Hi
Earlier today I was running 7.0.0. Stock No root with unlocked bootloader, all of a sudden random reboots. Until it no longer wanted to go past Google screen. Plugged into nexus root toolkit, tried flashing stock, downgrading to marshmallow, locking bootloader, unlocking again, multiple times and tries with no luck. The device now will only allow me to get into bootloader when I plug it to charge and immediately press power & -volume. I would appreciate it any help I can get in this.
Thanks
roelmmata said:
Hi
Earlier today I was running 7.0.0. Stock No root with unlocked bootloader, all of a sudden random reboots. Until it no longer wanted to go past Google screen. Plugged into nexus root toolkit, tried flashing stock, downgrading to marshmallow, locking bootloader, unlocking again, multiple times and tries with no luck. The device now will only allow me to get into bootloader when I plug it to charge and immediately press power & -volume. I would appreciate it any help I can get in this.
Thanks
Click to expand...
Click to collapse
Just about everyone in this thread is in similar boat. I think there is one that was on 6.0, but most on npd90x I believe. There might be something useful to help you with. What version of twrp are you using? 3.0.2-1 has a bug with efs partition.
http://forum.xda-developers.com/nexus-6p/help/figure-brick-t3450921
Fe Mike said:
Just about everyone in this thread is in similar boat. I think there is one that was on 6.0, but most on npd90x I believe. There might be something useful to help you with. What version of twrp are you using? 3.0.2-1 has a bug with efs partition.
http://forum.xda-developers.com/nexus-6p/help/figure-brick-t3450921
Click to expand...
Click to collapse
I had tried to flash twrp but had gotten an error saying I wasn't in adb recovery and never got that to work.
roelmmata said:
I had tried to flash twrp but had gotten an error saying I wasn't in adb recovery and never got that to work.
Click to expand...
Click to collapse
You mean flash to install TWRP or you were trying to install via ADB and your phone wasn't in recovery? You flash the TWRP image to install it from your bootloader via fastboot commands. You can load other files onto your phone via ADB sideload while in recovery. It is helpful to be clear on the forums so people can better help.
Sent from my Nexus 6P using Tapatalk
ultyrunner said:
You mean flash to install TWRP or you were trying to install via ADB and your phone wasn't in recovery? You flash the TWRP image to install it from your bootloader via fastboot commands. You can load other files onto your phone via ADB sideload while in recovery. It is helpful to be clear on the forums so people can better help.
Click to expand...
Click to collapse
I had been trying to install twrp onto my phone through the toolkit, using the "root and install custom recovery option" but then it got the error and cancelled.
roelmmata said:
I had been trying to install twrp onto my phone through the toolkit, using the "root and install custom recovery option" but then it got the error and cancelled.
Click to expand...
Click to collapse
Again, without knowing what you have/haven't done in advance, it's hard to be of much help. To run ADB commands, you need to have USB debugging enabled on the device from settings. So, if you haven't done that, you can't do anything via ADB/fastboot and prior to that, I see you said you did have an unlocked bootloader.
Beyond those two things, which are reiterated within it, I'd strongly recommend following Heisenberg's guide at http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928 to do any flashing on your phone. This begins by ensuring you get a working version of the drivers installed to your machine via the Android SDK. Since your BL is unlocked, you should be able to flash TWRP via fastboot command. Also, ensure you are installing version 3.0.2-3, the latest 'unofficial' that is bug-free.
Fe Mike said:
Just about everyone in this thread is in similar boat. I think there is one that was on 6.0, but most on npd90x I believe. There might be something useful to help you with. What version of twrp are you using? 3.0.2-1 has a bug with efs partition.
http://forum.xda-developers.com/nexus-6p/help/figure-brick-t3450921
Click to expand...
Click to collapse
Thanks I try it out!
ultyrunner said:
Again, without knowing what you have/haven't done in advance, it's hard to be of much help. To run ADB commands, you need to have USB debugging enabled on the device from settings. So, if you haven't done that, you can't do anything via ADB/fastboot and prior to that, I see you said you did have an unlocked bootloader.
