Database Users

Redmi pro rom problem

Hi everyone!
I have bougth a Redmi Pro on Gearbest and it came with Chinese/English Version of MIUI.
After a week of usage, i turned off my xiaomi and when i turned back on, it stucked on a Mi logo. Far as i discovered searching on web, it was a bug that other peopel have reported too.
I took a opportunity of having this bug to fix, to put other rom on the phone. A rom with Portuguese language witch is my mother lang.
I tried to put the new rom via "SP Flash took" with the fastboot mod but without success.
I requested the unlocking on Xiaomi Unlocking site and when they repplyed and i connected the xiaomi to the computer, the program (XiaomiMiFlash) gave me an error message telling ""Couldn´t verify device. Current account is diferent from the account info in the device"
No i can´t do nothing with the phone.
Can you guys have some idea how can i solve this?
Thank you all!

There is a good chance that the phone is already unlocked.
What was the problem with fastboot? Maybe drivers issue?
Have you tried flashing TWRP? If it takes then the phone is unlocked and you can proceed with flashing the xiaomi.eu or globerom.

kremmit said:
There is a good chance that the phone is already unlocked.
What was the problem with fastboot? Maybe drivers issue?
Have you tried flashing TWRP? If it takes then the phone is unlocked and you can proceed with flashing the xiaomi.eu or globerom.
Click to expand...
Click to collapse
Tks 4 the support!
About the Fastboot i putted the phone on fastboot mode and i disabled the Driver Signature Enforcement on Windows. I connected the phone to the computer and started to run the SP Flash Tool. After the process was completed it wont gave me any result because the phone still stucked on Mi logo..
I did'n tried the TWRP because in every tutorial tells me that i need to go to the Developer Mode and activate the USB debugging i can not access to that because the phone don't give me more than the Mi logo.

hmm the fastboot method should have worked. Have you tried it on another computer, maybe 32bit windows?
When finished flashing with miflash in fastboot did it say it was ok at the end or did it give you an error? Als tried to reboot a few times after flashing without usb cable in the phone?

kremmit said:
hmm the fastboot method should have worked. Have you tried it on another computer, maybe 32bit windows?
When finished flashing with miflash in fastboot did it say it was ok at the end or did it give you an error? Als tried to reboot a few times after flashing without usb cable in the phone?
Click to expand...
Click to collapse
Im losing my mind!
I tried again in my father's desktop wich have a 64bit windows 7 (I havent a 32 bit at home. I will try to get one borrowed)
I tried with the SP Flash Tool following a guide from "xiaomitips" and, in this computer, the program dornt even recognize my phone. I push the Download button but that give me no signal.
Is there any other way to do this? Other ways to put the rom in the phone? (Sorry the noob language)

franciscobcl said:
Im losing my mind!
I tried again in my father's desktop wich have a 64bit windows 7 (I havent a 32 bit at home. I will try to get one borrowed)
I tried with the SP Flash Tool following a guide from "xiaomitips" and, in this computer, the program dornt even recognize my phone. I push the Download button but that give me no signal.
Is there any other way to do this? Other ways to put the rom in the phone? (Sorry the noob language)
Click to expand...
Click to collapse
I'm out of ideas at this point.
I had some trouble with fastboot that my phone did restart when in fastboot mode.
Then i had to change the order of plugging in the cable and starting the program but after that all worked.
No idea what next ...

I had this issue with a Redmi 3. I can't remember the exact solution but I believe you have to have the developer ROM installed in order to unlock the bootloader. Maybe if you search for an anterior model such as the Redmi 3 you will find more information on how to load your ROM. I'm sure that it's the same method for most Xiaomi phones. Good luck!

I heard about do a Hard Reset but i dont know how to do that because i cant access to the OS of the xiaomi.
Is there a way to do a hard reset with the xiaomi stucked on Mi logo?
Tks!
Happy 2017 for all!

I tried to put my phone one Recovery Mode but it is blocked. Its like the phone on this video:
https://www.youtube.com/watch?v=tTzdQpex7BQ
How can i unlock this?

