Database Users

[Q][L5-E615] dual sim does not work properly

Hi,
My device is LG L5-E615 unlocked.
I've put 2 different operators sim cards into the device. The first slot sim is WCDMA and the second slot is normal GSM.
When I enable both slots, from time to time(like 10 minutes to 1 hour), the connection of the GSM sim card goes away and it says "No Service" and after a few minutes (2 or 3 minutes), the signal comes back. I'm not on the move and I have strong signal.
When I use 2 GSM sims, such problem does not happen. It only happens when one sim card is WCDMA and the other is GSM.
I've changed the slots (First WCDMA, Second GSM / First GSM, Second WCDMA), but it doesn't help.
Does anyone else have such problem? Any idea how can I track the issue and solve it?
Thanks

hamed1988 said:
Hi,
My device is LG L5-E615 unlocked.
I've put 2 different operators sim cards into the device. The first slot sim is WCDMA and the second slot is normal GSM.
When I enable both slots, from time to time(like 10 minutes to 1 hour), the connection of the GSM sim card goes away and it says "No Service" and after a few minutes (2 or 3 minutes), the signal comes back. I'm not on the move and I have strong signal.
When I use 2 GSM sims, such problem does not happen. It only happens when one sim card is WCDMA and the other is GSM.
I've changed the slots (First WCDMA, Second GSM / First GSM, Second WCDMA), but it doesn't help.
Does anyone else have such problem? Any idea how can I track the issue and solve it?
Thanks
Click to expand...
Click to collapse
This is a known issue of the stock rom. Using two WCDMA enabled sims solves the problem. I doubt if any of the custom ROMs, of which there aren' that many yet, will solve this issue.
Note that while using two WCDMA sims, it is not possible to use 3G on both the simcards, one will always run in GSM mode only.

nhtbrink said:
This is a known issue of the stock rom. Using two WCDMA enabled sims solves the problem. I doubt if any of the custom ROMs, of which there aren' that many yet, will solve this issue.
Note that while using two WCDMA sims, it is not possible to use 3G on both the simcards, one will always run in GSM mode only.
Click to expand...
Click to collapse
Hi there, thanks for this info. I currently have two sims,a 3 SIM and a Samba (internet only) sim that runs on the 3 network. My phone has the standard one sim slot GSM and other WCDMA.
I first tried my 3 SIM by itself in both the GSM and WCDMA slot and to my surprise it worked in both (in terms of 2G services). I thought that a 3 sim couldn't work in a GSM (2G) slot ? So I decided to leave the 3 sim in the GSM slot and then added the Samba sim into the WCDMA slot. However, when I turned the phone back on it connected to the Samba sim but the 3 sim said no network was available.
Any idea why this is ? Sorry if this has been asked before but I haven't been able to find an adequate explanation !

OnePlus Two - HSPA+ and 3G Data Connection Problem

Hi Everyone,
I'm usually just a reader on XDA, but I have found a problem that appears not to have been solved and wondered if anyone had any insight.
Problem Summary
When in an area (or network) with only HSPA and UMTS (strong HSPA/UMTS signal, but with no LTE or 2G available), the phone will drop from H+ to 3G erratically, always dropping the data connection. Traditional phone calls are not affected.
Detailed Description
I have a OnePlus Two and have 2 SIM cards. My first SIM Card is with Bell Canada (Virgin), and the second SIM Card is with WIND Mobile Canada.
Neither Bell nor WIND operate a 2G network, so the lowest the service can fall to is UMTS/3G.
Initially, I didn't notice the problem because Bell also operates an LTE network, and there is no problem with dropping the data connections when on LTE.
When I switched to the WIND SIM card (which only operates HSPA and UMTS), I noticed a problem where the phone would initially connect to H+, begin downloading whatever is needed (say, streaming music), but then part way through the download, the connection would switch to 3G, and the data would effectively stop. Within a minute, the service would jump back to H+ and download some more, but this cycle would continue (H+ --> 3G --> H+ --> 3G... ), with no way of knowing 1) how long the H+ connection would last before dropping to 3G (usually less than 30 seconds), and 2) after dropping to 3G, how long before going back to H+. This problem makes the phone almost useless when there is no LTE.
The most obvious troubleshooting I did was move to locations of better signal but I quickly ruled that out, as nothing seems to remove this problem. Other things I tried was to: move locations in the city, reboot phone, hard reset phone, flash most updated version of Oxygen, unlock bootloader, root, try the HSPA Keepalive app, swap SIM1 to SIM2, and many other things.
I originally thought this was a network issue, but I put this WIND SIM in another phone and there was no problem in any way that resembled this problem.
I also ruled out this being a network-specific problem, as I have taken a trip with the Bell SIM to an area where Bell does not have any LTE coverage (only HSPA and UMTS) and the same problem occurs on Bell as with the WIND SIM.
I have found people who had this problem on the OnePlus One tend to recommend using 2G to stabilize the connection, but this is not possible on Bell or WIND. That solution also would not provide adequate data speeds.
Remember this problem only affects data connectivity, as 3G traditional phone calls have no problems.
Question
Does anyone know if there is a way to adjust the conditions when the OnePlus Two will choose to switch from H+ to 3G?
Does anyone have any easier suggestions?
Thank you all in advance, because this rendering this phone almost useless when there is no LTE coverage.

