No 3g or 2g after *#*#4636#*#* Radio Band selected - OnePlus 2 Q&A, Help & Troubleshooting

Hi guys...
Could really use some help here...
I was facing some issues with my 4g network... So I went to the *#*#4636#*#* menu and turned off radio etc...
I usually did this when my 4g network would give me problems.
However last time I had some time in my hand and decided to see what other options are there. SO I went to the Radio Band option and I don't remember what I chose but ever since then my phone can detect only 4g on either sim. No 3g no 2g.
I went to the radio band menu again and have tried selecting all options but nothing seems to work... I get USA band and then BAND MODE 31,32, 33 all the way up to 42...
Please help me...

I am new to posting in the forum. So I can't figure out how to attach images.

[email protected] said:
Hi guys...
Could really use some help here...
I was facing some issues with my 4g network... So I went to the *#*#4636#*#* menu and turned off radio etc...
I usually did this when my 4g network would give me problems.
However last time I had some time in my hand and decided to see what other options are there. SO I went to the Radio Band option and I don't remember what I chose but ever since then my phone can detect only 4g on either sim. No 3g no 2g.
I went to the radio band menu again and have tried selecting all options but nothing seems to work... I get USA band and then BAND MODE 31,32, 33 all the way up to 42...
Please help me...
Click to expand...
Click to collapse
i had this problem i was also playing with the radio bands in the service menu follow these steps and surely you will get 2g coverage.
1. make sim 1 and as primary and then open service menu by *#*#4636#*#*.
and then select radio bands from top right corner and select radio band 42
2. now switch the sim cards in the sim slot and repeat the whole process from step 1 surely you will signals on both sim.

[email protected] said:
Hi guys...
Could really use some help here...
I was facing some issues with my 4g network... So I went to the *#*#4636#*#* menu and turned off radio etc...
I usually did this when my 4g network would give me problems.
However last time I had some time in my hand and decided to see what other options are there. SO I went to the Radio Band option and I don't remember what I chose but ever since then my phone can detect only 4g on either sim. No 3g no 2g.
I went to the radio band menu again and have tried selecting all options but nothing seems to work... I get USA band and then BAND MODE 31,32, 33 all the way up to 42...
Please help me...
Click to expand...
Click to collapse
just do factory reset and flash full oxygen rom and setings will reset

SOLVED!!!!
abukwr92 said:
i had this problem i was also playing with the radio bands in the service menu follow these steps and surely you will get 2g coverage.
1. make sim 1 and as primary and then open service menu by *#*#4636#*#*.
and then select radio bands from top right corner and select radio band 42
2. now switch the sim cards in the sim slot and repeat the whole process from step 1 surely you will signals on both sim.
Click to expand...
Click to collapse
You sir are a genius... May you live long and prosper...

Something related
Ok.... now I have network on both sims, 4g as well as 3g and 2g... however now my data connection only works on SIM2... when i use the same SIM on SIM1, theres just an exclamation mark beside LTE (or H or E) and no internet... But when i use SIM slot 2 with the same SIM, voila !!! I have data...
Whats the issue...

I went from oxygenOS to cm13 and I having issues after couple mins I fall back HSPA+

