could make a video or how to flash this to your phone I think it would be beneficial to some. Even if your phone is already unlocked if you can flash this way then I feel that it's going to stop the millions of questions that are going to come from the thread. Just my two cents, thanks again :good: :victory: :highfive:
Vekhez said:
@samwathegreat
If it is possible that you could make a video or how to flash this to your phone I think it would be beneficial to some. Even if your phone is already unlocked if you can flash this way then I feel that it's going to stop the millions of questions that are going to come from the thread. Just my two cents, thanks again :good: :victory: :highfive:
Click to expand...
Click to collapse
Good suggestion. Full, detailed, instructions are listed in POST # 2 already, but this could help some, and I could put it in POST # 3. I'll see if I can get another user to make a video.
Remember: I don't own an XT1056: I did all of this for YOU GUYS, and all without even owning a Sprint XT1056
You are welcome to create a video yourself! I think the instructions are concise enough that you should be able to manage making a video. If you do, I'll post it in #3 and give you appropriate credit for it.
samwathegreat said:
Good suggestion. Full, detailed, instructions are listed in POST # 2 already, but this could help some, and I could put it in POST # 3. I'll see if I can get another user to make a video.
Remember: I don't own an XT1056: I did all of this for YOU GUYS, and all without even owning a Sprint XT1056
You are welcome to create a video yourself! I think the instructions are concise enough that you should be able to manage making a video. If you do, I'll post it in #3 and give you appropriate credit for it.
Click to expand...
Click to collapse
I don't have the appropriate equipment or environment (living in a 'college dorm' (kinda like that) with 24 people, it's never quiet) otherwise I would make one ASAP.
You don't even have one?! OH MY GOD. Your amazing doing all of this without the device...
Also a few things, I can't download the .txt file... I can only view what it says... So how do I download that, and then from that where do I put it to flash, just in the text box?
Vekhez said:
I don't have the appropriate equipment or environment (living in a 'college dorm' (kinda like that) with 24 people, it's never quiet) otherwise I would make one ASAP.
You don't even have one?! OH MY GOD. Your amazing doing all of this without the device...
Also a few things, I can't download the .txt file... I can only view what it says... So how do I download that, and then from that where do I put it to flash, just in the text box?
Click to expand...
Click to collapse
Right-click the txt file. Then click "save link as". It will download perfectly. I will add this info to Post#2
XT1052
Nice job ! I followed the old thread.. I know how much work it was.
Just a question. This method will work on moto XT1052 version ?
Green78 said:
Nice job ! I followed the old thread.. I know how much work it was.
Just a question. This method will work on moto XT1052 version ?
Click to expand...
Click to collapse
No idea? Use the NV-ITEM reader/writer attached in POST # 2 to read NVITEM 8378
Under Range (Dec), type 8378 into both fields (type nothing into the HEX boxes) and click READ. If NV8378 is "00", there is a good chance it will. Try and let me know!!!! If it already reads "01", it won't work.
...can't you get a SIM-Unlock code from a regular GSM Sim-Unlock-Code seller for the XT1052?
actually I don't need sim unlock....but, some of french moto X owner bought their phone on US (XT1053 sorry, not XT1052).
But my question is the same: does it work on other moto X model ?
I'm gonna try you method to see what happen.
Green78 said:
actually I don't need sim unlock....but, some of french moto X owner bought their phone on US (XT1053 sorry, not XT1052).
But my question is the same: does it work on other moto X model ?
I'm gonna try you method to see what happen.
Click to expand...
Click to collapse
ALL XT1053s should already be sim-unlocked. In fact, all variants except the XT1056 and XT1049 (that aren't -already- unlocked) can be SIM-Unlocked using the normal methods...(online code-sellers, etc.)
My method definitely works on all XT1056s.
It *SHOULD* work on all XT1049s (Republic Wireless), but ONLY if you unlock the BL and flash the XT1056 ROM to it.
ezeuba said:
Just flash this attached file. Connect as usual to the NV-ITEMS Reader/Writer. Click Write and select the attached file which you must have downloaded. After writing, go to Mode and click reset. Phone will restart. Go to Settings, More, Mobile Networks and select GSM/UMTS. Phone unlocked. Special thanks again to @samwathegreat without whom this will not be possible.
I'm on GSM right now...
NB If you've been using this phone on CDMA, you need to change RUIM Config to RUIM Only, else whenever you restart it will revert back to CDMA mode.
Click to expand...
Click to collapse
Thanks for the update. Can you provide more detailed instructions on how to change to RUIM only? I know how to do this....with DFS anyways....but many won't. Which tool do you suggest?
Actually, I believe that RUIM config is also stored in a NV item!
I *believe* that it is NVITEM 855 --- can you check for me? If I'm right, "00" = RUIM only, and "01" = default setting. Can you confirm?!?!
We could just update the txt file with this one additional NV-Value, and the users would only have to flash the ONE file, and it will crack AND set the RUIM config to RUIM only.
What do you think?

Categories

Resources