Hi,
I'm not sure if it's the right place to ask this, but I need help. I just got my Axon 7 in the mail today so I was eager to root it and get started. It did not go well.
The version I got was on b27, and it had an update to b29 right out the box. I did not think too much of it and did the update. I realized later that if I wanted to root, I would need to be on b20 instead. No worries, I got into recovery, flashed the b20 stock image, and all went fine. I went on and rooted using tenfar's utility, and it also went fine. I rebooted went with DrakenFX's way to update back to b29, but something went wrong in the process, and I don't remember the exact message. I told myself that it might be cause I wasn't running the latest TWRP. When I first got into recover after using tenfar's utility, I noticed that the TWRP version was not the latest (3-0-2-0? maybe). I had just downloaded the most recent TWRP image from Unjustified Dev (twrp-3.0.2-2-a2017u.img), so I decided to update right away from within TWRP...I guess this is not something you can do.
Long story short, the phone simply won't get into recovery mode now. The led flashes red for a second, then the phone simply shuts down.
The weird part is that it boots just fine, and I can get into ADB and bootloader too. However, my bootloader is locked once more, and root does not work either. I am now on b29, so I cannot use tenfar's utility.
So, am I SOL? Is there a way to restore the stock recovery image via ADB? I tried flashing TWRP again, but I get a "FAILED (remote: Partition flashing is not allowed)" in ADB, most likely because my bootloader is locked again?
The good part is that the phone is usable and everything seems to work, but having no recovery is a bit unnerving...if something goes wrong again, the phone will be a dead brick.
Thank you very much.
OK, I just realized that I could still use tenfar's utility even though I was on b29....pheww, what a relief. Back in TWRP. Sorry, you can delete this thread (I would do it if I knew how )
arky33 said:
OK, I just realized that I could still use tenfar's utility even though I was on b29....pheww, what a relief. Back in TWRP. Sorry, you can delete this thread (I would do it if I knew how )
Click to expand...
Click to collapse
Can you link me in the right direction? I'm having the same problem where I can get to bootloader and fastboot, but no recovery. I'm on a2017u.x.x.b29, too.
Hi,
I am not sure anyone should follow my advice considering how I somehow managed to screw up a relatively simple process, but here's how I fixed it. I used tenfar's utility from this thread to flash TWRP again. Even though I was on B29, I used the B27 package and it worked fine. But don't flash the boot image, just the recovery! After that, I could boot into TWRP again. From there I followed this great instruction thread and got Lineage up and running in minutes.
I hope this helps you get going, but keep in mind that this might not be the proper way to do things, it's just what worked for me. Cheers.
arky33 said:
Hi,
I am not sure anyone should follow my advice considering how I somehow managed to screw up a relatively simple process, but here's how I fixed it. I used tenfar's utility from this thread to flash TWRP again. Even though I was on B29, I used the B27 package and it worked fine. But don't flash the boot image, just the recovery! After that, I could boot into TWRP again. From there I followed this great instruction thread and got Lineage up and running in minutes.
I hope this helps you get going, but keep in mind that this might not be the proper way to do things, it's just what worked for me. Cheers.
Click to expand...
Click to collapse
Thanks, Arky!
I've been away from XDA for quite some time since I've had the S6 Edge on Verizon and there hasn't been any type of root action on it. I really appreciate the links you posted!
Related
I tried to root my Nexus 6P and now I'm stuck. It won't finish booting. I followed instructions found on the web. I unlocked bootloader with no problem. I copied the latest SuperSU file to the phone. I installed TWRP recovery. However, I could not find the SuperSU file when using TWRP. Nevertheless, when I went to exit, TWRP asked if I wanted to instal SuperSU. I recall reading somewhere that it will install the wrong version of SuperSU (not the one for 6.0.1). Somehow I must have hit the wrong selection because it installed it anyway. Now I have an infinite loop.
I have tried to factory reset with TWRP. That fails. I downloaded the 6.0.1 images files from Google. I tried to run flash-all.bat, but that doesn't work. I have pushed images and ZIPs to the /sdcard/ folder with ADB. ADB recognizes the device, but fastboot does not (when connected to my laptop) (which is why flash-all doesn't work). I have tried to install the images/zips with TWRP. However, I always get "failed" messages. I get messages that partitions won't load.
Stupidly, I do not have a nandroid backup (yes, I know, a dumb move).
