Guys, Android Nougat 7.1 is now available for all Snapdragon variant Galaxy Note 4s (which of-course include N910P Sprint variant) and as a result, I'm sharing here the link of the thread from where you can get an insight about the latest development of the ROM & other things.
The link is :
http://forum.xda-developers.com/note-4-verizon/development/cyanogenmod-14-1-t3495231
Kindly thank & support @hsbadr for all his hard work & time devotion for the ROM.
(I'm in no way to be associated with this ROM as this is solely the work of @hsbadr. All the credit goes to him for it).
The ROM works quite well on unlocked variant of N910P model with a GSM SIM Card.
Users on a Sprint network need to check about the feasibility of the ROM.
If anyone is interested in trying out the ROM, then kindly thanks @hsbadr & have a look at the below mentioned steps that I took to make it work on my N910P model using a GSM SIM Card.
1. This ROM even works on newest PJ1 bootloader & baseband. So, you can try it out without worries if you have taken the latest OTA update.
2. Perform a full nandroid backup of the current ROM.
3. Wipe all the partitions 3 times (except Micro SD Card) using latest TWRP recovery.
4. Download the ROM, GApps & Boot.img from the above thread mentioned & flash it in the following order:
a. ROM
b. GApps
c. Boot.img
5. Wait for the ROM to boot (it may take upto 15-20 minutes to boot, so be patient).
6. Complete the setup.
7. Enjoy Nougat on your device. :good:
Bug(s) that I've encountered:
1. YouTube videos have no sound on Bluetooth headset/plugs.
Kindly keep all the discussions related to N910P variant on this thread only so as to keep that thread clean.
The ROM is primarily meant for Verizon variant but works well with other variants too.
Will def have to check this out, Thanks!
What about unlocked SM-N910P with international CDMA SIM?
anees02 said:
What about unlocked SM-N910P with international CDMA SIM?
Click to expand...
Click to collapse
It might work. Go & check yourself.
I'm using this ROM. The boot.img is not necessary to flash. Just flash the ROM and gapps like any other CM variant. I use sprint and had to fiddle with the *#*#4636#*#* menu for data/SMS to work and have to toggle airplane after a reboot but for an early build it's great. Battery has been wonderful. Other than the mentioned streaming issue (issue isn't present when streaming over Bluetooth) I've only run into GPS being fickle.
wgrant said:
I'm using this ROM. The boot.img is not necessary to flash. Just flash the ROM and gapps like any other CM variant. I use sprint and had to fiddle with the *#*#4636#*#* menu for data/SMS to work and have to toggle airplane after a reboot but for an early build it's great. Battery has been wonderful. Other than the mentioned streaming issue (issue isn't present when streaming over Bluetooth) I've only run into GPS being fickle.
Click to expand...
Click to collapse
For me, the audio did not work with or without a Bluetooth headset.
Now, I'm not able to place any call (without any Bluetooth device) even when there is good network.
Also, Couldn't hear any voice even on Chrome, but yes, for an early build, the work is definitely amazing by the developer.
robinhood1808 said:
It might work. Go & check yourself.
Click to expand...
Click to collapse
I will miss s-pen features.[emoji20]
Thanks for this. Great find.
anees02 said:
I will miss s-pen features.[emoji20]
Click to expand...
Click to collapse
S-Pen will work if you install CM SPen Add-On & Note Buddy apps.
robinhood1808 said:
S-Pen will work if you install CM SPen Add-On & Note Buddy apps.
Click to expand...
Click to collapse
Really?
Great news.
So where to find spen addons...are they built into CM or downlod it separately?
Because I haven't tried CM for a long time.
Thank you.
anees02 said:
Really?
Great news.
So where to find spen addons...are they built into CM or downlod it separately?
Because I haven't tried CM for a long time.
Thank you.
Click to expand...
Click to collapse
You'll find these apps in Play Store.
However, you'll have to dig internet a bit to make them work accordingly.
@robinhood1808 Which version should i download? Latest or the 'trlte' one?
Also Thanks for the find!
aaron74 said:
@robinhood1808 Which version should i download? Latest or the 'trlte' one?
Also Thanks for the find!
Click to expand...
Click to collapse
I downloaded the Verizon variant & not the T-Mobile variant (Though I'm using a GSM SIM). So, you can try Verizon or the T-Mobile as the ROM is basically all-variant one.
aaron74 said:
@robinhood1808 Which version should i download? Latest or the 'trlte' one?
Also Thanks for the find!
Click to expand...
Click to collapse
The build is unified, naming is just set to Verizon on everything. Device will show as N910V instead of P but that's fixable in build.prop. I haven't updated to the latest build, still using the trlte myself as daily driver.
wgrant said:
The build is unified, naming is just set to Verizon on everything. Device will show as N910V instead of P but that's fixable in build.prop. I haven't updated to the latest build, still using the trlte myself as daily driver.
