Database Users

Solution for soft-bricked N9005 after flashing Hong Kong's TGY firmware

I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.

doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
Thanks buddy for helping me, got me up and running again :good:

You're welcome, mate!

Softbrick
Thank you thank you thank you thank you .
I always liked Hong Kong roms on note one and two and I thought I can continue the tradition .
Softbricked it , and no solution anywhere . I installed this and voila . Back in business . I also installed MJ7 on top now all is good .
Have I said thank you ?
Well thank you !

budalica said:
Thank you thank you thank you thank you .
Have I said thank you ?
Well thank you !
Click to expand...
Click to collapse
You're welcome. Did you press the "Thank you" button?

Thanks a lot. Without your post, my phone will still be bricked.

hh
That day! ! Me too

Useful info, I'm sure this will be of use in many situations.
Thankyou.
Sent from my GT-I9100 using Tapatalk 4

uscool said:
Thanks buddy for helping me, got me up and running again :good:
Click to expand...
Click to collapse
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.

lalahamid said:
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.
Click to expand...
Click to collapse
Here is the newer version from UK BTU: N9005XXUDMJ7_N9005OXADMJ4_BTU.zip
http://terafile.co/29f621508415

doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
my brick story in short is------ brought note 3 sm-n9005 from ebay from a Hong Kong based seller. pics of ap, cp and csc are attached. rooted with chainfire's and installed cwm6 by chenglu. A few days back, flashed bobcat rom version 2(mj7) and later 3( mk2 ) without problems. Was looking for different themes .yesterday flashed balckchrome from s4 forum that also went smooth. Unfortunatly flashed another theme for s4 which was not meant for andriod version 4.3. Pretty stupid .went into bootloop. Had nandroid backup tried to restore but couldn't.
Flashed another rom mk2 from cwm. again bootloop .took the odin route and flashed stock deodesk mj7 by Djembey from this thread.
http://forum.xda-developers.com/show....php?t=2461929
Failed again. Then downloaded latest mk2 from sammobile website. The same error (invalid ext4 img) in short failed on all ccounts. Have run out of options. The last thing in mind is to wait for some new bootloader after mk2 which might rescue me as mentioned in this thread that new bootloaders might help... Any guidance will be appreciated. Thanks

@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went

doclucas said:
@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went
Click to expand...
Click to collapse
Why did you suggest X-Note but not another ROM?

3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.

doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always
replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.

doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Nope, I didnt mean what is the best rom to use.
The problem is that how to bypass the bootloop issue.

pyarajaani said:
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.
Click to expand...
Click to collapse
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?

doclucas said:
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?
Click to expand...
Click to collapse
yes...I did that n installed X note rom from cwm. BUT I suspect that cwm is not fully functional. Why I m saying this is that I have a nandroid backup of bobcat mj7 rom...which cwm isn't able to detect even. ..nevertheless. .cwm is installed.

1) Which CWM version do you have installed?
2) Did you do a full wipe/factory-reset?
3) Did you try also advanced formatting (of system partition together with the full wipe) and then install the ROM?
4) Did you try all the above with the latest TWRP recovery instead of CWM?
http://forum.xda-developers.com/showthread.php?t=2467255

Try to flash this file by cwm first and then flash any rom after you want
https://www.dropbox.com/s/bibytggk2m8npw8/Brick_Loop_FIX_Fix.zip
Sent from my SM-N9005 using Tapatalk

[Q] Problem with the Kit Kat 4.4.4 updating

Hi !
Pls help with S3 neo 4.4.4.
I try few roms from Samsung but no success
first time I download with OTA update but when phone is get update ... I get odin screen with DOWNLOADING... with the message " could not do normal boot"
then I put back 4.3 with odin official update and the pone is working...
then I try few roms 4.4.4. official (India Kazakhstan Hon Kong) but no success always the same (odin) screen after update.
What I do wrong ?
now running 4.3 :crying:
GT-I9300I
s3ve3gub
I9300IUBUAND1
MSM8228

I have the same problem
I have the same problem. my phone is identical to yours April 2014 I9300IUBUAND1 I9300IUUBAND1 I9300IUBUAND1 4.3 Product Code: TTT--- I hope someone has a solution for our problem

Pls need solution or tip how to update my GT-I9300I Neo+ to Kitkat 4.4.4 ......