Any suggestions on what to try next? I'm at my wit's end with this. I've searched the web all morning and found all kinds of helpful info, but I can't find anything to get me past this point. I am perfectly willing to wipe it all out and start over again if I could just force it to do that. I just bought it so I suppose I could return it (I think there's a 30-day return policy), but Google might not like it if it comes back in this state, I suppose. I had an AT&T Galaxy Note 5 for half a day but found out, after the fact, that I can't root it.
Thanks for any help or suggestions.
Why did you follow instructions found on "Web" when u have the beautiful guide by our @Heisenberg? Read this thread. Instead of running flash - all. Bat file, follow the instructions in this guide. http://forum.xda-developers.com/showthread.php?t=3206928
jaidev.s said:
Why did you follow instructions found on "Web" when u have the beautiful guide by our @Heisenberg? Read this thread. Instead of running flash - all. Bat file, follow the instructions in this guide. http://forum.xda-developers.com/showthread.php?t=3206928
Click to expand...
Click to collapse
I saw that post. I wish I had followed it. However, the instructions are very similar to what I tried, although not exact. Where I went wrong is letting TWRP install SuperSU for me. I didn't mean to but when I touched the phone it installed it (of course, I hit something, but I don't know what). Fastboot does not recognize the phone in recovery. I can follow Heisenberg's instructions to get back to stock IF fastboot would recognize the phone. ADB recognizes the phone. Would it be possible to use ADB Sideload instead? How can I force fastboot to recognize the phone? If I could do that, I would be able to flash images back to the phone. Thanks!
U should try fastboot in bootloader / download mode instead of recovery mode..
OK, two comments: Duh (as I slap my head) and Bless You! That worked. I'm back to stock. At least the phone works now. I'll try again to root following Heinsenberg's instructions! Thanks. Where do I sent the beer money?
jaidev.s said:
U should try fastboot in bootloader / download mode instead of recovery mode..
Click to expand...
Click to collapse
Well, I'm back to a stock phone, anyway. Flashing SuperSU per Heinsenberg's instructions did not give me root. Oh well. I'll keep trying. It did install and it did reboot just fine. However, root checker says I have no root and Titanium Backup won't run, either. Thanks.
The phone is the Huawei Nexus 6P (MMB29M). No clue how this happened, but I managed to get root (working fine I can run apps that require root), but TWRP isn't on my phone. When I try to boot to recovery, it gives me the dead android symbol (dead android with front flap opened up and little red exclamation point). I can get into the boot loader just fine though, it's ONLY the recovery that is missing. Is it okay to use the TWRP app to install recovery the easy way? I have the TWRP app on my phone from the (failed) TWRP install, I guess. Or do I need to go through the whole root/recovery fastboot process again?
I don't know how I even got root without recovery, tbh. I was obviously in TWRP when I flashed superSU and busybox, but for whatever reason, it didn't stick. The only thing I can think of is that the phone took the liberty of replacing the recovery on its own when I restarted the phone (I didn't think to go back into recovery immediately, so the phone overwrote it...is that possible?)
The reason I'm asking about the TWRP app is because it has a very specific directory that it says it needs to install into and if that directory is wrong, the phone could be bricked. I've had the phone for less than a week, I'd prefer not to brick it. This is my 5th android device and I've never run into this issue before...in fact, I didn't even know it was POSSIBLE to get root without recovery. I did get a soft-brick earlier in the process, but I fixed it by re-flashing the stock android ROM (I also had to go change my pants afterward, but that's a story for another thread).
Thanks in advance for any assistance you can provide and have a nice Friday.
baronmax said:
The phone is the Huawei Nexus 6P (MMB29M). No clue how this happened, but I managed to get root (working fine I can run apps that require root), but TWRP isn't on my phone. When I try to boot to recovery, it gives me the dead android symbol (dead android with front flap opened up and little red exclamation point). I can get into the boot loader just fine though, it's ONLY the recovery that is missing. Is it okay to use the TWRP app to install recovery the easy way? I have the TWRP app on my phone from the (failed) TWRP install, I guess. Or do I need to go through the whole root/recovery fastboot process again?
I don't know how I even got root without recovery, tbh. I was obviously in TWRP when I flashed superSU and busybox, but for whatever reason, it didn't stick. The only thing I can think of is that the phone took the liberty of replacing the recovery on its own when I restarted the phone (I didn't think to go back into recovery immediately, so the phone overwrote it...is that possible?)