Beyond those two things, which are reiterated within it, I'd strongly recommend following Heisenberg's guide at http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928 to do any flashing on your phone. This begins by ensuring you get a working version of the drivers installed to your machine via the Android SDK. Since your BL is unlocked, you should be able to flash TWRP via fastboot command. Also, ensure you are installing version 3.0.2-3, the latest 'unofficial' that is bug-free.
Click to expand...
Click to collapse
Hey again
I used guide specifically to go back to stock, combined with a couple times of wiping in stock recovery I finally got the phone to boot up! However I've learned something new, the phone will only stay on if I'm plugged into charger, and as soon as it's unplugged it turns off. Any other suggestions?
Related
Hi,
Last night i was playing with my N4 (with some root applications) and an app asked for a reboot. I just pressed yes so that the phone will reboot (I have done this earlier without any issues). Suddenly the device doesn't boot up. My N4 is stuck at a black screen. While trying to boot up, the Google logo appears and then a black screen. It doesn't advance to the 'X' logo. I'm running on stock, rooted phone (used N4 toolkit by Wugfresh to root).
I'm able to boot into recovery although. I tried all the possible means, wiped cache, dalvik cache, did a factory reset, backed up the system and tried to restore the same. Nothing happened.
Then i tried the "Back to Stock" option in the N4 toolkit and chose the option "Soft-brick/Bootloop" to recover my N4. These are what happened:
Downloaded the 4.2.2 image from Google servers and tried to flash in the device with prior instruction from the toolkit. Everything went fine until the flashing process. In the last step the CMD window opens up saying it is unrooting and flashing stock and immediately it'll bring up a complete message saying the flashing is complete and to wait until the device boots up. But nothing happens again.
I tried the automatic flashing and on the downloading window it saying download failed and hash checks failed meaning its not downloading.
I searched all the possible threads in a day to find a similar problem but in vain. I'm not a noob but i'm too lazy . But i would do anything to bring my N4 back to life. Anyone please show me a direction.
In short:
Status: Soft-Bricked (guess so), black screen after Google logo
Version: Stock 4.2.2 (rooted+busybox+supersu+twrp)
Able to boot to recovering: Yes, bootable to recovery and bootloader.
Tried Nexus toolkit recovery: Yes but in vain.
Gave up: No and never, I'm searching and searching for answers and I'm worried if I'll end up in a hard brick. :crying:
Guys, please help.
Thank You!
Aghil
I'm just taking a wild guess here - I'm not responsible if anything bad happens, and you might want to wait to someone else seconds my suggestion in any case (although I can't imagine things getting worse as long as you flash N4 stuff). But have you tried flashing a new boot.img/reset kernel from recovery or via fastboot/toolkit?
ameinild said:
I'm just taking a wild guess here - I'm not responsible if anything bad happens, and you might want to wait to someone else seconds my suggestion in any case (although I can't imagine things getting worse as long as you flash N4 stuff). But have you tried flashing a new boot.img/reset kernel from recovery or via fastboot/toolkit?
Click to expand...
Click to collapse
Err...nope I haven't tried any and will wait until someone seconds you. Meanwhile I have wiped off the ROM through the option in recovery. Still will I be able to do what you said? Also if could direct me to a "how-to" thread would be great. Just that I don't wanna mess up again.
Also, is there a way to transfer a ROM to N4 through fastboot? So that I can install the ROM through TWRP.
aghilvr said:
Err...nope I haven't tried any and will wait until someone seconds you. Meanwhile I have wiped off the ROM through the option in recovery. Still will I be able to do what you said? Also if could direct me to a "how-to" thread would be great. Just that I don't wanna mess up again.
Click to expand...
Click to collapse
No, my suggestion would require that the ROM is still on the phone, so you should restore your ROM prior to my suggestion. And I'm by no means an expert (therefore the disclaimer), but I *think* that since it's a bootup problem, it could be solved by flashing a new boot.img (which is essentially flashing a new kernel to the system).
But yeah, let's see if others think this might help, haven't researched it, is at work right now. Just throwing in a suggestion, that's all...
Also, is there a way to transfer a ROM to N4 through fastboot? So that I can install the ROM through TWRP.
Click to expand...
Click to collapse
I *think* (again, I'm totally not sure about this, as I haven't tried it) that you can sideload a ROM via zip file from recovery, but since I haven't tried it I'm not sure - can anybody confirm???
