Database Users

Help Me Please Please

Hi
I Have Samsung Galaxy S.
I Have Installed Paranoid Custom ROM On My Device Now I Need To Flush The Original ROM
But I have Problem : When i connect my phone to pc the phone doesn't show any thing any connection massage and even if i enter the phone in downloading mode the pc and the phone doesn't show show any thing
Please I Need help i can't flash any stock rom please help:crying::crying::crying::crying:

Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)

http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2

I forgot to post links
Here will you find Stock Firmwares
http://cur.lv/2j5o
Flash Guide
http://cur.lv/2j5p
Drivers
http://cur.lv/2j5q
Flashprograms
http://cur.lv/2j5r
Service Manuals
http://cur.lv/2j5s

diklooc said:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
Click to expand...
Click to collapse
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .

Kurre said:
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.

Syrian Eagle said:
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Click to expand...
Click to collapse
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571

Syrian Eagle said:
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Click to expand...
Click to collapse
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.

Lexrsk said:
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Click to expand...
Click to collapse
Ok How Can I Install the ICS/JB Drivers into my phone :crying::crying::crying::crying:

xsenman said:
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Click to expand...
Click to collapse
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected

Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2

Syrian Eagle said:
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Click to expand...
Click to collapse
Every possible reason and solutions that I am aware of, for them are mentioned on that link , you have to try and test each one out, including various Drivers, for you to test...
BUT you keep saying there was no Sign of connection, which means the PC does not say anything (like unknown USB Device) or make a sound and your USB icon does not appear on the phone...am I correct???
That simply means there is NO link, which means, its either your USB cable or USB Port is damaged

alexovy said:
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Sorry nothing get petter still the problem

[Q]_S5360, USB Device Not Recognized_ Help plz

I tried a ROM, and i fail, i can't turn on my phone (s5360), i must back my phone to STOCK ROM with Odin, but USB Device Not Recognized, i installed driver, help me

follow the instructions on my thread
http://forum.xda-developers.com/showthread.php?t=2568853
if you have installed the driver correctly using rear usb ports if on a pc and set your phone to download mode correctly there is no reason why odin will not display com then a number in a coloured box under com:id which shows odin is connected and you have android adb device displayed in device manager

thanks your help but it not work
thanks your help but it not work, :crying: i tried kies, it also not work

gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error

gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
Are you boot into download mode already? If not , odin will not recognize your phone anyway

install samsung usb driver first n then connect your phone with download mode by usb
Note:make sure that usb driver is install properly before connect ur phone

.
marcussmith2626 said:
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error
Click to expand...
Click to collapse
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up

!!
GalKill said:
Are you boot into download mode already? If not , odin will not recognize your phone anyway
Click to expand...
Click to collapse
of course

@@
before that, i installed ROM cm7.2 with Kernel [email protected]#2. but it fail and can't boot. recovery also no

gemnett said:
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
Click to expand...
Click to collapse
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me

marcussmith2626 said:
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me
Click to expand...
Click to collapse
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:

gemnett said:
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:
Click to expand...
Click to collapse
right click the device
click uninstall
restart the pc
then put phone into download mode
connect usb
push vol up on phone to start connection
drivers should then install

Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.

DiwatangTboom said:
Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.
Click to expand...
Click to collapse
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?

gemnett said:
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?
Click to expand...
Click to collapse
Yep.

S4 doesnt get recognized by the Computer

Hey guys,
I read the other threads were people had problems but mine didn't get solved by that. I tried everything from re flashing the Rom/Gapps, taking out the Sim Card & Battery to put it back in, Restarting my phone, Using USB Debugging Mode, trying out different USB ports/cables, installing the Samsung USB Drivers/Kies 3 on my pc, etc.
But nothing I tried helped to solve this error. It started to appear recently but I didn't change anything. My Phone charges when I connect It to my PC but It doesn't show up as a device to transfer files to. Windows doesn't even detect that any device has been connected via USB... Any help is appreciated.

Try this:
dial *#0808# and select AP in USB Settings

Lennyz1988 said:
Try this:
dial *#0808# and select AP in USB Settings
Click to expand...
Click to collapse
Thanks for your help but when I dial *#0808# I just get the message "Connection problem or invalid MMI code."