The reason I'm asking about the TWRP app is because it has a very specific directory that it says it needs to install into and if that directory is wrong, the phone could be bricked. I've had the phone for less than a week, I'd prefer not to brick it. This is my 5th android device and I've never run into this issue before...in fact, I didn't even know it was POSSIBLE to get root without recovery. I did get a soft-brick earlier in the process, but I fixed it by re-flashing the stock android ROM (I also had to go change my pants afterward, but that's a story for another thread).
Thanks in advance for any assistance you can provide and have a nice Friday.
Click to expand...
Click to collapse
This happened to me after the first time I installed twrp. I selected read only system after booting into twrp for the first time(they ask you if you want a read only option) and the stock rom would over write twrp with the stock recovery. Only fix for me was starting from scratch using step 11 here http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928. When you install twrp dont select the read only option and you'll be fine. Just remember not to let twrp install Su when it asks you to.
did you not read and follow the VERY detailed and specific instructions on how to do all of this, before beginning the process?
mistakes happen, and we are all here to help, but a softbrick followed by no recovery etc just seems like you tried to wing it without taking the proper time to read how to do it on your new device.
I'm sure someone will be able to give you a definite answer, but I also advise you to read @Heisenberg's guide on how to do it all on your 6P in the General section
Soulfly3 said:
did you not read and follow the VERY detailed and specific instructions on how to do all of this, before beginning the process?
mistakes happen, and we are all here to help, but a softbrick followed by no recovery etc just seems like you tried to wing it without taking the proper time to read how to do it on your new device.
I'm sure someone will be able to give you a definite answer, but I also advise you to read @Heisenberg's guide on how to do it all on your 6P in the General section
Click to expand...
Click to collapse
I read everything and my only mistake was selecting the read only option which clearly tell you that if you select read only it cant prevent the stock rom from over writing twrp with its own recovery. Mistakes happen.
can you not just install twrp again from the bootloader?
ahfu25 said:
I read everything and my only mistake was selecting the read only option which clearly tell you that if you select read only it cant prevent the stock rom from over writing twrp with its own recovery. Mistakes happen.
Click to expand...
Click to collapse
I was responding to the OP, not you.
uicnren said:
can you not just install twrp again from the bootloader?
Click to expand...
Click to collapse
Yes, but I was wondering if it was a bad idea to just let the TWRP app do it? That's what it's designed to do (that, and update TWRP). That's why I asked the question, I wasn't sure if that was a viable way to go about this or whether I just needed to re-do it from the nexus 6p "how to" that's on the site here.
Soulfly3 said:
I was responding to the OP, not you.
Click to expand...
Click to collapse
OK...have a nice day
I can't say for sure that I understand what you mean by using twrp when you don't even have it... but maybe see this post. (The bottom of that post.)
---------- Post added at 11:51 AM ---------- Previous post was at 11:46 AM ----------
oh, I get what you're saying now - can you do it with the twrp app - as in an actual app. i missed that word. I think i remember Heisenburg saying that, no, you shouldn't use the app. I think it doesn't get the right twrp version. the version we need for the 6p is in beta and not available throught the app.
---------- Post added at 12:07 PM ---------- Previous post was at 11:51 AM ----------
In a previous post of mine, I quoted the explanation from TWRP of the system read-only vs read-write thing: http://forum.xda-developers.com/showpost.php?p=64707169&postcount=2143 I think you may need to mount the system read-write to get twrp to "stick". ...or you need root (according to sirxdroid)? I don't know which... I'd love to know how you get it working again!
p.s. Sorry to keep appending to my response...
Good explanations and links, I had the same issue when I decided to root. I did not choose read only during my initial flash of TWRP and could not figure out why every time I flashed TWRP, rebooted then went into recovery, I lost TWRP! After I did my due diligence and read the threads, I realized what I did wrong. I flashed back to stock, then flashed TWRP as recovery. I went into recovery via bootloader and chose read only. Then I installed the su.zip, rebooted the bootloader, then it was all good. Good luck.
