Honor India - RAM Management and VoLTE bug fix update (B370) - Honor 5X Guides, News, & Discussion

Honor India released an update today for its KIW-L22 - B370.
Link - http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v67983/f1/full/update.zip
This update consists of
1. VoLTE bug fixes
2. RAM Management improvements.
3. Android Security Patches
How to update?
Prerequisites: You should be in the B360 in order to update this one.
Note: B360 was causing the bootloop for custom ROM. Since this is built over that this might also cause Bootloop.
So have a TWRP backup before updating to this one too.
This update can be flashed via TWRP. Forced update won't work.
You can update by following steps by @gopinaidu77 here - http://forum.xda-developers.com/honor-5x/how-to/guide-force-installing-stock-ota-t3502874
But you need to be Rooted for it.

i havent got any update, checked right now..
anyway i downloaded the zip given, i dont understand y is that a flashable zip? it contains several patches and an update.app file..
is it twrp flashable too??
and even after updating, my build number is still b360

thilak devraj said:
i havent got any update, checked right now..
anyway i downloaded the zip given, i dont understand y is that a flashable zip? it contains several patches and an update.app file..
Click to expand...
Click to collapse
Place the update.zip in dload and flash it.
So that patches get applied. Sorry for that. Little bit sleepy.
Thanks for noting it... Updated the post...

vsriram92 said:
Place the update.zip in dload and flash it.
So that patches get applied. Sorry for that. Little bit sleepy.
Thanks for noting it... Updated the post...
Click to expand...
Click to collapse
That's way update.zip doesn't work. Just open file manager, go to internal storage and open HwOUC folder and tell me the folder name inside HwOUC folder or give a screenshot

rajibie said:
That's way update.zip doesn't work. Just open file manager, go to internal storage and open HwOUC folder and tell me the folder name inside HwOUC folder or give a screenshot
Click to expand...
Click to collapse
I have tried with update.zip earlier in my Honor 7. So Update.zip works as per my knowledge.
However I'm not sure, as I have not tried it for this one Since I don't have KIW-L22.
I have KIW-L23 which is stuck at EMUI 3.

vsriram92 said:
I have tried with update.zip earlier in my Honor 7. So Update.zip works as per my knowledge.
However I'm not sure, as I have not tried it for this one Since I don't have KIW-L22.
I have KIW-L23 which is stuck at EMUI 3.
Click to expand...
Click to collapse
From dload folder update.zip works only on emui 3 not in emui 4 or 4.1. So waiting for update notification

vsriram92 said:
Place the update.zip in dload and flash it.
So that patches get applied. Sorry for that. Little bit sleepy.
Thanks for noting it... Updated the post...
Click to expand...
Click to collapse
even after placing update.zip in dload and flashing, my build number, still, is b360

thilak devraj said:
even after placing update.zip in dload and flashing, my build number, still, is b360
Click to expand...
Click to collapse
Because the file doesn't flashed. So b370 patches are not applied.

@vsriram92 , please check, the update package is not working,,
though update process completes, it actually does nothing, even after trying 3 times, my build number hasnt changed from b360

thilak devraj said:
@vsriram92 , please check, the update package is not working,,
though update process completes, it actually does nothing, even after trying 3 times, my build number hasnt changed from b360
Click to expand...
Click to collapse
I don't have Honor 5X (Kiw-L22) to verify it. You must wait for the OTA.
You can flash this update via TWRP.

does this work for non root users?

hemanth.k said:
does this work for non root users?
Click to expand...
Click to collapse
Nope. There is no way to update locally as in EMUi 3. So without ROOT, you can't.

vsriram92 said:
Honor India released an update today for its KIW-L22 - B370.
Link - http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v66660/f1/full/update.zip
This update consists of
1. VoLTE bug fixes
2. RAM Management improvements.
3. Android Security Patches
How to update?
Prerequisites: You should be in the B360 in order to update this one.
Note: B360 was causing the bootloop for custom ROM. Since this is built over that this might also cause Bootloop.
So have a TWRP backup before updating to this one too.
This update can be flashed via TWRP. Forced update won't work.
Click to expand...
Click to collapse
Force update through stock recovery works my friend.

gopinaidu77 said:
Force update through stock recovery works my friend.
Click to expand...
Click to collapse
Rooting is needed for that right?
Here is a post by for updating OTA by @gopinaidu77.:good:
http://forum.xda-developers.com/honor-5x/how-to/guide-force-installing-stock-ota-t3502874

gopinaidu77 said:
Force update through stock recovery works my friend.
Click to expand...
Click to collapse
Does this have Bootloop like B360 if any custom ROM installed?

vsriram92 said:
Does this have Bootloop like B360 if any custom ROM installed?
Click to expand...
Click to collapse
Ofc , its an update to b360 right ! As it has big changes with modem , same will be reflected to b370

tried to flash it with twrp but zip signature verification failed...even if zip verification skip it say install failed

rbtrai said:
tried to flash it with twrp but zip signature verification failed...even if zip verification skip it say install failed
Click to expand...
Click to collapse
Try updating using the below given method without rooting. Many Thanks to @schluk
http://forum.xda-developers.com/honor-8/how-to/sympathic-to-upgrade-to-nougat-t3510275
Remember to replace all FRD version with your KIW version and its appropriate build No and links.