Here is my problem...I rooted my s3 neo gti9300i using towelroot and it worked ...I also didn't flash any custom recovery.. I bought my phone in june...its my first android phone...but nw I can't update as my device status is "MODIFIED"...I installed xposed and changed my device status to "OFFICIAL" using wanam xposed...I got the latest update 4.4.4...I downloaded but when it booted its self and started installing an "ERROR"...so I removed xposed and unrooted my phone using supersu...then again tryied nw ..not possible to get update server say that my system is modified...what to do nw...pls help...its my 1st phone..?

I believe it is in need of repartition. Some partition from the Rom you're trying to install exceeds current partition size.
So either find the correct update for your region (which I strongly advise) Either try it by ticking repartition( do it your own risk) which is not advisable as you might end up bricking the phone.
You need a pit file for repartition.

mariosraptor said:
I believe it is in need of repartition. Some partition from the Rom you're trying to install exceeds current partition size.
So either find the correct update for your region (which I strongly advise) Either try it by ticking repartition( do it your own risk) which is not advisable as you might end up bricking the phone.
You need a pit file for repartition.
Click to expand...
Click to collapse
whether they can pit file for Europe and rom for Kazakhstan because I found the pit to Europe. my phone is I9300IUBUAND1 I9300IUUBAND1 I9300IUBUAND1 4.3 Product Code: TTT Trinidad and Tobago.

Any solution for mine...

My phone is also S3 Neo + but is plus version with 1.4 CPU ... it is the first version for china jan 2014 .... all updates 4.3 is OK for him from Samsung firmwares .... but i cant update for 4.4 .... i always after any update get the android screen and after that Odin screen with downloading and message with cant do normal boot .... and cant go to recovery only flash back with 4.3....
Its my phone soft bricked ? I try also wit pit file and firmware flash but nothing.... the same situation ....
Pls help

nattila said:
My phone is also S3 Neo + but is plus version with 1.4 CPU ... it is the first version for china jan 2014 .... all updates 4.3 is OK for him from Samsung firmwares .... but i cant update for 4.4 .... i always after any update get the android screen and after that Odin screen with downloading and message with cant do normal boot .... and cant go to recovery only flash back with 4.3....
Its my phone soft bricked ? I try also wit pit file and firmware flash but nothing.... the same situation ....
Pls help
Click to expand...
Click to collapse
The best solution for you is to initialize your phone using Kies 3... However, this requires a running phone, not a bootlooping one... Use a firmware that works with you first!
Install it, connect your phone and do the initialization from the firmware menu... This should install the latest available firmware to your device while cleaning up the whole mess....
Good luck

moro89 said:
The best solution for you is to initialize your phone using Kies 3... However, this requires a running phone, not a bootlooping one... Use a firmware that works with you first!
Install it, connect your phone and do the initialization from the firmware menu... This should install the latest available firmware to your device while cleaning up the whole mess....
Good luck
Click to expand...
Click to collapse
The fanny thing is that .... I do have a functional phone with official Samsung firmware but its 4.3 .... I flashed almost every 4.3 on him all is working .... also try to root ..... flash recovery .... its all OK on 4.3
But when I come to 4.4.4 official firmware .... its refuse to boot ....
I try OTA update .... try KIES ... ODIN .....
always the same scenario .... after flash phone restarted ... I get the first screen with Samsung logo ... after its boot to odin with red message cant do normal boot... and don't let me to recovery (volume up+home) only to download (volume down+home)
Its weird

nattila said:
The fanny thing is that .... I do have a functional phone with official Samsung firmware but its 4.3 .... I flashed almost every 4.3 on him all is working .... also try to root ..... flash recovery .... its all OK on 4.3
But when I come to 4.4.4 official firmware .... its refuse to boot ....
I try OTA update .... try KIES ... ODIN .....
always the same scenario .... after flash phone restarted ... I get the first screen with Samsung logo ... after its boot to odin with red message cant do normal boot... and don't let me to recovery (volume up+home) only to download (volume down+home)
Its weird
Click to expand...
Click to collapse
Send it to Samsung... They definitely know how to put Kitkat on your device!

