Question about lock screen - G2 Q&A, Help & Troubleshooting

Hi guys, I have replaced my screen today and the problem is that sometimes when I click the unlock button it shows me the screen and then goes back to a blank screen as if I just pressed the lock screen again this happens a few times then it lets me use my phone. Does anyone maybe know why or know solution out there.
Thank you

I have seen this sort of problem on my G2 VS980 which turned out to be an issue caused by not having enough light in the room. It's been a couple of years since it happened, so I don't remember if the phone settings had anything to do with it. If this is happening when the phone is in a dark area, then try turning on a nearby light and see if it behaves normally.
Sent from my VS985 4G using Tapatalk

Related

G1 Screen problem

Hello, My G1 has just suffered a problem, i was scrolling down a web page and the screen faded out like it had lost power but the backlight was still on, the keys lit up and it still could make the trackball clicking noise when you moved it. I took out the battery and left it for 5 minutes and rebooted my phone and the screen turned on for about 3 seconds and faded out like before but it did boot into android as I heard the notification/startup sound. I think that the screen has burnt out but im not shore so has anybody had this problem before and/or might know how to fix it
Just some more infomation, If the screen dies and I leave it for a few minutes, when I unlock it or slide the screen up, the screen works for a few seconds but then fades. Also the fading looks like the screen lost power or like its losing pixels
From my experience with phone hardware this doesnt look like screen problem, but rather the lamp driver in the motherboard. the only way to narrow down is test the motherboard /screen with another phone.
If this is the case, it might require servicing the backlight driving circuit, which by far requries soldering/desoldering some components in motherboard.
wilkinlp01 said:
Hello, My G1 has just suffered a problem, i was scrolling down a web page and the screen faded out like it had lost power but the backlight was still on, the keys lit up and it still could make the trackball clicking noise when you moved it. I took out the battery and left it for 5 minutes and rebooted my phone and the screen turned on for about 3 seconds and faded out like before but it did boot into android as I heard the notification/startup sound. I think that the screen has burnt out but im not shore so has anybody had this problem before and/or might know how to fix it
Click to expand...
Click to collapse
had the same problem its a hardware issue. tmobile sent me a new phone no questions asked
Thanks for the replies, it seems that it has fixed its self as I've been using it for about 5 hours and no problems so far, I'm using it right now to type this, if the problem persists I will try and fix it or just buy a new one

Screen issues (Flickered then went black)

Woke up today to my alarm. Was going though emails when the screen started flickering. I rebooted the device and after a few more flickers it went black.
A little background - Phone is running Galaxy S 3 software. Didnt drop it recently or do anything out of the ordinary.
I can unlock it and it kicks back with vibration. I know it unlocks as then i can hear the volume key chimes when pressing vol up and down.
Could this be a power cable to the screen came loose? or am i screwed and have to get a new phone??
Any help would be very appreciated.
You could always try getting to the camera app, either through the lockscreen or the camera button. It should light up your screen then you could go change the brightness in the settings.
Sent from my Dark Jelly Belly using xda app-developers app
Frank343 said:
You could always try getting to the camera app, either through the lockscreen or the camera button. It should light up your screen then you could go change the brightness in the settings.
Sent from my Dark Jelly Belly using xda app-developers app
Click to expand...
Click to collapse
Yeah i tried that. The screen itself is just not turning on. Time to get a new phone i guess. I have ready horror stories about trying to replace them. I just wish Tmobile had a HTC device that i liked.
So after the last two weeks of using a blackberry,:crying:, i finally ordered a GS3. When i got it yesterday i decided to pull the SD out of the mytouch. Then the phone booted up with the screen working again!!! I have been playing with it all day and there are no more flickering or dead screen issues. Looks like i have a back up now. I still dont understand what was wrong or why it just decided to work after two weeks of being shut off.

[Q] Screen flickering?