I never could get into the xiaomi recovery either but i managed to flash twrp through fastboot though.

franciscobcl said:
Tks 4 the support!
About the Fastboot i putted the phone on fastboot mode and i disabled the Driver Signature Enforcement on Windows. I connected the phone to the computer and started to run the SP Flash Tool. After the process was completed it wont gave me any result because the phone still stucked on Mi logo..
I did'n tried the TWRP because in every tutorial tells me that i need to go to the Developer Mode and activate the USB debugging i can not access to that because the phone don't give me more than the Mi logo.
Click to expand...
Click to collapse
Hi
Does your problem with sp flashtools and flashing the ROM be solved ?
Sent from my Redmi Pro

I had this problem, but I'd installed TWRP already. But you shouldn't need USB Debugging on to flash TWRP. If you manage to flash TWRP, flash a new ROM (I recommend xiaomi.eu (I think they have Portuguese)) and wipe the Dalvik cache, /cache, and /data (you probably won't have to wipe /data/media).

Miui themes
Sorry will start new item

Have you tried a different cable, that is why mine wasn't recognized at first.

I'm having the same problem here. The phone rebooted itself when I changed the locale, and hung at the Mi logo. I already had TWRP flashed. I also took the opportunity to install a new ROM; the Global Dev ROM. It installed with no errors and I wiped the Dalvik, cache, etc. Still hangs at the Mi logo, but this time without the little loading dots at the bottom. Any suggestions?
Update: I can bring it back to the original state with the loading dots and "powered by Android" at the bottom with a backup I took before flashing the new rom, but still no progress.

I managed to restore my phone using the video:
Flash Xiaomi Redmi Pro Using SP Flash Tool [Locked Bootloader]
I can't post links since I don't have enough posts here yet, but search for it on Youtube.
Update: It seems like the unlocking permissions on my account have been retroactively rejected, I wonder if that has something to do with it. I also can't seem to find the Global ROM for the Redmi Pro anymore, just the China one. Does anyone have a link for the official Global ROM on the Xiaomi site?
Update 2: Suddenly I have unlock permission again, without reapplying, so that's cool. I installed the Eu HMPro ROM, everything's working well so far.

Phosphenes said:
I managed to restore my phone using the video:
Flash Xiaomi Redmi Pro Using SP Flash Tool [Locked Bootloader]
I can't post links since I don't have enough posts here yet, but search for it on Youtube.
Update: It seems like the unlocking permissions on my account have been retroactively rejected, I wonder if that has something to do with it. I also can't seem to find the Global ROM for the Redmi Pro anymore, just the China one. Does anyone have a link for the official Global ROM on the Xiaomi site?
Update 2: Suddenly I have unlock permission again, without reapplying, so that's cool. I installed the Eu HMPro ROM, everything's working well so far.
Click to expand...
Click to collapse
What I did bro ?
I still have the same problem?

franciscobcl said:
Hi everyone!
I have bougth a Redmi Pro on Gearbest and it came with Chinese/English Version of MIUI.
After a week of usage, i turned off my xiaomi and when i turned back on, it stucked on a Mi logo. Far as i discovered searching on web, it was a bug that other peopel have reported too.
I took a opportunity of having this bug to fix, to put other rom on the phone. A rom with Portuguese language witch is my mother lang.
I tried to put the new rom via "SP Flash took" with the fastboot mod but without success.
I requested the unlocking on Xiaomi Unlocking site and when they repplyed and i connected the xiaomi to the computer, the program (XiaomiMiFlash) gave me an error message telling ""Couldn´t verify device. Current account is diferent from the account info in the device"
No i can´t do nothing with the phone.
Can you guys have some idea how can i solve this?
Thank you all!
Click to expand...
Click to collapse
You could try dowloading the official rom and then download the CHINESE version of mipc suite then enter fastboot and connect the phone
Normally the chinese mi pcsuite automaticly detects the phone is in fastboot mode, you could use google translate to translate it all just choose redmi pro on model selector (the top selection bar)the text there is untranslateable just choose the one that says pro
And then under it chose the one that translate to chinese
After That there's two tick box under it, choose the ROM you downloaded
After that chose the one that translate to install brush package, if it doesn't work choose the download brush package next to it
Thus method worked for me when my phone bricked hope it helps you

MI A1 Bricked HARD!!!-AlekDev

Hi Guys my MI A1 was bricked i just use the test point to fix and my pc recognized as Qualcomm 9008 so flashed latest 8.0 everything worked but wifi and bt was broken so i decided again to put in EDL and flash it with same firmware after that MI flash shows success but device doesn't turn it jsut keep blinking led and goes to EDL everytime i connect to PC...tried with Nougat and Oreo firmwares same...i checked logs and saysthat device is successfully flashed and rebooted...but nothing just black screen and blinking led..Can anyone Help me?I can't send to Service because i will need to wait 1 month also i opened the back cover so i lost the warranty.....:crying::crying:

