So this may be a silly question, but I've just received the T-Mobile MDA (HTC Wizard) second-hand and without a charger.
The Mini USB port on the bottom allows ActiveSync and charging from my notebook's USB port, but when I try to charge using an AC-to-USB adapter it doesn't work... I've tried two different Motorola phone chargers and a generic one that came with my Jawbone that has a USB female connector on the adapter and you supply your own USB cable. I've used the same cable I was using when attaching to the PC, but no luck.
Interestingly enough, I did get it to charge with the same USB cable once at an airport by plugging it into the Southwest Airlines chairs with the USB power plugs...
So does anyone know? Does this phone require a special sort of charger?
you need a charger that is rated 1.0Amps.
usb is normally 500mAmps, not enough to charge your phone.
Probably a daft question!
Is there any reason I cannot use a "stock" non HTC usb cable for syncing / charging. Is the HTC cable any different to any others e.g. Nokia?
Surely one cable is the same as another!?!
You can use ANY USB/microUSB Data/Charge Cable ;-)
I also do so :-D
no, charging doesn't really works, not for most cables. Unless it is explicitly marked for HD2 or iPhone. It seems they follow a new specifications. Older cables do not carry as much current. With connected to PC via a third party cable, my HD2 pops up a screen saying that the charging current is insufficient.
You can use any USB 2.0 A Male to Micro 5pin Male. Basically the typical USB to micro USB cable. I'm using a Blackberry micro usb cable (plugged into laptop) to charge my HD2 at work.
Usually sells for $2-3, or less, for 1-2 feet cable. Overpriced if you pay more. I bought the BB cable from Amazon, though I usually buy cables from monoprice.com.
i have a cable that comes with the car charger that charges the device when connected to the pc but cannot be used to sync files. when connected through this cable, the pc does not recognize it at all as an external device as it recognizes a dvd, cd, etc. in its driver.
I'm using a Blackberry cable in the office and works like a charm; I have the original at Home.
I installed it in my dash and removing it is a pita it was working perfectly fine but for some reason it wasnt showings charge or turning off or on with the car it just stays on i tried restart nothing happens i tried unplugging usb from powergen and plugging back in no result
Also if i go to usb rom under fixed installation i am able to check box and uncheck also did nothing
I am using nexus 7, timurs usb rom, otg cable, original charging cable and powergen usb charger
Please help thanks
Anyone???
I'm also using Timur's kernel with USB ROM for my car installation. I know that it can be very picky on the order the USB plugs are added (data and power). It may seem simple but remove the the OTG cable from the tablet and remove both the data and power legs from the OTG as well. The follow the order listed by Timur on his website:
To activate charging, you must first connect your external power supply to your OTG Y-adapter - then plug the OTG adapter into your Nexus 7 - and then connect any slave devices.
Click to expand...
Click to collapse
Hopefully that should get you back up and working. I completely understand how frustrating it is to have everything plugged in and see that tablet isn't charging, especially when its difficult to get to the Nexus itself.
does anyone have a easy charging solution these car chargers dont work
and a good otg y cable
You could try using a power inverter which will give you a standard US plug from the cigarette lighter. From here, you could plug in a regular outlet adapter. I found this to work pretty well with my own set up and managed to get one pretty cheap at Walmart. As for a good OTG y cable, your best bet is probably to go on Amazon and find one with a lot of good reviews. They can vary in quality and some of the cheap ones I've gotten from China have flaked out after a short time and little use.
Sent from my Nexus 7 using xda app-developers app
Not seeing usb power
I had the same issue. I was using a 90 degree adapter into an OTG cable and my n7 wouldn't go into fixed install mode. Turns out my adapter cable was stopping the n7 from recognizing power. I removed the 90 degree adapter and plugged straight to otg and it worked as advertised. The issue was found during my bench testing on a 12v powersupply. I still have to find a 90 degree otg cable that will work.
So... try a different cable or if you have an adapter between the otg y cable, that may be the issue.
Hey, i just received my usb 3 cable (my s5 came with usb2...) and i think i got a fake one...