Are u sure you are downloading right firmware for your device since there are few variants around here, and mayb kitkat is not released for your variant ...
As i can see on samsung update page there is only one 4.4.4 for your device variant (s3ve3gUB)
http://samsung-updates.com/device/?id=GT-I9300I
It is : I9300IUBUBNJ1 ,so try flashing that one

Rox said:
Are u sure you are downloading right firmware for your device since there are few variants around here, and mayb kitkat is not released for your variant ...
As i can see on samsung update page there is only one 4.4.4 for your device variant (s3ve3gUB)
http://samsung-updates.com/device/?id=GT-I9300I
It is : I9300IUBUBNJ1 ,so try flashing that one
Click to expand...
Click to collapse
Do you mean.... this one???
http://www.sammobile.com/firmwares/download/37860/I9300IUBUBNJ1_I9300IUUBBNJ1_TTT.zip/

I try few times to flash I9300IUBUBNJ1 thru Odin .... OTA ... KIES .... no success ..... I have a weird phone ....
thanks for a tips

And yes ,,,,,,,my phone is UB variant .... maybe Samsung is not released firmware for my phone .....

I just look under hub
MODEL: GT-I9300I UD
SSN: I9300IGSMH
FCC: A3LGTI9300I

Still no luck with update to 4.4 ... ......

moro89 said:
The best solution for you is to initialize your phone using Kies 3... However, this requires a running phone, not a bootlooping one... Use a firmware that works with you first!
Install it, connect your phone and do the initialization from the firmware menu... This should install the latest available firmware to your device while cleaning up the whole mess....
Good luck
Click to expand...
Click to collapse
i cant install a firmware because , look at the photo , i tried 3 different Firmwares help !!!!!

nattila said:
I just look under hub
MODEL: GT-I9300I UD
SSN: I9300IGSMH
FCC: A3LGTI9300I
Click to expand...
Click to collapse
I am working on the same exact phone and I have having a hard time finding the right firmware for this phone.
It is stuck on recovery. I get a could not do normal boot and back to recovery. So I was planning on flashing a stock rom to get it out of recovery. Every how to page talks about going into setting to find your firmware version. This makes it hard when you cannot get into phone settings.
If you ever find the right Rom for this type of phone Please reply. Every rom site I have visited does not have the correct one.

This is most probably a hardware issue. Something on the main board got fried or some other glitch took place in a hardware component. Send it to Samsung for a repair or better buy a new phone.
---------- Post added at 12:25 PM ---------- Previous post was at 12:23 PM ----------
Another idea is to use Smart Switch. You don't need a running phone this time. Just choose the firmware initialization option and enter your device model and serial number, and you're good to go. If this didn't work, send it to Samsung or give it a goodbye kiss.

[Q] Problems with ROM install

Hello I would like to ask you... I have SM-N9005 (baseband) - N9005XXUBMH9 and I cant find any ROM for it, can you tell me whats the problem? Do I have any kind of testing model or what? Thank you for your answers... I really would like to install Lollipop on it, but I am afraid, because of my baseband... Thanks.

Baseband is the Modem its not the firmware .
Development is full of N9005 custom roms as is sammobile with stock roms .

JJEgan said:
Baseband is the Modem its not the firmware .
Development is full of N9005 custom roms as is sammobile with stock roms .
Click to expand...
Click to collapse
Ahh sorry, so do you think that I can install any firmware on that XXUBMH9?, because i didnt find any on sammobile. I have found that XXUBMH9 was something like pre-release version or something like that...

Download and run Phone Info from play store .

JJEgan said:
Download and run Phone Info from play store .
Click to expand...
Click to collapse
And what do you need from this app ?

List everything in these tabs: General, CSC Code, Firmware
(actually, don't need all, but simpler to just tell you that than each specific thing). Easier still, take a snapshot of your screen and post them on here.
General will tell us your exact phone model, and CSC will let us know which country specific firmware you need. Firmware will let us know which version you have, so you don't downgrade bootloader and mess things up.