I think what I did wrong is fail to wipe the caches (not sure how I missed it, but I did, originally). I'm not entirely sure why that makes any difference, but I went through the rooting process again and installed TWRP, now things are working properly. I did two things differently, wiping the cache and booting directly back into recovery after installing recovery. I saw on the TWRP website that some ROMs will overwrite the boot.img and recovery sections if you don't boot back into recovery immediately (it doesn't overwrite them after the second time, for whatever reason). I'm not sure if this is what happened or not, but it's the one thing that actually makes SOME sense to me.
It's interesting that there's an app out there which claims to install TWRP, but people shouldn't use it, that would be a mighty handy app to have if it worked properly, no more worries and very little fuss.
Why not just fastboot flash recovery........takes 10 seconds.
first, i unlocked the bootloader and it was perfectly fine.
then i flashed the latest TWRP version
now, when i flashed supersu, i got bootloops.
i tried to to install the older TWRP version (2.8.7.1) but nothing improved so i reverted back to the latest version. Now even my recovery is borken.
I REALLY hope someone will help me fix my problem.
EDIT: I also tried to install the 2.62 version of SuperSu because the 2.46 didn't work.
anyone, please?
xxhunterxx11 said:
anyone, please?
Click to expand...
Click to collapse
Can you boot into Bootloader? You might have to reflash back to complete stock before you can do anything again using adb/fastboot commands. Have a look at my posts in this thread:
SOLVED: Flashed TruPureXMM rom in Indian dualsim XT1572 and now No sim detection
Most of my posts are on the second page but should help guide you to get back to stock without relocking the bootloader. Once you are back to stock and can confirm the phone is working, you can start your modding again. I can only assume your phone has a software issue. Unfortunately, this is the only solution I can think of and can't really suggest anything else. You will lose all your internal storage data using this method unless you have made a backup. I would normally do this using recovery but seeing as you can't boot normally or into that, I don't see a way for you to do that, unless you try pulling files through adb though this will probably be a long and slow process.
Hope this helps.
Thanks,
Ooms
Is it bricked or bootlooping? Those are 2 very different things. If its bootlooping then its not bricked. If its bricked then you can't do anything with it.
Nevermind guys, i've fixed it by flashing stock firmware through fastboot, just like dj_ooms said. Thanks for the help anyways. And also razieltov, i was getting bootloops. Sorry for not knowing the difference between the two
Hi
Earlier today I was running 7.0.0. Stock No root with unlocked bootloader, all of a sudden random reboots. Until it no longer wanted to go past Google screen. Plugged into nexus root toolkit, tried flashing stock, downgrading to marshmallow, locking bootloader, unlocking again, multiple times and tries with no luck. The device now will only allow me to get into bootloader when I plug it to charge and immediately press power & -volume. I would appreciate it any help I can get in this.
Thanks
roelmmata said:
Hi
Earlier today I was running 7.0.0. Stock No root with unlocked bootloader, all of a sudden random reboots. Until it no longer wanted to go past Google screen. Plugged into nexus root toolkit, tried flashing stock, downgrading to marshmallow, locking bootloader, unlocking again, multiple times and tries with no luck. The device now will only allow me to get into bootloader when I plug it to charge and immediately press power & -volume. I would appreciate it any help I can get in this.
Thanks
Click to expand...
Click to collapse
Just about everyone in this thread is in similar boat. I think there is one that was on 6.0, but most on npd90x I believe. There might be something useful to help you with. What version of twrp are you using? 3.0.2-1 has a bug with efs partition.
http://forum.xda-developers.com/nexus-6p/help/figure-brick-t3450921
Fe Mike said:
Just about everyone in this thread is in similar boat. I think there is one that was on 6.0, but most on npd90x I believe. There might be something useful to help you with. What version of twrp are you using? 3.0.2-1 has a bug with efs partition.
http://forum.xda-developers.com/nexus-6p/help/figure-brick-t3450921
Click to expand...
Click to collapse
I had tried to flash twrp but had gotten an error saying I wasn't in adb recovery and never got that to work.
roelmmata said:
I had tried to flash twrp but had gotten an error saying I wasn't in adb recovery and never got that to work.
Click to expand...
Click to collapse
You mean flash to install TWRP or you were trying to install via ADB and your phone wasn't in recovery? You flash the TWRP image to install it from your bootloader via fastboot commands. You can load other files onto your phone via ADB sideload while in recovery. It is helpful to be clear on the forums so people can better help.