Click to expand...
Click to collapse
Thanks, I finally seen that info in change log. But from what I've read in last few post, it looks like latest build has some extra bugs. So i think I'll try the trlte build for now.
That's what i took from it anyhow.
Does it matter which gapps i use? (Eg. Aroma,full,micro?)
I'm heading to work, so when i get more time I'll try, and maybe try root and exposed.
aaron74 said:
Thanks, I finally seen that info in change log. But from what I've read in last few post, it looks like latest build has some extra bugs. So i think I'll try the trlte build for now.
That's what i took from it anyhow.
Does it matter which gapps i use? (Eg. Aroma,full,micro?)
I'm heading to work, so when i get more time I'll try, and maybe try root and exposed.
Click to expand...
Click to collapse
Don't believe xposed works on 7.1 yet, root hasn't been an issue at all for me. I did flash supersu 2.78 though instead of using the cm root. For gapps I used the micro since it was small to avoid conflicts but still had exchange included.
Not sure if it effects just the N910P model or not, but trying to access any .webm files crashes the entire phone. I can't even open the gallery up or it crashes.
Eusrnaem said:
Not sure if it effects just the N910P model or not, but trying to access any .webm files crashes the entire phone. I can't even open the gallery up or it crashes.
Click to expand...
Click to collapse
What is a webm file? I'll test on mine if I can get one.
I just got around to installing. Anyone else having problems using root with default file manager? I can't open any thing but internal. But fx file works with root.
So it must be file manager
I downloaded the CM 14.1 and it works fine but I couldn't download gapps from github because for me this site downloads don't work.
So I didn't test a lot of things just make some calls (CDMA Carrier) and take some tour in system settings then I returned to Touchwiz rom again.
Related
First, what you do to your phone is your responsibility, etc., etc.
I am not a developer. The work is mostly not mine. A group of folks have been playing with this for a couple weeks over in the General section, and thanks to a great deal of help from others, it is ready to put out there. Hopefully, a developer can polish it and work out the few kinks there are. I will continue to explore and experiment. but this feels like a daily driver at this stage!
1. Gather the files needed as listed in the instructions.
2. I was on the BPA1 modem.
3. I wiped the phone completely. Everything but the micro sd.
4. Install Nameless Rom available at Er. Aditya's thread: http://forum.xda-developers.com/note-4/snapdragon-dev/rom-nameless-mm-lightfastdeodexed-t3363547
5. Install Louforgiveno's Verizon data fix (attached).
6. Install AEL kernel available here: https://www.androidfilehost.com/?fid=24499762636001208
7. Reboot. It will take 15 minutes or so to finish the boot and may reboot during the process. Be patient. Once the phone boots completely, and you go through setup, it will take a few minutes to establish connection to the network, but it has been solid for me once it does. This occurs each time you boot.
8. Reboot into recovery and flash Chainfire's SU available here (the kernek will wipe it): https://download.chainfire.eu/696/supersu/
Alternative kernel posted by Kcnycity: H-Vitamin kernel found here http://sharewidget.org/forum_xda-developers/note-4/snapdragon-dev/kernel-h-vitamin-t3364213. I found that I lost brightness control with this kernel on my dev edition, but not my retail. Which raises another point raised by douger1957. I think we had assumed that the dev phones and retail are the same, but the experience has varied across a number of users, so it is a trial and error process for each phone to find the best combination for your device.
ALTERNATIVE ROM: Try Dr. Ketan S7 rom here (for 910G) : http://www.drketanrom.com/n910g.html
Use the H-Vitamn kernel. Looks flawless so far. Network access is faster. And theme engine!
I had forgotten how much fun this can be!
Thanks go to:
Louforgiveno, without whom this would not be happening
Er. Adiytya and his team, who allowed me to use his port
KeTuRr74, who pointed us in the right direction for the data fix
FYI, at least two other roms from the Snapdragon forum will work with this process.
Known issues with this version:
1. Verizon Message Plus works but does not complete the subscription process. (Update: After about 14 hours, Message + has synced).
2. Slow to connect to network
Did you have to install the bootloader/ modem like it's stated in the OP on the ROM page or just the ROM itself followed by the data fix, kernel, and submit update?
Sent from my SM-N910V using XDA-Developers mobile app
InfantryMarc said:
Did you have to install the bootloader/ modem like it's stated in the OP on the ROM page or just the ROM itself followed by the data fix, kernel, and submit update?
Sent from my SM-N910V using XDA-Developers mobile app
Click to expand...
Click to collapse
No.