Is this official? because I couldn't find anything on Honor official sites

Link not working

Related

Honor 6 PLUS - NEW UPDATE!!

Hello everyone, today for the Honor 6 Plus is a new OTA is the C432B571 some people have jumped him via OTA and others not so you can download the update I put and upgrade to the latest version which is the PE-TL10C432B571.
Instructions: download, unzip and copy the folder dload update.app in SD.
LINK http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v55895/f1/full/update.zip
Awesome..!! This is just like the B190 OTA update for Honor 7.
So they are updating the Lollipop version for their devices too, this is the first approach like this I have seen.
This is an update improving mm is passed from the B560, B571 this new update
Does this work on honor 6 too?
Dynos said:
Does this work on honor 6 too?
Click to expand...
Click to collapse
No, it's for the plus
Damn, any word on when h6 gets this?
I'm on the PE-TL10C432B560 but when I tried to update it gave me "FAILED TO UPGRADE" and I was forced to restart my H6+.
Did you get the same error?
I placed my update.app in a dload folder, inside my External SD Card.
Thanks in advance
fefferico said:
I'm on the PE-TL10C432B560 but when I tried to update it gave me "FAILED TO UPGRADE" and I was forced to restart my H6+.
Did you get the same error?
I placed my update.app in a dload folder, inside my External SD Card.
Thanks in advance
Click to expand...
Click to collapse
Have you stock boot and recovery partitions? No root?
If you have, you must remove Supersu (select full unroot), flash stock partitions and then do the update.
If you don't have root, consider first and foremost a backup with Huawei Backup. Then download the zip file from here and follow the instructions.
zinko_pt said:
Have you stock boot and recovery partitions? No root?
If you have, you must remove Supersu (select full unroot), flash stock partitions and then do the update.
If you don't have root, consider first and foremost a backup with Huawei Backup. Then download the zip file from here and follow the instructions.
Click to expand...
Click to collapse
Thanks a lot mate!
With the link you provided I was able to successfully upgrade my H6+
Anyway I'm still official, no root, no unlocked bootloader.... strange considering that I lost my MotoG1 warranty after a week
Thanks again
I have downloaded the zip (didn't extract it) and i have created /dload file in internal memory and put that zip inside it, then i have open updater and select that zip and my 6+ enter in installing mode, but it stuck at 99% and it doesn't continue, someone knows whats wrong with it ?
You should have extracted it.
Extract the zip file unitl you have an update.app and put this into your dload folder. Then try updating again with force update method. If this doesn´t work
zinko_pt said:
Have you stock boot and recovery partitions? No root?
If you have, you must remove Supersu (select full unroot), flash stock partitions and then do the update.
If you don't have root, consider first and foremost a backup with Huawei Backup. Then download the zip file from here and follow the instructions.
Click to expand...
Click to collapse
Hello Zinko_pt,
I have the PE-TL10C900B331 and my phone shows me the PE-TL10C432B571 to update. If I run the automatic update it is not working. At 1% the installing stops and phone reboots.
I tried the german site with the zip and force installing but it is the same
Could you help me? No root phone
Thank you in advance
ofczi said:
Hello Zinko_pt,
I have the PE-TL10C900B331 and my phone shows me the PE-TL10C432B571 to update. If I run the automatic update it is not working. At 1% the installing stops and phone reboots.
I tried the german site with the zip and force installing but it is the same
Could you help me? No root phone
Thank you in advance
Click to expand...
Click to collapse
First I would try to get an update file that I could check its integrity either by MD5 or other form of verification. That would ruled out corrupted file cause.
Second, I would backup all my important things with native Huawei backup app into SD or PC. The I would perform a factory reset and setup just the Google account and Huawei ID if your ROM has one. Also setup HiCare app. Make sure all are updated. Then try to check update and if it works, great, if it doesn´t then try force update.
Only after update I would restore backup.
May I please ask what are the changes in this update? I am a huawei honor 6 plus user.
Thank you in advance for your response!
Does this work on PE-TL10C185B561 ?
As i worked on the steps but it stops at 5% although there is enough free space & battery charge
assemaskar said:
Does this work on PE-TL10C185B561 ?
As i worked on the steps but it stops at 5% although there is enough free space & battery charge
Click to expand...
Click to collapse
No, only it works in PE-TL10C432
zinko_pt said:
First I would try to get an update file that I could check its integrity either by MD5 or other form of verification. That would ruled out corrupted file cause.
Second, I would backup all my important things with native Huawei backup app into SD or PC. The I would perform a factory reset and setup just the Google account and Huawei ID if your ROM has one. Also setup HiCare app. Make sure all are updated. Then try to check update and if it works, great, if it doesn´t then try force update.
Only after update I would restore backup.
Click to expand...
Click to collapse
Thanks it works! Factory reset was needed. I think the problem was, that I encrypted the phone itself before.
ofczi said:
Thanks it works! Factory reset was needed. I think the problem was, that I encrypted the phone itself before.
Click to expand...
Click to collapse
From my experience, encrypted phones don´t go along with automatic turn on/off and updates.
oh.joan said:
May I please ask what are the changes in this update? I am a huawei honor 6 plus user.
Thank you in advance for your response!
Click to expand...
Click to collapse
If you're already on MM, it's just bug fixes and optimizations
Hi
my device run on PE-TL10C185B510, does this update work and what new features it will add?