EDIT: Chromium's suggestion is better, by pushing the ROM.zip to the device and flashing from recovery (check md5 first, just in case).
aghilvr said:
Also, is there a way to transfer a ROM to N4 through fastboot? So that I can install the ROM through TWRP.
Click to expand...
Click to collapse
Yes there is. Your nexus is not bricked and this is why you shouldnt use toolkits to do things. This is honestly an extremely easy and simple fix. Use adb to push a rom onto the n4.
Code:
adb push \path\to\rom.zip /sdcard
Boot into recovery, do a full wipe, and flash the rom.
You said you downloaded the Google images.
Just boot your phone into the bootloader and run the flashall.bat that is in the Google image folder.
Note this will probably fully wipe you're phone in the process
Sent from my Nexus 4 using xda app-developers app
try this it may help u this toolkit is damn easy to use :
http://forum.xda-developers.com/showthread.php?t=1995688
Okay, thanks guys. I'm on it. Will let you know when I'm done.
That same thing happened to me once. I had to extract the google file and look for the 4 img files(bootloader, system, userdata, recovery) and flash them with toolkit manually and it fixed it, but it erased everything on my sd
I tried to load the file "occam-jdq39-factory-345dc199.tar" into my phone using the ADB sideload feature in the toolkit. I don't have the SDK installed hence I depended the tool again. But now the tool only loads .zip file and not .tar as the one that i downloaded. Am I doing it right?
aghilvr said:
I tried to load the file "occam-jdq39-factory-345dc199.tar" into my phone using the ADB sideload feature in the toolkit. I don't have the SDK installed hence I depended the tool again. But now the tool only loads .zip file and not .tar as the one that i downloaded. Am I doing it right?
Click to expand...
Click to collapse
K if you have a custom recovery installed, there isnt much you need to do to fix the issue.
First setup adb/fastboot by reading this
Then boot the phone into recovery, and plug it into the computer. Open a new command prompt window and use adb like this:
Code:
adb push \path\to\rom.zip /sdcard
Then you can unplug the phone. From recovery go to the install menu, find the rom that you just pushed, and flash it.
chromium96 said:
K if you have a custom recovery installed, there isnt much you need to do to fix the issue.
First setup adb/fastboot by reading this
Then boot the phone into recovery, and plug it into the computer. Open a new command prompt window and use adb like this:
Code:
adb push \path\to\rom.zip /sdcard
Then you can unplug the phone. From recovery go to the install menu, find the rom that you just pushed, and flash it.
Click to expand...
Click to collapse
Okay, installing the SDK. And the command saying "rom.zip", the file that I have is like "rom.tar". Does it matter? I downloaded the rom from here https://developers.google.com/android/nexus/images
aghilvr said:
Okay, installing the SDK. And the command saying "rom.zip", the file that I have is like "rom.tar". Does it matter? I downloaded the rom from here https://developers.google.com/android/nexus/images
Click to expand...
Click to collapse
No the tar wont work through recovery. You should download a rom from here or here.
If you want to flash the stock rom through recovery you can download it here.
chromium96 said:
No the tar wont work through recovery. You should download a rom from here or here.
If you want to flash the stock rom through recovery you can download it here.
Click to expand...
Click to collapse
Oh that's why it didn't work all the time
Thanks chromium :fingers-crossed:
Hey thanks guys, my device is back to normal. Chromium a special thanks for you for helping me out. See you guys with my next problem/queris!
I tried to root my Nexus 6P and now I'm stuck. It won't finish booting. I followed instructions found on the web. I unlocked bootloader with no problem. I copied the latest SuperSU file to the phone. I installed TWRP recovery. However, I could not find the SuperSU file when using TWRP. Nevertheless, when I went to exit, TWRP asked if I wanted to instal SuperSU. I recall reading somewhere that it will install the wrong version of SuperSU (not the one for 6.0.1). Somehow I must have hit the wrong selection because it installed it anyway. Now I have an infinite loop.
I have tried to factory reset with TWRP. That fails. I downloaded the 6.0.1 images files from Google. I tried to run flash-all.bat, but that doesn't work. I have pushed images and ZIPs to the /sdcard/ folder with ADB. ADB recognizes the device, but fastboot does not (when connected to my laptop) (which is why flash-all doesn't work). I have tried to install the images/zips with TWRP. However, I always get "failed" messages. I get messages that partitions won't load.