After hanging up from a phone call the top left corner of my screen was really bright. There were two vertical lines down the screen and the screen was transparent and flickering. I could still see my home screen and the screen was functional. I restarted the phone and it was still acting up. Only after turning the phone off for a few mins did it stop. Has anyone else experienced this or have any ideas on what would cause it? I haven't had any issues with the phone, no drops or anything. Currently running aokp with matrix kernel.
theville502 said:
After hanging up from a phone call the top left corner of my screen was really bright. There were two vertical lines down the screen and the screen was transparent and flickering. I could still see my home screen and the screen was functional. I restarted the phone and it was still acting up. Only after turning the phone off for a few mins did it stop. Has anyone else experienced this or have any ideas on what would cause it? I haven't had any issues with the phone, no drops or anything. Currently running aokp with matrix kernel.
Click to expand...
Click to collapse
I had this issue too. My phone just arrived today. In my case the problem occurred after power cycling the phone (trying to get the WiFi to connect.. grrrr) The boot process was fine but once I got to the launcher my screen was flickering like a strobe light. I tried to power off and back on and it still happened. I didn't give it several minutes like you did so I'm not sure if it would have gone away. Since I hadn't really configured the phone yet I simply did a factory reset and it was fine. Seems to be a software issue. I hope it doesn't happen again but if it does I'll see if just leaving it off for a while helps. I hope so because I don't want to have to factory reset all the time!
-Matt

Knock knock not as responsive waking up...

Sometimes I have to knock knock twice in a row to turn on the device. It works well turning off, but on half of the times it won't turn on. Gotta do it twice. Anyone else encounter this?
Sent from my LG-D803 using Tapatalk 4
Brava27 said:
Sometimes I have to knock knock twice in a row to turn on the device. It works well turning off, but on half of the times it won't turn on. Gotta do it twice. Anyone else encounter this?
Sent from my LG-D803 using Tapatalk 4
Click to expand...
Click to collapse
I do not have that issue, but I have read in a few posts that it can be dependent on where you are knocking on the screen.
hd-renegade said:
I do not have that issue, but I have read in a few posts that it can be dependent on where you are knocking on the screen.
Click to expand...
Click to collapse
Yes! Excellent advice
Sent from my LG-D803 using Tapatalk 4
Brava27 said:
Yes! Excellent advice
Sent from my LG-D803 using Tapatalk 4
Click to expand...
Click to collapse
I think the biggest issue is knock speed.... mine works damn near 100% when I slowed down some, and knock slower like it showes at the end of the G2 commercials....
I think it's partially related to the proximity sensor. There are times when I can't get the knock on to work at all and when I hit the power button the screen shuts right back off.
Usually a few swipes over the sensor makes it work again. Sometimes I'll go in and turn the Knock On gesture off and back on and then it seems to work great for a while too.
csmith8507 said:
I think it's partially related to the proximity sensor. There are times when I can't get the knock on to work at all and when I hit the power button the screen shuts right back off.
Usually a few swipes over the sensor makes it work again. Sometimes I'll go in and turn the Knock On gesture off and back on and then it seems to work great for a while too.
Click to expand...
Click to collapse
This is my exact problem. The phone just decides it doesn't want to wake up with knock-on...but after I press the power button, it only turns on for half a second and it's out again. I never tried swiping over the sensor, but hopefully it works because it's mighty annoying when it does it during a call!
I wonder if there's a fix for this?
canecbr600 said:
I think the biggest issue is knock speed.... mine works damn near 100% when I slowed down some, and knock slower like it showes at the end of the G2 commercials....
Click to expand...
Click to collapse
this, if you are trying to do it like you did on the nokia n9 or nokia 8800 then it won't work
slow deliberate knocks are the only way
waiting on the g2 to arrive, but on my review unit, knock knock wouldn't respond correctly if i left the phone on the table, but if i picked it up, it would work nothing scientific here just an experience of one person and one prototype
I had the same issue... What fixed it is: 1. I found that the screen protector was hindering it somewhat. 2. Go to settings->display->screen-off effect-> and change it to simple. This REALLY seemed to help. Let us know!
in_dmand said:
I had the same issue... What fixed it is: 1. I found that the screen protector was hindering it somewhat. 2. Go to settings->display->screen-off effect-> and change it to simple. This REALLY seemed to help. Let us know!
Click to expand...
Click to collapse
I did notice it does seem to behave better when set to simple for the screen off animation.
My screen protector does have a cutout around the sensors. Keeping the sensor area clean enough to qualify as having OCD does seem to make it work properly the first time, every time. Maybe it's overly sensitive?
Edit: Scratch that. 30 seconds later it's behaving erratically again. Maybe it's not the fact that it's clean, but the swiping over the sensor that temporarily resolves it.
it also seems to work much better when knocking at the top of the screen where the statusbar would be.