Sincerity1993 said:
Hey guys,
I read the other threads were people had problems but mine didn't get solved by that. I tried everything from re flashing the Rom/Gapps, taking out the Sim Card & Battery to put it back in, Restarting my phone, Using USB Debugging Mode, trying out different USB ports/cables, installing the Samsung USB Drivers/Kies 3 on my pc, etc.
But nothing I tried helped to solve this error. It started to appear recently but I didn't change anything. My Phone charges when I connect It to my PC but It doesn't show up as a device to transfer files to. Windows doesn't even detect that any device has been connected via USB... Any help is appreciated.
Click to expand...
Click to collapse
Problem of the custom rom that you are using.

Joku1981 said:
Problem of the custom rom that you are using.
Click to expand...
Click to collapse
Thats not possible because nobody else on the Rom thread has that issue

Sincerity1993 said:
Thats not possible because nobody else on the Rom thread has that issue
Click to expand...
Click to collapse
Does it get detected when in download mode? If so, then it's either a driver on your pc or something on your phone.

Lennyz1988 said:
Does it get detected when in download mode? If so, then it's either a driver on your pc or something on your phone.
Click to expand...
Click to collapse
Well, I already know that its either something on my PC or my phone those are the only options :/

Sincerity1993 said:
Well, I already know that its either something on my PC or my phone those are the only options :/
Click to expand...
Click to collapse
You ruled out hardware failure already?

Lennyz1988 said:
You ruled out hardware failure already?
Click to expand...
Click to collapse
No I forgot about that but I hope it's not.

Sincerity1993 said:
No I forgot about that but I hope it's not.
Click to expand...
Click to collapse
That's why I asked about if the phone is being recognized in download mode.

Lennyz1988 said:
That's why I asked about if the phone is being recognized in download mode.
Click to expand...
Click to collapse
Gonna try it out now, I wasn't at home. At least I know that it has nothing to do with my PC now because I tried it on a friends PC and it didn't get recognized either.
Edit: It doesn't get recognized in Download mode

Sincerity1993 said:
Gonna try it out now, I wasn't at home. At least I know that it has nothing to do with my PC now because I tried it on a friends PC and it didn't get recognized either.
Edit: It doesn't get recognized in Download mode
Click to expand...
Click to collapse
If there even isn't a popup showing on your pc when connecting in download mode, then it's hardware.
Try to clean your usb port or replace the module.

Lennyz1988 said:
If there even isn't a popup showing on your pc when connecting in download mode, then it's hardware.
Try to clean your usb port or replace the module.
Click to expand...
Click to collapse
Already did, besides I got 5 USB ports and it doesn't work in any. Anything else I put in them works fine.

Sincerity1993 said:
Already did, besides I got 5 USB ports and it doesn't work in any. Anything else I put in them works fine.
Click to expand...
Click to collapse
The usb port in your phone.

Lennyz1988 said:
The usb port in your phone.
Click to expand...
Click to collapse
Its clean and i dont think thats the problem as anything else I put in there works and it charges normally

Sincerity1993 said:
Its clean and i dont think thats the problem as anything else I put in there works and it charges normally
Click to expand...
Click to collapse
Look, if it doesn't get detected while in download mode then it's:
- Not a software setting on your phone.
- Either you messed up the drivers (unlikely). Remove the drivers completely and it should detect your phone. But it doesn't according to you, so we can rule that out.
- Either you have faulty usb cables (unlikely). You tried multiple.
- Either you have faulty usb port on your pc (unlikely). You tried multiple.
That leaves hardware damage. That seems most likely to me.

Lennyz1988 said:
Look, if it doesn't get detected while in download mode then it's:
- Not a software setting on your phone.
- Either you messed up the drivers (unlikely). Remove the drivers completely and it should detect your phone. But it doesn't according to you, so we can rule that out.
- Either you have faulty usb cables (unlikely). You tried multiple.
- Either you have faulty usb port on your pc (unlikely). You tried multiple.
That leaves hardware damage. That seems most likely to me.
Click to expand...
Click to collapse
Your right that makes sense.. so what do you suggest? I already cleaned the port on my phone. Its weird that it just stopped working from one second to another without me doing anything