Stupidly, I do not have a nandroid backup (yes, I know, a dumb move).
Any suggestions on what to try next? I'm at my wit's end with this. I've searched the web all morning and found all kinds of helpful info, but I can't find anything to get me past this point. I am perfectly willing to wipe it all out and start over again if I could just force it to do that. I just bought it so I suppose I could return it (I think there's a 30-day return policy), but Google might not like it if it comes back in this state, I suppose. I had an AT&T Galaxy Note 5 for half a day but found out, after the fact, that I can't root it.
Thanks for any help or suggestions.
Why did you follow instructions found on "Web" when u have the beautiful guide by our @Heisenberg? Read this thread. Instead of running flash - all. Bat file, follow the instructions in this guide. http://forum.xda-developers.com/showthread.php?t=3206928
jaidev.s said:
Why did you follow instructions found on "Web" when u have the beautiful guide by our @Heisenberg? Read this thread. Instead of running flash - all. Bat file, follow the instructions in this guide. http://forum.xda-developers.com/showthread.php?t=3206928
Click to expand...
Click to collapse
I saw that post. I wish I had followed it. However, the instructions are very similar to what I tried, although not exact. Where I went wrong is letting TWRP install SuperSU for me. I didn't mean to but when I touched the phone it installed it (of course, I hit something, but I don't know what). Fastboot does not recognize the phone in recovery. I can follow Heisenberg's instructions to get back to stock IF fastboot would recognize the phone. ADB recognizes the phone. Would it be possible to use ADB Sideload instead? How can I force fastboot to recognize the phone? If I could do that, I would be able to flash images back to the phone. Thanks!
U should try fastboot in bootloader / download mode instead of recovery mode..
OK, two comments: Duh (as I slap my head) and Bless You! That worked. I'm back to stock. At least the phone works now. I'll try again to root following Heinsenberg's instructions! Thanks. Where do I sent the beer money?
jaidev.s said:
U should try fastboot in bootloader / download mode instead of recovery mode..
Click to expand...
Click to collapse
Well, I'm back to a stock phone, anyway. Flashing SuperSU per Heinsenberg's instructions did not give me root. Oh well. I'll keep trying. It did install and it did reboot just fine. However, root checker says I have no root and Titanium Backup won't run, either. Thanks.
I mistakenly deleted my Nexus 6P internal memory with TWRP. Now my phone turns on and gets stuck at Google logo.
I am able to go to recovery mode but it reboots again and gets stuck at Google.
When I try to reboot it, it asks me "There is not OS, do you still want to reboot?"
I am able to go to CMD in Windows and when I try to unlock the bootloader, it gives my error "Remote: boot loader can't be unlocked".
Is there any way to install the OS from scratch even the bootloader is locked.
I am not able to access the internal memory of my phone on Windows computer and there is no TWRP on my phone anymore.
Any suggestions are greatly appreciated.
Thanks
I would recommend looking at this guide, section 10 or 11. It will get you back to stock and from there you can start over with the TWRP, rooting, etc... Hopefully it'll at least get you back to a bootable OS and you'll have something to work with...
Thanks
Thanks buddy. I will try it
You won't be able to use those sections of my guide with a locked bootloader so don't bother. Check out section 13 though, that involves using adb sideload and the stock recovery to flash one of the full OTA zips.
Heisenberg said:
You won't be able to use those sections of my guide with a locked bootloader so don't bother. Check out section 13 though, that involves using adb sideload and the stock recovery to flash one of the full OTA zips.
Click to expand...
Click to collapse
Yeah I figured out that with locked boot loader, it doesn't work. I will try to see section 13.
Thanks for the tip.
umer221 said:
Yeah I figured out that with locked boot loader, it doesn't work. I will try to see section 13.
Thanks for the tip.
Click to expand...
Click to collapse
No worries, let me know how you go.
Heisenberg said:
You won't be able to use those sections of my guide with a locked bootloader so don't bother. Check out section 13 though, that involves using adb sideload and the stock recovery to flash one of the full OTA zips.
Click to expand...
