Related
hi
Sorry for my English
I wanted to root my phone but made a mistake somewhere.
now the phone is always off. when connected to the computer, program RSD see him as QHSUSB_DLOAD; computer see him as Qualcomm HS-USB QDLoader 9008
RSD don`t flasing(The phone failed to switch to fastboot mode)(FAIL) flasing cabl dont helped.
How reestablished bootloader
nobody knows how to help me?
It appears that you have a corrupt boot loader and unfortunately we do not have any of the files available to us that would be needed to fix your phone.
They would be the proprietary binaries and low level boot images from Qualcomm for flashing to a new board at the factory.
We have such repair kits for some earlier OMAP based devices but I have not heard of or seen any such files for the Qualcomm S4 devices, sorry.
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
kaskoraja said:
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
Click to expand...
Click to collapse
how?
same problem
i have the same problem and the same brick. Can anyone help us?:crying:
+ to brick reason
Ral126 said:
i have the same problem and the same brick. Can anyone help us?:crying:
Click to expand...
Click to collapse
You forget, thats you also try to flash MIUI!
St.Noigel said:
You forget, thats you also try to flash MIUI!
Click to expand...
Click to collapse
Yes) I tried))) But for the beginning i need to reestablished bootloader.
ASUS PadFone 2 QHSUSB_DLOAD error
I've an ASUS Padfone 2 with the same error. Looks like it's kind of easy to get these Qualcomm devices into this f*cking issue
My case is detailed here: http://forum.xda-developers.com/showthread.php?t=2220775
kaskoraja said:
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
Click to expand...
Click to collapse
Good evening,
I bricked the Innos D9 because I installed 2 new roms .........
I first stalled the DNS and it was a very nice rom but I was not 100% happy ...........than I installed the Cloudfone rom and this was very bad..........than I wanted to go back to the DNS rom and I got the same problem as yours.
I searched for a solution and I found a video on YouTube ..." Restore Acronis Backup on CloudFone Thrill 430X (Innos D9) " and after this experiment my Innos D9 is totally dead.....it isn't recognized by the computer ....not even by clicking or holding any button ..........when I connect the USB to my laptop I can only hear the sound that something has been connected to the laptop ........but nothing is visible.
any help to unbrick my phone?
One thing you could try is sending a message over to Josh at mobiletechvideos.com and see if he can help. It looks like they offer JTAG repairs for hard bricks(link).
Note: I don't work for mobiletechvideos or anything. I just had my Samsung Focus power button repaired by them a couple weeks ago and they did a pretty nice job.
I've got same problem with Asus Padfone A66.
I installed the qualcomm drivers, and QPST program is see my phone, but i have no idea howto use this program, or howto convert image files to (proper) .hex format, or howto build needed files. My cpu is MSM8260 and QPST see my phone as Q/QCP-XX (Download). And maybe I need for a proper MPRG8260.hex and aml, mbm files for flashing. so QPST sjust throwing error, ahnd happen nothing.
http://forum.xda-developers.com/showpost.php?p=45548210&postcount=3
Hello everyone, I'm having the same problem .
Someone found a solution to this problem?
I have a RAZR HD .
Thank's
does anyone know how to unbrick a hard-bricked zte blade g v880g? it has Qualcomm Snapdragon S4 Play (MSM8225) prossesor.
ntouris3 said:
does anyone know how to unbrick a hard-bricked zte blade g v880g? it has Qualcomm Snapdragon S4 Play (MSM8225) prossesor.
Click to expand...
Click to collapse
Thread moved to proper forum
If you can get the thing to go into fastboot (by pressing whatever button combination is appropriate for your specific device) and provided you have a backup of the partitions you damaged you can use fastboot to reflash the damaged partitions.
Google search for "[Guide] de-bricking a ZTE Blade - ZTE Blade / Libra ROMs & ROM" that will have various scenarios for debrikcing.
well... I didn't manage to get into fastboot but I managed to download a flasher! I connected my phone and it started installing things but it always stuck on ''wait reset''................................
ntouris3 said:
well... I didn't manage to get into fastboot but I managed to download a flasher! I connected my phone and it started installing things but it always stuck on ''wait reset''................................
Click to expand...
Click to collapse
Sometimes it is necessary to erase flash partitions before flashing them ... not sure if this is your issue but be warned that you could make things worse by doing so.