Sent from my Nexus 6P using Tapatalk
ultyrunner said:
You mean flash to install TWRP or you were trying to install via ADB and your phone wasn't in recovery? You flash the TWRP image to install it from your bootloader via fastboot commands. You can load other files onto your phone via ADB sideload while in recovery. It is helpful to be clear on the forums so people can better help.
Click to expand...
Click to collapse
I had been trying to install twrp onto my phone through the toolkit, using the "root and install custom recovery option" but then it got the error and cancelled.
roelmmata said:
I had been trying to install twrp onto my phone through the toolkit, using the "root and install custom recovery option" but then it got the error and cancelled.
Click to expand...
Click to collapse
Again, without knowing what you have/haven't done in advance, it's hard to be of much help. To run ADB commands, you need to have USB debugging enabled on the device from settings. So, if you haven't done that, you can't do anything via ADB/fastboot and prior to that, I see you said you did have an unlocked bootloader.
Beyond those two things, which are reiterated within it, I'd strongly recommend following Heisenberg's guide at http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928 to do any flashing on your phone. This begins by ensuring you get a working version of the drivers installed to your machine via the Android SDK. Since your BL is unlocked, you should be able to flash TWRP via fastboot command. Also, ensure you are installing version 3.0.2-3, the latest 'unofficial' that is bug-free.
Fe Mike said:
Just about everyone in this thread is in similar boat. I think there is one that was on 6.0, but most on npd90x I believe. There might be something useful to help you with. What version of twrp are you using? 3.0.2-1 has a bug with efs partition.
http://forum.xda-developers.com/nexus-6p/help/figure-brick-t3450921
Click to expand...
Click to collapse
Thanks I try it out!
ultyrunner said:
Again, without knowing what you have/haven't done in advance, it's hard to be of much help. To run ADB commands, you need to have USB debugging enabled on the device from settings. So, if you haven't done that, you can't do anything via ADB/fastboot and prior to that, I see you said you did have an unlocked bootloader.
Beyond those two things, which are reiterated within it, I'd strongly recommend following Heisenberg's guide at http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928 to do any flashing on your phone. This begins by ensuring you get a working version of the drivers installed to your machine via the Android SDK. Since your BL is unlocked, you should be able to flash TWRP via fastboot command. Also, ensure you are installing version 3.0.2-3, the latest 'unofficial' that is bug-free.
Click to expand...
Click to collapse
Hey again
I used guide specifically to go back to stock, combined with a couple times of wiping in stock recovery I finally got the phone to boot up! However I've learned something new, the phone will only stay on if I'm plugged into charger, and as soon as it's unplugged it turns off. Any other suggestions?
Hey guys, I'm a little devastated. Hoping I didn't ruin my phone.
So, earlier today I unlocked my Moto G4 Plus's bootloader and installed TWRP recovery. I installed ElementalX and a superuser.zip file as well. After reboot, there was no superuser in my app drawer and when I checked my root status with Phh's Root Checker, it said that my phone was not rooted properly. I then found the guide here on how to root, and noticed that it had Phh's SuperUser. I changed the config.txt file like mentioned in the guide, booted into TWRP recovery and installed it and clicked on reboot. I got the usual bootloader unlocked message, but after that my screen went blackish-grey and has been that way since, which is about 15-20 minutes now. I (panicking and being a noob) tried switching it off using the power button which didn't work. I then checked to see if it showed up as connected device in android sdk/fastboot, which it didn't.
WHAT DO I DO? I can't just buy another phone since I can't afford it as I recently bought this one, so it's a really big deal for me. :crying:
PLEASE HELP ME.
Thank you.
UPDATE.
Hey guys,
First of all, thank you for the replies. I'm sorry I couldn't reply to them.
Secondly, a few things have happened since the OP. Keep in mind I had absolutely NO internet during the following events, so I couldn't do any research.
The night my phone went black screen, I went to sleep thinking i'll let it die out of battery and work the rest out in the morning. So the next morning I put the phone on charge and went into the bootloader. I tried doing a normal reboot which didn't work (I got the same screen) so I went into into bootloader again, connected the phone to my computer (it got recognized this time) and re-flashed TWRP. I went into recovery mode on the phone and tried re-flashing ElementalX and superuser. This time I got an error when trying to flash the superuser.zip, and the error was:
Updater process ended with ERROR: 1
Error installing zip file '/sdcard/superuser.zip'
I had another supersu.zip in my phone storage, tired installing it and got the same error.
