Hello ,i have a phone samsung note 3 SM N9006,rom 4.4.2 , the problem is that I can not install any recovery may not install or PhilZ CWM Touch Recovery 6 .
What is the problem?
Tnx.
kppus said:
Hello ,i have a phone samsung note 3 SM N9006,rom 4.4.2 , the problem is that I can not install any recovery may not install or PhilZ CWM Touch Recovery 6 .
What is the problem?
Tnx.
Click to expand...
Click to collapse
1. Try with this ONE.
2. (If the step 1 doesn't work) Reflash the same firmware that you are using if you flashed a lot of recoveries and you messed the recovery installed. Try again the step 1 when you finish the process.
I tried and does not work , and if you install another firmware i lose google play and rest , bought 4.4.2 fot the phone and install google play or gaps on it, I did not realize it was installed because it is not rooted .
Here is the China N9006 root thread .
http://forum.xda-developers.com/showthread.php?t=2495375
- The Samsung Galaxy Note 3 (China/WCDMA) SM-N9006 doesn't officially have Google Play, Gmail, and the essential lot of Google Services.
I tested but no work.
This man @ goukison have some problem same me , http://forum.xda-developers.com/showthread.php?t=2495375&page=7
Related
Hello , i have samsung galaxy i9500 with 4.4 (kitkat) installed on it , the Russian variant.
It has samsung knox in it but it wont me set up an account because my phone is rooted and has philz touch recovery on it.
my question is , will i be able to install MIUI 4.3.7 by flashing the zip file via Philz recovery?
i dont care about the warranty,
and if i cant flash it , why so?
sorry for my bad english!
krushenov said:
Hello , i have samsung galaxy i9500 with 4.4 (kitkat) installed on it , the Russian variant.
It has samsung knox in it but it wont me set up an account because my phone is rooted and has philz touch recovery on it.
my question is , will i be able to install MIUI 4.3.7 by flashing the zip file via Philz recovery?
i dont care about the warranty,
and if i cant flash it , why so?
sorry for my bad english!
Click to expand...
Click to collapse
Yes, u have to be able to flash it :highfive:
Hello ..
I am getting my Grand 2 today.
I am familiar with flashing, rooting, backing up, etc ..
I have done this all before with my Galaxy S3 ..
but, its been awhile ..
so, I have a few questions about the order in which to do things.
Here is to order I am planning on doing things .. is this correct?
I think my Grand 2 will have Android 4.3 out of the box. so ..
1st ... I will upgrade to 4.4 via Kies
2nd ... I will root using Odin .. and the CF method
3rd ... I will load SuperUser and BusyBox from the Play store
4rth ... I will flash CWM
(can I just get this from Play store? I have purchased the touch recovery previously and am used to the layout)
5th ... I will back up the Stock 4.4 Rom ..
and that's it ..
Is this the correct order to do things?
Should I make a recovery using the Stock Recovery before I root?
Or should I (can I) download CWM from the Play store and then make a recovery image? ..
Thank You for your help ..
I know all this is covered in various threads through out this forum ..
and I have read/bookmarked them all .. but, want to just verify that I am on the right track
THANK YOU
Before everything Have the firmware downloaded ! If u have the firmware in ur hands and if u know how to flash it then u don't need to worry abt anything and unlike s3 grand 2 doesn't have Flash counters
cocteau2x said:
Hello ..
I am getting my Grand 2 today.
I am familiar with flashing, rooting, backing up, etc ..
I have done this all before with my Galaxy S3 ..
but, its been awhile ..
so, I have a few questions about the order in which to do things.
Here is to order I am planning on doing things .. is this correct?
I think my Grand 2 will have Android 4.3 out of the box. so ..
1st ... I will upgrade to 4.4 via Kies
2nd ... I will root using Odin .. and the CF method
3rd ... I will load SuperUser and BusyBox from the Play store
4rth ... I will flash CWM
(can I just get this from Play store? I have purchased the touch recovery previously and am used to the layout)
5th ... I will back up the Stock 4.4 Rom ..
and that's it ..
Is this the correct order to do things?
Should I make a recovery using the Stock Recovery before I root?
Or should I (can I) download CWM from the Play store and then make a recovery image? ..
Thank You for your help ..
I know all this is covered in various threads through out this forum ..
and I have read/bookmarked them all .. but, want to just verify that I am on the right track
THANK YOU
Click to expand...