Lennyz1988 said:
Look, if it doesn't get detected while in download mode then it's:
- Not a software setting on your phone.
- Either you messed up the drivers (unlikely). Remove the drivers completely and it should detect your phone. But it doesn't according to you, so we can rule that out.
- Either you have faulty usb cables (unlikely). You tried multiple.
- Either you have faulty usb port on your pc (unlikely). You tried multiple.
That leaves hardware damage. That seems most likely to me.
Click to expand...
Click to collapse
Is there anything else I could try out? :/

How to Root Zenfone 5 t00J without PC

Hi, I tried to search in Help Forum about my issue, but did not get a thread on the same.
hence starting a new topic, please help me.
My phone doesn't get recognized on PC or Laptop via usb. So I need to root it via app or any method used with Phone.
If there is any, let me know.
I tried KingRoot and Root Zenfone app, didnt worked.

AFAIK, you can't do that. You need to use computer to root it. Is your usb port damaged? Try clean it up first. Or sometimes it could be just Windows driver issue.

kopter36 said:
AFAIK, you can't do that. You need to use computer to root it. Is your usb port damaged? Try clean it up first. Or sometimes it could be just Windows driver issue.
Click to expand...
Click to collapse
Thank you for your reply, USB port of my device is fine; i can see charging is happening. I tried several ports of Lappy, it says USB not recognized.

sandy7874 said:
Thank you for your reply, USB port of my device is fine; i can see charging is happening. I tried several ports of Lappy, it says USB not recognized.
Click to expand...
Click to collapse
Try to reinstall drivers, or you can install Asus PCLink (that automatically installs Intel USB drivers).

sandy7874 said:
Thank you for your reply, USB port of my device is fine; i can see charging is happening. I tried several ports of Lappy, it says USB not recognized.
Click to expand...
Click to collapse
Did you tried plugging in to another computer to see if it works? Try using different cable that certified for data transfer. Make sure you check "mtp" as your preferred connection method. If computer still says "USB device not recognized", probably your phone usb port might have broken solder connection.

kopter36 said:
Did you tried plugging in to another computer to see if it works? Try using different cable that certified for data transfer. Make sure you check "mtp" as your preferred connection method. If computer still says "USB device not recognized", probably your phone usb port might have broken solder connection.
Click to expand...
Click to collapse
I tried Asus PC link, and it didn't recognized my Device. Seems there is a problem.

sandy7874 said:
I tried Asus PC link, and it didn't recognized my Device. Seems there is a problem.
Click to expand...
Click to collapse
I guess that might be hardware issue as you already installed Asus PCLink on your computer. Did you already tried fastboot mode? Try going into droidboot menu and plug your phone. If it shows up in device manager, then you are all good.
However if it does not work, and if you have a good eyes and basic soldering skill, you might want to disassemble your phone and inspect the USB port solder connections. You might have to replace the bottom board too if you accidentally fried any caps on it.

You can't root your zen5 without pc......

There are 2 methods
sandy7874 said:
Hi, I tried to search in Help Forum about my issue, but did not get a thread on the same.
hence starting a new topic, please help me.
My phone doesn't get recognized on PC or Laptop via usb. So I need to root it via app or any method used with Phone.
If there is any, let me know.
I tried KingRoot and Root Zenfone app, didnt worked.
Click to expand...
Click to collapse
Hey sandy, first check your Android Version. If it is 4.3 or lower then you can root without pc. But if you have an android version higher than that then you will need a pc.
To root without pc:
You can do a simple search on youtube as I already upgraded my Android Version
To root with pc:
Use a reliable tutorial I myself used on youtube:
As I am a new member i cannot give the link but the name of the youtuber is Silicon Rodent
Best of luck:good:

Yt9213aj brick, how to repair?

Yt9213aj brick, how to repair? There is no brush bag.