When I tried doing a normal reboot into my system, it goes on a boot loop on the "your device is unlocked" screen and has been that way ever since.
What do I do now?
Should I try to re-flash TWRP and superuser with the right files, or should I restore stock recovery? I don't have any backup. (noob mistake)
I'd highly appreciate it anyone linked me the proper twrp and superuser or stock recovery files and if possible guided me on what to do.
PLEASE HELP ME.
thank you.
UPDATE #2
So I did what abhi212b told me to do and flashed the stock rom. Everything is fine now.
I'll try rooting it again a bit later. Thanks for the help.
UPDATE #3
I tried rooting my phone again, and it went flawlessly this time! Rooted successfully.
What an emotional rollercoaster lol.
Push the power button for at least 2-3 minutes. Worked for me and others in the past.
SSJGod said:
Hey guys, I'm a little devastated. Hoping I didn't ruin my phone.
So, earlier today I unlocked my Moto G4 Plus's bootloader and installed TWRP recovery. I installed ElementalX and a superuser.zip file as well. After reboot, there was no superuser in my app drawer and when I checked my root status with Phh's Root Checker, it said that my phone was not rooted properly. I then found the guide here on how to root, and noticed that it had Phh's SuperUser. I changed the config.txt file like mentioned in the guide, booted into TWRP recovery and installed it and clicked on reboot. I got the usual bootloader unlocked message, but after that my screen went blackish-grey and has been that way since, which is about 15-20 minutes now. I (panicking and being a noob) tried switching it off using the power button which didn't work. I then checked to see if it showed up as connected device in android sdk/fastboot, which it didn't.
WHAT DO I DO? I can't just buy another phone since I can't afford it as I recently bought this one, so it's a really big deal for me. :crying:
PLEASE HELP ME.
Thank you.
Click to expand...
Click to collapse
Like the poster above stated, hold the power button until the screen shuts off. YOUR PHONE WILL AUTO REBOOT!!! The instant the screen turns off, begin holding the volume down button. When you see the fastboot screen pop up, begin flashing your N images again, or use a custom ROM (which are generally much faster, easier to mess with, and easier to recover from).
Ex didn't flash properly.. That is what I can estimate! If u root on stock kernel, it breaks the device.
As said above go to bootloader (works on any screen... Power and volume down) and then to twrp maybe (flash twrp from fastboot). And then restore any previous nandroid u have.. If not u will have to flash stock via fastboot and then flash ex kernel. When u flash, restart and go to about phone and see if the kernel shows elemental x.. If yes, go to twrp and root it via suoersu, phhh's superuser or magisk su.. Whichever u like.. That should be fine!
UPDATE.
Hey guys,
First of all, thank you for the replies. I'm sorry I couldn't reply to them.
Secondly, a few things have happened since the OP. Keep in mind I had absolutely NO internet during the following events, so I couldn't do any research.
The night my phone went black screen, I went to sleep thinking i'll let it die out of battery and work the rest out in the morning. So the next morning I put the phone on charge and went into the bootloader. I tried doing a normal reboot which didn't work (I got the same screen) so I went into into bootloader again, connected the phone to my computer (it got recognized this time) and re-flashed TWRP. I went into recovery mode on the phone and tried re-flashing ElementalX and superuser. This time I got an error when trying to flash the superuser.zip, and the error was:
Updater process ended with ERROR: 1
Error installing zip file '/sdcard/superuser.zip'
I had another supersu.zip in my phone storage, tired installing it and got the same error.
When I tried doing a normal reboot into my system, it goes on a boot loop on the "your device is unlocked" screen and has been that way ever since.
What do I do now?
Should I try to re-flash TWRP and superuser with the right files, or should I restore stock recovery? I don't have any backup. (noob mistake)
I'd highly appreciate it anyone linked me the proper twrp and superuser or stock recovery files and if possible guided me on what to do.
PLEASE HELP ME.
thank you.
SSJGod said:
Hey guys,
First of all, thank you for the replies. I'm sorry I couldn't reply to them.
Secondly, a few things have happened since the OP. Keep in mind I had absolutely NO internet during the following events, so I couldn't do any research.