[For FRD-L14 Users] Here is how to restore/downgrade to EMUI 4.1/MM Build

So, just like others I have been itching to install the Nougat beta and boy what a ride I had. I used the Charles method and installed the beta successfully. While install was great, the software was not. I had several things missing and It did not go well.
First and foremost, beta is ONLY for FRD-L04 models which is the US 32GB single sim version and NOT for the FRD-L14 64GB models. The beta build really screwed up my phone and I had to downgrade to official MM build. The software doesn't really tell there is a mismatch in the model as technically they are the same specs except for the storage.
To downgrade, I read this thread and then downloaded and restored from the image from the Honor 8 downloads page. Restored to MM successfully but guess what, my model number showed FRD-L04 and not FRD-L14. This was a problem. Why? Well, it turns out when you set up Android Pay, it clearly tells that I am running a custom ROM. While all day to day function work right, you are still running a custom rom as you are not running the software for FRD-L14.
Honor 8 site does not have the restore image in their downloads page. I called their support and they acknowledged that the restore image available is not for FRD-L14. They are working on it to see why they don't have this image available for download.
So, how do you restore?
Thanks to this thread, I was able to get the full image. Below are the links:
1. update.zip
2. update_data_full_hw_usa.zip (only if you need the bloat)
Download those and flash them from SD card as described in this thread. That will get you the MM build. Below is the build number you should be if you are in MM:
- FRD-L14C567B162
Hope tha helps.
@digitalbreak
Although your post is very informative your missing some key elements.
Where is your Rollback Update.app zip ?
The correct way to restore MM from Nougat is to flash rollback and then your last full update.zip (B162 ?)
you could try the one for the L04 here >> http://download-c.huawei.com/download/downloadCenter?downloadId=92098&version=360320&siteCode=us
the link you posted to FRD-L04, Android 6.0, EMUI 4.1, C567B122 is useless and just makes it confusing
Also flashing the update_data_full_hw_usa.zip is how you update the /cust partition
that's where your Local.prop is stored and that's where your phone gets the information displayed in the Settings / About screens.
So if you had not previously changed the /cust their would be no need to flash it again after the Full update.app is flashed.
You would be able to tell this if your Settings/About screens are wrong after the flash.
Also you state that using the Charles method did not go well ? That's really not possible, because this method downloads the files directly from Huawei servers
and the update is the same as if the OTA were pushed to your phone. Only real way to mess that up is to input the wrong response in Charles App and download the wrong update. If you had linked the correct FRD-L14C567B360 file in Charles you would have had no problems.
Bottom line
If your on Nougat Beta and you want to return to MM
you simply dload flash the Rollback and then the Full B162
and you should be back to stock. If Settings / About is incorrect
dload flash the update.app inside the update_data_full_hw_usa.zip
And just for reference here are all the files available for you phone >> http://hwmt.ru/oth/HWFF/info/view.php?find_model=frd-L14
And to get the correct update_data_full_hw_usa.zip for each version
just edit the update.zip download link
Code:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v72029/f1/full/update.zip
to http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v72029/f1/full/[COLOR="Red"]hw/usa/update_data_full_hw_usa.zip[/COLOR]
The correct way to restore MM from Nougat is to flash rollback and then your last full update.zip (B162 ?)
you could try the one for the L04 here >> http://download-c.huawei.com/downloa...20&siteCode=us
Click to expand...
Click to collapse
Unfortunately that doesn't help for FRD-L14, at least for me as it didnt succeed. I tried the included manual step by step but it did not restore to MM.
Also flashing the update_data_full_hw_usa.zip is how you update the /cust partition
that's where your Local.prop is stored and that's where your phone gets the information displayed in the Settings / About screens.
So if you had not previously changed the /cust their would be no need to flash it again after the Full update.app is flashed.
You would be able to tell this if your Settings/About screens are wrong after the flash.
Click to expand...
Click to collapse
If I am not wrong, when you use Charles method and download the update, it applies those and hence since I had pulled L04 update into my L14, the /cust was changed by the OTA.
Also you state that using the Charles method did not go well ? That's really not possible, because this method downloads the files directly from Huawei servers
Click to expand...
Click to collapse
In the sense that I had pulled the update for the wrong model. It was hard to find that the beta program was only for FRD-L04 and not for FRD-L14. And that thread is so long it is difficult to even guess that if you are a newcomer.
If your on Nougat Beta and you want to return to MM
you simply dload flash the Rollback and then the Full B162
and you should be back to stock. If Settings / About is incorrect
dload flash the update.app inside the update_data_full_hw_usa.zip
Click to expand...
Click to collapse
In theory yes and works well for FRD-L04. I couldnt find the builds in Honor's web site for FRD-L14. Getting to know the servers from other methods is OK, but thats not how most customers do. We geeks do that
digitalbreak said:
Unfortunately that doesn't help for FRD-L14, at least for me as it didnt succeed. I tried the included manual step by step but it did not restore to MM.
If I am not wrong, when you use Charles method and download the update, it applies those and hence since I had pulled L04 update into my L14, the /cust was changed by the OTA.
In the sense that I had pulled the update for the wrong model. It was hard to find that the beta program was only for FRD-L04 and not for FRD-L14. And that thread is so long it is difficult to even guess that if you are a newcomer.
In theory yes and works well for FRD-L04. I couldnt find the builds in Honor's web site for FRD-L14. Getting to know the servers from other methods is OK, but thats not how most customers do. We geeks do that
Click to expand...
Click to collapse
I can do the rollback but I just realized that I have the 64GB version which is the FRD-L14
http://www.phonemore.com/huawei-honor-8/models/629
