Anyone have a good link for a S433 ROW rom, in a TWRP backup ??
I need one quaickly and cant find an unmodified or mostly unmodded one.. This thread
http://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537
Appears to promise one, but having DLed a few roms from that none seem TWRP backups.
Related
Can someone please post here stock recovery.img for OPT im now on TWRP but i want to install H2OS OTA normally.
Thank you so much
You may have chosen to keep the twrp recovery on your device from beeing overwritten by the stock recovery. This is done in twrp by renameing the "/bin/recovery.sh" (afaik).
Before installation OTA update checks for all checksums of files it will patch. So you will not only need the stock recover but at least to replace the recovery.sh with the original one.
Much easier way is to flash 2.0.2 full (not the OTA!), flash 2.1 OTA, flash SU and reboot in one session from twrp . I have done this and it worked without a problem.
Just make sure your battery is fully charged before
I'm getting an updated binary error. Started getting it in TWRP after flashing a custom kernel. Could you post your stock recovery? Or the stock kernel? (preferably the latter I suppose)
I've tried digging into the full 2.0.1 and 2.1 ROMs to find them, but I can't track them down...
Yes,i need the stock recovery
Well I need stock recovery because of hydrogen OS hope someone have it..
All you need is recovery paparapapa ahahahah
I managed somehow to have back stock recovery
When i flashed TWRP and then Gapps for Hydrogen OS it asked me to stop stock recovery to flash or something so i press dont stop, and voila im back on stock recovery
OnePlus 2 stock recovery -> http://forum.xda-developers.com/oneplus-2/general/oneplus-2-stock-recovery-t3217848
Hi there,
my 802 is running on TWRP after I updated to the latest stock ROM (30D Europe Open). Unfortunately due to problems mentioned in another thread I cannot install a custom ROM currently. Does anyone here have a mirror for me where I can download a TWRP backup of the stock ROM?
Thank you in advance
If you can't install a custom rom, what makes you think you can install a stock? It's pretty easy.
Very helpful... I flashed the latest KDZ on the G2, rooted it and installed TWRP 3.0.2.0, so far so good (believe it or not I flashed a dozen other android devices before). However when I try to install a Marshmallow ROM it gives me Error 7, so that means that getprop.device or so doesnt bring the correct value up. Now when I tried to switch to an older TWRP which is supposed to not have that Error 7 issue (2.7.0.0) I get an error saying I am missing the Loki files in the tmp folder. Now I do not know how to get around the Error 7 (the fix that is mentioned on here didnt work for me, brings up Error 6 instead) I would like to return to a stock backup.
How about giving me actual advice or leaving and letting other people help?
Edit: Booted in Download Mode and flashed v30D KDZ with the 2014 LG Flashtool. Works with Stock ROM for now
Hi to all,
had root this device on 6.0.1 with TWRP. Now I needed a full reset due to a Bluetooth problem to check if its root/software related. BUT on my mistake I erased EVERYTHING through TWRP (Dalvik/ART Cahe,System,Data,Internal Storage,Cache, Micro SD, Android Secure, USB-OTG)
Tried to install custom rom Aospextended but I don't know the how to and I am lost in forums.. the phone doesn't boot... after zip file installation the screen fades to somewhat yellowish like LCD problem... I can still access TWRP..
p.s. I am an iPhone guy and just tried to fix this for my son... hope for your understanding for probably asking something very common..!
ANY HELP WOULD BE greatly appreciated even to get back to stock rom
Many thanks in advance!
gsp1 said:
Hi to all,
had root this device on 6.0.1 with TWRP. Now I needed a full reset due to a Bluetooth problem to check if its root/software related. BUT on my mistake I erased EVERYTHING through TWRP (Dalvik/ART Cahe,System,Data,Internal Storage,Cache, Micro SD, Android Secure, USB-OTG)
Tried to install custom rom Aospextended but I don't know the how to and I am lost in forums.. the phone doesn't boot... after zip file installation the screen fades to somewhat yellowish like LCD problem... I can still access TWRP..
p.s. I am an iPhone guy and just tried to fix this for my son... hope for your understanding for probably asking something very common..!
ANY HELP WOULD BE greatly appreciated even to get back to stock rom
Many thanks in advance!
Click to expand...
Click to collapse
Install a ROM with marshmellow firmware please don't post in this thread of j5 forum
hi, already posted by mistake at firmware section admins can delete that please...
having TOTALLY erased my SM-J500F/DS with TWRP I cannot put back anything...
