Where can I find custom Roms for the verizon galaxy note 3 after I update to kitkat 4.4.2 I haven't been able to find any on xda ?
shogun3340 said:
Where can I find custom Roms for the verizon galaxy note 3 after I update to kitkat 4.4.2 I haven't been able to find any on xda ?
Click to expand...
Click to collapse
Look in the Android Development section of this forum.
There has only been a few released but SS rom slots 1 through 4 not working yet so not able to keep a safe partition
Galaxy Note 3 Stock Rooted Xposed
Galaxy Gear Rooted Null Rom
Suck It Nerds!
help installing the baja Rom
I know this is a dump quetion but im trying to install bajarom final.....im doiung it with safestrap 3.72 but i istall it n reboot with recovery n when i instal the rom it goes through good but ater that i put reboot finishing installing the rom ...it goes black n i wait for about 5 mins...it still black...on the lil blue light still blinking...but it doesnt install need help plz
mcloviin26 said:
I know this is a dump quetion but im trying to install bajarom final.....im doiung it with safestrap 3.72 but i istall it n reboot with recovery n when i instal the rom it goes through good but ater that i put reboot finishing installing the rom ...it goes black n i wait for about 5 mins...it still black...on the lil blue light still blinking...but it doesnt install need help plz
Click to expand...
Click to collapse
Make sure you wipe data/cache/dalvik before installing and allow the rom to fully install in safestrap before trying to reboot. Safestrap will prompt you when it's completed. Hopefully I'm understanding your question.
i've followed correct procedures for rooting note 4 sm-n910f, with correct drivers installed on windows, i've tried cwm and twrp to install x-note rom, bobcat rom and another for my 910f.... but all i get is bootloop at manufacturers logo ... is my three note 4 bootlocked... and is there anything i can do to remedy this ... thanxs in advance Stu. (i have no problem putting stock roms back on wether it be 4.4.4 or 5.0.1 with odin 3.07 or 3.09)
Hi,
Thanks for using XDA Assist It would be better if you post it here so that your device specific experts can help you Samsung Galaxy Note 4 Help and Troubleshooting
kindly bookmark it for future reference
Good Luck!
I'm guessing your root attempt was on Kitkat, as the autoroot files have been upgraded for Lollipop roms.
I would suggest flashing a stock 5.0.1 rom, and see if that cures your boot loop.
Alternatively it could just be as simple as requiring a full wipe from recovery.
Sent from my SM-N910F
i am experiencing same problem with my Note 4 SM-N910F ,Would be gratefull if any 1 can help .
So I have a Note 4 SM-N910G Variant Currently running 5.1.1 Lollipop and I'm looking forward to root it since my warranty is over. (Snapdragon) I want to flash dr.ketan's rom ( http://forum.xda-developers.com/note-4/snapdragon-dev/n910g-dr-ketan-custom-rom-t2928568 ) but obviously I need to root my phone first.
I have researched through many youtube videos and website for Rooting and to my understanding, I need to download a kernel and flash a recovery called TWRP, flash SuperSU and then flash the ROM itself.
But so far, All I could find were kernels for other variants except N910G, some of them said that I can use the kernel for N910F ( http://forum.xda-developers.com/note-4/orig-development/tw-kernel-emotroid-team-t2990557 )
Can someone help me? And correct me if my understanding of the root procedure is wrong.
Really really really appreciated If you can help me
I tried to flash a kernal for SM-N910F 5.1.1 on my SM-N910G and it stopped my phone from booting (soft brick, got stuck on the first Samsung splash screen). I'm fairly certain that I did it correctly but I am new to Android so it might have been my mistake. I did get my phone working again by downloading the vanilla 5.1.1 SM-N910G firmware using SamFirm and installing it via Odin.
EDIT: I have successfully rooted my device using Noname Kernal http://forum.xda-developers.com/showpost.php?p=63217526
Hello ,i have a phone samsung note 3 SM N9006,rom 4.4.2 , the problem is that I can not install any recovery may not install or PhilZ CWM Touch Recovery 6 .
What is the problem?
Tnx.
kppus said:
Hello ,i have a phone samsung note 3 SM N9006,rom 4.4.2 , the problem is that I can not install any recovery may not install or PhilZ CWM Touch Recovery 6 .
What is the problem?
Tnx.
