I downloaded the 2016-11 update - hit restart and install and as it starts to boot I get the green android robot on his back, red triangle and an exclamation mark - it also says "no Command" further down the screen - it then starts as normal after about 1 minute - Please help what can I do? I had spent a day reinstalling and configuring this repaired phone. The hardware repair is otherwise fine.
Related
I have an A500 with stock 3.2.1. So I have the notification to upgrade to ICS OTA. Downloaded the file, when tablet reset it went back to a black screen with a green Android and a progressing bar appeared. The bar went up to around 25%; after that, a yellow exclamation symbol inside the Android appeared and the tablet reset. When it is back on, a message of upgrade fail shows up.
What I have done trying to resolve this issue:
-Factory Reset.
-Copy the update.zip file to a memory card and tried to install it from it.
Any other suggestion
Ever since receiving an OTA update a few days ago, my phone was never able to successfully reboot again. Instead, it does exactly this when I turn it on: Samsung logo appears when booting, then the At&t logo with the word "installing..." or "updating..." along with a loading bar at the bottom appears. The loading bar reaches 100%, but then it will say "update failed", and it reboots and the same process happens again. I've let the phone run on it's own for several ours to see if it'll ever snap out of the loop, but it just stays in the same never-ending cycle of constant rebooting and updating. My phone wasn't rooted and worked perfectly fine before the update, so I suspect something went wrong while it was updating. I tried pressing the home, volume, and power buttons in attempt to initiate a recovery boot and do a factory-reset, but nothing happens. And I've tried replacing the battery, SIM card, and micro SD card, but there's still no change. I still am, however, able to set it in ODIN mode, but I'm not sure what to do since I'm not techie/literate. Please help, I don't know how to get my phone properly working again.
7 2012, 32 gb. I have spent the last 2 days trying to find a way to make my tablet usable again after the latest android update. It goes from the Google screen Flixers then back to Google screen Android with the red triangle and exclamation mark saying no command i have tried wiping the cache, resetting it to factory, cant side-load because it inst recognized by the computer. I can get into the boot-loader but it doesn't help at all and now it does not want to turn on at all
any help ?
thanks
P.S i unplug the battery and waited a few second and reconnected and nothing
I have a stock moto x play whose hardware sku is XT1564. It's on android ver 5.1.1 and system version is 23.21.25.lux_lra.en.US
I have not performed any soft mods or alterations, be it root or bl unlocking.
The only thing that I would think is different than normal is that the phone is encrypted, so it asks for password whenever it boots up.
I got a notification to update to 24.74.5.en.US a few days ago and decided to try doing it today.
It downloads the update fine and when I press on the notification for it to start the update process where it says it needs to perform a reboot to update it goes into a "phone will reboot in 10 seconds" screen and when countdown finished it shows the "shutting down..." popup that appreas when you try to shutdown the phone.
Then the phone stays with that popup until it finally shutsdown like 4 minutes later on what appears to be a hard shutdown because it doesn't reboot. I have to manually power it on and then the phone starts up normally asks me for my password and about a minute after android fully loads the phone tries to shutdown again without any input. And then it just keeps doing that until I boot the phone into fastboot and try to get it to bootloader, where it shows the dead android logo with a red yield sign and promptly shutsdown. Then when I start the phone normally it shows an "update unsuccessful" screen.
Anyone have any idea what might be the problem?
I've been thinking it might be the encryption but IDK. Also I've checked the thread with the firmware versions and couldn't find mine there. Is there a way I could dump mine for backup in case I **** something up trying to get OTA to work.(without unlocking bootloader and rooting, of course)
Now the update has stopped appearing and I can't get it to recognize there being an update for this device.
Fudge!
Hi guys .. so i downloaded a custom theme from here ( dna aos-p black ) .and it worked however when i restarted my phone it was all messed up so i went to reapply it and then my phone restarted and now is stuck in boot loop.. it shows flashing Samsung logo and then optimizing apps and the turns off and repeats..
Phone is on android 8 with may security patch ... PLEASE HELP.. And thanks..
if memory serves you need to:
- while the phone is booting - once the Samsung logo starts appearing, press and hold "volume down + power button"
if it doesn't reboot then try playing around with your timing - when to start pressing both buttons.
if you get the timing right the phone should reboot into download mode form where you can flash the latest stock ROM
--
I've gotten myself into many a boot loop while flashing ROM's that didn't "sit well" with my SM-G9500.