Can your phone start into ant of the other modes: recovery, field test or download mode ? if is can make sure you don't further damage the relevant partitions + the boot loader and whatever is used before the boot loader.
I've a snapdragon 600 based devel board and there are 2 stages of primary boot loader before LK ... not sure for your soc but make sure you don't dammage them if they are OK.
My is is hard bricked... I cant get into any mode... The only thing i can do is just to connect it to my pc ... And it is recognized as forge hs-usb qdloader 9008..... I found a program at androidbrick.com that may help but i cant use it because it is protected with a pssword that i dont know...
ntouris3 said:
My is is hard bricked... I cant get into any mode... The only thing i can do is just to connect it to my pc ... And it is recognized as forge hs-usb qdloader 9008..... I found a program at androidbrick.com that may help but i cant use it because it is protected with a pssword that i dont know...
Click to expand...
Click to collapse
I see people asking for the password on their forum ... regiter yourself there and ask for the password like the other users. If I knew it I'd give it to you
I'm not allowed to post links ... I'd point you to the url where people are asking for the password if I could.
Try searching with google : "Ultimate Qualcomm Snapdragon Unbrick Guide"
Thank you really much!
Sent from my Q8H-V1.0 using XDA Free mobile app
i need flash files for SP tool or files for MiFlash tool, for ZTE BLADE G V880G .
my phone not responding. there is not boot , recovery....
PC device menager see my phone like Qualcom HS-USB QDloader 9008 (COM5)
Thanks
sinbaj said:
i need flash files for SP tool or files for MiFlash tool, for ZTE BLADE G V880G .
my phone not responding. there is not boot , recovery....
PC device menager see my phone like Qualcom HS-USB QDloader 9008 (COM5)
Thanks
Click to expand...
Click to collapse
Mine too but i dont think you can flash via Sp tools this phone because its qualcomm not mediatek!
i used QPST and QXDM tool for unbreak the phone but i need flash files.:crying:
I find BIN file for full flash. zte_v955_full_riff.7z :angel:
which program i can use to flash with BIN file?
Im stuck there too bro
Qfil files for ZTE Blade g v880g ??
Hello,
My phone is Asus zenfone max-ZC550KL-16GB with 8916 cpu.
My phone's bootloader is damaged after flashing some .zip file.Now it's fully dead.
Not showing bootlogo,no recovery mode,no edl & no csc.It's just detecting as "QUALCOMM HS-USB QDLoader 9008 in PC.I downloaded QUALCOMM FLASH IMAGE LOADER(QFIL) but i can't find neccesary files for flashing(i.e., .mbn,rawprogram.xml,patch.xml suitable files for my phone's CPU).
Can anyone help me to unbrick my phone?
hi i,m facing this same problem i try my level best to flash stock os on it but it,s not turn on not charging no led lights indicates
a few weeks ago reverse charging popup is show again and again can,t see movie on the device to fix that i try to change the os
i just switch off the device from twrp after wipe dalvik ,catch and data the i try to turn it on but it,s not
if you find any way please inform me it,s very urgent ([email protected])
Christy2375 said:
hi i,m facing this same problem i try my level best to flash stock os on it but it,s not turn on not charging no led lights indicates
a few weeks ago reverse charging popup is show again and again can,t see movie on the device to fix that i try to change the os
i just switch off the device from twrp after wipe dalvik ,catch and data the i try to turn it on but it,s not
if you find any way please inform me it,s very urgent ([email protected])
Click to expand...
Click to collapse
You can't flash Stock ROM with TWRP, you should try flashing other ROM.
shirofficial said:
You can't flash Stock ROM with TWRP, you should try flashing other ROM.
Click to expand...
Click to collapse
hi my phone is total dead not charging not turning on no led indication i try my level best if u have a solution please inform me
because i don,t have a phone and don,t have enough money to buy a new phone
Idem... No solution?
Fix for dead ASUS Zenfone Max
Try holding down the power button and continuously press volume up (+) button. Hopefully this will take you to Downloader Mode.
---------- Post added at 04:45 PM ---------- Previous post was at 04:44 PM ----------
rkish0258 said:
Hello,
My phone is Asus zenfone max-ZC550KL-16GB with 8916 cpu.
My phone's bootloader is damaged after flashing some .zip file.Now it's fully dead.
Not showing bootlogo,no recovery mode,no edl & no csc.It's just detecting as "QUALCOMM HS-USB QDLoader 9008 in PC.I downloaded QUALCOMM FLASH IMAGE LOADER(QFIL) but i can't find neccesary files for flashing(i.e., .mbn,rawprogram.xml,patch.xml suitable files for my phone's CPU).
