Whene i root my S7e and have knox 0x1, can i see this whene i start the phone or only see knox 0x1 whene i go in the download mode?
Download Mode
Related
Hey guys, new here and just signed up to find a solution for this problem.
When I enter download mode, it shows that both my current binary and the system status is custom.
Knox Warranty void: 1
And AP SWREV: A3
Now Odin does not detect the phone upon connecting it, the phone is bootlooping continuously. Seriously panicking.
Bump...
have you tried to reinstall drivers/Kies on your PC?
So i follow http://forum.xda-developers.com/xperia-l/development/rom-updated-ios7-extreme-edition-t2560915 to install a ROM then I realize that is a JB rom .
Now my phone stuck at Odin mode and could not do normal boot
Detail:
Could not do normal boot.
ODIN MODE
PRODUCT NAME : SM-N9005
CURRENT BINARY :Custom
SYSTEM STATUS : CUSTOM
REACTIVATION LOCK (KK) : OFF
KNOX KERNEL LOCK : 0X0
KNOX WARRANTY VOID : 0X1
QUALCOM SECUREBOOT : ENABLE (CSB)
RP SWREV : S2,T2,R2,A3,P3
WIRTE PROTECTION : Enable
USC START
I tried restored my nanoid backup but it doesn't work , please help !
Problem solved
Solution : I use Odin to install stock firmware and everything works fine now
I tried to root my Note 3 SM-N900W8 with Odin 3.07. When ODIN showed passed, I removed the cable but the phone was stuck at keep rebooting showing:
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
It never showed Set Warranty Bit: recovery
I had to remove the battery to stop the rebooting. After I turned on the phone at the Download Mode page, it shows the following:
ODIN MODE
PRODUCT NAME: SM-N900W8
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S2, T2, R2, A3, P2
WRITE PROTECTION: Enable
UDC START
When I tested the phone with Root Checker whether it's rooted. The app said it is not rooted.
I tried to run ODIN to root the phone again and I ran into the same rebooting problem again.
I also cannot open the Recovery Mode screen (Volume up + Menu + power). The phone would show RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING but nothing happens after.
If anyone knows how to fix and root the phone, please kindly let me know.
Weird..double check if the rooting file(the 1 u downloaded frm chainfire) is for sm-n900w8 only..
Sent from my SM-N900 using XDA Premium 4 mobile app
Hi. Samsung Galaxy S4 GT-i9506. Tried to root/install Lollipop 5.0.1 (I had 4.2.2 KitKat).
So everything failed miserably. As it stands now, I can ONLY enter download mode with the phone and in ODIN MODE. I can connect phone to PC and use odin on PC. Can NOT enter recovery mode, it fails and shuts down the device. Only download mode through vol.down+home+power button.
I just want to be able to use my phone, so can someone explain step-by-step what I need to do to get my phone working again? Full reset or anything like that doesn't matter, I have backup, I just want the phone to work again.
It says on the screen (Downloading... Do not turn off target!!) with an android logo.
Could not do normal boot.
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P1
WAITE PROTECTION: Enable
UDC START
I have Odin+3.09.
SGH-i337
ODIN MODE: SGH-I337
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: ENABLE
eMMC BRUST MODE ENABLED,
i have tried I337UCUFNB1 failed on intial stage,
i have also tried .Pit it also failed in intial stage
i am not able to get 3e recovery and i cant install cwm in this phone
please help
i flashed philz_touch_6.15.4-jflteatt.tar.md5 this. odin flash failed but phone is booting on custom logo but could not get into 3e recovery. now it is confirm that kitkat 4.4.4 or lollipop were installed in this phone somebody please tell me how to unbrick this phone
john-ammu said:
SGH-i337
ODIN MODE: SGH-I337
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: ENABLE
eMMC BRUST MODE ENABLED,
i have tried I337UCUFNB1 failed on intial stage,
i have also tried .Pit it also failed in intial stage
i am not able to get 3e recovery and i cant install cwm in this phone
please help
Click to expand...
Click to collapse
According to your post, you phone has rooted in the past and knox counter was tripped one time (either could be caused by the flashing to the lower bootloader or installing the custom recovery).
The phone has locked bootloader as such you can not install custom recoveries like CWM or TWRP. To flash the zip rom you are stuck with either safestrap or flashfire.
To unbrick your phone, go here , get the files and follow the step to install the NB1 firmware.
Maybe this thread will help: http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642