102649259 said:
Tools and drivers
https://yadi.sk/d/-zOMurC9CLVMrw
---------- Post added at 11:07 ---------- Previous post was at 10:42 ----------
Yt9213aj 1024x768 vertical screen Image package
https://yadi.sk/d/2o29DUD27dMVJg
Click to expand...
Click to collapse
Use 4 pin USB cable to connect the power supply. Download, the machine doesn't respond,

102649259 said:
Tools and drivers
https://yadi.sk/d/-zOMurC9CLVMrw
---------- Post added at 11:07 ---------- Previous post was at 10:42 ----------
Yt9213aj 1024x768 vertical screen Image package
https://yadi.sk/d/2o29DUD27dMVJg
Click to expand...
Click to collapse
Machine Resolution 1024 x 600, horizontal

102649259 said:
brick repair
9213AJ_UI2_1024x600_20200613_3line.rar
Click to expand...
Click to collapse
thanks.
Are there any detailed instructions for use? There is no mirusb interface on the motherboard. Do you need to short the test points behind the motherboard when flashing? Do I need to connect to a power source?

学长不穿鞋 said:
thanks.
Are there any detailed instructions for use? There is no mirusb interface on the motherboard. Do you need to short the test points behind the motherboard when flashing? Do I need to connect to a power source?
Click to expand...
Click to collapse
If your unit is completely dead then you need to go with test points. Check out this thread for info

You can view my post here to get everything you need to debrick your unit while installing the latest mod with Root, TWRP, ViperFx etc.

I have a brick radio YT9213AJ and I can't get it going. Black screen and won't start. When connecting with a USB cable, the device manager of the computer does not detect the driver. It detects it only for 2 seconds after shorting the test points on the board and inserting the cable into the USB. I'm trying to fix Flash Tool but can't. During memory dump and proloader installation from file "YT9213AJ_Full_Memory_Dump_Aug2020_Android9.1_ROOT_TWRP_ViperFX_Custom.BootLogo" it starts checking and reports an error (1042). When I install the original ROOM from the "xygala.com" site, of course after shorting the test points and plugging the cable into the USB port, it starts working and after 10-12 seconds it reports a DRAM error (5054). Please help.
I attach the screens of the displayed errors.
Edit:
I've already dealt with the following:
By shorting the test points, I turned on the Write Memory button, then I connected the USB cable to the computer and when the red strip in Flash Tool started, I disconnected the test points and at the same time turned on the 12V power supply.

miecz16 said:
I have a brick radio YT9213AJ and I can't get it going. Black screen and won't start. When connecting with a USB cable, the device manager of the computer does not detect the driver. It detects it only for 2 seconds after shorting the test points on the board and inserting the cable into the USB. I'm trying to fix Flash Tool but can't. During memory dump and proloader installation from file "YT9213AJ_Full_Memory_Dump_Aug2020_Android9.1_ROOT_TWRP_ViperFX_Custom.BootLogo" it starts checking and reports an error (1042). When I install the original ROOM from the "xygala.com" site, of course after shorting the test points and plugging the cable into the USB port, it starts working and after 10-12 seconds it reports a DRAM error (5054). Please help.
I attach the screens of the displayed errors.
View attachment 5196737View attachment 5196729View attachment 5196733
Edit:
I've already dealt with the following:
By shorting the test points, I turned on the Write Memory button, then I connected the USB cable to the computer and when the red strip in Flash Tool started, I disconnected the test points and at the same time turned on the 12V power supply.
Click to expand...
Click to collapse
Please read carefully the post that I shared. The unit has to stay OFF during the whole restoration process

miecz16 said:
I have a brick radio YT9213AJ and I can't get it going. Black screen and won't start. When connecting with a USB cable, the device manager of the computer does not detect the driver. It detects it only for 2 seconds after shorting the test points on the board and inserting the cable into the USB. I'm trying to fix Flash Tool but can't. During memory dump and proloader installation from file "YT9213AJ_Full_Memory_Dump_Aug2020_Android9.1_ROOT_TWRP_ViperFX_Custom.BootLogo" it starts checking and reports an error (1042). When I install the original ROOM from the "xygala.com" site, of course after shorting the test points and plugging the cable into the USB port, it starts working and after 10-12 seconds it reports a DRAM error (5054). Please help.
I attach the screens of the displayed errors.
View attachment 5196737View attachment 5196729View attachment 5196733
Edit:
I've already dealt with the following:
By shorting the test points, I turned on the Write Memory button, then I connected the USB cable to the computer and when the red strip in Flash Tool started, I disconnected the test points and at the same time turned on the 12V power supply.
Click to expand...
Click to collapse
did u resolve? I have same issues...