Related

1700 and 2100 wcdma on N7100 intational

So I was playing around with my unlocked note nd I found a selection of bands nd I can select them but not sure yet if it does unable 1700 nd 2100 bands to work on wind mobile or tmobile any ideas ive the pictures
What code did you enter to find those options?
Note 1 had the same menu options.
It doesn't mean anything without actual support in the phone.
I assume, like the Note 1, if you turn those on your phone is going to reject your sim card.
- Frank
Hi just peeked into this and was able to select 1700 band, go to comi bands and select 1700 wcdma and any other missing band and it will be selected. If it makes any difference i dont know since im in a good refarm area for tmobile.
ronj1986 said:
What code did you enter to find those options?
Click to expand...
Click to collapse
*#197328640# nd Debug screen band selection youll find everything
ChodTheWacko said:
Note 1 had the same menu options.
It doesn't mean anything without actual support in the phone.
I assume, like the Note 1, if you turn those on your phone is going to reject your sim card.
- Frank
Click to expand...
Click to collapse
I guess you right I used to own a note 1 but never tried it only if one can try nd see what happens because my sim is not getting rejected but I dont have a wind or tmobile to test with
5800xm_user said:
Hi just peeked into this and was able to select 1700 band, go to comi bands and select 1700 wcdma and any other missing band and it will be selected. If it makes any difference i dont know since im in a good refarm area for tmobile.
Click to expand...
Click to collapse
By the sound of it our hardware just don't have the bands but yet we can select them kinda strange but if you could try using tmobile sim let use know what happens
I was able to do this also, with the leaked XXDLJ2 FW (4.1.2) - I tried with earlier FW before and couldn';t get into the menu - could be total noob error though...
Remove SIM card first.
Then power up Phone, dial #*197328640*
Select: DEBUG/PHONE CONTROL/NETWORK CONTROL/SELECT WCDMA BANDS
from there, it seems you can select ALL, or add the bands you want. (I'm on TMO USA so I selected 1700/1900/2100)
Now, what I don't know is...once you re-insert the SIM ( and you have to power cycle to do that) does the TMO SIM override the changes I just made? I have very weak 4G near my house so I cannot check if 4G is working or not.
CORRECTION: Forget what I said about removing SIM card !!! I was able to access the menu with the SIM inserted, and it looks like my settings are holding ( there's an asterisk next to the WCDMA bands I chose). This is promising!
I did this on a stock rom and after rebooting settings stay the same. Cant tell if itll make any difference since im at work and dont get good coverage. Will report as soon as i can and im on tmobile california
Sadly, it appears that any other setting than Automatic will disable WCDMA altogether - I sat in my car for 20 minutes right under a cell tower tryin to make it work, but was stuck on Edge...as soon as I selected AUTO, my phone jumped to H+ ...and it was on the 1900 Band since the 1700 band is automatically unchecked when switching to Auto. Oh well...gotta wait for the damn TMo refarm then.
The TMUS reframe is killin' me. Neither my house or work are in a reframed area. However, there are several points on my commute that are reframed, and I did have a chance to eat dinner in one. Holy moly is HSPA+ fast! EDGE is virtually useless with these devices.
McNoob said:
Sadly, it appears that any other setting than Automatic will disable WCDMA altogether - I sat in my car for 20 minutes right under a cell tower tryin to make it work, but was stuck on Edge...as soon as I selected AUTO, my phone jumped to H+ ...and it was on the 1900 Band since the 1700 band is automatically unchecked when switching to Auto. Oh well...gotta wait for the damn TMo refarm then.
Click to expand...
Click to collapse
you can select mulit bands that way you dont have to use auto as it does turn em off ,i used the last selection it lets you select what you want
Sorry to check in late but with these changes I notice that my signal sticks to 2g and barely wants to switch to H or H+. Maybe when Im off work Im gonna try to select all wcdma band and switch to wcdma only in network mode. when selecting network mode i notice it changes all the settings in the service menu.
leeroy1034 said:
you can select mulit bands that way you dont have to use auto as it does turn em off ,i used the last selection it lets you select what you want
Click to expand...
Click to collapse
that's what I've been doing - COMBI BANDS, and add GSM 850/900/1800/1900 and WCDMA 1700/1900/2100.
But it didn't work for me, phone remains stuck on EDGE -
I dont think this does much only put me in Edge mode or no data at all. Its weird that theres an option for it. So ya no luck here...