Click to collapse
First of all as Sanjuujosephh said you should download a firmware and then if you are rooting with CF root then there is no need to download supersu from play store . You can't get CWM from play store coz it is not available officially here's a link to unofficial CWM
http://forum.xda-developers.com/gal...ent/recovery-unofficial-cwm-sm-g7102-t2794016
kuldude said:
First of all as Sanjuujosephh said you should download a firmware and then if you are rooting with CF root then there is no need to download supersu from play store . You can't get CWM from play store coz it is not available officially here's a link to unofficial CWM
http://forum.xda-developers.com/gal...ent/recovery-unofficial-cwm-sm-g7102-t2794016
Click to expand...
Click to collapse
I was thinking that this was CWM ..
https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager&hl=en ..
Thank you for the clarification.
I have your link bookmarked and that is EXACTLY the kind of information I was needing
cocteau2x said:
I was thinking that this was CWM ..
https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager&hl=en ..
Thank you for the clarification.
I have your link bookmarked and that is EXACTLY the kind of information I was needing
Click to expand...
Click to collapse
No this only works for phones which have official CWM recovery our phone doesn't have any ...and again i recommend downloading a firmware if you live in india then here's the link to latest firmware
http://forum.xda-developers.com/galaxy-grand-2/general/stock-firmware-grand-2-google-drive-t2849501
And if you don't then you can request your firmware here
http://forum.xda-developers.com/galaxy-grand-2/general/request-firmware-t2884198
Edit :- these are links for resumable download you can download them from www.sammobile.com
I did not know about the "official/unofficial" CWM issue.
Many people recommend Philz Recovery instead ..
can anyone point me in the right direction for the correct zip for Philz?
I found a link for Philz recovery for 4.3 ...
would that work for 4.4?
My country is not listed on the SamMobile site ..
I am off to get the phone now ..
I will check the PDA and CSC versions when I get the phone . .
hopefully I will find a match ..
also .. I see some of the versions are listed .. 4.2.2, 4.4.2, 4.4.4 ... etc ..
I am assuming I will need to use the correct version as well ?
...
Unfortunately I don't know about philz recovery coz i haven't used it personally but if you want then..Here's the link
http://forum.xda-developers.com/showpost.php?p=53747111&postcount=3
And the latest version is 4.4.2 and build NH6 (in INDIA ) i can't tell about your country bcoz you still haven't mentioned it...
kuldude said:
Unfortunately I don't know about philz recovery coz i haven't used it personally but if you want then..Here's the link
http://forum.xda-developers.com/showpost.php?p=53747111&postcount=3
And the latest version is 4.4.2 and build NH6 (in INDIA ) i can't tell about your country bcoz you still haven't mentioned it...
Click to expand...
Click to collapse
I am in Thailand
I do not see any numbers that look like the PDA/CSC codes on the SamMobile site ..
My phone says ..
Model Number ... SM-G7102
Version 4.4.2
Baseband G7102DXUBNH1
Build Number KOT49H.G7102XWUBNH1
On the CF root files I see different versions NH1, NG4, NH6 ...
do these matter ? .. or can I use any of them?
Thanks
cocteau2x said:
I am in Thailand
I do not see any numbers that look like the PDA/CSC codes on the SamMobile site ..
My phone says ..
Model Number ... SM-G7102
Version 4.4.2
Baseband G7102DXUBNH1
Build Number KOT49H.G7102XWUBNH1
On the CF root files I see different versions NH1, NG4, NH6 ...
do these matter ? .. or can I use any of them?
Thanks
Click to expand...
Click to collapse
Yes these matter use the first one (NH1) bcoz you have that build no. (Look at the end of ur build no.) Hope i helped
So I'm going to root my note 4 5.01 n910f I have the file and I'm going to root, how do I then get clock work recovery onto my note 4?
Woods97 said:
So I'm going to root my note 4 5.01 n910f I have the file and I'm going to root, how do I then get clock work recovery onto my note 4?
Click to expand...
Click to collapse
hi ,
same procedure as root ,you flash it with Odin ( place phone in download mode ,connect to pc ( Odin ) etc.
.Just make sure it is correct version for your phone.
I suggest you research/Google a bit and check YouTube for a video.
