Hey...
This is my specs of my phone. (Nexus 4)
Model : mako
Rom : Purityrom
Kernal : Hellscore b46
and i just bought ADATA usb OTG flash drive (UD320) and doesn't work.
I have tried this on my friends XPERIA Z1 and i does work, also on the Galaxy S4.
What can i do?
yot2703 said:
Hey...
This is my specs of my phone. (Nexus 4)
Model : mako
Rom : Purityrom
Kernal : Hellscore b46
and i just bought ADATA usb OTG flash drive (UD320) and doesn't work.
I have tried this on my friends XPERIA Z1 and i does work, also on the Galaxy S4.
What can i do?
Click to expand...
Click to collapse
What are you using to power the OTG? The N4 doesn't supply power for OTG no matter the kernel... you need to supply external power to the OTG device, something like this Host OTG Cable with Power connector or it won't work.
Hello everyone,
Owning a Samsung Galaxy Grand Prime SM-G530FZ with android Version 5.0.2 , I wonder if it is possible to activate the OTG function (connect a USB interface to play a key) on this unit. Several technicians have told me that no, but one of them told me that this function is supported by its Galaxy Grand Prime and actually, he connected my OTG cable on his machine and could read the data on my USB key). He recommended me to reset my device.
My question is the following
Are there any Galaxy Grand Prime users who have successfully implemented OTG function on their Galaxy Grand Prime, and how they did it.
thank you for your reply
Best regards
Guepard66
galaxy grand prime not have otg support bro :/ sorry for the bad notice
---------- Post added at 02:24 AM ---------- Previous post was at 02:24 AM ----------
and we never support in the future
I have a g531h and it supports OTG, I just bought the adapter and all works fine, I guess it depends on which specific model you have, I'm sure all of the 531's have it also
Hey buddy I have SM-G530H and i tried to get OTG Support for few days and nothing helped me i think you should upgrade to SM-G530H
but i think developers should develope kerenl for otg because i think its kerenl probleme
SM-G530H is an older model than the SM-G531H.
The SM-G530 does not have the required hardware to support OTG.
It is not a software problem or a kernel issue, it just won't work.
u0aol said:
I have a g531h and it supports OTG, I just bought the adapter and all works fine, I guess it depends on which specific model you have, I'm sure all of the 531's have it also
Click to expand...
Click to collapse
usure?? g531h support otg??
You can try to compile your own kernel and enable the modules for the OTG Support.
Nayeem Hossain said:
usure?? g531h support otg??
Click to expand...
Click to collapse
100% positive, I bought an OTG adapter kit for about 8 dollars and use it to plug in my USB drives when I need to access files on them
I have the SM-G531H running latest firmware but it worked out of the box before any updating too
USB OTG Support on Grand Prime SM-G531F and SM G-531H
Well it works...
Nayeem Hossain said:
usure?? g531h support otg??
Click to expand...
Click to collapse
Try cm 14.1.... It supports in SM-530H..... IT IS JUST kernal PROBLEM .... Please develop a kernel for it....
Hit thanks if I am correct.....
Yes you Can
YES YOU CAN USE TH otg FUNCTION IN GALAXY GRAND PRIME BUT FOR THAT YOU HAVE TO INSTALL A CUSTOM ROM 6.0.1 THAt is listed in the development section. OTG function work properly in that but i also want you to know that in that rom battery consumption is high or fast . also after that i have problem with my camera . it says camera failed after 2 or 3 days which i m trying to figure out.
manij490 said:
YES YOU CAN USE TH otg FUNCTION IN GALAXY GRAND PRIME BUT FOR THAT YOU HAVE TO INSTALL A CUSTOM ROM 6.0.1 THAt is listed in the development section. OTG function work properly in that but i also want you to know that in that rom battery consumption is high or fast . also after that i have problem with my camera . it says camera failed after 2 or 3 days which i m trying to figure out.
Click to expand...
Click to collapse
I have otg in smg531f model
Owen007 said:
I have otg in smg531f model
Click to expand...
Click to collapse
i was talking about smg530h bro.
Can I convert my sm-g531f from lte to volte and also Wil it support otg? ??
Does SM-G530P support OTG?
Guys we know that OTG doesn't support in a6000/plus..but we can see otgusb folder inside the stock ROM..(anyone noticed)it is a good sign for us i think...that our device support OTG...but I don't know how to activate OTG...so anyone doing research for OTG to our beloved device..check the image there is a otgusb folder...
Jay Han said:
Guys we know that OTG doesn't support in a6000/plus..but we can see otgusb folder inside the stock ROM..but I don't know how to activate OTG...so anyone doing research for OTG to our beloved device..check the image there is a otgusb folder...
Click to expand...
Click to collapse
Well there was a kernel **Baba Baltkari** with alleged OTG feature, but the developer left the project due to some conflicts. The developer himself has added a screenshot here. But, nobody else confirmed it. Its maybe due to the reason that others don't have the USB OTG-Y cable, which provides external power source. Well, I too never checked due to the same fact. BTW, having OTG support would be great. Its the only limitation in a6000.
I have a vivax fly 2 and my phone doesn't support otg. It has otg API but I think problem is with otg kernel module. I need otg because I want to connect usb camera. I would appreciate any help. Thanks in advance
Can you make usb otg work on p8 lite original room? it would be great feature for me to use my Fiio q1 dac on my phone,,some guys say usb otg work perfecly on twrp but it doesnt work on room itself,,
Croaid said:
Can you make usb otg work on p8 lite original room?,,i finaly got it working on twrp and it would be great feature for me tu use my Fiio q1 dac on my phone,,some guys say usb otg work perfecly on twrp but it doesnt work on room itself,,
Click to expand...
Click to collapse
Did you get OTG working on TWRP ? which Andriod Version and TWRP version do you have .
If possible share the links .
Actually we are trying to get OTG working but cant get succeed and also can you share some screen shots?
If you have rooted your device and have some experience on editing build prop then following the guide from https://forum.xda-developers.com/android/general/how-to-enable-otg-multi-window-eye-t3594001 and check whether you got any success
PS: Don't copy paste type them manually.
Works on Android 6?
Croaid said:
Can you make usb otg work on p8 lite original room?,,i finaly got it working on twrp and it would be great feature for me tu use my Fiio q1 dac on my phone,,some guys say usb otg work perfecly on twrp but it doesnt work on room itself,,
Click to expand...
Click to collapse
Your phone is P8 lite?