Hi,
did you try to flash with qfil or only mi flash ?
I'm not sure but may you ask Cosmic Dan he was planing to do an unbrick guide and he mentioned files which you can use with qfil to unbrick your device. I don't know how far he is with it.
But if you did manage to unbrick so far and only BT and WiFi is your issue aren't there several fix guides for the persist partition ?
For my personal experience after I had to unbrick my old n6p I had the same issue after flashing. Phone stays black and led just blinking. Try to long pressing power, or other button combinations while plugg and unplugging USB to pc and I mean really long pressing the buttons. It sounds a bit weired but my n6p came back and booted as usual.
I'm sry, but I can't tell you the right combination because I tried so much that time, because it was my only phone.
Good luck !

Bro if You Have A Backup Of Your phone Then flash It.
Sent from my [device_name] using XDA-Developers Legacy app

Qfil doesn't work because we have A/B Partition Layout....i have backup of my partitions that's not issue....

How much battery had you left at flashing ? May its just drained and not able to boot. Sometimes it's the stupid and simple things. If you have partition backups you should be able to fix your WiFi and BT.

coremania said:
How much battery had you left at flashing ? May its just drained and not able to boot. Sometimes it's the stupid and simple things. If you have partition backups you should be able to fix your WiFi and BT.
Click to expand...
Click to collapse
70%

Alek Dev said:
Hi Guys i ws experimenting something with my device so i bricked fully i just use the test point to fix and my pc recognized as Qualcomm 9008 so flashed latest 8.0 everything worked but wifi and bt was broken so i decided again to put in EDL and flash it with same firmware after that MI flash shows success but device doesn't turn it jsut keep blinking led and goes to EDL everytime i connect to PC...tried with Nougat and Oreo firmwares same...i checked logs and saysthat device is successfully flashed and rebooted...but nothing just black screen and blinking led..Can anyone Help me?I can't send to Service because i will need to wait 1 month also i opened the back cover so i lost the warranty.....:crying::crying:
Click to expand...
Click to collapse
You can get it back. You have lost the Wifi and Bluetooth (Mac Address files). You can boot your phone if it is in edl mode. Just press the Power Button for more than 30-40 seconds. Your phone will boot. If possible, try to stick the back cover and show it to service center. They will change your phone's motherboard! They don't know about edl and everything! They only change internal parts! :good:

birarvindersingh said:
You can get it back. You have lost the Wifi and Bluetooth (Mac Address files). You can boot your phone if it is in edl mode. Just press the Power Button for more than 30-40 seconds. Your phone will boot. If possible, try to stick the back cover and show it to service center. They will change your phone's motherboard! They don't know about edl and everything! They only change internal parts! :good:
Click to expand...
Click to collapse
Yes Go service centre When Your phone in warrenty.
Sent from my [device_name] using XDA-Developers Legacy app

Try updating your drivers. Happened to me once, MiFlash didn't detect it, but driver MANUAL update helped.

If u r using Mac Then Try in windows with Fastboot Rom.

Phone sent to Service Center....hopefully they will repair with my warranty,So No releases/No Builds around 1 month

After lot of waiting (FROM 23 MAY) this is what i got from my service center
" AFTER SERVICE REVIEWS AND SOFTWARE INSTALATION DEVICE REMAINS WITH A LOADING / DAMAGED MEMORY CHIP"
"The phone is stuck in EDL Mode due to improper use and serious damage from all sides. The same after a service overview and software installation could not be turned on or raised (shows no signs). The service order states that if you want to service, you will be offered an offer to change the motherboard. Greeting"
After that they tell me this"
"Otherwise, changing the motherboard with a working hand would be around 182 USD. Greeting"
i don't have that money it's too much expensive for me so i'm without any phone....