---------- Post added at 08:50 PM ---------- Previous post was at 08:39 PM ----------
It should be noted that there seems to be differences in how the ROMs from the Snapdragon forum behave, depending on whether your phone is a Developer Edition or a converted Retail Edition. It's suspected that there are different bootloaders at play.
Also, try to make sure that you give thanks to louforgiveno and keturr74. Both have been a big help in bridging the gap between Verizon phones and the other Snapdragon variants.
Did you try installing mm s7 port ?
axeldiks1 said:
Did you try installing mm s7 port ?
Click to expand...
Click to collapse
No,at least not yet
InfantryMarc said:
Did you have to install the bootloader/ modem like it's stated in the OP on the ROM page or just the ROM itself followed by the data fix, kernel, and submit update?
Sent from my SM-N910V using XDA-Developers mobile app
Click to expand...
Click to collapse
The BPA1 modem has been very successful on this port. I have clocked over 78 mps in a strong location. I have both the Dev edition and an unlocked retail and it has worked on both
axeldiks1 said:
Did you try installing mm s7 port ?
Click to expand...
Click to collapse
Dr Ketan's? I'm going to install that this weekend.
I messed with this a bit last weekend with Keturr's ROM. louforgiveno's data fix came in too late in the weekend and I had to recover to Jasmine. Everything I got to try with Keturr's ROM worked, other than data.
For what it's worth... for those who feel married to TouchWiz because of S Note, it's now available in the Play Store.
I couldn't get data or signal to stay at all. And when I went to add my Google account, it would completely shut the phone off. Had to restore back to a previous twrp restore to fix anything. And that was on a clean install.
Sent from my SM-N910V using XDA-Developers mobile app
I tried the method in the OP but with the kernel the phone rebooted itself 3 times navigating the playstore and the nameless control panel so i wiped it and flashed H-Vitamin kernel and its been working flawlessly.
I got it working but does this not having theming? Are there any with theming and screen mirroring support?
I thought MM was coming to 910V but it wasn't what I expected XD
Title is kinda misleading
Kcnycity said:
I tried the method in the OP but with the kernel the phone rebooted itself 3 times navigating the playstore and the nameless control panel so i wiped it and flashed H-Vitamin kernel and its been working flawlessly.
Click to expand...
Click to collapse
What version are you using?
Sent from my SM-N910V using XDA-Developers mobile app
thetrangdam said:
I thought MM was coming to 910V but it wasn't what I expected XD
Title is kinda misleading
Click to expand...
Click to collapse
Marshmallow is coming to the N910V. But when? If you want Marshmallow now and not on Verizon's schedule, this is how you do it. I didn't see anything misleading. This is posted in the Development thread and not in General, where you'd expect to see an announcement about official Marshmallow.
The OP and others did quite a bit of work to bring TouchWiz Marshmallow options to our phones. To them, I extend my thanks.
Kcnycity said:
I tried the method in the OP but with the kernel the phone rebooted itself 3 times navigating the playstore and the nameless control panel so i wiped it and flashed H-Vitamin kernel and its been working flawlessly.
Click to expand...
Click to collapse
Interesting I was getting a ton of reboots launching apps too I might have to try this.
Does anyone know what other MM roms work? I was looking for one with the theme engine.
So can we flash the kernel on any aosp based rom like cm13? I'm almost positive we can but want to make sure I didn't miss anything.
Sent from my SM-N910V using Tapatalk
Mibuix0r said:
Interesting I was getting a ton of reboots launching apps too I might have to try this.
Does anyone know what other MM roms work? I was looking for one with the theme engine.
Click to expand...
Click to collapse
howellcp said:
What version are you using?
Sent from my SM-N910V using XDA-Developers mobile app
Click to expand...
Click to collapse
I was using Nameless V3, all in all a pretty fast light rom but decided to flash Dr Ketan's MM s7 edge port and I enjoy it much more with the tweaks and mods available within it also has the theme engine
Kcnycity said:
I was using Nameless V3, all in all a pretty fast light rom but decided to flash Dr Ketan's MM s7 edge port and I enjoy it much more with the tweaks and mods available within it also has the theme engine
Click to expand...
Click to collapse
That was actually the one I was going to try next. What kernel did you end up using?
Mibuix0r said:
That was actually the one I was going to try next. What kernel did you end up using?
Click to expand...
Click to collapse
H-Vitamin kernel found here http://forum.xda-developers.com/note-4/development/kernel-h-vitamin-t3355879
---------- Post added at 03:13 PM ---------- Previous post was at 03:00 PM ----------
Also as a side note after you flash the H-Vitamin kernel it will overwrite root access simply reboot into recovery after you go through the first boot up setup and flash UPDATE-SuperSU-v2.46 and you will have root back.
Kcnycity said:
I was using Nameless V3, all in all a pretty fast light rom but decided to flash Dr Ketan's MM s7 edge port and I enjoy it much more with the tweaks and mods available within it also has the theme engine
Click to expand...