I believe your problem is that phone it's dualsim standby, that means only one modem that alternates signal for both sims, I think normal would be alternating from faster network to slower network on sim without data.
Having to change to g3 between sims theres something stoped in the modem and data connection is also stopped.
You have no problem with voice calls because other sim is automatically turned off and unreachable.
There's nothing you can do if you're forced to only 3g on both sims
By 3g I mean 3g or h+ which to my knowledge are the same
Hope I was helpful and not wrong or more confusing
Sent from my ONE A2005 using Tapatalk

fburgos said:
I believe your problem is that phone it's dualsim standby, that means only one modem that alternates signal for both sims, I think normal would be alternating from faster network to slower network on sim without data.
Having to change to g3 between sims theres something stoped in the modem and data connection is also stopped.
You have no problem with voice calls because other sim is automatically turned off and unreachable.
There's nothing you can do if you're forced to only 3g on both sims
By 3g I mean 3g or h+ which to my knowledge are the same
Hope I was helpful and not wrong or more confusing
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
Thanks, I will try disabling the second SIM to see if there is a bug with the dual-sim...
What it currently does with the second SIM is it either shows "R" for roaming or just emergency only, but perhaps there is a software issue so I'll see if disabling the second SIM makes a difference.

biomedeng said:
Thanks, I will try disabling the second SIM to see if there is a bug with the dual-sim...
What it currently does with the second SIM is it either shows "R" for roaming or just emergency only, but perhaps there is a software issue so I'll see if disabling the second SIM makes a difference.
Click to expand...
Click to collapse
Though strange, this workaround fixes the issue. Thank you to fburgos for the suggestion!
So just in case anyone ever finds this issue creeps up on them, the solution is to DISABLE the SIM you are not using. It's not the most convenient workaround to swap SIMs, but the other SIM will be in Emergency Mode, so it really makes no functional difference.
On the technical side, it does appear that there is actually a bug in Android for a very uncommon network configuration. It will only appear in this exact configuration:
SIM1: Network has HSPA/3G only, no LTE or 2G to move to
SIM2: Network also only has HSPA/3G with no LTE or 2G
The non-data SIM does NOT connect to a roaming network (connects with "Emergency Only") - if it connects to a roaming 2G network, this problem does not happen.
The data SIM connects to HSPA/3G
Both SIMs are active
I'm not sure if this will happen anywhere else in the world other than having a WIND Mobile Canada SIM and Bell or TELUS Canada SIM
If anyone has insight on how to report this to Google, or someone else who can confirm my theory, that would be great!