I'm not sure if there is a FRD-L14(64GB) variant of the MM firmware available anywhere. If so, I'm not aware of the link of the site to find it. Secondly, if I do install the FRD-L04(32GB) variant of the MM firmware would that create problems for the phone in upgrading and later trying to root and install custom ROM etc.
Much Thanks
Installing the FDR-L04 image on FDR-L14 will tell Google that you are using an unidentified or a custom ROM version. That will limit certain services/apps like for example Android Pay and even sometimes updater to work. Android Pay certainly didn't work for me. Some say its just a file that contains the hardware info that needs to change while the rest are the same, but I have had no luck with that approach.
digitalbreak said:
Installing the FDR-L04 image on FDR-L14 will tell Google that you are using an unidentified or a custom ROM version. That will limit certain services/apps like for example Android Pay and even sometimes updater to work. Android Pay certainly didn't work for me. Some say its just a file that contains the hardware info that needs to change while the rest are the same, but I have had no luck with that approach.
Click to expand...
Click to collapse
When you rolled back your L14, do you have service like Android Pay? I really want to roll-back since Nougat/EMUI5 have been terrible on battery life. Is it "legitimately" L14 with the 64GB storage?
digitalbreak said:
So, just like others I have been itching to install the Nougat beta and boy what a ride I had. I used the Charles method and installed the beta successfully. While install was great, the software was not. I had several things missing and It did not go well.
First and foremost, beta is ONLY for FRD-L04 models which is the US 32GB single sim version and NOT for the FRD-L14 64GB models. The beta build really screwed up my phone and I had to downgrade to official MM build. The software doesn't really tell there is a mismatch in the model as technically they are the same specs except for the storage.
To downgrade, I read this thread and then downloaded and restored from the image from the Honor 8 downloads page. Restored to MM successfully but guess what, my model number showed FRD-L04 and not FRD-L14. This was a problem. Why? Well, it turns out when you set up Android Pay, it clearly tells that I am running a custom ROM. While all day to day function work right, you are still running a custom rom as you are not running the software for FRD-L14.
Honor 8 site does not have the restore image in their downloads page. I called their support and they acknowledged that the restore image available is not for FRD-L14. They are working on it to see why they don't have this image available for download.
So, how do you restore?
Thanks to this thread, I was able to get the full image. Below are the links:
1. update.zip
2. update_data_full_hw_usa.zip (only if you need the bloat)
Download those and flash them from SD card as described in this thread. That will get you the MM build. Below is the build number you should be if you are in MM:
- FRD-L14C567B162
Hope tha helps.
Click to expand...
Click to collapse
I just tried this method to get back to MM from N B360. Unfortunately the software always failed with the error: "Software install failed! Incompatibility with current version. Please download the correct update package!" I downloaded the file from your link and confirmed the MD5 hash is correct. Did I miss something? I am currently running the OFFICIAL Nougat B360 on FRD-L14. Thank you.
KevinN206 said:
I just tried this method to get back to MM from N B360. Unfortunately the software always failed with the error: "Software install failed! Incompatibility with current version. Please download the correct update package!" I downloaded the file from your link and confirmed the MD5 hash is correct. Did I miss something? I am currently running the OFFICIAL Nougat B360 on FRD-L14. Thank you.
Click to expand...
Click to collapse
Did you install the rollback image first from the Honor site? Not the full one, just the rollback package. Once you install that, then you can install the full package.
digitalbreak said:
Did you install the rollback image first from the Honor site? Not the full one, just the rollback package. Once you install that, then you can install the full package.
Click to expand...
Click to collapse
Are you talking about the rollback package here? Is this the same rollback for the L14? The description says it's for L04. http://www.hihonor.com/us/support/details/index.html?DOC_ID=92098
How do I flash this rollback image and in what order compared to UPDATE.APP?
I will research into this more when I get home from work tonight. Thank you!
KevinN206 said:
Are you talking about the rollback package here? Is this the same rollback for the L14? The description says it's for L04. http://www.hihonor.com/us/support/details/index.html?DOC_ID=92098
How do I flash this rollback image and in what order compared to UPDATE.APP?
I will research into this more when I get home from work tonight. Thank you!
Click to expand...
Click to collapse
I had an issue with this yesterday too.
If you still have access to TWRP, try deleting the data partition too. I think that sets it to a test mode than you can then downgrade.
From there I used the dload method to flash the rollback package, and then I flashed a full MM package.
I really wish Huawei would release a damn full Nougat image so we didn't have to do this each time (unless you really want to go back to MM)
SolarisSixth said:
I had an issue with this yesterday too.
If you still have access to TWRP, try deleting the data partition too. I think that sets it to a test mode than you can then downgrade.
From there I used the dload method to flash the rollback package, and then I flashed a full MM package.
I really wish Huawei would release a damn full Nougat image so we didn't have to do this each time (unless you really want to go back to MM)
Click to expand...
Click to collapse
I downloaded the rollback image except the instruction mentions L04. Is okay to install this rollback image on the L14 with 64GB? My phone was never part of Nougat beta and I don't have root. Never installed TWRP.
I just want to go back to MM because Nougat on my L14 has been a disaster on battery life. It also caused my audio to skip especially spotify when stream to bluetooth and I try to use the Internet.
KevinN206 said:
I downloaded the rollback image except the instruction mentions L04. Is okay to install this rollback image on the L14 with 64GB?
Click to expand...
Click to collapse
Yup. Like I said, same issue. I have the L14 and that package is only for the L04.
I flashed it and seemed ok. Although I still think that wiping the data partition maybe had something to do with it.
Good luck either way!
I want to downgrade myself but don't want to mess up my phone. Huawei is really stupid of just putting the downgrade package only for the 32gb version of the phone.