Click to collapse
I am in a similar situation. My bootloader is unlocked however i cant get abd or fastboot to see the phone. tried on windows and linux. any suggestions?
ppbatman said:
I am in a similar situation. My bootloader is unlocked however i cant get abd or fastboot to see the phone. tried on windows and linux. any suggestions?
Click to expand...
Click to collapse
What Linux distro are you using? And how did you install adb/fastboot on it?
Heisenberg said:
What Linux distro are you using? And how did you install adb/fastboot on it?
Click to expand...
Click to collapse
I used a mac, sorry about that had a brain fart when typing that post. Installed using a guide on xda. tested it with a nexus 5x and worked fine.
I've posted in a few places here on xda but no responses yet, please help! I've unlocked bootloader, rooted, installed twrp, tried to flash cm13 but had the wrong gapps, so it failed, I tried to wipe and restore a backup I made in twrp but it says my device is corrupt then halts at the Google logo. I think all I need is to push the correct gapps to the phone through adb but I can't get my stupid pc to recognize it anymore. I boot into twrp, plug it in to the pc, tried multiple tools and sdk adb route, but nothing works! I have all the drivers installed, and reinstalled, keep getting a Windows error "The procedure entry point WSAPoll could not be located in the dynamic link library WS2_32.dll"
I read somewhere that the ws2_32.dll is only available in Vista and up... I'm running xp, I wonder if that's my problem. Sorry for all the posts and long explanations, I'm just frustrated and need professional help
You could get that dll somewhere and add it to your windows. I never flashed under Win XP... Also, you could try to download the factory image (NRD90U) from google. Boot your phone on fastboot mode and flash all the .img one by one and should be back to stock... That should fix your problem hopefully!
How do I boot into fastboot mode? I can get to the ko'd android and select options and get into twrp, it says download mode disabled and connect usb data cable, which doesn't change when I plug it in but I see my serial under fastboot in the skipsoft tool kit. I mainly get that error message when using that tool kit too
wonton9224 said:
How do I boot into fastboot mode? I can get to the ko'd android and select options and get into twrp, it says download mode disabled and connect usb data cable, which doesn't change when I plug it in but I see my serial under fastboot in the skipsoft tool kit. I mainly get that error message when using that tool kit too
Click to expand...
Click to collapse
If you're running XP your pretty seriously out of date.
All of them say download mode disabled when you are in your bootloader. If you see the little droid on his back and the ascii device status in the bottom left corner of your screen you are in bootloader (which is fastboot 'mode' as you put it). Since it is returning your serial number it sounds like you're good.
I expect you may want to simply reflash the stock OS from your Skipsoft kit. Get it booted stock first, then install a custom ROM.
Ok thanks, got my bro here with his win 7 laptop, gonna try and see about pushing the correct gapps to the phone first, if I can't get adb to work when booted into twrp I guess I'll try the fastboot method to stock.
Is it safe to use the Skipsoft toolkit to flash stock Rom while I have twrp installed? And unlocked bootloader?
wonton9224 said:
Ok thanks, got my bro here with his win 7 laptop, gonna try and see about pushing the correct gapps to the phone first, if I can't get adb to work when booted into twrp I guess I'll try the fastboot method to stock.
Is it safe to use the Skipsoft toolkit to flash stock Rom while I have twrp installed? And unlocked bootloader?
Click to expand...
Click to collapse
If your device is currently borked, just start from scratch. If you flash the factory image partitions properly as per Heisenberg's guide then recovery is overwritten anyway. And, you can't flash anything unless your bootloader is unlocked. You would need to reflash TWRP and SuperSU after it first boots.
Sent from my Nexus 6P using Tapatalk
Thanks, I'm trying the skipsoft toolkit it's flashing the stock img now, I'll let ya know how it goes, fingers crossed!
wonton9224 said:
Thanks, I'm trying the skipsoft toolkit it's flashing the stock img now, I'll let ya know how it goes, fingers crossed!
Click to expand...
Click to collapse
I would suggest booting it up stock and letting it set up before flashing TWRP and then rooting. And if you do, when you flash TWRP via fastboot, boot right to recovery and flash SuperSU, otherwise TWRP will get overwritten by stock recovery. Rooting stops that.