Alek Dev said:
Qfil doesn't work because we have A/B Partition Layout....i have backup of my partitions that's not issue....
Click to expand...
Click to collapse
I restored my Mi A1 at least 3 times with QFIL, not a problem.

meltbanana said:
I restored my Mi A1 at least 3 times with QFIL, not a problem.
Click to expand...
Click to collapse
What version of QFIL? What OS did you have? what firmware did you use? or you have made backup with qfil then restore it? if you have that will be good to send me at least i can try it ....i ussually get this error dmssfail with QFIL.....ty

Alek Dev said:
What version of QFIL? What OS did you have? what firmware did you use? or you have made backup with qfil then restore it? if you have that will be good to send me at least i can try it ....i ussually get this error dmssfail with QFIL.....ty
Click to expand...
Click to collapse
Windows 10 Pro, QFIL latest (2.7 or so), I used the latest stock ROM (tissot_images_V9.5.11.0.ODHMIFA_8.0) provided by Xiaomi.
I can only recommend to extract a ROM to a path close to your volume root, for example D:\Temp\tissot_images_V9.5.11.0.ODHMIFA_8.0.
By using deeper paths you'll probably get errors. Flat build. :good:

meltbanana said:
Windows 10 Pro, QFIL latest (2.7 or so), I used the latest stock ROM (tissot_images_V9.5.11.0.ODHMIFA_8.0) provided by Xiaomi.
I can only recommend to extract a ROM to a path close to your volume root, for example D:\Temp\tissot_images_V9.5.11.0.ODHMIFA_8.0.
By using deeper paths you'll probably get errors. Flat build. :good:
Click to expand...
Click to collapse
Thanks when i get the phone back from my carrier i will try it and post here

@meltbanana What Drivers did you use? some link?

Alek Dev said:
@meltbanana What Drivers did you use? some link?
Click to expand...
Click to collapse
I used the drivers provided by QFIL. Btw. flashing a flat build by QFIL recreates the partition layout, it really doesn't care about two system partitions.
Flashed EDL mode when I went back from treblizing earlier without going back to stock partition layout in first place.
Qualcomm Flash Image Loader handled it flawlessly to restore the standard gpt provided by rawprogram0.xml .

meltbanana said:
I used the drivers provided by QFIL. Btw. flashing a flat build by QFIL recreates the partition layout, it really doesn't care about two system partitions.
Flashed EDL mode when I went back from treblizing earlier without going back to stock partition layout in first place.
Qualcomm Flash Image Loader handled it flawlessly to restore the standard gpt provided by rawprogram0.xml .
Click to expand...
Click to collapse
So it restores the partition layout right? Also can you provide me link of QFIL?

Alek Dev said:
So it restores the partition layout right? Also can you provide me link of QFIL?
Click to expand...
Click to collapse
true, it restores the default partition layout, please pick one, that's what I used: https://duckduckgo.com/?q=QPST_2.7.438.3&atb=v89-4_g&ia=web
and here's the ROM link provided by Xiaomi: http://bigota.d.miui.com/V9.5.11.0....0.ODHMIFA_20180504.0000.00_8.0_1a04581058.tgz

Need some help interesting problem

Phone won't turn on
Bootloder mode is running
Fastboot mode rom loading
After rebooting, the leeco is waiting for 15s on the boot screen, and then the black screen and the notification light turn blue.
The same applies in EDL mode
Loading recovery with Fastboot
blackboard and blue notification light are on again
(sorry for my bad english)
(computer phone with black screen and blue led light
qualcomm hs-usb diagnostics 900e)

ceylin45 said:
Phone won't turn on
Bootloder mode is running
Fastboot mode rom loading
After rebooting, the leeco is waiting for 15s on the boot screen, and then the black screen and the notification light turn blue.
The same applies in EDL mode
Loading recovery with Fastboot
blackboard and blue notification light are on again
(sorry for my bad english)
(computer phone with black screen and blue led light
qualcomm hs-usb diagnostics 900e)
Click to expand...
Click to collapse
Try putting the phone into fastboot and use the All in One tool to check to see if the boot loader is still unlocked, sometimes you can flash something that will relock the bootloader and you will get the blue light, which can also mean that the battery is almost dead.
if you can unlock or it shows that it is unlocked, try flashing recovery with All In One tool. If successful Reboot to power off and fully charge phone then wipe and reinstall your rom etc.
Edit:
I just browsed your history, you flashed Jui and the recent Miui roms ( Pie) Anybody else reading stay away from those roms they are poorly made As is the JUI rom that @ceylin45 flashed.
I am pretty sure that the Jui rom or maybe even the Miui Rom uses the S1 bootloader, and that your issue is because you now have a locked S1 bootloader on your phone,
If I am remembering correctly, another XDA user had this exact issue. Caused by flashing a JUI rom.
If you can not unlock it or flash the correct EUI bootloader your only option will be using EUI for the S1, and unfortunately you will never be able to flash a custom rom again, you will be permanently stuck with EUI. This happened a few months ago to a user named Noel, he sold his phone as is.