I bought it from here: ebay.com/itm/291161252997?var=590311054317&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Now the problem is, when i plug cable in it USB options there is no "Media device (USB 3.0)" option... Which if i am not mistaken should appear?
I don't understand... 190 cables sold and no one is complaining... Maybe i am doing something wrong?
You might connect it to a USB 3.0 Port, are you sure that you connected it in 3.0 port?
Velcis Ribeiro said:
You might connect it to a USB 3.0 Port, are you sure that you connected it in 3.0 port?
Click to expand...
Click to collapse
Yes i am sure i connected to usb 3.0 port. I just found out that my external monitor connected via usb using same type cable as i ordered (but it's very short cable) and it is usb 3.0. Tried connecting with it and now i can see that option. So i guess that means i got fake cable...
trajektorijus said:
Yes i am sure i connected to usb 3.0 port. I just found out that my external monitor connected via usb using same type cable as i ordered (but it's very short cable) and it is usb 3.0. Tried connecting with it and now i can see that option. So i guess that means i got fake cable...
Click to expand...
Click to collapse
Based from my experience, buying micro USB charging/data cable for Samsung is tricky since the wiring may not be the same as the normal USB cable. There should be 5 pins on the micro end, but sometimes there are just 4. But Samsung uses only 4 pins that might have been rewired. I'm not sure whether only Samsung does this or the same can be said of the other brands, but they may be the cause why there are microusb cables being sold that does only charging and no data function, and vice versa. And sometimes the pins may not be protruding out enough to make contact with the phone's charging pins.
I hope this helps.
You should try plugging in another USB 3.0 device such as a USB stick to determine whether the fault lies within your computer or the eBay cable!
Hello
Apologies if this has been asked before. I can't find a definitive answer...
Has anyone managed to get access to an USB memory stick on the OnePlus 2 actually working?
I've just received my OnePlus 2 and have rooted it etc. I have bought a couple of USB type C to USB A female sockets, both claiming to support OTG. However, neither of them appear to work. I've tried with a number of different USB sticks, some of them with indicator LEDs on them. When plugging them in, the LED indicator stays off and there is no extra drive in settings/storage, even after ticking the OTG check box.
I have booted to TWRP recovery and tried to mount the OTG storage. The phone vibrates and the check box immediately disappears...
I'm not sure if I'm missing something here!
The two items I have tried are:
1. http://www.amazon.co.uk/gp/aw/d/B00VGF2UPQ
2. http://m.belkin.com/uk/p/P-F2CU036/
Thanks for your time
Dan
Sent by my 1+1 via Tapatalk
Similar situation with me too:
So I have both of these adapters:
http://www.amazon.co.uk/gp/product/B00W5BL1N2?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
http://www.amazon.co.uk/gp/product/B00XLF1BZ4?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
Neither seem to work for me? I am trying to connect to a flight control board, so using a normal USB -> Micro USB, but the boards in question do not receive any power, nevermind data!
Any ideas?
Grr....
it seems that the problem is that does not support USB 3.1 (and do not know if not 3.0), the adapter must be old (not blue)
Both the OTG adapters I have support USB 2.0/3.0 and 3.1, but neither of them work.
What you are saying is you need a USB Type-C 2.0 adapter? Not seen those anywhere, are you sure they exist?
Same here. Doesn't work, using an adapter with a micro USB OTG cable doesn't work (this combo cable/Kingston USB 3 key works very well with OPO)
And it doesn't work either with this OTG cable
http://www.amazon.fr/dp/B011BASJQ4/ref=pe_386181_51767671_TE_dp_1
i tried a usb 2.0 otg with a micro usb to usb type c adapter on a usb 2.0 flash drive and still no luck getting the otg to work
I am using the oneplus adapter and it reads the otg but is stuck on checking it for errors.
Alaris said:
I am using the oneplus adapter and it reads the otg but is stuck on checking it for errors.
Click to expand...
Click to collapse
What cable is that? OnePlus only have a Micro USB one?
Addicteddddd said:
What cable is that? OnePlus only have a Micro USB one?
Click to expand...
Click to collapse
I am using the micro to type c adapter and plugging it into my otg cable.