Sent from my Nexus 6P using Tapatalk
I followed Heisenberg's guide with no problems the first time, it was all good before I was stupid and flashed a Rom with wrong gapps and tried to restore a backup, thanks tho, I really appreciate the help!
wonton9224 said:
I followed Heisenberg's guide with no problems the first time, it was all good before I was stupid and flashed a Rom with wrong gapps and tried to restore a backup, thanks tho, I really appreciate the help!
Click to expand...
Click to collapse
So you went through that and flashed the wrong Gapps pkg again? I may regret asking but what custom ROM are you flashing? There are really only debloated stock variants right now.
Sent from my Nexus 6P using Tapatalk
Not again, only flashed wrong gapps once, was trying to flash cm13 and got the gapps from opengapps.org. It's ask good now tho, I'm back to stock thanks to you guys and the skipsoft toolkit! Thanks again!
Dear all,
first of all I would like to be sorry if I'm saying something worng. I'm not so expert about Android world.
I've got a OnePlus 6T that I've rooted with the help of a friend some months ago.
Not it's a lot that I keep see the notification abount the OS update and I keep skipping it but it's bothering me so... I searched for a guide and I found this (https://oneplus.gadgethacks.com/how...thout-losing-root-no-computer-needed-0192638/) (I hope I can post it also if it's from another website).
It seems so simple, I've downloaded the OTA update, the TWRP and the Magisk. My issue is that whene I reboot to the recovery I'm not booting into TWRP but I suppose into the OnePlus recovery instead.
I searched angain and found this other guide (https://forum.xda-developers.com/oneplus-6t/how-to/official-oxygenos-9-0-4-ota-oneplus-6t-t3860953) that is more complete but I can't understand if it's the proper guide I need to follow to update my device keeping it rooted and most of all without loosing any data.
Thanks,
Riki
The first guide you linked to is wrong. Do not follow that. That is why you don't have TWRP anymore. The second guide you linked to on XDA is correct. Follow the TWRP guide. Once you have TWRP reinstalled.
You must download the zip from the second link you posted here at XDA.
Flash the Zip in TWRP. This flash the update to the opposite slot. It also wipes out TWRP and replaces it with the stock recovery.
Now you must reinstall TWRP. Flash the TWRP installer. This will flash TWRP to both slots.
Now reboot to recovery. This will reboot to the new slot where you update was just flashed.
This is when you install Magisk to the updated slot. You MUST do this.
Now reboot to system after you installed Magisk.
Now you have updated without losing any data.
The guide in the second link says to use the Magisk uninstaller. I've personally never done this. This is probably for people who use all sorts of weird add-ons and such. I don't know. Never uninstalled Magisk, never had a problem. That's all I can say. You can try it, or you can follow the official instructions.
OhioYJ said:
The first guide you linked to is wrong. Do not follow that. That is why you don't have TWRP anymore. The second guide you linked to on XDA is correct. Follow the TWRP guide. Once you have TWRP reinstalled.
You must download the zip from the second link you posted here at XDA.
Flash the Zip in TWRP. This flash the update to the opposite slot. It also wipes out TWRP and replaces it with the stock recovery.
Now you must reinstall TWRP. Flash the TWRP installer. This will flash TWRP to both slots.
Now reboot to recovery. This will reboot to the new slot where you update was just flashed.
This is when you install Magisk to the updated slot. You MUST do this.
Now reboot to system after you installed Magisk.
Now you have updated without losing any data.
The guide in the second link says to use the Magisk uninstaller. I've personally never done this. This is probably for people who use all sorts of weird add-ons and such. I don't know. Never uninstalled Magisk, never had a problem. That's all I can say. You can try it, or you can follow the official instructions.
Click to expand...
Click to collapse
Thanks OhioYJ,
so, before I can follow the TWRP guide, I must reinstall it. Could you please give me a link to a guide on how to do it?
Thanks again,
Riki
RikiBez said:
Thanks OhioYJ,
so, before I can follow the TWRP guide, I must reinstall it. Could you please give me a link to a guide on how to do it?
Click to expand...
Click to collapse
[Guide] OnePlus 6T [Fajita]: Unlock | Flash TWRP | Root | Nandroid & EFS Backup !!