Click to collapse
Thanks! I will be trying that one tonight.
Took me forever to find the google settings in the new one. Gotta go to Settings>Application settings>Google
I want to use Nougat on my HTC 10. I have the verizon version of the phone, but don't mind converting to any other version if necessary (or just easier) to move to Nougat.
I've been reading for days, but can't find any solid, complete information on how to do this, or really if even possible. I've found lots of pieces of the puzzle, but nothing that lists the steps, or requirements for making this work.
If you know how to get a Verizon phone working on Nougat firmware and have a working phone and data, I'd love to know EXACTLY how you managed to do so. If I can't have advanced calling right now, that's okay with me, but I do need a working phone and data at a minimum.
I've installed PMEUHL_2.28.401.9 firmware and LeeDroid_ROM_Nougat_HTC10_R21, but had to change the phone to SuperCID 1111111 to get it to install. I also had to change the firmware packages' android.txt file to have the MID match the phone (MID2PS650000).
I have everything running, but have no phone or data, so I'm stuck with wifi only at this point.
I don't mind if I have to wipe the phone again to get it working (I'd rather not), so long as I can use the phone on Verizon again.
Is it possible I just need to flash the verizon radio at this point, or do I just need to start from scratch?
Thanks in advance for any help you can provide.
JustinChase said:
I want to use Nougat on my HTC 10. I have the verizon version of the phone, but don't mind converting to any other version if necessary (or just easier) to move to Nougat.
I've been reading for days, but can't find any solid, complete information on how to do this, or really if even possible. I've found lots of pieces of the puzzle, but nothing that lists the steps, or requirements for making this work.
If you know how to get a Verizon phone working on Nougat firmware and have a working phone and data, I'd love to know EXACTLY how you managed to do so. If I can't have advanced calling right now, that's okay with me, but I do need a working phone and data at a minimum.
I've installed PMEUHL_2.28.401.9 firmware and LeeDroid_ROM_Nougat_HTC10_R21, but had to change the phone to SuperCID 1111111 to get it to install. I also had to change the firmware packages' android.txt file to have the MID match the phone (MID2PS650000).
I have everything running, but have no phone or data, so I'm stuck with wifi only at this point.
I don't mind if I have to wipe the phone again to get it working (I'd rather not), so long as I can use the phone on Verizon again.
Is it possible I just need to flash the verizon radio at this point, or do I just need to start from scratch?
Thanks in advance for any help you can provide.
Click to expand...
Click to collapse
Have you tried formatting data?
In TWRP > wipe > format data > (type) yes
(do at own risk, it won't hurt anything, just will wipe your internal. you ARE warned)
------------------
Side note, Advanced Calling only works on one ROM, and that is @santod040 amazing port found here
I run SuperCID all the time, It's suggested to do 22222222 instead of 11111111 but not a biggie at all.
I run Verizon firmware with multirom. I have my stock ROM as primary (this is a must) and then I can flash any N ROM as a secondary.
I have ICE N ROM, Leedroid N ROM, Santods ROM, AOKP MM and CM 14.1 all loaded up and working great with data.
----------------
As for what you want,
http://forum.xda-developers.com/showpost.php?p=70104011&postcount=3
You could wait a little bit longer for it to be released. It's not far away.
For NuSense ROM do we still need to install with data unencrypted? I assume so because I don't think TWRP is updated for Android N. Thanks.
I'm on the new viper 4.3.1 which is N based without upgrading firmware. everything working pretty well and has great tweaks and theming. Give it a shot.
wifi calling and video calling seem to be bugged but the advanced calling is active for hd voice
id do it this way until Verizon updates, itll be soon.
Might just stay on MM, Idk I'm torn. If NuSense has VZW features working bug free I'll give that a shot
pettigrew95 said:
Might just stay on MM, Idk I'm torn. If NuSense has VZW features working bug free I'll give that a shot
Click to expand...
Click to collapse
Vzw features are working fine for me.
Sent from my HTC6545LVW using Tapatalk
pettigrew95 said:
For NuSense ROM do we still need to install with data unencrypted? I assume so because I don't think TWRP is updated for Android N. Thanks.
Click to expand...
Click to collapse
On the Downloads tab of the HTC 10 TWRP thread, there is an unofficial version of TWRP v3.0.2.7 which supports Nougat firmware. If you're still on Marshmallow firmware and use a Nougat ROM on it, you still might want to use the official TWRP v3.0.2.6.
disconnecktie said:
Vzw features are working fine for me.
Sent from my HTC6545LVW using Tapatalk
Click to expand...
Click to collapse
You can be on the phone, and at the same time, use data?
