Hey guys, new here and just signed up to find a solution for this problem.
When I enter download mode, it shows that both my current binary and the system status is custom.
Knox Warranty void: 1
And AP SWREV: A3
Now Odin does not detect the phone upon connecting it, the phone is bootlooping continuously. Seriously panicking.
Bump...
have you tried to reinstall drivers/Kies on your PC?
Related
I have the following problem and no matter what I try I can't get it to boot normaly.
The device is a SM-N9006 which was rooted with RDLV and MJ3 firmware. I put echoe rom on it and it was working fine.
A few days ago I wanted to update the firmware, so I downloaded the new echoe rom which installed through cwm nicely but after booting into it it kept hanging (not responding). Even the initial configuration had to be done in 4-5 parts because of the restarts that needed to bring it back to life.
So I decided to Flash a Stock firmware on it. Used N9006ZCUENF3_N9006CHNENF3_CHN in Odin, After restart the phone surprised me with the message:
Could not do normal boot.
ODIN MODE
PRODUCT NAME: SM-N9006
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A2, P1
WRITE PROTECTION: Enable
At this time also didnt work so whatever I tried to boot I ended up at this message. Tried to install several CWM versions which didnt help but after installing Philz Recovery, I could get into recovery but still no luck in booting normaly.
Tried flashing N9005 firmwares which failed in Odin (which worked before).
The only stock firmwares I can use now are the N9006 ones but no matter which one I try nothing lets me boot normaly.
Tried the Download Mode entry - Cancel method, the battery, SIM takeout method. Did several data, cache, dalvik deletion, nothing helps.
Please help what should I do?
hey everyone out there that can help me
i tried to root my phone but it stopped midway. then i got it working again, but my dataroaming was disabled. so i did a factory reset and now it is stuck in Odin mode.
i have red hundreds of threads on this put when i start up my phone it says:
Could not do normal boot
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P1
WRITE PROTECTION: ENABLE
UDC Start
i have tried to pull out the battery and the sim card. it didn't work
i have tried reinstalling the stock firmware with odin3 v1.85
i have tried the same with samsung kies 3 it doesn't even recognise (sorry if mispelled) the device
please help
I would Odin flash a recovery and format everything on the phone before attempting to odin flash official firmware.
Make sure you are flashing the latest 4.4 that your carrier has released.
http://www.sammobile.com/firmwares/
Just flash a 4.4.2 stock rom true Odin that is for you device.
Hi. Samsung Galaxy S4 GT-i9506. Tried to root/install Lollipop 5.0.1 (I had 4.2.2 KitKat).
So everything failed miserably. As it stands now, I can ONLY enter download mode with the phone and in ODIN MODE. I can connect phone to PC and use odin on PC. Can NOT enter recovery mode, it fails and shuts down the device. Only download mode through vol.down+home+power button.
I just want to be able to use my phone, so can someone explain step-by-step what I need to do to get my phone working again? Full reset or anything like that doesn't matter, I have backup, I just want the phone to work again.
It says on the screen (Downloading... Do not turn off target!!) with an android logo.
Could not do normal boot.
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P1
WAITE PROTECTION: Enable
UDC START
I have Odin+3.09.
Hi all,
I have tried almost everything to bypass my old device.
I have used Odin with TWRP, and it says its FRP locked.
As soon as the screen comes on(no matter what key combo I press) this is what I see:
ODIN MODE (MULTI CORE DOWNLOAD)
PRODUCT NAME: SM-G361F
CURRENT BINARY:Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
KNOX WARRANTY VOID: 0x0
Secure Download : Enabled
RP SWREV: S1, L1, M1
Underneath there is a message: Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
I have tried Kies (all versions), I have used the .tar files in odin on the AP tab but I get a prompt that it's FRP locked (in green text) along with the message above. I cant get into the download modeof the phone. Is there any way around this? Probably not but worth a shot in the dark.
Appreciate it if you can find a solution.
jeff8585 said:
Hi all,
I have tried almost everything to bypass my old device.
I have used Odin with TWRP, and it says its FRP locked.
As soon as the screen comes on(no matter what key combo I press) this is what I see:
ODIN MODE (MULTI CORE DOWNLOAD)
PRODUCT NAME: SM-G361F
CURRENT BINARY:Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
KNOX WARRANTY VOID: 0x0
Secure Download : Enabled
RP SWREV: S1, L1, M1
Underneath there is a message: Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
I have tried Kies (all versions), I have used the .tar files in odin on the AP tab but I get a prompt that it's FRP locked (in green text) along with the message above. I cant get into the download modeof the phone. Is there any way around this? Probably not but worth a shot in the dark.
Appreciate it if you can find a solution.
Click to expand...
Click to collapse
SAME. Did you fix it somehow?
I tried downloading at least 10 different firmwares from the latest to the original 5.1.1 that was installed on the phone. Either odin freezes or they are corrupted. Is there any hope?
THe short story: Root was a success. Tried to open snapchat, read the whole story on that. Decided lets get the xposed framework. After going through the hassels TWRP and CWM wouldn't let me flash (ready for the stupidness on my part?) so I found another tool that would let me flash (this https://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960) and wellI ended up with the downloading screen. It all looks normal here is what it says
Could not do normal boot
ODIN Mode (highSpeed)\Product NAME: SM-N910T\CURRENT BINARY: CUSTOM
REACTIVATION LOCK: OFF
KNOX WARRANTY: 0X1 (3)
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
I tried using keis firmware upgrade I type in the model and serial but it tells me" the model information that you have entered cannot be verified; the device initialization cannot proceed" there is a space after the main s/n and then a wx but if i try it with or without the space at the end it fails to accept it.
On a totally separate note if i were to buy another phone, could I root that phone remove the bloatware, unroot the phone. Snapchat should work properly then right?
Is it possible to have a brand new phone, copy the firmware from it
on the corrupt phone erase it completely and flash the firmware from the new phone onto it (basically a clone)?
What are terms I would look up to accomplish such a task if it is possible? Or even a guide?