Can anyone help me to unbrick my phone?
Click to expand...
Click to collapse
Hold down the Power button and continuously press volume up(+) button, this will take you to download mode
rkish0258 said:
Hello,
My phone is Asus zenfone max-ZC550KL-16GB with 8916 cpu.
My phone's bootloader is damaged after flashing some .zip file.Now it's fully dead.
Not showing bootlogo,no recovery mode,no edl & no csc.It's just detecting as "QUALCOMM HS-USB QDLoader 9008 in PC.I downloaded QUALCOMM FLASH IMAGE LOADER(QFIL) but i can't find neccesary files for flashing(i.e., .mbn,rawprogram .xml,patch .xml suitable files for my phone's CPU).
Can anyone help me to unbrick my phone?
Click to expand...
Click to collapse
bro i too got in to this trouble after flashing stock in recovery ,a total dead , but its says that the qualcomm bulk loader port is for last chance of saving the phone ,and this is the qfil rom here {{{{{{ht tps://www .firmw are27 .net/2017/10/asus-zenfone-max-z010d-zc550kl-firmware .h tml}}}}}}}
but idk i cant reach in to those files ,bro u gotta check this out
check if its worked for u
https://drive.google.com/file/d/0B0ul1vuE3yJwUjVpSDJMbUJZanc/view
flash with qfil in 9008 mode
its for 8939
https://drive.google.com/file/d/0B0ul1vuE3yJwbTNScXhDYkx6cW8/view
for 8916
thanks bro ?? it worked bro , at last dead to alive
kichukic said:
thanks bro it worked bro , at last dead to alive
Click to expand...
Click to collapse
I am in same situation bro
While following these steps....
In QFIL, after clicking download
An error occurred,
Download failed: Switch To Emergency Download mode failed...
Google it and found to remove battery before connecting usb for lenovo phone.
Please help me... How you make it worked for non removable battery zenfone max:crying:
Yeah , many of em posting about it not recovering but some how mine has recovered with out any errors there , bro what about your cpu ??
krishnasmidhun said:
I am in same situation bro
While following these steps....
In QFIL, after clicking download
An error occurred,
Download failed: Switch To Emergency Download mode failed...
Google it and found to remove battery before connecting usb for lenovo phone.
Please help me... How you make it worked for non removable battery zenfone max:crying:
Click to expand...
Click to collapse
provide detail of ur phn ..
Sent from my Redmi Note 5 Pro using Tapatalk
kichukic said:
Yeah , many of em posting about it not recovering but some how mine has recovered with out any errors there , bro what about your cpu ??
Click to expand...
Click to collapse
Its asus zenfone max msm 8916. I have a feeling that is there any differnce in using windows 7 and windows 10??
What you guys are using while flashing with qfil? 64bit 86 bit are playing something??
---------- Post added at 09:50 AM ---------- Previous post was at 09:44 AM ----------
krishnasmidhun said:
Its asus zenfone max msm 8916. I have a feeling that is there any differnce in using windows 7 and windows 10??
What you guys are using while flashing with qfil? 64bit 86 bit are playing something??
Click to expand...
Click to collapse
Sometimes the error is firehose failed then on nxt couple of tries it is SDL fail
!!!
Well some times administration matters , on my first try i got a firehose error
Then i granted administration and everything goes well , if u got any error google those errors, thats what i did cause finding fixes for asus max is tough in xda especially which is in this condition
Hello,
I have similar problem with my ZC550KL. I downloded the 8916 firmware, but when I try to download usin qfil I got sahara fail message. Please share some brief instruction how to solve this.
Tnank you!
For all those who recovered there phone,does you last your IMEI number in the process??I lost mine,does your bootloader got locked
pranshaks said:
For all those who recovered there phone,does you last your IMEI number in the process??I lost mine,does your bootloader got locked
Click to expand...
Click to collapse
Do you have your efs?
Hello, I had a very little progress. I gave up about my asus zenfone max a year ago but glad that now looks like there's a hope in reviving my phone. I was able to download the right files to flash with QFIL. Most people here say that their PC detected QUALCOMM HS-USB QDLOADER 9008 but mine detect it as QUALCOMM HS-USB DIAGNOSTICS 9006. Due to excitement, I flashed it anyway and it created some memory partition on my hard drive whenever I plug the phone but QFIL gave me an error of :
** Download Fail: Switch To EDL Fail Failed to switch to Emergency Download Mode
I tried to google this error, some encountered it and was able to get a resolution by just removing the battery before plugging it in but our zenfone is with non removable battery. I have no luck yet. Anyone got suggestions ?