ANY help on stock recovery, custom rom or anything would be greatly appreciated... I tried already one custom rom but I am not sure... just install the zip file? This procedure doesn't boot, restarts gets the logo and after this the screed gets yellowish like damaged!!!... again I have TWRP access thankfully...
please any help?
gsp1 said:
hi, already posted by mistake at firmware section admins can delete that please...
having TOTALLY erased my SM-J500F/DS with TWRP I cannot put back anything...
ANY help on stock recovery, custom rom or anything would be greatly appreciated... I tried already one custom rom but I am not sure... just install the zip file? This procedure doesn't boot, restarts gets the logo and after this the screed gets yellowish like damaged!!!... again I have TWRP access thankfully...
please any help?
Click to expand...
Click to collapse
You must go to section Samsung j5 2015 you will find all you need, since restoring to stock, rooting, installing the correct TWRP for your device....and more.
You NEED to READ because too much information for one post, but this is the correct place for you.
Pay attention the correct files TWRP for 601 because there are TWRP for lollipop devices, and when choosing ROMs you MUST downgrade your firmware to Lollipop, that's the reason for artifacts and greenish screen because of incompatibility of TWRP and there are ROMs that you can install with twrp601, others need booltloader and twrp lollipop. Hope you are nota blind anymore
Taivotat2 said:
You must go to section Samsung j5 2015 you will find all you need, since restoring to stock, rooting, installing the correct TWRP for your device....and more.
You NEED to READ because too much information for one post, but this is the correct place for you.
Click to expand...
Click to collapse
Many thanks! I will do it!
gsp1 said:
Hi to all,
had root this device on 6.0.1 with TWRP. Now I needed a full reset due to a Bluetooth problem to check if its root/software related. BUT on my mistake I erased EVERYTHING through TWRP (Dalvik/ART Cahe,System,Data,Internal Storage,Cache, Micro SD, Android Secure, USB-OTG)
Tried to install custom rom Aospextended but I don't know the how to and I am lost in forums.. the phone doesn't boot... after zip file installation the screen fades to somewhat yellowish like LCD problem... I can still access TWRP..
p.s. I am an iPhone guy and just tried to fix this for my son... hope for your understanding for probably asking something very common..!
ANY HELP WOULD BE greatly appreciated even to get back to stock rom
Many thanks in advance!
Click to expand...
Click to collapse
I had the same problem when flashing Lineage 14.1 on my phone (J500M), screen fadding with a green-yellowish color and no boot. That happened because I was trying to flash the custon Rom with the wrong base. I was using 6.0 before flashing and Lineage requires you start from 5.1.
All I need to do was search for my device on sammobile.com , get the right stock firmware and use Odin to flash the rom on my device. From there I was able to flash TWRP again and install Lineage correctly.
gsp1 said:
Hi to all,
had root this device on 6.0.1 with TWRP. Now I needed a full reset due to a Bluetooth problem to check if its root/software related. BUT on my mistake I erased EVERYTHING through TWRP (Dalvik/ART Cahe,System,Data,Internal Storage,Cache, Micro SD, Android Secure, USB-OTG)
Tried to install custom rom Aospextended but I don't know the how to and I am lost in forums.. the phone doesn't boot... after zip file installation the screen fades to somewhat yellowish like LCD problem... I can still access TWRP..
p.s. I am an iPhone guy and just tried to fix this for my son... hope for your understanding for probably asking something very common..!
ANY HELP WOULD BE greatly appreciated even to get back to stock rom
Many thanks in advance!
Click to expand...
Click to collapse
You have two solutions, you can restore your phone STOCK ROM with Samsung Smart Switch or downgrade to Lollypop firmware and install any custom rom trough TWRP.
Restore to STOCK:
Use Samsung Smart Switch, see howto here
Downgrade to Lollipop:
Install only Bootloader/Modem [6.0.1/5.1.1]BOOTLOADER AND MODEM FOR J500xx [Downgrade more easy] (Collection)
Downgrade to Lollypop (full ROM) (Tutorial) Upgrade J5 (2015) to 6.0 and Downgrade to 5.1.1 + Rooting
Also take a look at [GALAXY J5] Basic informations | Guides | Tips and Tricks | ROMS & KERNELS
DDkin said:
I had the same problem when flashing Lineage 14.1 on my phone (J500M), screen fadding with a green-yellowish color and no boot. That happened because I was trying to flash the custon Rom with the wrong base. I was using 6.0 before flashing and Lineage requires you start from 5.1.
All I need to do was search for my device on sammobile.com , get the right stock firmware and use Odin to flash the rom on my device. From there I was able to flash TWRP again and install Lineage correctly.
Click to expand...
Click to collapse
American_Jesus said:
You have two solutions, you can restore your phone STOCK ROM with Samsung Smart Switch or downgrade to Lollypop firmware and install any custom rom trough TWRP.