Try this:
1. You need to make sure you have the correct LTE APN selected in mobile networks and LTE as preferred type.
2. Go to dialer and type in this: *#*#4636#*#*
3. Phone Information
4. Set Preferred Network Type to: LTE/GSM (PRL) - you an play with which one you wanna use but the one I said works for sure. on other roms I have" TD-SCDMA, GSM/WCDMA and LTE"
5. Now click TURN OFF RADIO and wait WAIT few secs. will that button turns to Turn Radio ON
6. Now TURN ON RADIO and wait
7. when u see the triangle for the signal is back, at least black , go down and lick SMSC REFRESH then UPDATE.
8. now just go back to APN settings and go into your LTE APN
9. Change Bearer to LTE

biomedeng said:
Hi Everyone,
I'm usually just a reader on XDA, but I have found a problem that appears not to have been solved and wondered if anyone had any insight.
Problem Summary
When in an area (or network) with only HSPA and UMTS (strong HSPA/UMTS signal, but with no LTE or 2G available), the phone will drop from H+ to 3G erratically, always dropping the data connection. Traditional phone calls are not affected.
Detailed Description
I have a OnePlus Two and have 2 SIM cards. My first SIM Card is with Bell Canada (Virgin), and the second SIM Card is with WIND Mobile Canada.
Neither Bell nor WIND operate a 2G network, so the lowest the service can fall to is UMTS/3G.
Initially, I didn't notice the problem because Bell also operates an LTE network, and there is no problem with dropping the data connections when on LTE.
When I switched to the WIND SIM card (which only operates HSPA and UMTS), I noticed a problem where the phone would initially connect to H+, begin downloading whatever is needed (say, streaming music), but then part way through the download, the connection would switch to 3G, and the data would effectively stop. Within a minute, the service would jump back to H+ and download some more, but this cycle would continue (H+ --> 3G --> H+ --> 3G... ), with no way of knowing 1) how long the H+ connection would last before dropping to 3G (usually less than 30 seconds), and 2) after dropping to 3G, how long before going back to H+. This problem makes the phone almost useless when there is no LTE.
The most obvious troubleshooting I did was move to locations of better signal but I quickly ruled that out, as nothing seems to remove this problem. Other things I tried was to: move locations in the city, reboot phone, hard reset phone, flash most updated version of Oxygen, unlock bootloader, root, try the HSPA Keepalive app, swap SIM1 to SIM2, and many other things.
I originally thought this was a network issue, but I put this WIND SIM in another phone and there was no problem in any way that resembled this problem.
I also ruled out this being a network-specific problem, as I have taken a trip with the Bell SIM to an area where Bell does not have any LTE coverage (only HSPA and UMTS) and the same problem occurs on Bell as with the WIND SIM.
I have found people who had this problem on the OnePlus One tend to recommend using 2G to stabilize the connection, but this is not possible on Bell or WIND. That solution also would not provide adequate data speeds.
Remember this problem only affects data connectivity, as 3G traditional phone calls have no problems.
Question
Does anyone know if there is a way to adjust the conditions when the OnePlus Two will choose to switch from H+ to 3G?
Does anyone have any easier suggestions?
Thank you all in advance, because this rendering this phone almost useless when there is no LTE coverage.
Click to expand...
Click to collapse
I have the same problem. Do you already have solved it?
I use only one SIM card so it is not a problem two cards.

really you do not have this problem? if no one knows the solution?

compared with my htc butterfly 2 and another low-end android, one plus 2 running latest Oxygen OS has serious connectivity issues. I compared the signals strength using same sim card in same location (including being connected to the same tower) and One Plus 2 keeps dropping the connection and has really poor signal strength. I have tried the *#*#4636#*#* and tried different network modes, but none of them are helping. Its a real disappointment that the basic feature of this phone is screwed up.
I have tried with CM13 as well. Any ideas if this is a modem version issue?

odeccacccp said:
Try this:
1. You need to make sure you have the correct LTE APN selected in mobile networks and LTE as preferred type.
2. Go to dialer and type in this: *#*#4636#*#*
3. Phone Information
4. Set Preferred Network Type to: LTE/GSM (PRL) - you an play with which one you wanna use but the one I said works for sure. on other roms I have" TD-SCDMA, GSM/WCDMA and LTE"
5. Now click TURN OFF RADIO and wait WAIT few secs. will that button turns to Turn Radio ON
6. Now TURN ON RADIO and wait
7. when u see the triangle for the signal is back, at least black , go down and lick SMSC REFRESH then UPDATE.
8. now just go back to APN settings and go into your LTE APN
9. Change Bearer to LTE
Click to expand...
Click to collapse
Did It.. But it seems like it didn't solve my problem..