[Q] Nexus 4 Radio - No 3G/HSPA Signal

I've not had a 3G/HSPA signal on my N4 for a while now. Trouble is I don't know exactly when it happened as I'm generally on either WiFi at home or at work, where I know I can only get Edge.
I've tried the usual check the APN, *#*#4636#*#* and nothing's jumping out at me (if I tell it to use WCDMA only I get no signal at all).
I'm wondering if it was the 4.2.2 udpate and wonder if I've got the wrong radio - so the question is does anyone know what radio I should have on my N4? I'm in the UK on Vodafone, but I got the phone from the Play Store.
I've tried searching but the N4 seems to have had so many signal issues it's difficult to sift out the relevant stuff
I'm not rooted but I'm happy to do it if needed. Already tried a factory reset so nothing to lose!
Cheers,
Dave
have you tried a different sim card? thete isnt a specific radio per region, so thats not a problem.
simms22 said:
have you tried a different sim card? thete isnt a specific radio per region, so thats not a problem.
Click to expand...
Click to collapse
Yeah, sorry, forgot to say. I tried the wife's SIM (different operator) and same issue, only got a 2G signal.
I was thinking it might have been an issue when they updated it to remove the LTE "feature"
Even i have the same problem . I am from India and also have tried a couple of sim card . Im not able to get 3g signal at all . Anyone pls help....
i have the same issue solved whit RMA my first nexus 4 was defective, my new nexus 4 changed in warranty now works well
3G/HSPA networks
participles ipntsly
I started having the same issue today in Atlanta. Had another T-Mobile HSPA phone sitting next to mine with 4 bars while I was on Edge. My N4 is < 1 week old and seemed to be OK but now I can't get it on anything other than Edge.
I've checked my APN settings, reset the radio, turned data on/off and reset the phone with no luck.
Any advice?
Update: Just got mine working, here is what I did.
Wasted 20 mins talking to Google and T-Mobile. (I don't recommend this step.)
Type in *#*#4636#*#*
Scroll down and change 'WCDMA Preferred' to 'WCDMA Only'. At this point my bars switched from Edge to HSPA.
Now, undo the change and put it back on WCDMA Preferred. Make sure it still has a 3G or an H next to your bars.
Exit and enjoy the fast phone.
gtgeek said:
Update: Just got mine working, here is what I did.
Wasted 20 mins talking to Google and T-Mobile. (I don't recommend this step.)
Type in *#*#4636#*#*
Scroll down and change 'WCDMA Preferred' to 'WCDMA Only'. At this point my bars switched from Edge to HSPA.
Now, undo the change and put it back on WCDMA Preferred. Make sure it still has a 3G or an H next to your bars.
Exit and enjoy the fast phone.
Click to expand...
Click to collapse
This worked for me.. thanks
I am having the exact same problem as Dave. My n4 has just stopped connecting to WCDMA (H).
I have tried re entering my APN's, Turning on/off mobile network, Airplane mode, rebooting and removing the SIM. From the test menu I have tried WCDMA only but I lose my signal completely and go to emergency calls only. If I use either GSM only or WCDMA preferred I can get a 2G connection but nothing more and when on WCDMA preferred it can lose connection completely as well.
I am also with Vodafone UK.
solution for this
Guys....even I had the same problem.....but was able to solve it.....
Go to settings >apps>all >Google framework services in this disable it and clear data and again enable it....
Enjoy 3g once again ....it worked for me
caka said:
Guys....even I had the same problem.....but was able to solve it.....
Go to settings >apps>all >Google framework services in this disable it and clear data and again enable it....
Enjoy 3g once again ....it worked for me
Click to expand...
Click to collapse
Thank you! A few seconds after doing this my N4 connected to 3G!
I have tried what solutions were posted here but everytime I switch from 2G to 3G in the menu I lose signal on my phone..
gtgeek said:
Update: Just got mine working, here is what I did.
Wasted 20 mins talking to Google and T-Mobile. (I don't recommend this step.)
Type in *#*#4636#*#*
Scroll down and change 'WCDMA Preferred' to 'WCDMA Only'. At this point my bars switched from Edge to HSPA.
Now, undo the change and put it back on WCDMA Preferred. Make sure it still has a 3G or an H next to your bars.
Exit and enjoy the fast phone.
Click to expand...
Click to collapse
I tried this as soon as I put WCDMA preferred I lose signal, I have tried doing this in several locations as I live in the country, tried at my school where my friends get H+ and I still lose connection. tried going back to stock still the same issue
Can someone fixed this problem? "WCDMA only" mode make my N4 lost signal.
Sent from my Nexus 4 using XDA Premium 4 mobile app
Getting bars on 'GSM only'
I have got the same issue on my Nexus 4, and I still don't understand how it happened in the first place. I updated a bunch of apps before going to bed and remember waking up to no signals on my phone.
Currently I only receive signal when I go *#*#4636#*#* and set it to 'GSM only'. Any other configuration (WCDMA preferred, WCDMA only, etc) results in loss of signal.
I have tried the following with no luck:
1) Restored Factory Settings
2) Installed an older version of android
3) Flashed multiple radios
4) Steps listed on this thread
Can anyone help me out with this?
Thanks