Many thanks to everyone who contributed

Darkwolfec said:
Hello I would like to ask you... I have SM-N9005 (baseband) - N9005XXUBMH9 and I cant find any ROM for it, can you tell me whats the problem? Do I have any kind of testing model or what? Thank you for your answers... I really would like to install Lollipop on it, but I am afraid, because of my baseband... Thanks.
Click to expand...
Click to collapse
A word of caution. It may not be so but your confusion about baseband says you don't know much about ROM's, flashing and software components. I'd suggest have a read of the stickies (at top of each section such as Android Development) and learn what gives. You need to know the difference between Recovery and Download modes among other things.
Chances are you will want to root you phone so you can play more, but if all you want is LP, you can DL the Stock firmware for your phone (which is why the guys want the details from Phone INFO) and then flash it using Odin - a program you run on your PC that runs the firmware onto your phone.

N9005XXUBMH9
Feedback on that is that it was Jelly Bean Test firmware .In which case it may not be a genuine Note 3 but a sample .
SM-N9005: Android 4.3 Jellybean
(Current test firmware: N9005XXEBMH9/N9005OXABMH9/N9005XXUBMH9)

SAMSUNG Blocked wifi on kitkat 4.4.2 stock roms???

Hello 2 all !
i use the stock roms for my S4 ,most offen i use kitkat 4.4.2 versions.Today i reflash my phone and i get this stupid msg on notification : '
""Security notice' stating - 'your device's security has blocked an action that is not permitted. No further action is required'"" .. and this one is blocking the wifi to off, and i cant get it to ON the button rest grey after rom booted. .
I reflash many time with diffrent roms versions (only kk 4 4 2 from sammobile) the probl is the same on every rom i flash !!
I think is releate with KNOX crap but im not sure ,The only way to have wifi on kitkat again is to flash another kernel after i flash the stock rom !!! I really need help with that because i need some stock version for daily use.
I try kies ....same results.... i try odin..same results ...wifi dont start ! I delete wpa_supplicant from data/misc/wifi ..nothing.... no wifi ! Most of all when i open kies to reflash new firmware it say kies NO SUPPORT for youre model any more !! whtf???? i use to reflash with kies many time for fix trubles,and now...no suppot this model ??
I so many users with this problem but NO FIX for it !
Pls... if anyone can fix this or post an solution, i really apreciate for it .
My phone is S4 GT-I9515 and i use the stock rom 4.4.2 - I9515XXU1AND3_I9515YJV1ANE1_XSG
Pls .....any help ??

Here's the stock i9515 firmware: http://www.sammobile.com/firmwares/database/GT-I9515/
Maybe try a stock 5.01 firmware?

audit13 said:
Here's the stock i9515 firmware: http://www.sammobile.com/firmwares/database/GT-I9515/
Maybe try a stock 5.01 firmware?
Click to expand...
Click to collapse
You miss my point ..is stock firmware kitkat who has this problem, i flash 4.4.2.KK .....5.01 LP ,all stock roms!,the wifi is still stuck on grey button and when i try to activate it come up that notification pop with : Your phones security has blocked an action that is not permitted. No further action is required.! ...

jean_pulbere said:
Hello 2 all !
i use the stock roms for my S4 ,most offen i use kitkat 4.4.2 versions.Today i reflash my phone and i get this stupid msg on notification : '
""Security notice' stating - 'your device's security has blocked an action that is not permitted. No further action is required'"" .. and this one is blocking the wifi to off, and i cant get it to ON the button rest grey after rom booted. .
I reflash many time with diffrent roms versions (only kk 4 4 2 from sammobile) the probl is the same on every rom i flash !!
I think is releate with KNOX crap but im not sure ,The only way to have wifi on kitkat again is to flash another kernel after i flash the stock rom !!! I really need help with that because i need some stock version for daily use.
I try kies ....same results.... i try odin..same results ...wifi dont start ! I delete wpa_supplicant from data/misc/wifi ..nothing.... no wifi ! Most of all when i open kies to reflash new firmware it say kies NO SUPPORT for youre model any more !! whtf???? i use to reflash with kies many time for fix trubles,and now...no suppot this model ??
I so many users with this problem but NO FIX for it !
Pls... if anyone can fix this or post an solution, i really apreciate for it .
My phone is S4 GT-I9515 and i use the stock rom 4.4.2 - I9515XXU1AND3_I9515YJV1ANE1_XSG
Pls .....any help ??
Click to expand...
Click to collapse
jean_pulbere said:
You miss my point ..is stock firmware kitkat who has this problem, i flash 4.4.2.KK .....5.01 LP ,all stock roms!,the wifi is still stuck on grey button and when i try to activate it come up that notification pop with : Your phones security has blocked an action that is not permitted. No further action is required.! ...
Click to expand...
Click to collapse
I do not think I missed the point. Your original post only mentions KK but not LP which is why I suggested LP. The last line of your original post even states the ROM in use on the phone.