Ex: GPS while using the phone or browsing play store while on a call
Sent from my HTC 10 using Tapatalk
Seems to work fine for me.
Sent from my HTC6545LVW using Tapatalk
disconnecktie said:
Seems to work fine for me.
Sent from my HTC6545LVW using Tapatalk
Click to expand...
Click to collapse
You can be on the phone, and at the same time, use data?
Ex: GPS while using the phone or browsing play store while on a call
Just because the LTE icon is there doesn't mean it's working. Try making a call and browsing the play store.
Sent from my HTC 10 using Tapatalk
When I was running N I couldn't browse the web and be on a phone call simultaneously. Also, HD calling and video calling did work for me. This was on LeeDroid N and I also tried Viper 2.4.0 with the same results.
Viper Nougat 4.x.x works perfectly fine on VZW Marshmallow firmware, except no advanced calling (wifi calling and VoIP).
Make sure to choose 6.0.1 firmware in the last option of Aroma to have fingerprint scanner working, as well as mobile data. (if you are on MM firmware!!) ROM does NOT install firmware.
WillyRy said:
Viper Nougat 4.x.x works perfectly fine on VZW Marshmallow firmware, except no advanced calling (wifi calling and VoIP).
Make sure to choose 6.0.1 firmware in the last option of Aroma to have fingerprint scanner working, as well as mobile data. (if you are on MM firmware!!) ROM does NOT install firmware.
Click to expand...
Click to collapse
Advanced calling is bugged on HTC's end, and will be until either an incremental official update or until a fix is found. TL: DR it will be bugged in all roms based of HTC N.
quickdraw86 said:
Advanced calling is bugged on HTC's end, and will be until either an incremental official update or until a fix is found. TL: DR it will be bugged in all roms based of HTC N.
Click to expand...
Click to collapse
But advanced calling works fine on test N ROMs on the Verizon 10, so you'll just have to wait for the OTA to drop.
hgoldner said:
But advanced calling works fine on test N ROMs on the Verizon 10, so you'll just have to wait for the OTA to drop.
Click to expand...
Click to collapse
With Verizon N firmware, which is truly what's missing here, the updated radio...from that elusive OTA.
Sent from my HTC6545LVW using Tapatalk
santod040 said:
With Verizon N firmware, which is truly what's missing here, the updated radio...from that elusive OTA.
Sent from my HTC6545LVW using Tapatalk
Click to expand...
Click to collapse
I dont know about you guys but I've got a notification from Verizon saying 2.28 is ready to download. Hopefully its not much longer until everything is working perfectly.
jhorn85 said:
I dont know about you guys but I've got a notification from Verizon saying 2.28 is ready to download. Hopefully its not much longer until everything is working perfectly.
Click to expand...
Click to collapse
I think you're probably running a custom Rom and seeing the notification for US Unlocked Nougat.
It's not a notification from Verizon at all.
There is no Verizon 2.28 Nougat update... It will not be 2.28.605.x when it's released.
Sent from my HTC6545LVW using Tapatalk
santod040 said:
There is no Verizon 2.28 Nougat update... It will not be 2.28.605.x when it's released.
Click to expand...
Click to collapse
I don't expect 2.28.605.x to be the number of the ROM version when it drops.
hgoldner said:
I don't expect 2.28.605.x to be the number of the ROM version when it drops.
Click to expand...
Click to collapse
Correct, that's what I was saying as well.
As the current Nougat Vzw test builds are not 2.28 and aren't typically of the same number as other variants anyways...
Sent from my HTC6545LVW using Tapatalk
Hey guys, I'm stock, rooted, s-off with magisk and I'd like to be on Lee Droid or Viper Nougat with working Magisk and Verizon features. The way I'm reading their guides, it seems I would have to be on Nougat firmware for that. Does that mean I can convert to US Unlocked Nougat with updated firmware, then to Lee Droid or Viper Magisk and pass safety net while having nougat and advanced calling and such?
Thanks guys
I'd love to know the answer to this as well. I don't have many friends using Verizon, so I don't use the Verizon features much. I'm just kind of tired of Verizon being slow with their updates. For some reason I keep being stupid and buying Verizon phones despite the long updates for 4 different phones that have been on Verizon. :/
you guys have to flash the US unlocked RUU and then flash the Verizon radio for it to work. From what I've read you'll have the features you want. But since I haven't personally tried I cannot be 100%. there is guides on how to do this.
IMHO, I would wait for Verizon, it is always best to use your carriers firmware. It wont be much longer even though itll feel like a lifetime.