Unfortunately I have flash wrong Img to my Black shark 2 Global (SKW-HO) ,Now device have no screen , hardbracked, PC recognize under Com port as HS_USB Diagnostics 9008 mode, how to get back alive please
I realy want back to life, I have another working phone in hand as will, Need Help to get backup and restore to my bracked device. can some one guid me how to backup EDL mode Flashable Rom,
thanks in advance
I'm sorry mate but unfortunately, there's no official ROM available to flash via EDL mode. Even fastboot ROM is not available. Even their Chinese forum is useless. Their dev team is trash.
batuken said:
I'm sorry mate but unfortunately, there's no official ROM available to flash via EDL mode. Even fastboot ROM is not available. Even their Chinese forum is useless. Their dev team is trash.
Click to expand...
Click to collapse
opps,
So can we make our own flashable rom from backup. i have twrp backup all partitions, I dont know how to Make loader file , if u can i have working phone in hand,
I can do Jtag opration too , but there is no pinout also , must need to open Emmc and then get isp pinout itself, it's long process and hard to disassemble device is will. :|
If you have Pro Tools,like miracle, umt , ufi you take a full firmware backup of the other Black Shark 2 and flash it in your Black Shark 2, your problem will be fixed.
Hi everyone. Need some help.
How can i unbrick my ZenFone Max Pro M2 (ZB631KL)
Issues - after programm stuck, phone was restarted, and then - Black screen, zero reaction. No indication.
PC show's - qualcomm hs-usb qdloader 9008.
I tried QFIL with [firmware27]ZQL1820_Factory_201812071630_ChangeFlash.zip
But failed. Always one of two errors
1. sahara_rx_data:276:Unable to read packet header. Only read 0 bytes
2. Download Fail:FireHose Fail:FHLoader Fail: File dosn't exist.
What i can do without hardware flash ?
Thank for answers!
Closed. I done it. Phone is alive
How did u do that..can u pls tell me
antizack said:
Hi everyone. Need some help.
How can i unbrick my ZenFone Max Pro M2 (ZB631KL)
Issues - after programm stuck, phone was restarted, and then - Black screen, zero reaction. No indication.
PC show's - qualcomm hs-usb qdloader 9008.
I tried QFIL with [firmware27]ZQL1820_Factory_201812071630_ChangeFlash.zip
But failed. Always one of two errors
1. sahara_rx_data:276:Unable to read packet header. Only read 0 bytes
2. Download Fail:FireHose Fail:FHLoader Fail: File dosn't exist.
What i can do without hardware flash ?
Thank for answers!
Click to expand...
Click to collapse
Pls share your knowledge to us master :[
1. Use QPST. QFIL without QPST will not work. U'll get error (File not found or file not exist)
2. Use QPST v 2.7.495
With 2.7.496 i was getting error - 0 bytes readed
3. Important. Use windows 7. I don't know why - a wasn't able to flash on win 10 with USB 2.0 port or usb-hub.
I currently have Win 8.1, I think I'll try with that, if it doesn't work, I can always make a new partition and install win 7 there. Anyway I have never heard of QPST and QFIL, so I'll do some researches on that.
Thank you for your time, we really appreciate. I'll let you know if I manage to unbrick my device.
Be careful. When u'll flash, don't forget to check couple times all settings in QFIL.
I'm talking about xml files.
antizack said:
Be careful. When u'll flash, don't forget to check couple times all settings in QFIL.
I'm talking about xml files.
Click to expand...
Click to collapse
I don't understand where I have to get the files I need. I saw I need the firmware, I guess, but I don't understand what's up with the XML file. Where did you get them? Sorry if I'm disturbing you again.
NoobNotMaster69 said:
I don't understand where I have to get the files I need. I saw I need the firmware, I guess, but I don't understand what's up with the XML file. Where did you get them? Sorry if I'm disturbing you again.
Click to expand...
Click to collapse
Hello colleague, I also have the same problem, I tried some programs, but they didn't work, but I still haven't tried this QPST_2.7.495, but I need the flash, because I deleted the ones I had here. if you found it, give me the link.