OnePlus Two - HSPA+ and 3G Data Connection Problem

Hi Everyone,
I'm usually just a reader on XDA, but I have found a problem that appears not to have been solved and wondered if anyone had any insight.
Problem Summary
When in an area (or network) with only HSPA and UMTS (strong HSPA/UMTS signal, but with no LTE or 2G available), the phone will drop from H+ to 3G erratically, always dropping the data connection. Traditional phone calls are not affected.
Detailed Description
I have a OnePlus Two and have 2 SIM cards. My first SIM Card is with Bell Canada (Virgin), and the second SIM Card is with WIND Mobile Canada.
Neither Bell nor WIND operate a 2G network, so the lowest the service can fall to is UMTS/3G.
Initially, I didn't notice the problem because Bell also operates an LTE network, and there is no problem with dropping the data connections when on LTE.
When I switched to the WIND SIM card (which only operates HSPA and UMTS), I noticed a problem where the phone would initially connect to H+, begin downloading whatever is needed (say, streaming music), but then part way through the download, the connection would switch to 3G, and the data would effectively stop. Within a minute, the service would jump back to H+ and download some more, but this cycle would continue (H+ --> 3G --> H+ --> 3G... ), with no way of knowing 1) how long the H+ connection would last before dropping to 3G (usually less than 30 seconds), and 2) after dropping to 3G, how long before going back to H+. This problem makes the phone almost useless when there is no LTE.
The most obvious troubleshooting I did was move to locations of better signal but I quickly ruled that out, as nothing seems to remove this problem. Other things I tried was to: move locations in the city, reboot phone, hard reset phone, flash most updated version of Oxygen, unlock bootloader, root, try the HSPA Keepalive app, swap SIM1 to SIM2, and many other things.
I originally thought this was a network issue, but I put this WIND SIM in another phone and there was no problem in any way that resembled this problem.
I also ruled out this being a network-specific problem, as I have taken a trip with the Bell SIM to an area where Bell does not have any LTE coverage (only HSPA and UMTS) and the same problem occurs on Bell as with the WIND SIM.
I have found people who had this problem on the OnePlus One tend to recommend using 2G to stabilize the connection, but this is not possible on Bell or WIND. That solution also would not provide adequate data speeds.
Remember this problem only affects data connectivity, as 3G traditional phone calls have no problems.
Question
Does anyone know if there is a way to adjust the conditions when the OnePlus Two will choose to switch from H+ to 3G?
Does anyone have any easier suggestions?
Thank you all in advance, because this rendering this phone almost useless when there is no LTE coverage.
I believe your problem is that phone it's dualsim standby, that means only one modem that alternates signal for both sims, I think normal would be alternating from faster network to slower network on sim without data.
Having to change to g3 between sims theres something stoped in the modem and data connection is also stopped.
You have no problem with voice calls because other sim is automatically turned off and unreachable.
There's nothing you can do if you're forced to only 3g on both sims
By 3g I mean 3g or h+ which to my knowledge are the same
Hope I was helpful and not wrong or more confusing
Sent from my ONE A2005 using Tapatalk
fburgos said:
I believe your problem is that phone it's dualsim standby, that means only one modem that alternates signal for both sims, I think normal would be alternating from faster network to slower network on sim without data.
Having to change to g3 between sims theres something stoped in the modem and data connection is also stopped.
You have no problem with voice calls because other sim is automatically turned off and unreachable.
There's nothing you can do if you're forced to only 3g on both sims
By 3g I mean 3g or h+ which to my knowledge are the same
Hope I was helpful and not wrong or more confusing
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
Thanks, I will try disabling the second SIM to see if there is a bug with the dual-sim...
What it currently does with the second SIM is it either shows "R" for roaming or just emergency only, but perhaps there is a software issue so I'll see if disabling the second SIM makes a difference.
biomedeng said:
Thanks, I will try disabling the second SIM to see if there is a bug with the dual-sim...
What it currently does with the second SIM is it either shows "R" for roaming or just emergency only, but perhaps there is a software issue so I'll see if disabling the second SIM makes a difference.
Click to expand...
Click to collapse
Though strange, this workaround fixes the issue. Thank you to fburgos for the suggestion!
So just in case anyone ever finds this issue creeps up on them, the solution is to DISABLE the SIM you are not using. It's not the most convenient workaround to swap SIMs, but the other SIM will be in Emergency Mode, so it really makes no functional difference.
On the technical side, it does appear that there is actually a bug in Android for a very uncommon network configuration. It will only appear in this exact configuration:
SIM1: Network has HSPA/3G only, no LTE or 2G to move to
SIM2: Network also only has HSPA/3G with no LTE or 2G