I'd love to get a confirmation on this as well. I can say however from my own experience that running VZW firmware with viper10 4.x.x ROM that everything works great EXCEPT volte (HD calling/ advanced calling features) I'd like to mention to others who are experimenting as well that I can format data, flash 3.5.0 and have volte back up and running no problem. My theory is the issue lies in the VZW firmware being a MM version. My next step is to flash the nougat RUU, flash the VZW radio, and then the viper nougat ROM. I'll share the results once I get the chance to do everything. Again if anyone can chime in on this method that would be greatly appreciated.
ROMs now support Advanced Calling with Magisk.
now just need vzw nougat.
andybones said:
ROMs now support Advanced Calling with Magisk.
now just need vzw nougat.
Click to expand...
Click to collapse
Really? What changed?
Im on viper with 1.85 firmware and advanced calling works for me
jhorn85 said:
Im on viper with 1.85 firmware and advanced calling works for me
Click to expand...
Click to collapse
Did you do anything special when you installed the ROM? Could you tell me what steps you took installing it? Just wondering if I'm missing something. I have the latest VZW firmware installed as well. Are you positive that advanced calling is working? I notice that when you make a call the data signal icon will remain on the status bar (unless you go into venom tweaks and change it to anything other than the stock icon, then it will disappear) but there won't be any traffic and I can confirm it by trying to load a web page.
aer0zer0 said:
Really? What changed?
Click to expand...
Click to collapse
Some team work from lee, captn, nkk, baad, and testers.
on multirom with advanced calling and wifi calling, leedroid N.
https://forum.xda-developers.com/showpost.php?p=70525234&postcount=5074
andybones said:
Some team work from lee, captn, nkk, baad, and testers.
on multirom with advanced calling and wifi calling, leedroid N.
https://forum.xda-developers.com/showpost.php?p=70525234&postcount=5074
Click to expand...
Click to collapse
So this is the last intermediate step to getting the extra verizon functions to work? Im assuming once androidkitchen is fixed to set the values properly, we should be able to build it in directly?
aer0zer0 said:
So this is the last intermediate step to getting the extra verizon functions to work? Im assuming once androidkitchen is fixed to set the values properly, we should be able to build it in directly?
Click to expand...
Click to collapse
That's what it's looking like to me. With some work it is possible to get ROMs working on MM firmware with VoLTE and Wi-Fi calling. Santods rom has had this for a little bit and now with this new information, if one was to say combine both, the outcome is great. But I'll leave that to those more experienced than myself, but it is possible now thanks to all these brilliant minds.
Is the magisk files in the magisk repo?
aer0zer0 said:
Is the magisk files in the magisk repo?
Click to expand...
Click to collapse
That I am not sure of, sorry.
aer0zer0 said:
So this is the last intermediate step to getting the extra verizon functions to work? Im assuming once androidkitchen is fixed to set the values properly, we should be able to build it in directly?
Click to expand...
Click to collapse
Need verizon to update to n, that's the step we need. On mm it's still broken on n based Roms
Other Than that yes
afuller42 said:
Need verizon to update to n, that's the step we need. On mm it's still broken on n based Roms
Other Than that yes
Click to expand...
Click to collapse
on a personal build combined from Santods mostly I am able to be on Leedroid N on latest Verizon MM firmware with multirom with VoLTE and Wi-Fi calling.
andybones said:
on a personal build combined from Santods mostly I am able to be on Leedroid N on latest Verizon MM firmware with multirom with VoLTE and Wi-Fi calling.
Click to expand...
Click to collapse
Works now on latest Viper 4.6.0 also
sdamark said:
Works now on latest Viper 4.6.0 also
Click to expand...
Click to collapse
Still not working for me, ill try a clean install at some point. Volte never broke for me on any update, been lucky on that i guess
@andybones also
sdamark said:
Works now on latest Viper 4.6.0 also
Click to expand...
Click to collapse
Even better. Didn't realize that 4.6.0 was out, so I don't know of the change log.
Wasn't bragging by any means also.. Was just stating that it works, and was sure smarter devs would get it soon.
I can confirm that the viper 4.6.0 upgrade does fix volte for vzw devices running mm firmware. The changelog says only working for non magisk version, I suppose that's due to no nougat firmware/RUU released from Verizon yet. If that's a deal breaker your gonna have to wait, otherwise make sure your running the supersu only version. I upgraded from 4.5.0 and it works perfectly. Something I've noticed over the last few months with all the flashing I have done is that if you go into the hidden network info screen, if it shows 3107 for your carrier, it won't work, if it says Verizon wireless as your carrier, then everything is working as it should. Thanks for the update in the rom guys this is GREATLY appreciated for the hard work.
Hello!
I saw that the xda topic lack of fresh builds of LineageOS 14.1 for S4 Mini 3G/LTE.
In this address there are new builds every day! https://visi0nary.de/builds/full/
I'm using lineage-14.1-20170408-UNOFFICIAL-serranoltexx.zip with open_gapps-arm-7.1-pico-20170408.zip and addonsu-arm-signed.zip on an I9195.