Restore to STOCK:
Use Samsung Smart Switch, see howto here
Downgrade to Lollipop:
Install only Bootloader/Modem [6.0.1/5.1.1]BOOTLOADER AND MODEM FOR J500xx [Downgrade more easy] (Collection)
Downgrade to Lollypop (full ROM) (Tutorial) Upgrade J5 (2015) to 6.0 and Downgrade to 5.1.1 + Rooting
Also take a look at [GALAXY J5] Basic informations | Guides | Tips and Tricks | ROMS & KERNELS
Click to expand...
Click to collapse
MANY THANKS to both of you guys!
Bro just install the official rom ,u can download it from the official site and flash with odin ..
x722 QFIL is now available for hard bricks. See x722 Development Forum or scroll down for the link.
Although this thread is stickied in the Question & Answers sub-forum, I see that people are still ending up with bricked phones because they only visit this section of the forum. Let's hope this thread puts an end to accidental bricks once and for all (and let's hope that the future brings a solution to these bricked x722s).
Don't worry; custom 26s ROMs are fine to flash through TWRP. Vendor ROMs are fine to flash through TWRP.
Just don't flash the first stock 26s ROM you find online. Like the 26s ROM from Needrom, or a 26s ROM from a Chinese forum.
WARNING! There was a report that @STEVE_MARS's Genesys 26s ROM bricked a phone. See this post for reference. I urge you to stay away from that ROM and other eUI 26s based ROMs. You never know if your device will get bricked
Below lies the same info as is in the Q&A forum sticky.
Planning on flashing a custom ROM on your LeEco Pro3 Elite x722? Planning on flashing TWRP on your LeEco Pro3 Elite x722?
READ THIS ENTIRE POST FIRST, or you may accidentally brick your device
DO NOT flash official/stock 26s through TWRP.
DO NOT UPDATE TO official/stock 26s if you want to flash TWRP on your x722.
Your x722 will get permanently bricked if you install stock 26s (or firmware WIXCNFN5802005041S) through TWRP. That's because stock 26s permanently locks down the bootloader. At that point, only fastboot is available. Do not attempt this or you will end up with a permanently bricked device.
EDIT: As of September 24, 2018, @F.J.V has posted the x722's QFIL. Hooray! https://forum.xda-developers.com/le...ides-development--and-mods/qfil-x722-t3846553
HELP! I'm on 26s! I received my x722 and it's stuck on 26s! HOW DO I GET RID OF IT?
That's simple. If your x722 is on stock 26s, you only need to flash Batyan's 01D developer ROM (20s) through the stock LeEco recovery. Click for the download and instructions. Follow the instructions and you will be able to safely unlock the bootloader and flash TWRP.
However, most x722s are on vendor ROMs. If your phone is on a 26s vendor ROM, it's safe to flash. Look at the chart below to figure out if you've got stock 26s or vendor 26s. If you're not sure about what you have, post here and we'll try to help. If you don't want to take any chances, you can always downgrade to 01D first.
@dakok has created a handy chart for the different vendor ROMs here.
I just got my x722 today and I want to unlock the bootloader, root it, and flash TWRP. How do I do that?
Here you go: [GUIDE][X722] Unlock Bootloader + TWRP + ROOT
What ROMs are available for the x722? Will x720 ROMs work on the x722?
Some x720 ROMs are indeed compatible with the x722, but need to be ported to the x722, therefore not all x720 ROMs work on the x722. If the ROM is not specifically for your device (i.e. labelled as being for the x722), don't flash it. For example, MIUI is not available for the x722 because no one has ported it from the x720 to the x722. If you flash, say, MIUI 9 for LEX720 on your x722, you'll end up with a soft brick, most likely.
Remember to make a Nandroid backup of your eUI ROM before flashing any other ROM!
Downgrading to the 01D ROM won't harm your phone in any way, but this ROM's performance isn't the best compared to normal 20s or 26s vendor (shop) ROMs. It's a developer's ROM, after all. So if you ever want to return to eUI, you'll want to make a backup of your vendor/shop eUI ROM via Nandroid if you're sick of custom ROMs for whatever reason.
I want to go back to eUI from a custom ROM. What should I do?
If you want to return to the 01D 20s ROM, you have to flash it through the stock LeEco recovery, NOT TWRP! Do not attempt to flash the .bat file from this package or the update.zip from this package via TWRP or you might screw up your device royally. If you absolutely need to go back to this ROM for whatever reason, you need to flash the stock recovery first through fastboot.
I recommend you follow my advice and make a Nandroid backup of your 20s vendor/shop eUI ROM or the 01D ROM (if you had to downgrade because you were on a stock LeEco ROM) before flashing anything else on your device. Guys, it's basic XDA knowledge to make a Nandroid backup of stock software before attempting anything... c'mon now.