No 4G/LTE with SM-G935FD

I have a new SM-G935FD purchased in the UAE. The software version is MMB29K.G935FXXU1APD1. The phone has a "United Arab Emirates" section in the About page.
I travel a lot. I generally use a local SIM when I am in a country for some time. Right now I am in France. I am using a SIM from Bouygues Telecom but I have no 4G/LTE service at all. The phone is connecting at H+ and also at 3G, but it is not showing 4G/LTE at all.
I will be in several other European countries as well as the US soon. I specifically purchased this phone because it has all the LTE bands for the countries I spend time in. This same SIM does give me LTE connections on Bouygues when I use it in my old phone (a Motorola X 2nd Gen). I had expected this phone to just work on LTE everywhere that I typically go.
I have looked through these forums and see a thread or two about others with LTE problems. But no clear solutions.
I have tried various apps such as LTE Discovery (no luck) as well as 4G LTE Switcher - using that if I set "LTE only", I get no service at all, and then have to reboot the phone before I get service back.
Is there something I need to do to get LTE?
Thanks.

Have you put the SIM in the correct slot?

liquidguru said:
Have you put the SIM in the correct slot?
Click to expand...
Click to collapse
Yes, the bottom slot. The SDcard is in the top slot. The SIM is showing in the phone as "SIM1".

Strange. I have a G935FD and it works with LTE no problems. I've used it in Singapore and Indonesia, with different SIMs and all work.
In Settings - Mobile Networks - Network Mode, it's set to LTE/3G/2G?

liquidguru said:
Strange. I have a G935FD and it works with LTE no problems. I've used it in Singapore and Indonesia, with different SIMs and all work.
In Settings - Mobile Networks - Network Mode, it's set to LTE/3G/2G?
Click to expand...
Click to collapse
Yes it is. I've tried changing to one of the non-LTE modes and back, but no change.
In the About device / Status / SIM Card status page, I see Mobile network type as UTMS. Shouldn't that have LTE and, if so, how do I change it?

Mine says the same, but I'm only connected to 3G at the moment, so I don't know if it's normal it not. I have a 4G card in, but I'm out of my area's 4G network range.
Edit: Actually I was connected to my wifi. Now I'm connected to my 3G and it says HSPA+ now
Edit again: Ok, so my phone is jumping between 3G and H+, which is what's changing.

liquidguru said:
Mine says the same, but I'm only connected to 3G at the moment, so I don't know if it's normal it not. I have a 4G card in, but I'm out of my area's 4G network range.
Edit: Actually I was connected to my wifi. Now I'm connected to my 3G and it says HSPA+ now
Edit again: Ok, so my phone is jumping between 3G and H+, which is what's changing.
Click to expand...
Click to collapse
Ah, mine is doing the same. I see Mobile network type jumping between UMTS and HSPA+ if I watch for a while. Obviously that field is a status field, not a setting field.
Thing is, I am in an area with full LTE coverage.
At least you seem to be confirming that this should work. Still need to figure out what the problem is.

I have the same Problem in Spain. With a Vodafone Card I dont have 4G Connection (The same card in a the Galaxy S5 of my wife works with 4G). But with a Yoigo Card I have 4G Connection. The software version is MMB29K.G935FXXU1BPH6. The phone has a "United Arab Emirates" section in the About page too. Any Idea?
Thanks

UMI Super 3G instead of 4G

Hi,
did anyone using Umi Super have any problems with using 4G at 800MHz? Im on giffgaff and even though Umi Super is supposed to work at 4G under 800MHz (thats what the specification states) i cant manage to make it work. I have perfect 4G coverage, 4G sim, 4G tariff, even gave my sim to a friend with S7 edge and it worked on his phone. Maybe new update will fix that? I tried with different sim from different operator (LYCA) and it works but 4G in LYCA is at 2100MHz so I didnt really check the 800. I tried everything and still nothing. Did anyone have similar problem?