Rollback image is Ok but don't download the full image as that is the one tied to L04.
I chatted with Honor support twice to give us a L14 image and they haven't done it yet. I would really ask you guys to do the same if you can as that will put pressure on them.
digitalbreak said:
Rollback image is Ok but don't download the full image as that is the one tied to L04.
I chatted with Honor support twice to give us a L14 image and they haven't done it yet. I would really ask you guys to do the same if you can as that will put pressure on them.
Click to expand...
Click to collapse
I have good news. The rollback image for L04 worked fine on my L14. After flashing that, I was able to install the actual update from your link. My phone is still identified as L14 and the 64GB is intact. My Android Pay is fully functional. Thank you very much.
Glad it worked for you!
frommars6 said:
I want to downgrade myself but don't want to mess up my phone. Huawei is really stupid of just putting the downgrade package only for the 32gb version of the phone.
Click to expand...
Click to collapse
I have the L14 64GB version and the downgrade was actually flawless. You will need to download the main update file per OP and also download the rollback image for the L04 from my prior post. It's a compressed RAR file so you can use 7zip to decompress. Ignore the instruction inside the file. My rollback went without a hitch but my phone is not rooted and no TWRP installed. Everything is stock so YMMV.
Create a folder "dload" in your micro SD card and copy in the UPDATE.APP from the rollback image. This file is about 67 MB.
Turn-off the phone.
Press Vol+, Vol-, and Power Button simultaneously until it turns on. Keep them all pressed until you see the update screen. You can release the buttons when you see them. The rollback image takes about 30-60 seconds to complete. The phone will reboot when completed.
The phone will restart back into Android. Turn-off the phone and remove the micro SD card.
Delete UPDATE.APP rollback image (67 MB) from folder dload.
Copy the UPDATE.APP file from the L14 image into dload. The file is about 3 GB after decompression.
Re-insert micro SD into phone and restart per step # 3.
The update screen will appear and it'll start to install the L14 image.
I believe it'll auto restart after completion (don't remember). The entire process should take 5-10 minutes.
Congratulations!!! Now you are back to MM.
KevinN206 said:
I have the L14 64GB version and the downgrade was actually flawless. You will need to download the main update file per OP and also download the rollback image for the L04 from my prior post. It's a compressed RAR file so you can use 7zip to decompress. Ignore the instruction inside the file. My rollback went without a hitch but my phone is not rooted and no TWRP installed. Everything is stock so YMMV.
Create a folder "dload" in your micro SD card and copy in the UPDATE.APP from the rollback image. This file is about 67 MB.
Turn-off the phone.
Press Vol+, Vol-, and Power Button simultaneously until it turns on. Keep them all pressed until you see the update screen. You can release the buttons when you see them. The rollback image takes about 30-60 seconds to complete. The phone will reboot when completed.
The phone will restart back into Android. Turn-off the phone and remove the micro SD card.
Delete UPDATE.APP rollback image (67 MB) from folder dload.
Copy the UPDATE.APP file from the L14 image into dload. The file is about 3 GB after decompression.
Re-insert micro SD into phone and restart per step # 3.
The update screen will appear and it'll start to install the L14 image.
I believe it'll auto restart after completion (don't remember). The entire process should take 5-10 minutes.
Congratulations!!! Now you are back to MM.
Click to expand...
Click to collapse
I did follow your steps, but my keyboard has now vanished when the set up screen appears. It only shows google voice and I'm having trouble setting up my phone. Has anyone had the same problem. What can I do to get my keyboard back?
Note: my phone is unrooted. Not sure if that makes a difference
KevinN206 said:
I have the L14 64GB version and the downgrade was actually flawless. You will need to download the main update file per OP and also download the rollback image for the L04 from my prior post. It's a compressed RAR file so you can use 7zip to decompress. Ignore the instruction inside the file. My rollback went without a hitch but my phone is not rooted and no TWRP installed. Everything is stock so YMMV.
Create a folder "dload" in your micro SD card and copy in the UPDATE.APP from the rollback image. This file is about 67 MB.
Turn-off the phone.
Press Vol+, Vol-, and Power Button simultaneously until it turns on. Keep them all pressed until you see the update screen. You can release the buttons when you see them. The rollback image takes about 30-60 seconds to complete. The phone will reboot when completed.
The phone will restart back into Android. Turn-off the phone and remove the micro SD card.
Delete UPDATE.APP rollback image (67 MB) from folder dload.
Copy the UPDATE.APP file from the L14 image into dload. The file is about 3 GB after decompression.
Re-insert micro SD into phone and restart per step # 3.
The update screen will appear and it'll start to install the L14 image.
I believe it'll auto restart after completion (don't remember). The entire process should take 5-10 minutes.
Congratulations!!! Now you are back to MM.
Click to expand...
Click to collapse
Sorry to bring this thread up again... I just followed this and got to B162 (L04), but my device is L14.
How can I start updating towards B385 for L14?
Anyone have any step by step instructions?
coolest35 said:
Sorry to bring this thread up again... I just followed this and got to B162 (L04), but my device is L14.
How can I start updating towards B385 for L14?
Anyone have any step by step instructions?
Click to expand...
Click to collapse
You need to make sure that the full update image (3GB) is already for the L14 version and not the L04.
In the second post in this thread there is a link to all the current L14 packages. In the list locate the one that has the version B162 and download it. Extract the UPDATE.APP and use that as the MM package for your specific phone.
Just FYI, the rollback image is branded for L04, however at that point it's only preparing the phone to allow to receive a update package that is of lower version than what you currently have (going from N back to MM). So even though you have the 64GB L14 version the roll back image will work regardless.
Once you are back to MM and your device is recognized as L14 once again, it should start taking OTA updates. This will get you back to stock N.