Thanks to Funk Wizard again. Don't forget the section about backing up your modem, this is always important in case something really goes wrong. You'll probably never need it, but if you ever do you'll be really glad you have it.
OhioYJ said:
[Guide] OnePlus 6T [Fajita]: Unlock | Flash TWRP | Root | Nandroid & EFS Backup !!
Thanks to Funk Wizard again. Don't forget the section about backing up your modem, this is always important in case something really goes wrong. You'll probably never need it, but if you ever do you'll be really glad you have it.
Click to expand...
Click to collapse
I followed the guide but I get stucked into a loot without been able to boot into TWRP. I'm only able to enter the recovery mode and the fastboot mode but when I launch the command from Windows it finish with no error but the phone still stuck on the fastboot logo or the oneplus logo. After many tryes now I've got only this and also errors on PC:
Old_video_link_removed
EDIT: At the moment I'm not event able to enter the recovery mode, I keep restarting it and it will only boot to the fastmode.
RikiBez said:
I followed the guide but I get stucked into a loot without been able to boot into TWRP. I'm only able to enter the recovery mode and the fastboot mode but when I launch the command from Windows it finish with no error but the phone still stuck on the fastboot logo or the oneplus logo. After many tryes now I've got only this and also errors on PC:
https://youtu.be/7Re-p7Z1yhc
EDIT: At the moment I'm not event able to enter the recovery mode, I keep restarting it and it will only boot to the fastmode.
Click to expand...
Click to collapse
It's booting into recovery, but the OnePlus recovery. That is what the menu that is asking you to select a language is. When you enter the command fastboot boot trwp.img you don't get any sort of error? Or the phone doesn't respond?
OhioYJ said:
It's booting into recovery, but the OnePlus recovery. That is what the menu that is asking you to select a language is. When you enter the command fastboot boot trwp.img you don't get any sort of error? Or the phone doesn't respond?
Click to expand...
Click to collapse
At the beginning I had no error nor on PC not on phone. Now that I’m stuck into the fastboot I keep getting the error on windows that say he donno the fastboot command but the phone stand still.
RikiBez said:
At the beginning I had no error nor on PC not on phone. Now that I’m stuck into the fastboot I keep getting the error on windows that say he donno the fastboot command but the phone stand still.
Click to expand...
Click to collapse
Is fastboot installed? Are you typing the commands correctly?
Sent from my OnePlus 6T using XDA-Developers Legacy app
RikiBez said:
At the beginning I had no error nor on PC not on phone. Now that I’m stuck into the fastboot I keep getting the error on windows that say he donno the fastboot command but the phone stand still.
Click to expand...
Click to collapse
Sounds like you're not running the command from the folder where fastboot.exe is located.
Makes me wonder why you did it this way in the first place. And why people suggested it. Easiest way to install updates on a rooted 6T is to install the update through the normal updater without rebooting, going to Magisk Manager and selecting install to inactive slot and rebooting only after that. That's really all there is to it.
CazeW said:
Sounds like you're not running the command from the folder where fastboot.exe is located.
Makes me wonder why you did it this way in the first place. And why people suggested it. Easiest way to install updates on a rooted 6T is to install the update through the normal updater without rebooting, going to Magisk Manager and selecting install to inactive slot and rebooting only after that. That's really all there is to it.
Click to expand...
Click to collapse
If I want to clean flash my 9.0.13 rooted TWRP. What do I need to uninstall or wipe? Im on 9.0.13 currently
Sent from my OnePlus 6T using XDA-Developers Legacy app
i7vSa7vi7y said:
Is fastboot installed? Are you typing the commands correctly?
Sent from my OnePlus 6T using XDA-Developers Legacy app
Click to expand...
Click to collapse
Fastboot was working until I reinstalled adb and OnePlus drivers.
CazeW said:
Sounds like you're not running the command from the folder where fastboot.exe is located.
Makes me wonder why you did it this way in the first place. And why people suggested it. Easiest way to install updates on a rooted 6T is to install the update through the normal updater without rebooting, going to Magisk Manager and selecting install to inactive slot and rebooting only after that. That's really all there is to it.
Click to expand...
Click to collapse
I didn’t know any other way. That’s why I asked how to do it. Anyway I’m running the command from the right folder. Maybe something broke on my laptop.