Hey there,
can I flash a ROM without losing my data?
I'd like some bugs fixed, but setting the phone to my liking every time is a pain in the butt.
Tallmios said:
Hey there,
can I flash a ROM without losing my data?
I'd like some bugs fixed, but setting the phone to my liking every time is a pain in the butt.
Click to expand...
Click to collapse
If you have LineAgeos 14.1 as your current rom, then it is okay, if you have stock or another branch, then a full "start from beginning" is the good choice!
BTW, there are new 04-11 build if you have the i9195 version!
ugynok said:
If you have LineAgeos 14.1 as your current rom, then it is okay, if you have stock or another branch, then a full "start from beginning" is the good choice!
BTW, there are new 04-11 build if you have the i9195 version!
Click to expand...
Click to collapse
I have the i9195 dual-core version (LTE serralnotex), the ROM's one of the very early January builds.
So it's as simple as making a backup, downloading the install file to my SD card and flashing it?
Lovely!
Updated the phone. The bugs are now gone, I can set battery options and camera works flawlessly.
Substratum works fine with this build as well (previously had a bootloop warning).
Thanks for the heads up and big props to the developer(s).
For some reason, sometimes when I try to enable cellular data it doesn't work (The "H" icon doesn't show and there's no connection).
Anybody else have this issue? or a fix?
(Using the 20170408 build btw)
Racc145 said:
For some reason, sometimes when I try to enable cellular data it doesn't work (The "H" icon doesn't show and there's no connection).
Anybody else have this issue? or a fix?
(Using the 20170408 build btw)
Click to expand...
Click to collapse
You should set the APN settings, I guess... Search the right one, my telenor has: "online" APN settings.
EDIT: Only sometimes? Then I have no clue about this, I'm using wifi only.
Using build 0411, will upgrade tomorrow for a recent one.
ugynok said:
You should set the APN settings, I guess... Search the right one, my telenor has: "online" APN settings.
EDIT: Only sometimes? Then I have no clue about this, I'm using wifi only.
Using build 0411, will upgrade tomorrow for a recent one.
Click to expand...
Click to collapse
Yeah... still happens on 20170416 build. Happens for like 50-60% of the time.
APN settings are fine, I'll check them again. If they are okay, is there any idea how to fix?
Did it happen on your device? (i9195)
Racc145 said:
Yeah... still happens on 20170416 build. Happens for like 50-60% of the time.
APN settings are fine, I'll check them again. If they are okay, is there any idea how to fix?
Did it happen on your device? (i9195)
Click to expand...
Click to collapse
I am using wifi only
Maybe another i9195 user can test this issue.
ugynok said:
Hello!
I saw that the xda topic lack of fresh builds of LineageOS 14.1 for S4 Mini 3G/LTE.
In this address there are new builds every day! https://visi0nary.de/builds/full/
I'm using lineage-14.1-20170408-UNOFFICIAL-serranoltexx.zip with open_gapps-arm-7.1-pico-20170408.zip and addonsu-arm-signed.zip on an I9195.
Click to expand...
Click to collapse
Hey there,
the original source is down. Do you know of any mirror?
Tallmios said:
Hey there,
the original source is down. Do you know of any mirror?
Click to expand...
Click to collapse
Use the official builds!
ugynok said:
Use the official builds!
Click to expand...
Click to collapse
I see, thanks for the heads up
Tallmios said:
Hey there,
the original source is down. Do you know of any mirror?
Click to expand...
Click to collapse
I think they have stopped builds as we now have official builds (but I'm not 100% certain), no mirror that I know of.
---------- Post added at 07:41 AM ---------- Previous post was at 07:39 AM ----------
ugynok said:
Use the official builds!
Click to expand...
Click to collapse
oops didn't see your answer on page 2 :silly:
Nope, you will lose ur data
Tallmios said:
Hey there,
can I flash a ROM without losing my data?
I'd like some bugs fixed, but setting the phone to my liking every time is a pain in the butt.
Click to expand...
Click to collapse
not possible, when you flash a new rom, you have to wipe your entire phone from your custom recovery (twrp, clockwork, etc), and then you flash your rom and gapps if you have to.
So no, when you flash a new rom, regardless of what the new rom may be, you WILL lose all your data.
Best thing to do: back up everything, and then flash your new rom.
Also, if you happen to brick it, trust me, it happens... just fastboot or odin the same firmware you had, that should unbrick your phone...
Happy Modding!
Having trouble flashing nougat to my S4mini. When i connect to Odin it does not see the file. Phone is rooted and according to Rom manager my recovery is twrp but when I proceed from there it appears to look like a stock recovery. Because Odin doesn't see any recovery zip files I cannot flash. Any help is appreciated.