audit13 said:
I do not think I missed the point. Your original post only mentions KK but not LP which is why I suggested LP. The last line of your original post even states the ROM in use on the phone.
Click to expand...
Click to collapse
Ok ,my engl is not so good so maibe i im not make my self clear .. I use the rom posted in the last line ,for daily use till now... today i wanted to relflash the same rom and surpeise ,it comme up with that problem . I reflash many time bot not working again...so i decide to reflash diffrent version of stocks rom....Kitkat and Lolipop... and with no succes because that erorre is still present and wifi is still stuck on any rom i flash! I

No worries. Thank you for clarifying the situation. Your English is fine.
I don't know which version of Odin you are using but I always use Odin 3.07 because I have never had a problem with 3.07.
Do you have a pit file for your phone? Flashing the pit file with the stock ROM in Odin might solve the problem.

jean_pulbere said:
Ok ,my engl is not so good so maibe i im not make my self clear .. I use the rom posted in the last line ,for daily use till now... today i wanted to relflash the same rom and surpeise ,it comme up with that problem . I reflash many time bot not working again...so i decide to reflash diffrent version of stocks rom....Kitkat and Lolipop... and with no succes because that erorre is still present and wifi is still stuck on any rom i flash! I
Click to expand...
Click to collapse
This is coz KNOX blocked the wifi access.
SOLUTION:
1. Flash via ODIN the latest android 4.4.2 version to your device: THIS ONE.
2. Root it via ODIN with CF-Autoroot.
3. Using Root Explorer (for example) delete all the KNOX entries: GUIDE.
4. Reboot your device. You should have wifi now. Install TRIANGLE AWAY and reset your flash counter to complete the job. Done.

Joku1981 said:
This is coz KNOX blocked the wifi access.
SOLUTION:
1. Flash via ODIN the latest android 4.4.2 version to your device: THIS ONE.
2. Root it via ODIN with CF-Autoroot.
3. Using Root Explorer (for example) delete all the KNOX entries: GUIDE.
4. Reboot your device. You should have wifi now. Install TRIANGLE AWAY and reset your flash counter to complete the job. Done.
Click to expand...
Click to collapse
I really apreciate your help,lets try to see what happen" )) In this moment the only way to use wifi is because i flash other kernel (Googy_max3 patched for my phone model) so...let"s try and i ll commeback with news,thx very much again!

Joku1981 said:
This is coz KNOX blocked the wifi access.
SOLUTION:
1. Flash via ODIN the latest android 4.4.2 version to your device: THIS ONE.
2. Root it via ODIN with CF-Autoroot.
3. Using Root Explorer (for example) delete all the KNOX entries: GUIDE.
4. Reboot your device. You should have wifi now. Install TRIANGLE AWAY and reset your flash counter to complete the job. Done.
Click to expand...
Click to collapse
And the answer is ......... NO ((( Same problem same notification NO WIFI ,the button is still grey (( it s start to make it me crazy this crap ..grrrr... is there any way to get ONLY the kernel ,stock kernel for my firmware ??? maibe if i flash separate will fix it ...i was think about that because if if flash the googy_max3 patched it works ...so may be an kernel probl ??? ((

jean_pulbere said:
And the answer is ......... NO ((( Same problem same notification NO WIFI ,the button is still grey (( it s start to make it me crazy this crap ..grrrr... is there any way to get ONLY the kernel ,stock kernel for my firmware ??? maibe if i flash separate will fix it ...i was think about that because if if flash the googy_max3 patched it works ...so may be an kernel probl ??? ((
Click to expand...
Click to collapse
Install this APP and add screenshots pls.