Yesterday evening I tried from a new laptop windows 10, installed adb and OnePlus driver for the first time and I was able to run the commands without the error not finding the command but:
Fastboot boot twrp.image returned me an error
If I run fastboot flash boot twrp.image it does not give me error but the phone does not response. It only boot to the boot loader.
RikiBez said:
I didn’t know any other way. That’s why I asked how to do it. Anyway I’m running the command from the right folder. Maybe something broke on my laptop.
Yesterday evening I tried from a new laptop windows 10, installed adb and OnePlus driver for the first time and I was able to run the commands without the error not finding the command but:
Fastboot boot twrp.image returned me an error
If I run fastboot flash boot twrp.image it does not give me error but the phone does not response. It only boot to the boot loader.
Click to expand...
Click to collapse
Try uninstalling adb. Delete the whole folder and install it again. Try updating your netframework on your PC and the latest C++
Sent from my OnePlus 6T using XDA-Developers Legacy app
I'm creating a new tread about the issue and the state where I am because now I can't update or keep data, I just need to recover the phone to a normal state.
RikiBez said:
I'm creating a new tread about the issue and the state where I am because now I can't update or keep data, I just need to recover the phone to a normal state.
Click to expand...
Click to collapse
Use the msm tool for that
Sent from my OnePlus 6T using XDA-Developers Legacy app
Flashing the fastboot rom would probably have gotten you back in and maybe with your data in tact. Now fair warning I'm a Linux user anyways, but really fastboot and adb are so much easier in Linux. For people that have issues, it sometimes is easier just to make a bootable USB / CD of Linux Mint or Ubuntu and then from Synaptic or the Package manager install adb and fastboot. No drivers or anything else to install, everything will just work.
Last time I got stuck in fastboot I just used the fastboot ROM to get back to bootable.
OhioYJ said:
Flashing the fastboot rom would probably have gotten you back in and maybe with your data in tact. Now fair warning I'm a Linux user anyways, but really fastboot and adb are so much easier in Linux. For people that have issues, it sometimes is easier just to make a bootable USB / CD of Linux Mint or Ubuntu and then from Synaptic or the Package manager install adb and fastboot. No drivers or anything else to install, everything will just work.
Last time I got stuck in fastboot I just used the fastboot ROM to get back to bootable.
Click to expand...
Click to collapse
Those fastboot roms have sure saved me from raging before
I would also recommend using migrate, it's in the play store and it backs up all your data and then puts it in a flashable zip
i7vSa7vi7y said:
If I want to clean flash my 9.0.13 rooted TWRP. What do I need to uninstall or wipe? Im on 9.0.13 currently
Sent from my OnePlus 6T using XDA-Developers Legacy app
Click to expand...
Click to collapse
Do a factory reset from TWRP and flash the full ROM.
One best method...and the method that works 100% tested for upgrading a rooted OOS to new OOS version without any loss of data, without any issues.
I'll mention the guide that I have used to upgrade from 9.0.12 rooted to 9.0.13 rooted. Without any loss of data
Download latest OOS full ROM
Boot to TWRP
Flash OOS 9.0.13
Flash TWRP installer zip
Reboot system
Phone will boot.
Now go back to recovery mode
Flash Magisk if u want root again
Done
No confusion. No data loss. Not being stuck. Sweet and Simple.
sanjeev7 said:
One best method...and the method that works 100% tested for upgrading a rooted OOS to new OOS version without any loss of data, without any issues.
I'll mention the guide that I have used to upgrade from 9.0.12 rooted to 9.0.13 rooted. Without any loss of data
Download latest OOS full ROM
Boot to TWRP
Flash OOS 9.0.13
Flash TWRP installer zip
Reboot system
Phone will boot.
Now go back to recovery mode
Flash Magisk if u want root again
Done
No confusion. No data loss. Not being stuck. Sweet and Simple.
Click to expand...
Click to collapse
So I don't have to wipe my system data or anything. I heard some people had the problem of getting stuck or that there was a red warning screen that popped up when booting, and I'm not talking about the bootloader message. I'm currently on 9.0.11. Also should I download the latest version of TWRP or should I use the one I'm using currently. Don't wanna mess anything up. Another guide I read said I should flash the oos rom, then TWRP, than magisk