Thank you very much for your interest.
do you know s1 eui connection i can use
Thank you...

ceylin45 said:
Thank you very much for your interest.
do you know s1 eui connection i can use
Thank you...
Click to expand...
Click to collapse
Unfortunately I don't have the guys details, (The guy who flashed the S1 version of EUI) He had the exact same issue that you are now having and he was able to get EUI working, that is what he told us.
I will look around and get back with you
Okay I am back
I found the conversation with that guy on Telegram, but I don't think he uses telegram anymore.You can go here and read his posts : https://t.me/leecolepro3roms/67347
He posted an image, of the files that he extracted from a S1 fastboot rom and pasted those into the leeco Qfil ( If I am remembering correctly. ) A few days later he told me that he got the phone working again by flashing RUI for the S1 which can be found on 4PDA here : http://4pda.ru/forum/index.php?showtopic=819125
Use Google translate and search this thread and you should find some discussions about using the S1 EUI to resolve your issue. Quite a few people apparently had that exact issue a couple of years ago. Again this is all from memory, and I didn't write anything in my notes because I don't have a coolpad. However, I am pretty sure that this will probably help you with at least getting EUI working.
Good luck.
@ceylin45
I updated what I wrote, so I am pinging you in case you didn't see it.

Thank you
I will search

Please help me... I have did very stupid thing with my xiaomi android TV mi box 3

I have put a software zip file on a memory stick and put it on the mi box USB port without flashing the correct suitable rom first, and since zi did that the android TV box is stuck on the splash screen with mi logo and is not starting as well I can't enter the recovery mode it is completely unresponsive.. Is there any way to get it back working?

Looks to me like your going to has the flash it with either a custom ROM or the factory. If the flash tool won't connect you'll have to unbrick it. You can find the proper pins on the NAND chip to jump at Freaktabs forums. Hope this helps.

It's time for repair in service, Mi3 box is very good choice for TV box

[SM-T585] Have I completely bricked my tablet? And is there something I can do about it?

So one day I wanted to install PostmarketOS and I managed to get the ZIP file to flash in TWRP, but it didn't work. Idiot me decided to extract the boot img and flash it onto the boot partition and now it's stuck on the boot logo "Samsung Galaxy Tab A6 blah blah...". I tried to get into recovery but to avail, even download mode too.
Well, with all that... Is it possible to somehow trigger an emergency download mode or since I took the back off the tablet, is there any pins that could short in order to reflash the EMMC? Here, I've attached some pics.
Let me know if all hope is lost and I have to get a new mobo. Thanks!

anon2003 said:
So one day I wanted to install PostmarketOS and I managed to get the ZIP file to flash in TWRP, but it didn't work. Idiot me decided to extract the boot img and flash it onto the boot partition and now it's stuck on the boot logo "Samsung Galaxy Tab A6 blah blah...". I tried to get into recovery but to avail, even download mode too.
Well, with all that... Is it possible to somehow trigger an emergency download mode or since I took the back off the tablet, is there any pins that could short in order to reflash the EMMC? Here, I've attached some pics.
Let me know if all hope is lost and I have to get a new mobo. Thanks!
Click to expand...
Click to collapse
You can refer to the video wherein the device is S20 FE but you will need to use EDL cable to get in the edl mode.

mvikrant97 said:
You can refer to the video wherein the device is S20 FE but you will need to use EDL cable to get in the edl mode.
Click to expand...
Click to collapse
Interesting, but my tablet's CPU is an Exynos 7870 Octa not a Qualcomm, not sure if it would work. Also, is it possible to make such EDL cable at home? Oh, and what about software, what do I need to use in order to reflash the stock ROM or at the very least bring back Download Mode? (I assume Odin wouldn't work?)

anon2003 said:
Interesting, but my tablet's CPU is an Exynos 7870 Octa not a Qualcomm, not sure if it would work. Also, is it possible to make such EDL cable at home? Oh, and what about software, what do I need to use in order to reflash the stock ROM or at the very least bring back Download Mode? (I assume Odin wouldn't work?)
Click to expand...
Click to collapse
[guide] repair hard bricked devices with deleted bootloader (sboot)
I'm writing this in android development section because this is only section for both models, i hope this is not a problem. Also i want to say thanks to sataccount from gsmhosting, he found working map at the end. This guide is for hard bricked...
forum.xda-developers.com