I have N910F ,rooted ,CWM ,lollipop v5.0.1 ,stock Rom .
I have rooted ,flashed CWM , many times over the past months ( since October 2014 when Note 4 was released)
Worked 100%but you must know what you are doing ..!
good luck
hello, can someone help me with my Samsung sm-n9005 5.0 lollipop version bootloop problem, i was trying to update my note 3 to note 5 custom rom, i successfully rooted my phone but by the time i already download the file for note 5 rom, i wipe my data and cache using twrp 3.0 and install my darklord custom rom i ended up on bootloop. please help me guys. thank you!!!
You probably installed the wrong or no kernel, but we really need more info to go on here.
This is a question ..
As said above .One you failed to read the instructions . TWRP 3. will not work with Aroma .
Two bootloop on install how long did you wait and two did you factory reset .
Suggest you flash stock firmware then take time to read .
Hello,
I have a N9005 that I'm tryin to install a custom ROM (I have another one already with Norma v29 working perfectly). In this one I flashed the original 5.0 firware and then tried to root, isntall custom recover, custom rom, etc., as I normally do. With this phone I can root and install custom recovery but every custom ROM i tried I always have a bootloop on Galaxy Note 3 screen (tried Norma, Phonesis, etc.).
I can reflash to an original ROM but don't understand why it doesn't work with a custom ROM.
Can any one help me? I even tried to change bootloader on a specfific tutorial for Norma v29.
Thank you in advance!
Boot to download mode and check the model first .
Is this a used phone ??
Hello. Yes is a used phone. The model is a SM-9005. The roms I'm using are for this model. I tried again a Lolipop 5.0 stock rom, then root, then recovery (until here everything works). Then applied Norma V29 and i'm stuck again at the Galaxy Note 3 screen, the blue led starts to blink and then the phone restarts. Really can't understand. Even tried the same memory card from my Note. Well the only difference is that one is 16GB and this one is 32GB. Any stock rom work perfectly but didn't want to use them.
Can it be that the internal memory size is causing the issue? is the only difference....can someone help?
Well my original phone is a 32GB. Don't know why the hell I was thinking 16GB... so most weired. If someone could help will be great. It's working with the stock 5.0 and rooted with CM-AUTO.
before flashing custom firmware you should enter the recovey and make complete format for both cache and data partitions.
after the firmware install it might take the system up to 10 minutes to boot.
Thank you for the answer. i'm doing all the steps (I changed roms on Note 3 for some time now). This one startups on the Galaxy Note 3 Screen, the led starts to blink (like 4-5 times) and restarts himself. So is not waiting time. made factory resets, all the wipes, even a script I found for fixing EFS. When I flash a Android 4.4 or 5.0 stock from SamMobile just works.
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
adel alsayed said:
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
Click to expand...
Click to collapse
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Dan0v said:
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Click to expand...
Click to collapse
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
adel alsayed said:
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
Click to expand...
Click to collapse
Suggests you are using the wrong TWRP version .
Read the roms instructions/ search thread .
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
golalmo said:
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
Click to expand...
Click to collapse
i use it already but given faild my phone is n90005 32 gb I don't know what can I do for install ux 9.7 rom
Does any other rom install ??
JJEgan said:
Does any other rom install ??
Click to expand...
Click to collapse
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
adel alsayed said:
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
Click to expand...
Click to collapse
then check the md5 of magma nx9.7..!
read the how to install in tge magma rom.. sometimes something small will interrupt the flashing
fabio.teles said:
Hello,
I have a N9005...
Click to expand...
Click to collapse
I thought I'd clean up the phone.
I installed via ODIN official fw = Lollipop.
Then root + TWRP 3.1.1.
Next installing custom rom RR 7.1.
ERROR
I resolved as follows:
Installing "CP_N9005XXUGBPB1_MODEM.tar" + "BL_N9005XXUGBPB2_BOOTLOADER.tar"
Now RR installation is successful!
But "not SIM" (can not enter PIN)
Solution:
Override file "libsec-ril.so". Here is: Root / System / lib / libsec-ril.so
Done - it works!
Files here: https://ulozto.cz/!M6PZA7EKQHNe/xda-zip
It helped me. Will it help you too?
*******
Thanks @"Anon_Help_You" !!!
(https://forum.xda-developers.com/galaxy-note-3/help/solution-lineage-os-sim-t3640689)