The non-data SIM does NOT connect to a roaming network (connects with "Emergency Only") - if it connects to a roaming 2G network, this problem does not happen.
The data SIM connects to HSPA/3G
Both SIMs are active
I'm not sure if this will happen anywhere else in the world other than having a WIND Mobile Canada SIM and Bell or TELUS Canada SIM
If anyone has insight on how to report this to Google, or someone else who can confirm my theory, that would be great!
Try this:
1. You need to make sure you have the correct LTE APN selected in mobile networks and LTE as preferred type.
2. Go to dialer and type in this: *#*#4636#*#*
3. Phone Information
4. Set Preferred Network Type to: LTE/GSM (PRL) - you an play with which one you wanna use but the one I said works for sure. on other roms I have" TD-SCDMA, GSM/WCDMA and LTE"
5. Now click TURN OFF RADIO and wait WAIT few secs. will that button turns to Turn Radio ON
6. Now TURN ON RADIO and wait
7. when u see the triangle for the signal is back, at least black , go down and lick SMSC REFRESH then UPDATE.
8. now just go back to APN settings and go into your LTE APN
9. Change Bearer to LTE
biomedeng said:
Hi Everyone,
I'm usually just a reader on XDA, but I have found a problem that appears not to have been solved and wondered if anyone had any insight.
Problem Summary
When in an area (or network) with only HSPA and UMTS (strong HSPA/UMTS signal, but with no LTE or 2G available), the phone will drop from H+ to 3G erratically, always dropping the data connection. Traditional phone calls are not affected.
Detailed Description
I have a OnePlus Two and have 2 SIM cards. My first SIM Card is with Bell Canada (Virgin), and the second SIM Card is with WIND Mobile Canada.
Neither Bell nor WIND operate a 2G network, so the lowest the service can fall to is UMTS/3G.
Initially, I didn't notice the problem because Bell also operates an LTE network, and there is no problem with dropping the data connections when on LTE.
When I switched to the WIND SIM card (which only operates HSPA and UMTS), I noticed a problem where the phone would initially connect to H+, begin downloading whatever is needed (say, streaming music), but then part way through the download, the connection would switch to 3G, and the data would effectively stop. Within a minute, the service would jump back to H+ and download some more, but this cycle would continue (H+ --> 3G --> H+ --> 3G... ), with no way of knowing 1) how long the H+ connection would last before dropping to 3G (usually less than 30 seconds), and 2) after dropping to 3G, how long before going back to H+. This problem makes the phone almost useless when there is no LTE.
The most obvious troubleshooting I did was move to locations of better signal but I quickly ruled that out, as nothing seems to remove this problem. Other things I tried was to: move locations in the city, reboot phone, hard reset phone, flash most updated version of Oxygen, unlock bootloader, root, try the HSPA Keepalive app, swap SIM1 to SIM2, and many other things.
I originally thought this was a network issue, but I put this WIND SIM in another phone and there was no problem in any way that resembled this problem.
I also ruled out this being a network-specific problem, as I have taken a trip with the Bell SIM to an area where Bell does not have any LTE coverage (only HSPA and UMTS) and the same problem occurs on Bell as with the WIND SIM.
I have found people who had this problem on the OnePlus One tend to recommend using 2G to stabilize the connection, but this is not possible on Bell or WIND. That solution also would not provide adequate data speeds.
Remember this problem only affects data connectivity, as 3G traditional phone calls have no problems.
Question
Does anyone know if there is a way to adjust the conditions when the OnePlus Two will choose to switch from H+ to 3G?
Does anyone have any easier suggestions?
Thank you all in advance, because this rendering this phone almost useless when there is no LTE coverage.
Click to expand...
Click to collapse
I have the same problem. Do you already have solved it?
I use only one SIM card so it is not a problem two cards.
really you do not have this problem? if no one knows the solution?
compared with my htc butterfly 2 and another low-end android, one plus 2 running latest Oxygen OS has serious connectivity issues. I compared the signals strength using same sim card in same location (including being connected to the same tower) and One Plus 2 keeps dropping the connection and has really poor signal strength. I have tried the *#*#4636#*#* and tried different network modes, but none of them are helping. Its a real disappointment that the basic feature of this phone is screwed up.
I have tried with CM13 as well. Any ideas if this is a modem version issue?
odeccacccp said:
Try this:
1. You need to make sure you have the correct LTE APN selected in mobile networks and LTE as preferred type.
2. Go to dialer and type in this: *#*#4636#*#*
3. Phone Information
4. Set Preferred Network Type to: LTE/GSM (PRL) - you an play with which one you wanna use but the one I said works for sure. on other roms I have" TD-SCDMA, GSM/WCDMA and LTE"
5. Now click TURN OFF RADIO and wait WAIT few secs. will that button turns to Turn Radio ON
6. Now TURN ON RADIO and wait
7. when u see the triangle for the signal is back, at least black , go down and lick SMSC REFRESH then UPDATE.
8. now just go back to APN settings and go into your LTE APN
9. Change Bearer to LTE
Click to expand...
Click to collapse
Did It.. But it seems like it didn't solve my problem..