Feel free to correct/add to this thread as you see fit. Thanks.
EDIT: Here's a link to all the LeEco Pro3 x720 and x722 files I've collected so far. Uploaded them in case you're not able to download the original files.
WARNING: File size is 15 GB!! https://mega.nz/#!EAN30agB!0miPxwX8uxr-g2oetHB1X09KyPh-y1tq8gcJvDd9X0o (compressed 23 gigs)
Included files:
Batyan 01D (170720-乐视X722-5.8.020S-6.0-纯净) - 01D Developer ROM for x722
FlashOne2.0
le_zl1_qfil_ufs (NOT FOR USE WITH zl0, AKA X722!!!) - if your x722 is bricked, you risk making the brick worse by using these files to resurrect your device. You have been warned.
UNLOCK_RECOVERY_FASTBOOT_TOOL_zl0_LEX722
x722 Stock LeEco Recovery (DO NOT FLASH UNLESS YOU KNOW EXACTLY WHAT YOU'RE DOING)
乐视 pro3 x720 x722 x728 fast模式一键救砖
乐视_X722_救砖包
乐视Pro3（乐视X720 X722 X728）
camera_2api_tora33
Outdated files: You can use normal Magisk instead of these
X722_stable_20s_MagiskRoot_v4A_C.B.G_tora33
X722_stable_20s_NoRoot_tora33
I have x720. I installed 026s with twrp than it removed my twrp. After install I can’t open stock rom because leeco login problem. I can’t use phone. What can I do?
hkemalius said:
I have x720. I installed 026s with twrp than it removed my twrp. After install I can’t open stock rom because leeco login problem. I can’t use phone. What can I do?
Click to expand...
Click to collapse
I didn't know that x720s also suffered from this issue. But since the x720 has a QFIL file, hopefully you'll be able to resurrect your phone in case something goes horribly wrong.
I don't know what the LeEco login issue is. Have you tried Googling your issue? And have you tried actually resetting the password? I know a lot of LeEco servers are down, but it's worth a shot.
I found this thread on unbinding a device from a LeEco account using TWRP: https://forum.xda-developers.com/le-max-2/how-to/tutorial-how-to-skip-unbid-leeco-account-t3657898
First, try to downgrade to 20s using this update.zip. Place update.zip at the root of the internal storage on your phone (where all the folders are): https://forum.xda-developers.com/le-pro3/how-to/5-9-020s-update-x720-t3506829
If that works and you can get into 20s without the LeEco login issue, you're golden, and you can flash TWRP again.
Hopefully you can still access stock recovery on 26s by holding down the volume up and power button. Or it might be a different combo. IDK.
Can i restore my phone from a custom Rom to eui
Hi Everyone.
I want to go back to eui.
Can i Just restore my backup that i have made.
OR how can you back to eui?
Del
Restore?
Must i make a zip file from the backup that i have made with trwp een i want to go back to eui
Marc53 said:
Can i really not restore my backup from eui with trwp
---------- Post added at 06:43 PM ---------- Previous post was at 06:38 PM ----------
Must i make a zip file from the backup that i have made with trwp een i want to go back to eui
---------- Post added at 06:43 PM ---------- Previous post was at 06:43 PM ----------
Must i make a zip file from the backup that i have made with trwp een i want to go back to eui
Click to expand...
Click to collapse
You can start by removing all the quotes from your post!! Why the hell are you quoting my giant post 3 times in a row? Learn how this forum works before posting...
1. You must make a backup of your eUI ROM in TWRP using TWRP's backup function. How do you expect to restore a backup made with another recovery in TWRP?
2. No. All you need to do is make a backup of your eUI ROM in TWRP, then connect your phone to your PC and drag and drop the TWRP folder on your phone to your PC. That's your backup.
When you want to restore your backup, delete the TWRP folder on your phone, and copy and paste the folder you copied to your PC (i.e. the TWRP folder) back to the phone.
Hello.
Couple months ago i started playing around with my p8 i unlocked bootloader flashed twrp make backup of rom (yes without a stock recovery) and i flash cm13.
And here is my problem i want to go back to stock i can easyli flash my stock rom from twrp from backup but then when i want to flash anything else for example another rom with lower android version it's gettong bootloop i even make full flash (every partiton from same update.app) but nothing still bootloop.
And here is strange part in custom rom i flashed supersu it worked great so i wanted it on my stock backuped rom what i'm able to flash and flashing supersu gives me nothing it booting normali not two or three times and after boot it doesn't see root.
Can you tell me where is the problem? I can still use phone with twrp and stock backup rom but i want go in lower android version and i can't.
Pleas help!
Thank you