test install l31 b382

Hello
Do you think it's okay?
I'm l31c432b160
I installed l31c440b382 update.zip http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v87647/f2/full/update.zip + datafull c432b370. FULL-OTA-MF-PV
reboot
Twrp 3.1.1.0, install b380 http://update.hicloud.com:8180/TDS/...1/full/VNS-L31_hw_eu/update_VNS-L31_hw_eu.zip OTA-MF
reboot.
Removes twitter because there is a patch in b382 it bug, we reinstall it after with play store.
Install http://update.hicloud.com:8180/TDS/...2/full/VNS-L31_hw_eu/update_VNS-L31_hw_eu.zip OTA-MF
reboot.
Reinstalls twitter, goes to phone settings l31c432b382.
If there is a problem twrp install datafull c432b370, reboot goes to update ota, it offers b380.
So in the end I have c440b382 complete system file + new optimizations
In b382 goes to update system, parametre, there is in addition (update at night).
I don't know exactly, what you want to do and please remove picture with IMEI numbers.
VNS-L31 B383 and B382 are coming very soon because they are in firmware finder. B385 and B384 are the next updates, because they are in firmware finder too.
yea, but every update got 2 versions without file difference.
dkionline said:
yea, but every update got 2 versions without file difference.
Click to expand...
Click to collapse
Yeah, so there is two updates in coming
Hello
It is a shame that the device only takes the update by dload card sd.
Do you think that if we change apk hwouc
Ex: P10, could our device do this?
http://www.htcmania.com/showpost.php?p=26214219&postcount=2
Just for fun
Chisetdel31260 said:
Just for fun
Click to expand...
Click to collapse
How did you done this ?
NewShield_ said:
How did you done this ?
Click to expand...
Click to collapse
What is your version today.?
Chisetdel31260 said:
What is your version today.?
Click to expand...
Click to collapse
B380. Btw, What's new in the B384 ?
NewShield_ said:
B380. Btw, What's new in the B384 ?
Click to expand...
Click to collapse
Ok you b380, I'm in b380 downloaded the otaMF file from b382
http://update.hicloud.com:8180/TDS/...2/full/VNS-L31_hw_eu/update_VNS-L31_hw_eu.zip
With twrp install and reboot then looked at parameters.
Then looked at update there is update overnight.
For return b380 http://update.hicloud.com:8180/TDS/...1/full/VNS-L31_hw_eu/update_VNS-L31_hw_eu.zip
What is a DAT file? There is information system in.?