I actually bought 2 phones of the same model so I decided to check if 4G worked on the other one and as I put the sim card in I just remembered something and realized same thing happened with my phone. When I put the SIM card in for the first time it DID automatically go to 4G, ok, when I looked for available networks it found O2 4G, granted BUT!!! when i got to "preferred network type" there is only 3G to pick, and THE MOMENT I PICK IT there is not possible to go back. Every network I find from that moment is only 2G or 3G. Now i reckon that a software problem right? See attachments

It is a software bug and I think I sort it out after flashing the phone. For now I sorted out the problem using Networks app by Philipp Mangalov and switching network to LTE/GSM auto

Well it seems the data part of the UMI SUPER is not so super, is it? I face a similar problem but worse. The 4G band of 800 doesn't work(despite being advertized by UMI as supported) but luckily the band of 2100 works without any issues. The problem comes when I'm out of 2100 band coverage and phone must switch to 3G - then I lose all data connectivity completely. So basically whenever I'm out of 4G 2100 coverage(which is often) I am without any connectivity! Anyone facing the same? Solution?

Indopilot said:
Well it seems the data part of the UMI SUPER is not so super, is it? I face a similar problem but worse. The 4G band of 800 doesn't work(despite being advertized by UMI as supported) but luckily the band of 2100 works without any issues. The problem comes when I'm out of 2100 band coverage and phone must switch to 3G - then I lose all data connectivity completely. So basically whenever I'm out of 4G 2100 coverage(which is often) I am without any connectivity! Anyone facing the same? Solution?
Click to expand...
Click to collapse
I only have 3G and the phone shows that I have internet, but when I try to actually use the data it just says no connection on apps.

zbysogi said:
Hi,
did anyone using Umi Super have any problems with using 4G at 800MHz? Im on giffgaff and even though Umi Super is supposed to work at 4G under 800MHz (thats what the specification states) i cant manage to make it work. I have perfect 4G coverage, 4G sim, 4G tariff, even gave my sim to a friend with S7 edge and it worked on his phone. Maybe new update will fix that? I tried with different sim from different operator (LYCA) and it works but 4G in LYCA is at 2100MHz so I didnt really check the 800. I tried everything and still nothing. Did anyone have similar problem?
Click to expand...
Click to collapse
I don't have this issue at all. My UMi Super connects perfectly to my 4g network under 800MHz without an issue here in Uganda. You can install the MTK Engineering app from the play store and check the band compatibility on ur device and you can also set the mode using the same app under android settings.
You could also try updating to the latest OTA which is 20160810 or the one before it by downloading the files from forum post here and saving them to ur phone and updating manually if you don't have the current OTA

sachak said:
I don't have this issue at all. My UMi Super connects perfectly to my 4g network under 800MHz without an issue here in Uganda. You can install the MTK Engineering app from the play store and check the band compatibility on ur device and you can also set the mode using the same app under android settings.
You could also try updating to the latest OTA which is 20160810 or the one before it by downloading the files from forum post here and saving them to ur phone and updating manually if you don't have the current OTA
Click to expand...
Click to collapse
GravityBox is a perfect solution for this problem. You can set up an icon in notification bar allowing You to toggle between 2G/3G/4G

zbysogi said:
I actually bought 2 phones of the same model so I decided to check if 4G worked on the other one and as I put the sim card in I just remembered something and realized same thing happened with my phone. When I put the SIM card in for the first time it DID automatically go to 4G, ok, when I looked for available networks it found O2 4G, granted BUT!!! when i got to "preferred network type" there is only 3G to pick, and THE MOMENT I PICK IT there is not possible to go back. Every network I find from that moment is only 2G or 3G. Now i reckon that a software problem right? See attachments
Click to expand...
Click to collapse
same problem

This is indeed a software issue, one I have come accross many times - using an app to toggle between the service types is the best workaround!
There are many apps that work to resolve this, some great ones have already been mentioned.

TerryWebbs said:
This is indeed a software issue, one I have come accross many times - using an app to toggle between the service types is the best workaround!
There are many apps that work to resolve this, some great ones have already been mentioned.
Click to expand...
Click to collapse
Could you tell me some app that resolve this?
Thanks

I've got a UMI Super and had this issue as well:
try this app:
Network by Philipp Mangelow
https://play.google.com/store/apps/details?id=de.mangelow.network

4g Umi Super on Giff Gaff
You need Giff Gaff settings in access point name. If you try and use O2 4g it doesn't work even though Giff Gaff uses O2 network. Settings are really easy to input but MUST be Giff Gaff not O2.
zbysogi said:
I actually bought 2 phones of the same model so I decided to check if 4G worked on the other one and as I put the sim card in I just remembered something and realized same thing happened with my phone. When I put the SIM card in for the first time it DID automatically go to 4G, ok, when I looked for available networks it found O2 4G, granted BUT!!! when i got to "preferred network type" there is only 3G to pick, and THE MOMENT I PICK IT there is not possible to go back. Every network I find from that moment is only 2G or 3G. Now i reckon that a software problem right? See attachments
Click to expand...
Click to collapse

There is a fix on rooted phones by using GravityBox and switching between 2G/3G/4G
Thread can be closed.