The night my phone went black screen, I went to sleep thinking i'll let it die out of battery and work the rest out in the morning. So the next morning I put the phone on charge and went into the bootloader. I tried doing a normal reboot which didn't work (I got the same screen) so I went into into bootloader again, connected the phone to my computer (it got recognized this time) and re-flashed TWRP. I went into recovery mode on the phone and tried re-flashing ElementalX and superuser. This time I got an error when trying to flash the superuser.zip, and the error was:
Updater process ended with ERROR: 1
Error installing zip file '/sdcard/superuser.zip'
I had another supersu.zip in my phone storage, tired installing it and got the same error.
When I tried doing a normal reboot into my system, it goes on a boot loop on the "your device is unlocked" screen and has been that way ever since.
What do I do now?
Should I try to re-flash TWRP and superuser with the right files, or should I restore stock recovery? I don't have any backup. (noob mistake)
I'd highly appreciate it anyone linked me the proper twrp and superuser or stock recovery files and if possible guided me on what to do.
PLEASE HELP ME.
thank you.
Click to expand...
Click to collapse
That won't help!
Best is that u should flash stock rom, since the phone is bootlooping...
U can find it here https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369
Flash it on bootloader screen via fastboot.
Do not relock the bootloader. Skip that step and also do NOT flash bootloader.img and partition. That can mess up the device.
once this is done, boot the device once... Finish the setup and then flash twrp.. Then flash ex kernel then flash any root Zip. (supersu, magisk or phhh's superuser)
Twrp can be found from here. https://forum.xda-developers.com/mo...p-twrp-3-0-2-2-recovery-moto-g4-plus-t3386586
abhi212b said:
That won't help!
Best is that u should flash stock rom, since the phone is bootlooping...
U can find it here https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369
Flash it on bootloader screen via fastboot.
Do not relock the bootloader. Skip that step and also do NOT flash bootloader.img and partition. That can mess up the device.
once this is done, boot the device once... Finish the setup and then flash twrp.. Then flash ex kernel then flash any root Zip. (supersu, magisk or phhh's superuser)
Twrp can be found from here. https://forum.xda-developers.com/mo...p-twrp-3-0-2-2-recovery-moto-g4-plus-t3386586
Click to expand...
Click to collapse
Thank you, will try this now.
Only the last SuperSU Beta defaults to systemless install. Any other ones require writing of a .SuperSU file to force systemless before rooting.
https://forum.xda-developers.com/mo...de-root-moto-g4-plus-supersu-android-t3587918
SSJGod said:
Thank you, will try this now.
Click to expand...
Click to collapse
If you have not done this already, you can give it a try by flashing the stock boot.img via twrp and see if that boots the device.
I am not sure that it will work since, i have not tried it.
Exact same thing with the XT1625. I have also found that the systemless method of rooting with SuperSU kills my wifi and cellular network's connection abilities, which might just be a standard G4 thing but the only way I know of to fix it is reflashing the OS (data wipe not necessary).
Just thought this might be helpful to anyone who ran into similar issues to the ones I had.
also i'm still having issues with the stupid thing actually rooting but i'm gonna try again some other day.
just_magikkal said:
Exact same thing with the XT1625. I have also found that the systemless method of rooting with SuperSU kills my wifi and cellular network's connection abilities, which might just be a standard G4 thing but the only way I know of to fix it is reflashing the OS (data wipe not necessary).
Just thought this might be helpful to anyone who ran into similar issues to the ones I had.
also i'm still having issues with the stupid thing actually rooting but i'm gonna try again some other day.
Click to expand...
Click to collapse
I think that is the kernel issue.. you should try EX.. and then use SuperSU or maybe use Magisk SU..
abhi212b said:
That won't help!
Best is that u should flash stock rom, since the phone is bootlooping...
U can find it here https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369
Flash it on bootloader screen via fastboot.
Do not relock the bootloader. Skip that step and also do NOT flash bootloader.img and partition. That can mess up the device.
once this is done, boot the device once... Finish the setup and then flash twrp.. Then flash ex kernel then flash any root Zip. (supersu, magisk or phhh's superuser)
Twrp can be found from here. https://forum.xda-developers.com/mo...p-twrp-3-0-2-2-recovery-moto-g4-plus-t3386586
Click to expand...
Click to collapse
Had the same problem as OP and this fixed it, thanks a lot man!
Good to hear now the phone is alive!