How to get back to stock from lineages os provided by open kirin

I flashed lineage os beta 4.img which is provided by open kirin recently in my honor 7x. But i didn't like this rom since its beta rom and have significant bugs... So i want to go back to my stock oreo rom. Please help me get back to stock. Thanks in advance.
krishnapenn said:
I flashed lineage os beta 4.img which is provided by open kirin recently in my honor 7x. But i didn't like this rom since its beta rom and have significant bugs... So i want to go back to my stock oreo rom. Please help me get back to stock. Thanks in advance.
Click to expand...
Click to collapse
Just need to flash you stock system.img
mrmazak said:
Just need to flash you stock system.img
Click to expand...
Click to collapse
Sir. You mean, the same way as i flashed lineage os via adb??
krishnapenn said:
Sir. You mean, the same way as i flashed lineage os via adb??
Click to expand...
Click to collapse
I flashed lineage os by copying the .img file into the fastboot folder and then 'fastboot flash system <.img file>
Do you want me to repeat the same process with stock system .img
krishnapenn said:
Sir. You mean, the same way as i flashed lineage os via adb??
Click to expand...
Click to collapse
Yes. Thanks factory reset again.
That it. Unless you did other mods,like magisk
mrmazak said:
Yes. Thanks factory reset again.
That it. Unless you did other mods,like magisk
Click to expand...
Click to collapse
Sir can you suggest me where i can find stock system img for honor 7x
krishnapenn said:
Sir can you suggest me where i can find stock system img for honor 7x
Click to expand...
Click to collapse
You updated to Oreo, correct. Of course you did.
The update.zip has inside (extract it) update.app. use heawei update extractor to extract that file. You will get the system.img there. That one will be the correct one for your model and build number.
If yo I updated from regular ota, you may not have this zip file
If this the case you. Will need to download it. From pro-teammt.ru
Link if you need it.
mrmazak said:
You updated to Oreo, correct. Of course you did.
The update.zip has inside (extract it) update.app. use heawei update extractor to extract that file. You will get the system.img there. That one will be the correct one for your model and build number.
If yo I updated from regular ota, you may not have this zip file
If this the case you. Will need to download it. From pro-teammt.ru
Link if you need it.
Click to expand...
Click to collapse
Sir.i checked in teammt website. In there i found only ota file for my phone model number. What to do now sir???
krishnapenn said:
Sir.i checked in teammt website. In there i found only ota file for my phone model number. What to do now sir???
Click to expand...
Click to collapse
What is your model and region number.
Example
Bnd-AL10c675
Or
BND-L21c185
mrmazak said:
What is your model and region number.
Example
Bnd-AL10c675
Or
BND-L21c185
Click to expand...
Click to collapse
BND-AL10 8.0.0.320(C675)
Sir this is the build number of my phone
krishnapenn said:
BND-AL10 8.0.0.320(C675)
Sir this is the build number of my phone
Click to expand...
Click to collapse
it is there. her are the three update file links.
you "should " only need the one main "update.zip" file to extract system.img
but can use all three to make full restore
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2649/g1699/v133035/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...l/BND-L22_hw_in/update_full_BND-L22_hw_in.zip
http://update.hicloud.com:8180/TDS/...35/f1/full/public/update_data_full_public.zip
mrmazak said:
it is there. her are the three update file links.
you "should " only need the one main "update.zip" file to extract system.img
but can use all three to make full restore
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2649/g1699/v133035/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...l/BND-L22_hw_in/update_full_BND-L22_hw_in.zip
http://update.hicloud.com:8180/TDS/...35/f1/full/public/update_data_full_public.zip
Click to expand...
Click to collapse
Thank you so much for your patience and work sir!!! I'll work on one of the .img
mrmazak said:
it is there. her are the three update file links.
you "should " only need the one main "update.zip" file to extract system.img
but can use all three to make full restore
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2649/g1699/v133035/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...l/BND-L22_hw_in/update_full_BND-L22_hw_in.zip
http://update.hicloud.com:8180/TDS/...35/f1/full/public/update_data_full_public.zip
Click to expand...
Click to collapse
sir,thank you so much. i have successfully rolled back to honor 7x stock oreo rom . sir one more question?? can i flash nougat stock rom as of now im in oreo.??
krishnapenn said:
sir,thank you so much. i have successfully rolled back to honor 7x . sir one more question?? can i flash nougat stock rom as of now im in oreo.??
Click to expand...
Click to collapse
Downgrading to Nougat is not recommended, because EMUI 8 is Treble supported.
That means it has dozens of new partitions and partition lengths. Many people have screwed their phone trying to downgrade.
Unless you have foolproof method of downgrading and correct 'downgrade firmware' (yes, it's different, cause it will re-write all the partitions again), Don't do it.
antariksh said:
Downgrading to Nougat is not recommended, because EMUI 8 is Treble supported.
That means it has dozens of new partitions and partition lengths. Many people have screwed their phone trying to downgrade.
Unless you have foolproof method of downgrading and correct 'downgrade firmware' (yes, it's different, cause it will re-write all the partitions again), Don't do it.
Click to expand...
Click to collapse
OK sir for sure I will not downgrade. Sir one more question. How to relock bootloader sir?
krishnapenn said:
OK sir for sure I will not downgrade. Sir one more question. How to relock bootloader sir?
Click to expand...
Click to collapse
try this in fastboot mode:
Code:
fastboot oem relock [your bootloader unlock code]
I have a similar problem and I cannot get back to stock from the RR oero
I used the method to upgrade from 5.1 to oero 8.0 here https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649/
Then used the Openkirin RR install method using stock recovery. - all goin good but RR has to many crashes.
I have tried to roll back to Stock using the same HWOTA method putting the update files int HWOTA 8 folder, all looks good in twrp and I wipe Cache and Dalvik but it still reboots into RR
I've noticed in Twrp in red letters it says cannot find partition /system
Rebooting into recovery after using to install TWRP it first boots into stock recovery then when i press factory reset it will boot into TWRP.
Need help with extracting system.img
mrmazak said:
You updated to Oreo, correct. Of course you did.
The update.zip has inside (extract it) update.app. use heawei update extractor to extract that file. You will get the system.img there. That one will be the correct one for your model and build number.
If yo I updated from regular ota, you may not have this zip file
If this the case you. Will need to download it. From pro-teammt.ru
Link if you need it.
Click to expand...
Click to collapse
I have installed Lineage OS Treble GSI via fastboot and may want to return to STOCK EMUI 8.0 in the future but I have a chromebook and can't use the Huawei Update Extractor Tool(Windows app).
Would you be willing to download the "update.zip", extract and post the "system.img" extracted from the "update.app"?
I need the "system.img" for Huawei Mate SE BND-L34C STOCK OREO 8.0
I searched XDA and GOOGLE for the STOCK Mate SE system.img but unable to find.
ANY HELP WILL BE APPRECIATED, THANKS IN ADVANCE.
thescottpatton said:
I have installed Lineage OS Treble GSI via fastboot and may want to return to STOCK EMUI 8.0 in the future but I have a chromebook and can't use the Huawei Update Extractor Tool(Windows app).
Would you be willing to download the "update.zip", extract and post the "system.img" extracted from the "update.app"?
I need the "system.img" for Huawei Mate SE BND-L34C STOCK OREO 8.0
I searched XDA and GOOGLE for the STOCK Mate SE system.img but unable to find.
ANY HELP WILL BE APPRECIATED, THANKS IN ADVANCE.
Click to expand...
Click to collapse
I remember someone posting mate files before I will look.
I uploaded mate se oreo B330 to file host
https://www.androidfilehost.com/?w=files&flid=278212