4G on a Umi Super on GiffGaff.
zbysogi said:
There is a fix on rooted phones by using GravityBox and switching between 2G/3G/4G
Thread can be closed.
Click to expand...
Click to collapse
All that's needed is GiffGaff settings inputing manually. Very easy to do. O2 settings that the phone recognises when a GiffGaff sim is used WILL NOT WORK. The Network is O2 but the APN settings for GiffGaff are totally different.
All you guys that think you know what you're doing obviously don't.
No need to Root or use GravityBox or any other App.

Maz Jones said:
All that's needed is GiffGaff settings inputing manually. Very easy to do. O2 settings that the phone recognises when a GiffGaff sim is used WILL NOT WORK. The Network is O2 but the APN settings for GiffGaff are totally different.
All you guys that think you know what you're doing obviously don't.
No need to Root or use GravityBox or any other App.
Click to expand...
Click to collapse
Well said. I just shake my head in despair when I see how totally clueless people try to be teachers and Internet gurus with very limited knowledge about the task at hand. These comments should come with warning stickers.

For those who want to be able to switch between 3G/4G and LTE only, use this nifty little APK that I've attached below. It will allow you to enter engineer mode without using the dial code.

Hi
This is a bug implemented in Android 7.0.
I had the same.
1 Just force in your parameters 2G/3G networks
2 wait for network authentification (no more excalamtion mark)
3 go back to 4G
Every thing will be OK to next switch off or plane mode.
Rgds,

LTE band 7 (2600) not working
I recently received my new Umi Super and updated to the last firmware V7.01_20170413, everything works fine except for the 4G. I live in an area where band 7 (2600) is available but the phone can't connect to it. Of course, my preferred network type is set to 4G/3G/2G (auto).
I read a lot about the issue on the internet but I can't find a solution.
I checked the BandMode on the phone by dialing *#*#3646633#*#*, band 7 is included and checked. However, when I tried to remove the other LTE bands and keep only band 7, I got a message explaining that the list can't be empty ("Failed. The band is changed from not null to null, it is illegal"), though the list was not completely empty because band 7 was still selected.
Also, I tried to change the radio band by dialing *#*#4636#*#*, but process com.android.phone stopped working when I pressed "select radio band", even after I cleared cache in phone and sim apps.
Can anyone tell me how to fix the problem and get connected to 4G.
BTW, Network by Philipp Mangelow is not available anymore. Switching between 3G/2G and 4G/3G/2G settings doesn't fix the issue. I tried the giffgaff settings, but the APN gets deleted as soon as I try to save it.
Thanks

bemo00 said:
I recently received my new Umi Super and updated to the last firmware V7.01_20170413, everything works fine except for the 4G. I live in an area where band 7 (2600) is available but the phone can't connect to it. Of course, my preferred network type is set to 4G/3G/2G (auto).
I read a lot about the issue on the internet but I can't find a solution.
I checked the BandMode on the phone by dialing *#*#3646633#*#*, band 7 is included and checked. However, when I tried to remove the other LTE bands and keep only band 7, I got a message explaining that the list can't be empty ("Failed. The band is changed from not null to null, it is illegal"), though the list was not completely empty because band 7 was still selected.
Also, I tried to change the radio band by dialing *#*#4636#*#*, but process com.android.phone stopped working when I pressed "select radio band", even after I cleared cache in phone and sim apps.
Can anyone tell me how to fix the problem and get connected to 4G.
BTW, Network by Philipp Mangelow is not available anymore. Switching between 3G/2G and 4G/3G/2G settings doesn't fix the issue. I tried the giffgaff settings, but the APN gets deleted as soon as I try to save it.
Thanks
Click to expand...
Click to collapse
You may try to force 3G and then try to force 4G
You may try to user another IMEI number from a UMI device with 2600 support (of course backup/write down the original one before just in case)
http://www.ucc.co.ug/data/imei/2
After the update to Nougat 7.x how long does it take to do a full recharge?
Do you still have fast charge feature (< 1 hour) or do you lost it like all users reported so far?
What about your GPS? Do you have a fast fix after cleaning history and is it reliable (not losing signal often?).