You mentioned that you tried kies in your post but Kies didn't support your phone. It could be that the updated ROM is supported in Samsung's smart switch.
http://www.samsung.com/us/smart-switch/

audit13 said:
No worries. Thank you for clarifying the situation. Your English is fine.
I don't know which version of Odin you are using but I always use Odin 3.07 because I have never had a problem with 3.07.
Do you have a pit file for your phone? Flashing the pit file with the stock ROM in Odin might solve the problem.
Click to expand...
Click to collapse
i try flashing with all odin version included 3.07 but is not odin probl...is something in my phone that bloked wifi in kernel or something..knox..security polices i dont have any clue how to fix it...i flash phone from years..many models..but never happen like this...i dont hv any explication. kies not support my phone model but till now it was supported.. i try it with the other soft recomandate from kies and surprise..not support for my model !! im really f..k up...pfff... what du you say about pit file??? i dont hv that file..where to search and how to use??

Joku1981 said:
Install this APP and add screenshots pls.
Click to expand...
Click to collapse
i know the apk for phone info...what do you want to see ?? i make the screenshot at ..what??

audit13 said:
You mentioned that you tried kies in your post but Kies didn't support your phone. It could be that the updated ROM is supported in Samsung's smart switch.
http://www.samsung.com/us/smart-switch/
Click to expand...
Click to collapse
i told you ..till now i repair my stock with kies or smart swich...many time i do that.so ..today when i instaled kies and open..surpriseeee..my model not suported!! i install smart swich..open...surpriseee..your device not supported!!..whtf !??

incredibile...i extracted modem.bin and wifi modem from stock firmware..flashed ...no success again....im in a point break...no clue what to do. i bet is something related to security ..but not sure..because of notificatiin mesage...security block bla bla...... triangleaway was reseting my flash counter knox disable delete..rooted...all works but not the damn wifi...samsung i hate you!! (

jean_pulbere said:
incredibile...i extracted modem.bin and wifi modem from stock firmware..flashed ...no success again....im in a point break...no clue what to do. i bet is something related to security ..but not sure..because of notificatiin mesage...security block bla bla...... triangleaway was reseting my flash counter knox disable delete..rooted...all works but not the damn wifi...samsung i hate you!! (
Click to expand...
Click to collapse
Try a custom rom.

Lennyz1988 said:
Try a custom rom.
Click to expand...
Click to collapse
Finnaly the probl is fixed !!!!! pffffff... i flash with odin 10.7 the lolipop stock rom 5.0 ,after full instal, go to recovery stock and wipe factory reset wipe chache ,reboot download mode and flash again 4.4.2 kit kat,roted instal twrp and ..gere you go all function back to normal ! ))) pfffhiuuu ... thx for helping me guys ! Btw ...i still search for stock 4.4.2 kernel ... pls post link if you know !

Dead Phone :/

I have samsung Galaxy S4 ( I9500 )
i have installed cm-12.1-20160918-NIGHTLY-i9500.zip With philz_touch_6.48.4-i9500 and it worked Well but there was a problem i call I can't here or the other here me unless open speaker and close it again it works well .. then i got OTA update i started to download it with CMUpdater and download speed wasn't well i canceled the download and Downloaded ( cm-12.1-20161002-NIGHTLY-i9500.zip ) manually and Flash it with the same Recovery after this flash process my phone started normally but when i Lock the screen and try to wake it up again it won't wake up but the device still working :/ .. and other problem is Back, menu Keys didn't work any more After this flash .. and Recovery Won't Boot :/ tried to change ( CWM - Phliz ) it and nothing happen .. TWRP is the only recovery Work But other problem still .. and i flash Stock Rom With ODIN and Problems Still i flash Kit kat and Lolipop .. nothing help :"3 ..
any help ??

ahmed44251 said:
I have samsung Galaxy S4 ( I9500 )
i have installed cm-12.1-20160918-NIGHTLY-i9500.zip With philz_touch_6.48.4-i9500 and it worked Well but there was a problem i call I can't here or the other here me unless open speaker and close it again it works well .. then i got OTA update i started to download it with CMUpdater and download speed wasn't well i canceled the download and Downloaded ( cm-12.1-20161002-NIGHTLY-i9500.zip ) manually and Flash it with the same Recovery after this flash process my phone started normally but when i Lock the screen and try to wake it up again it won't wake up but the device still working :/ .. and other problem is Back, menu Keys didn't work any more After this flash .. and Recovery Won't Boot :/ tried to change ( CWM - Phliz ) it and nothing happen .. TWRP is the only recovery Work But other problem still .. and i flash Stock Rom With ODIN and Problems Still i flash Kit kat and Lolipop .. nothing help :"3 ..
any help ??
Click to expand...
Click to collapse
Get the i9500 lollipop firmware from the sammobile and flash it via odin. Please get the firmware which is the same or newer then your bootloader.