Band Setup Problem South America (select band GSM and UMTS menu)

Good day
I am currently in Venezuela and I just received a Moto X pure literally just get it out of the box. When I plug the SIM on the device recognized it I could receive SMS and Calls but no data, no 3G no H+, no 4g. I double checked the APN and nothing. So I look some Info and found this app from the store called "Network" which i think its just a shortcut to the *#*#numbers#*#* anyway below there was an option "lte/gsm/cdma auto (prl)" i change this to other options to try to force LTE but nothing worked. So going desperated press the three dots menu on top and click "select radio band" and by mistake selected USA Band. Inmediatly lost signal and now the decvice doesnt recognize the sim card anymore. I tried to go back to this menu (select radio band) but the only options i see are "USA Band Cellular and PCS" none of this working for me. I ll really appreciate any help you could bring me cause i dont have a phone to replace this one. I also ask the moderator to move this post if this is not the right place for it, I ve been seaching for help but there is just too much information concerning radios, modem, and bands that i can really understand.
My carrier here is Digitel working with this bands
LTE 1800
3G 900
Hopefully you unlocked the bootloader and made a backup before messing with such things. If not, factory reset is probably your best bet.
thanks for the reply
I just did a factory reset and still the same... could flashing a stock rom help with this?
Likely reflashing the firmware will put it back to where you originally had it. If it asks you for a password for anything, it should be all 0's (00000).