SimurghXDA said:
You may try to force 3G and then try to force 4G
You may try to user another IMEI number from a UMI device with 2600 support (of course backup/write down the original one before just in case)
http://www.ucc.co.ug/data/imei/2
After the update to Nougat 7.x how long does it take to do a full recharge?
Do you still have fast charge feature (< 1 hour) or do you lost it like all users reported so far?
What about your GPS? Do you have a fast fix after cleaning history and is it reliable (not losing signal often?).
Click to expand...
Click to collapse
Is it safe to change the IMEI number? and where can I find another number for a UMI device?
GPS is working fine, it fixes pretty fast, but I'm not sure about interruption in the signal because I haven't used it enough yet

No 3g or 2g after *#*#4636#*#* Radio Band selected

Hi guys...
Could really use some help here...
I was facing some issues with my 4g network... So I went to the *#*#4636#*#* menu and turned off radio etc...
I usually did this when my 4g network would give me problems.
However last time I had some time in my hand and decided to see what other options are there. SO I went to the Radio Band option and I don't remember what I chose but ever since then my phone can detect only 4g on either sim. No 3g no 2g.
I went to the radio band menu again and have tried selecting all options but nothing seems to work... I get USA band and then BAND MODE 31,32, 33 all the way up to 42...
Please help me...

I am new to posting in the forum. So I can't figure out how to attach images.

[email protected] said:
Hi guys...
Could really use some help here...
I was facing some issues with my 4g network... So I went to the *#*#4636#*#* menu and turned off radio etc...
I usually did this when my 4g network would give me problems.
However last time I had some time in my hand and decided to see what other options are there. SO I went to the Radio Band option and I don't remember what I chose but ever since then my phone can detect only 4g on either sim. No 3g no 2g.
I went to the radio band menu again and have tried selecting all options but nothing seems to work... I get USA band and then BAND MODE 31,32, 33 all the way up to 42...
Please help me...
Click to expand...
Click to collapse
i had this problem i was also playing with the radio bands in the service menu follow these steps and surely you will get 2g coverage.
1. make sim 1 and as primary and then open service menu by *#*#4636#*#*.
and then select radio bands from top right corner and select radio band 42
2. now switch the sim cards in the sim slot and repeat the whole process from step 1 surely you will signals on both sim.

[email protected] said:
Hi guys...
Could really use some help here...
I was facing some issues with my 4g network... So I went to the *#*#4636#*#* menu and turned off radio etc...
I usually did this when my 4g network would give me problems.
However last time I had some time in my hand and decided to see what other options are there. SO I went to the Radio Band option and I don't remember what I chose but ever since then my phone can detect only 4g on either sim. No 3g no 2g.
I went to the radio band menu again and have tried selecting all options but nothing seems to work... I get USA band and then BAND MODE 31,32, 33 all the way up to 42...
Please help me...
Click to expand...
Click to collapse
just do factory reset and flash full oxygen rom and setings will reset

SOLVED!!!!
abukwr92 said:
i had this problem i was also playing with the radio bands in the service menu follow these steps and surely you will get 2g coverage.
1. make sim 1 and as primary and then open service menu by *#*#4636#*#*.
and then select radio bands from top right corner and select radio band 42
2. now switch the sim cards in the sim slot and repeat the whole process from step 1 surely you will signals on both sim.
Click to expand...
Click to collapse
You sir are a genius... May you live long and prosper...

Something related
Ok.... now I have network on both sims, 4g as well as 3g and 2g... however now my data connection only works on SIM2... when i use the same SIM on SIM1, theres just an exclamation mark beside LTE (or H or E) and no internet... But when i use SIM slot 2 with the same SIM, voila !!! I have data...
Whats the issue...

I went from oxygenOS to cm13 and I having issues after couple mins I fall back HSPA+