sway8966 said:
Get the i9500 lollipop firmware from the sammobile and flash it via odin. Please get the firmware which is the same or newer then your bootloader.
Click to expand...
Click to collapse
i flashed it several times before and worked well .. but now i don't know what's happening

sway8966 said:
Get the i9500 lollipop firmware from the sammobile and flash it via odin. Please get the firmware which is the same or newer then your bootloader.
Click to expand...
Click to collapse
tell me how to know My Device Bootloader

ahmed44251 said:
tell me how to know My Device Bootloader
Click to expand...
Click to collapse
Just install phone info app from play store

Arpit Aggarwal said:
Just install phone info app from play store
Click to expand...
Click to collapse
it said the same bootloader in version i flash .. can i know the original or some thing like this ?

ahmed44251 said:
it said the same bootloader in version i flash .. can i know the original or some thing like this ?
Click to expand...
Click to collapse
When I was in kitkat I did not check the bootloader version and flashed older version which tripped the knox counter. That was why I I asked you to check the bootloader .
If you flashed the correct firmware via odin, believe that the firmware download has no problem, and flashing odin did not give any errors and yet you still have some problem, then your problem likely to be a hardware failure rather than software.
check the checksum of the downloaded firmware, flashing from different usb port or different computer, flashing with different version of odin, etc.. are the tries you can do.

sway8966 said:
When I was in kitkat I did not check the bootloader version and flashed older version which tripped the knox counter. That was why I I asked you to check the bootloader .
If you flashed the correct firmware via odin, believe that the firmware download has no problem, and flashing odin did not give any errors and yet you still have some problem, then your problem likely to be a hardware failure rather than software.
check the checksum of the downloaded firmware, flashing from different usb port or different computer, flashing with different version of odin, etc.. are the tries you can do.
Click to expand...
Click to collapse
i'll try
i downloaded Jelly bean, Kitkat and i'll flash each

Nothing Worked it still same things

ahmed44251 said:
i'll try
i downloaded Jelly bean, Kitkat and i'll flash each
Click to expand...
Click to collapse
Could you tell me your bootloader version of your phone and also give me the link of the lollipop firmware that you downloaded from the sammobile.
if it is possible could you tell me what message you have when you flash that lollipop firmware via odin.
If your phone is on lollipop, flashing kit-kat or jelly beam wont help and it could harm your phone.

sway8966 said:
Could you tell me your bootloader version of your phone and also give me the link of the lollipop firmware that you downloaded from the sammobile.
if it is possible could you tell me what message you have when you flash that lollipop firmware via odin.
If your phone is on lollipop, flashing kit-kat or jelly beam wont help and it could harm your phone.
Click to expand...
Click to collapse
bootloader Version : I9500XXUHPH3
Frimware link : http://www.sammobile.com/firmwares/download/93065/I9500XXUHPH3_I9500SERHPH1_SER/
Odin didn't Gave me any Error Messages .. it work Like charm
Kitkat Solve Original Recovery Problem .. and two other problems still ...but lollipop all 3 still

Could 4Files Firmware Help ??

ahmed44251 said:
bootloader Version : I9500XXUHPH3
Frimware link : http://www.sammobile.com/firmwares/download/93065/I9500XXUHPH3_I9500SERHPH1_SER/
Odin didn't Gave me any Error Messages .. it work Like charm
Kitkat Solve Original Recovery Problem .. and two other problems still ...but lollipop all 3 still
Click to expand...
Click to collapse
Well ph1/ph3 is the latest firmware for i9500 . It was released a week ago. It is for Russia. I am using the firmware released in 2015. Try to download it again and flash it.

4 files Frimware and I9500XXUHPH3 Didn't help :/
this maybe Hardware problem (board .. )