So I ended up swapping the phone out over the weekend for a new one and now everything seems to work just fine. Seems to indicate that it's not a software problem, but rather a hardware issue with the proximity sensor.
Guys if your covering the sensors when turing the device screen on it will turn right back of on you. It's a feature LG implemented so the device wouldnt wake up in your pockets. Don't cover the sensors.
Need a little example? Grab your phone and cover the sensors and knock knock knock.You can knock till the cows come home but it will not turn on. Same thing goes for the power button but its a little delayed and will turn the screen on for half a sec and turn right back off. Practice not to do this because your phone isn't broken. There is actually a thread on this deep in the forums somewhere but its been forgotten now.
Walter21026 said:
Guys if your covering the sensors when turing the device screen on it will turn right back of on you. It's a feature LG implemented so the device wouldnt wake up in your pockets. Don't cover the sensors.
Need a little example? Grab your phone and cover the sensors and knock knock knock.You can knock till the cows come home but it will not turn on. Same thing goes for the power button but its a little delayed and will turn the screen on for half a sec and turn right back off. Practice not to do this because your phone isn't broken. There is actually a thread on this deep in the forums somewhere but its been forgotten now.
Click to expand...
Click to collapse
This is true however there are indications of problems with the proximity sensor as well. Some of the devices are behaving as if tree sensor is covered even when it's not.
Walter21026 said:
Guys if your covering the sensors when turing the device screen on it will turn right back of on you. It's a feature LG implemented so the device wouldnt wake up in your pockets. Don't cover the sensors.
Need a little example? Grab your phone and cover the sensors and knock knock knock.You can knock till the cows come home but it will not turn on. Same thing goes for the power button but its a little delayed and will turn the screen on for half a sec and turn right back off. Practice not to do this because your phone isn't broken. There is actually a thread on this deep in the forums somewhere but its been forgotten now.
Click to expand...
Click to collapse
Thanks for this.. Very insightful.. I tried it immediately LOL
I had the same issue. I have no case or screen protector on, and was not covering the sensor when trying to wake the phone. For some reason though, knocking wouldn't wake the phone, and pressing the power button would only turn the screen on for a few seconds. I want even given enough time to get past the unlock screen. I went into the store and they are sending me a replacement that should come in later this week. It doesn't happen all the time. It is much more noticeable after receiving a call though.
Sent from my VS980 4G using Tapatalk
Definitely is dependent on the proximity sensor. If i just have my thumb on the edge of the phone by the sensor it will display this problem. Even with my finger a half to one inch above it will do this. I will be paying close attention to the proximity sensor from now on when it doesn't work. Still have a few days to return and thought i had an issue but maybe not.
Sent from my VS980 4G using xda app-developers app
sometimes its also greasy fingers, at least in my case, rarely though
As long as you tap twice the same place it's working fine. If distance between first and second tap is greater than 1 - 1.5 cm it won't work.
Got the same problem on my d802...when i left the phone on my table for 2-3min it wont wake up on first knock knock even power key wake it up for 1sec after auto turn off again....even with no screen protector....i noticed that sometimes there is a delay about 5-10sec after knock knock and screen turns on....other thing i noticed when i knock on immediently after turning off it works 100%....BUT i also noticed when i knock on after a while it turns on and i can unlock got vibration and sound of the unlock but i cant see anything. Screen looks like its off but when i look closely i can hardly see widgets and when i set effect to tv out i can see the effect by pressing the power button...when i press the power button again screen turns on like normal...i noticed sometimes on a rerboot the lg bootlogo disapears the led is working an showing all colors but the boot animation is gone like the screen is off at the bootup...dont know why after the bootup the pin lock screen is showing up normal....sorry for my english^^

[Q] VS980 Stock OTA - Lock Screen Glitch?

I've actually had no luck finding anyone reporting this issue, but it's one that is really starting to bug me...
Sometimes, when I turn the phone on, rather than the traditional lock screen, the camera screen that you can ordinarily get to from the lock screen shows up...but it's not the full camera screen; it fills up like 3/4 of the screen, and the buttons have no functionality. Almost as if I had swiped over to the camera, but it froze about halfway through opening it.
I have tried to discern a pattern here, but there doesn't appear to be one...whether I turn on the screen with the power button or knock-on, it still happens randomly. I thought for a while that it only happened when I locked the phone with an app running on the screen, but that proved to be incorrect as well.
Like I said, having no luck finding anyone else reporting this. Has happened since I got the phone, even after updating. I've got a feeling its just a glitch I'm not going to do anything about, but if anyone has had any luck making this stop, I would greatly appreciate some advice!

Categories

Resources