Click to expand...
Click to collapse
1. Try with this ONE.
2. (If the step 1 doesn't work) Reflash the same firmware that you are using if you flashed a lot of recoveries and you messed the recovery installed. Try again the step 1 when you finish the process.
I tried and does not work , and if you install another firmware i lose google play and rest , bought 4.4.2 fot the phone and install google play or gaps on it, I did not realize it was installed because it is not rooted .
Here is the China N9006 root thread .
http://forum.xda-developers.com/showthread.php?t=2495375
- The Samsung Galaxy Note 3 (China/WCDMA) SM-N9006 doesn't officially have Google Play, Gmail, and the essential lot of Google Services.
I tested but no work.
This man @ goukison have some problem same me , http://forum.xda-developers.com/showthread.php?t=2495375&page=7
Hello,
I have a N9005 that I'm tryin to install a custom ROM (I have another one already with Norma v29 working perfectly). In this one I flashed the original 5.0 firware and then tried to root, isntall custom recover, custom rom, etc., as I normally do. With this phone I can root and install custom recovery but every custom ROM i tried I always have a bootloop on Galaxy Note 3 screen (tried Norma, Phonesis, etc.).
I can reflash to an original ROM but don't understand why it doesn't work with a custom ROM.
Can any one help me? I even tried to change bootloader on a specfific tutorial for Norma v29.
Thank you in advance!
Boot to download mode and check the model first .
Is this a used phone ??
Hello. Yes is a used phone. The model is a SM-9005. The roms I'm using are for this model. I tried again a Lolipop 5.0 stock rom, then root, then recovery (until here everything works). Then applied Norma V29 and i'm stuck again at the Galaxy Note 3 screen, the blue led starts to blink and then the phone restarts. Really can't understand. Even tried the same memory card from my Note. Well the only difference is that one is 16GB and this one is 32GB. Any stock rom work perfectly but didn't want to use them.
Can it be that the internal memory size is causing the issue? is the only difference....can someone help?
Well my original phone is a 32GB. Don't know why the hell I was thinking 16GB... so most weired. If someone could help will be great. It's working with the stock 5.0 and rooted with CM-AUTO.
before flashing custom firmware you should enter the recovey and make complete format for both cache and data partitions.
after the firmware install it might take the system up to 10 minutes to boot.
Thank you for the answer. i'm doing all the steps (I changed roms on Note 3 for some time now). This one startups on the Galaxy Note 3 Screen, the led starts to blink (like 4-5 times) and restarts himself. So is not waiting time. made factory resets, all the wipes, even a script I found for fixing EFS. When I flash a Android 4.4 or 5.0 stock from SamMobile just works.
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
adel alsayed said:
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
Click to expand...
Click to collapse
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Dan0v said:
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Click to expand...
Click to collapse
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
adel alsayed said:
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
Click to expand...
Click to collapse
Suggests you are using the wrong TWRP version .
Read the roms instructions/ search thread .
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
golalmo said:
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
Click to expand...
Click to collapse
i use it already but given faild my phone is n90005 32 gb I don't know what can I do for install ux 9.7 rom
Does any other rom install ??
JJEgan said:
Does any other rom install ??
Click to expand...
Click to collapse
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
adel alsayed said:
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
Click to expand...
Click to collapse
then check the md5 of magma nx9.7..!
read the how to install in tge magma rom.. sometimes something small will interrupt the flashing
fabio.teles said:
Hello,
I have a N9005...
Click to expand...
Click to collapse
I thought I'd clean up the phone.
I installed via ODIN official fw = Lollipop.
Then root + TWRP 3.1.1.
Next installing custom rom RR 7.1.
ERROR
I resolved as follows:
Installing "CP_N9005XXUGBPB1_MODEM.tar" + "BL_N9005XXUGBPB2_BOOTLOADER.tar"
Now RR installation is successful!
But "not SIM" (can not enter PIN)
Solution:
Override file "libsec-ril.so". Here is: Root / System / lib / libsec-ril.so
Done - it works!
Files here: https://ulozto.cz/!M6PZA7EKQHNe/xda-zip
It helped me. Will it help you too?
*******
Thanks @"Anon_Help_You" !!!
(https://forum.xda-developers.com/galaxy-note-3/help/solution-lineage-os-sim-t3640689)