Rothbury said:
Having trouble flashing nougat to my S4mini. When i connect to Odin it does not see the file. Phone is rooted and according to Rom manager my recovery is twrp but when I proceed from there it appears to look like a stock recovery. Because Odin doesn't see any recovery zip files I cannot flash. Any help is appreciated.
Click to expand...
Click to collapse
Odin can't flash zip files, that is why it does not see them. You need to use recovery to flash zips and Odin for tar files. Try relash TWRP for your phone model with Odinfrom neozones thread then use TWRP to flash zip from sd
(Edit the tar may be in the zip file, but you need to unzip it first)
i9195i
Hi guys,
Can I flash this on the i9195i Variant?
Ta
kpjuk said:
Hi guys,
Can I flash this on the i9195i Variant?
Ta
Click to expand...
Click to collapse
No, different Models
I noticed that other versions of the note 3 have roms which run android 7.0, but I have not been able to find any which support the verizon version. are there any available for the Verizon Note 3?
Not touchwiz, I thought I saw aosp cyan type Rom some where but it wasn't for cdma model as far as I know
Sent from my SM-G955U using Tapatalk
I'm using the Resurrection Remix ROM that's currently running 7.1.2! I've been using it for a month now and it's fantastic.
Mushimumu said:
I'm using the Resurrection Remix ROM that's currently running 7.1.2! I've been using it for a month now and it's fantastic.
Click to expand...
Click to collapse
On a Verizon note 3? Does everything work? Where did you download the rom from?
strauby said:
On a Verizon note 3? Does everything work? Where did you download the rom from?
Click to expand...
Click to collapse
I used this one https://forum.xda-developers.com/galaxy-note-3/development/unofficial-resurrection-remix-t3528943 I rooted and flashed this to my phone when I was still on Lolipop! everything works, but the spen still kinda works, but you can't see its location on the screen and it doesn't work in some places. But, with some tweaks you can probably make it work, I was just being lazy
Mushimumu said:
I used this one https://forum.xda-developers.com/galaxy-note-3/development/unofficial-resurrection-remix-t3528943 I rooted and flashed this to my phone when I was still on Lolipop! everything works, but the spen still kinda works, but you can't see its location on the screen and it doesn't work in some places. But, with some tweaks you can probably make it work, I was just being lazy
Click to expand...
Click to collapse
How were you able to install it? When I try to flash it, it fails saying "E3004: This package is for device: SM-N900V,hltevzw; this device is hlte'
robotnikman said:
How were you able to install it? When I try to flash it, it fails saying "E3004: This package is for device: SM-N900V,hltevzw; this device is hlte'
Click to expand...
Click to collapse
Can you post your phone specs? This only worked for me while I was on lollipop! If you are currently trying on lolipop, make sure that PL1 you roll back to OF1 by flashing this http://updato.com/firmware-archive-select-model?record=E930D4F2233B11E6949E0CC47A44B7B2 I flashed the ROM using TWRP recovery
robotnikman said:
How were you able to install it? When I try to flash it, it fails saying "E3004: This package is for device: SM-N900V,hltevzw; this device is hlte'
Click to expand...
Click to collapse
While you are correct for using an hlte recovery (they merged device support) most ROMs/update packages have a check for the model at the very beginning of the updater-script. You can manually edit the ROM package to remove that check or just temporarily use an hltevzw recovery.
---------- Post added at 11:03 PM ---------- Previous post was at 10:43 PM ----------
Mushimumu said:
I used this one https://forum.xda-developers.com/galaxy-note-3/development/unofficial-resurrection-remix-t3528943 I rooted and flashed this to my phone when I was still on Lolipop! everything works, but the spen still kinda works, but you can't see its location on the screen and it doesn't work in some places. But, with some tweaks you can probably make it work, I was just being lazy
Click to expand...
Click to collapse
SPenCommand works great and does add a little circle cursor under the stylus. https://plus.google.com/communities/104634120781641997201
Mushimumu said:
I'm using the Resurrection Remix ROM that's currently running 7.1.2! I've been using it for a month now and it's fantastic.
Click to expand...
Click to collapse
Can you elaborate more please?
I'm coming from 6.0.1, OF1 baseband N900V, and I don't use Verizon network\LTE, but GSM HSDPA.
Which version do I need to flash?
Thanks!
I downloaded this rom and installed it on my Verizon note 3, I currently had 5.0 of1 installed with a jasmine rom, wanted to try this...downloaded to my SD card , booted to twrp recovery, did a full wipe and installed this rom and gapps, everything was working good except it didn't recognize my Sim card, even pulled the battery and Sim and tried reinsert it, still said no mobile network found...any ideas? I am on Verizon network..
Never mind, I think it was because I didn't have the hltevzw twrp installed