Problem with 4G signal @ Dutch vodafone 800, 1800, 2600 MHz

Hello,
I have the following problem: I can't get a 4G signal with my provider.
Vodafone Netherlands uses 800, 1800, 2600 MHz for 4G connection.
I have bought my telephone at flosmall . com
It should work, or do I forget something?
Can somebody explain this?
I had the same.
I tried some 4g signals apps to check my connection. This one seemed to fix it: https://play.google.com/store/apps/details?id=com.mcstealthapps3.networksignalsearch
Let me know if it worked for you!
I have trieded with the app but nothing changed.
But still on 3G...
I need to ask this.
Is your SIM card even 4G capable? If its older than 3-4 years it might not be.
I don't know anything about vodafone, but try googling, for one of my providers I actually needed to activate 4G on their website after logging in to my account.
Also. Settings -> Dual SIM & mobile networks. Is network mode set to 4G priority and Celluar data to correct SIM card if you are using dual setup.
Yes the sim card is capable with 4G (was using it on Lumia 950XL).
Have contacted Vodafone about the problem.
But the will only support devices that Vodafone Netherlands will be sell.
Have tried to flash lineage rom, but nothing change about the signal.
(stock Rom was from groschopp)
I also have a Le Pro 3 (x720) on the same network in the Netherlands and I have no issues with 4g.
I am currently using the Grossoshop-Rom (Build-number WAXCNFN5902011181S).
You can download several signal apps in the play-store to see if Band 20 is available to you, this is the one used in my region for 4g Vodafone.
I assume you set the preferred network type to 4G?
It's working now
Have called Vodafone again for some extra information about the frequency band for 4G.
But nobody could help me, there was one person that say i can give you a other simcard type maybe it will help. (I say how will it help if 4G works on a other phone with the same sim card, but let's just test it)
Afterwards the call, visited the shop for a other sim card
Doing the sim in slot 1 nothing changed, same 3G signal.
Was thinking this the last try and do the sim card in slot 2 and after 10 minutes i have LTE signal.
Trying slot 1 again but only 3G. changed back to slot 2 and solved.
Have earlier check slot 2 with me "older" sim card and only 3G was showing up.
I have noticed stock ROMs have better signals than say CM
88Gamer88 said:
It's working now
Have called Vodafone again for some extra information about the frequency band for 4G.
But nobody could help me, there was one person that say i can give you a other simcard type maybe it will help. (I say how will it help if 4G works on a other phone with the same sim card, but let's just test it)
Afterwards the call, visited the shop for a other sim card
Doing the sim in slot 1 nothing changed, same 3G signal.
Was thinking this the last try and do the sim card in slot 2 and after 10 minutes i have LTE signal.
Trying slot 1 again but only 3G. changed back to slot 2 and solved.
Have earlier check slot 2 with me "older" sim card and only 3G was showing up.
Click to expand...
Click to collapse
Same think, only H+ with Dutch Vodafone, put my SIM in slot 2 (hot swap) and immediately it turned on 4G :good:
(stock ROM 23s)
i have same issue in spain with x720 on simyo: no work 4g, only h+
i put on sim2 and nothing change
flammjager said:
i have same issue in spain with x720 on simyo: no work 4g, only h+
i put on sim2 and nothing change
Click to expand...
Click to collapse
You need to enter the APN settings for your provider's data coverage in the Mobile data section of Settings.
sk8223 said:
You need to enter the APN settings for your provider's data coverage in the Mobile data section of Settings.
Click to expand...
Click to collapse
apn is on and correctly
flammjager said:
apn is on and correctly
Click to expand...
Click to collapse
Are you on a custom ROM? Maybe it did something to the modem. If so, you need to return to a stock ROM and try.
The phone has all the bands it needs to work on your carrier, and my carrier as well. My SIM already had the APN settings for my carrier on it, and I connected to LTE right away on my x722. I'm on a vendor ROM, which is pretty much just stock eUI. I can't fathom why it doesn't work for you if you're still on stock. Have you tried the SIM in other phones?
I also have this problem in Romania with my LeECO Le Pro3, but with Orange 800,1800 and 2600Mhz. The only solution for this problem was to manualy search and select the 4G operator network. Although in settings/network operator it was on 4G/3G/2G(Auto) by default, my phone was stuck in H+/H/3G until i manualy search and select 4G. If you are sure your SIM is 4G and you have the corect APN you can try this but you will have to search and select for several times manualy to work. I find this solution very uncomfortable because every time you restart your phone or put it in airplain mode, you will have to repeat manual searches and register in 4G.
my x720 doesn't have the correct bands active. i activated them with qpst but only actived and running in sim2 (sim 1 actived but no gain lte signal)
ah! i'm on 20s
88Gamer88 said:
Hello,
I have the following problem: I can't get a 4G signal with my provider.
Vodafone Netherlands uses 800, 1800, 2600 MHz for 4G connection.
I have bought my telephone at flosmall . com
It should work, or do I forget something?
Can somebody explain this?
Click to expand...
Click to collapse
Do you own the X722?
Hello, I have problem with 4G, with Android 8.1
When I back Android 8.1 I have 4G Signal.
---------- Post added at 09:09 PM ---------- Previous post was at 08:57 PM ----------
Hi, after I install All Android custom 8.1
I try install android 7.1 (AICP 12.1) I have LTE Signal
When I back Android 8.1 and select Only LTE, I don't have any signal (4g,3g etcc) I have chage to "Global" and I have H+ signal

Categories

Resources