updating failed

So, I just rooted my Huawei P Smart, the 136 update shows up, it does all the install steps, reboots and then says it failed. Do O need to do something on the twrp boot?
Download the full firmware, we lose the option to just update via normal update and we can update with a full system update
airb05 said:
Download the full firmware, we lose the option to just update via normal update and we can update with a full system update
Click to expand...
Click to collapse
Just did that, 2 GB download, tries to install, reboots, goes to twrp, then I reboot to normal system and still says update failed.
Pretty sure you'll need stock recovery to update the "normal" way.
callmeWhiskers said:
Pretty sure you'll need stock recovery to update the "normal" way.
Click to expand...
Click to collapse
So I'll need to unroot and root again ? Anyway to update without doing that? Cause Im pretty sure ill screw up if I try it, barely made the root LOL
siivet said:
So I'll need to unroot and root again ? Anyway to update without doing that? Cause Im pretty sure ill screw up if I try it, barely made the root LOL
Click to expand...
Click to collapse
I'm not an expert - I always use HuRUpdater to update. It just requires you to download the (exact) right files, renaming them correctly and (like rooting with Magisk) just simply flashing a single .zip in recovery. In case you try it out, remember rule#1: Always make sure you have a (nandroid)backup.
Here are the relevant lines from my "Huawei-related-findings" text file:
#update
"Depends on how you rooted.
For a successful OTA install your device probably must meet the following criteria
• HUAWEI stock recovery installed
• unaltered /system, /product and /vendor partitions
So if you rooted with a "systemless" method (e.g. Magisk, recent SuperSU) and haven't done other installs/modifications that typically change /system you could try it. And you have to flash stock recovery (i.e. get rid of TWRP temporarily for the OTA install)."
Click to expand...
Click to collapse
#source XDA
 @st_voss (u=1065667)
https://forum.xda-developers.com/showpost.php?p=73011427&postcount=2
#update
“It's recommended to use a proper custom recovery (with running oeminfo_nvm_server service) like for example*my version of TWRP.
How to use:
Warning: Make sure you know what you are doing and do not flash firmware from other devices.
1. Download firmware files (for official firmware use Huawei Firmware Finder).
2. Put files you want to flash in a seperate folder on sdcard.
Supported zip files to flash are (name must match):
◦ update.zip (use FullOTA file)
◦ update_all_hw.zip
◦ update_data_public.zip
3. Optional: Put recovery.img in same folder if you want to keep custom recovery.
4. Put HuRUpdater zip in same folder.
 5. Select*only HuRUpdater*to flash in custom recovery.
6. Follow instructions on screen. Flashing can take multiple minutes.
Problems:
• If firmware includes factory reset
◦ Factory reset is not supported by custom recovery. Therefore HuRUpdater will flash stock recovery before launching factory reset. After flashing firmware and doing factory reset, you need to flash recovery manually.”
Click to expand...
Click to collapse
#source XDA
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
#notes HuRUpdater_0.4.zip working
Thanks mate, the Huawei Firmware Finder seems like its not working for the moment, but as soon as it is ill follow your tip
siivet said:
Thanks mate, the Huawei Firmware Finder seems like its not working for the moment, but as soon as it is ill follow your tip
Click to expand...
Click to collapse
Yes, I'm im the same boat - I guess you also get the "can't have connection" error using the FF app. During the last weeks they had troubles with their service regarding hackers and moving to a new server (according to their telegram group), which have been fixed ("all services working normally now"), and many can use it again - for whatever reason some still can't connect. I tried reinstalling the app, using proxies from different countries - still doesn't let me connect.
But their web interface is working: https://pro-teammt.ru/firmware-database/ though you can't check iirc, if the firmware has been approved for your IMEI.
According to this post:
sun75 said:
It's online now! I suggest you to download the "2018.08.30" .158 "2379" release, if you have a FIG-LX1, L31 board phone.
Click to expand...
Click to collapse
You apparently can download this release (2379) if you own this device/board- though the last time I updated mine (.148) I used the 2079 (154226) one despite owning the exact same device. I'm slightly confused about this
I didn't try the above mentioned update myself.
siivet said:
Thanks mate, the Huawei Firmware Finder seems like its not working for the moment, but as soon as it is ill follow your tip
Click to expand...
Click to collapse
Try installing an older version of the Firmware Finder app - I switched from (current) v9.0 to v8.9 and it works now
https://apkpure.com/firmware-finder...efinder/download/86-APK?from=versions/version
..

Categories

Resources