Sent from my ONE A2005 using Tapatalk
Stupid question but did you guys enabled otg option in your storage settings. I just received my Oneplus 2 yesterday and I saw that setting and enabled it. I am still waiting for OPO's C adapter that's out of stock on Amazon India and only then I can verify whether that really does make a different or not.
nicesoni_ash said:
Stupid question but did you guys enabled otg option in your storage settings. I just received my Oneplus 2 yesterday and I saw that setting and enabled it. I am still waiting for OPO's C adapter that's out of stock on Amazon India and only then I can verify whether that really does make a different or not.
Click to expand...
Click to collapse
Yes, read the end of the 1st post...
I've now tried with OTG micro usb adaptors that work with other phones and a C->micro usb cable. Nothing works [emoji22]
Sent from my ONE A2003 using Tapatalk
I've just tested this adapter from this brand PQI... it's USB 3.1 Type-C to USB Type-A female. OTG works, but I am unable to eject my flash drive in ES Explorer...
Other than this, my no-brand USB Type-C to USB Type-A cable adapter doesn't work for OTG...
Guys has anyone tried this www.aliexpress.com
they have original oneplus Type-C Adaptor for $8.99 USD with free shipping (to india dont know about other country).
Click here
they also have
Xiaomi Micro USB to Type-C Type C Adapter for $3.99 USD with free shipping (to india dont know about other country).
here
Edit : I Tried this and received an original oneplus adaptor, I recommend this site.
Regards,
Shailesh
I've got similar issues. Tried using a proper Duo USB flash drive (USB one side..and Type-C on the other) and nothing. Tried OTG cable that I got online...and it fails to detect.
http://www.ebuyer.com/717886-datatraveler-microduo-64gb-3c-usb-3-1-dtduo3c-64gb
was the USB stick (which in every single way should work...without any kind of OTG adapter/whatever.
and then...
http://www.ebay.co.uk/itm/201444248140
which says it supports the OnePlus 2.
It's not looking good....
Cheap Type-C Adapter with OTG support.
Hey Guys for people in India, i found a cheap Type-C Adapter with OTG support.
i bought it and can confirm that OTG works.
Here is the links.
This has adapter & USB-A to micro USB
And
This Link is Just adapter
Edit:
i ordered this product again for my friend but it didn't work. I wouldn't recommend buying this anymore.
Click Thanks If this helps
shailm_85 said:
Guys has anyone tried this www.aliexpress.com
they have original oneplus Type-C Adaptor for $8.99 USD with free shipping (to india dont know about other country).
Click here
they also have
Xiaomi Micro USB to Type-C Type C Adapter for $3.99 USD with free shipping (to india dont know about other country).
here
Regards,
Shailesh
Click to expand...
Click to collapse
I order this one on October 31st. I'm still waiting for it. I don't have very high hopes that it will work....
http://www.aliexpress.com/snapshot/7018279289.html?orderId=70271999865589
Description doesnt say anything about OTG.
But lets see what happens, good luck.
Any Luck?
I have tried all sorts of OTG cable, from the original OTG cable with powered up 1Tb storage.... None of them work... However they all work on my OPO...
arbolarc said:
I have tried all sorts of OTG cable, from the original OTG cable with powered up 1Tb storage.... None of them work... However they all work on my OPO...
Click to expand...
Click to collapse
My 2tb storage worked with mi c adapter but it shows only the first partition but I have two positions, so I am gonna make it one amd use it that way.
Sent from my "GT-I9300/1+2" powered by Carbon/Blisspop Rom & Boeffla/ak Kernel
Fueled by 7000mAh ZeroLemon Battery
nicesoni_ash said:
My 2tb storage worked with mi c adapter but it shows only the first partition but I have two positions, so I am gonna make it one amd use it that way.
Sent from my "GT-I9300/1+2" powered by Carbon/Blisspop Rom & Boeffla/ak Kernel
Fueled by 7000mAh ZeroLemon Battery
Click to expand...
Click to collapse
What do you mean by the c-adapter? How do you connect it? C-adapter connect to an OTG? Or the OTG is integrated with c-adapter in it?
Cus I bought a separate c-adapter then connect to my micro USB OTG cable..