Related
I love my MDA more and more now. But after my first week or two i was begining to think i had made a mistake buying it. Thanks to the kind and helpful folk around here and other forums, i now have it doing everything i wanted it to do and in the way i want it to do it.
I use it for TomTom, playing DIXed DVD's, music, podcasts, games, the usual email/web duties and more. And thanks to the great WiFi 'G' reg hack i can now stream my large lossles FLAC files (with the help of fantasitc Conduits Pocket Player) right into my Hifi system, just like my Squeezebox 3 media player. It's actually much better than an ipod (albeit with less storage when out of the house - although i could access my music at home from a hotspot). A fully fledged media streaming device for free! (well, a small fee for Pocket Player and a 2.5mm to 3.5mm jack adaptor).
Not only does this hack also enable 'g' speeds, but i can confirm that it also massively increases performance on 'b' speed networks too (which mine is limited to due to being an 'adhok' network).
Sure, a faster proc, better camera and maybe even 3G would be nice. But i have no wish to ever make video calls or use Skype (i'm the geek of the group and no-one else i know uses it).
I understand there will always be better third party software (Media Player is an utter waste of space for example) but why should we have to make techy and annoying tweaks to the registry, just to get the best from the unit? Why the hell do we need to hack the reg just to make a basic settings change, such as hiding SIM contacts (which is an option in just about every mobile from the last 5 years).
Is it just bad planning? Poor thinking on the manufactures part? or is there just a genuine reason for 'hiding' these settings and not making them accessable from standard menu's?
The older i get, the less time i have to mess around so much. I have better things to do these days to be honest.
Surely they would have more to gain by activating the performance increases themselfs, rather than us more tech savy types to figure out how to alter the registry. Half the things this device has been slated for in reviews can actually be sorted, but the average (make that normal) buyers of this device will be feeling a bit short changed if you ask me.
I guess the only thing left for me to do now is dump the T-Mobile ROM and use a more slimline one. Or maybe i should just figure out who to lose some of the crap from my existing install?
What is it with these companies? Don't they know when they are on to a good thing? Or maybe, just maybe it to keep us coming back for more and upgrading year after year? Hey ho...
/rant over.
Dom
Very interesting topic, well put and one which I'm sure will be relevant to me very soon...y'see my Wizard arrives in two days and it was reading posts such as yours which helped me take the plunge.
I don't mind messing about with PDAs, phones, PCs etc to get the the best performance but (as you rightly point out) we shouldn't have to. However, given the thousand of threads and posts on this (incredibly good) site, I am somewhat confused about what to do first with my Wizard.
So, could you please take a few minutes to post what changes, hacks etc you have done to get yours where you (almost) want it to be?
Many thanks in advance.
Mos
mosgeo said:
So, could you please take a few minutes to post what changes, hacks etc you have done to get yours where you (almost) want it to be?
Many thanks in advance.
Mos
Click to expand...
Click to collapse
The first things i would always do after a hard reset (format), after syncing back all my contacts/callender of course...
Reg hacks (main ones, i have forgot a few) -
*Hide SIM contacts (so the dont appear pointlessly twice)
*Enable 'g' speed Wifi
* Disable the annoying 'you are about to go online' message. You will understand when you get yours, VERY VERY annoying - you get it even when you are online and just switch back to PIE.
* There are some good performace tweaks to, which i forgot about.
Essential software i could not be without (some free, some not - unless you are naughty. Don't be naughty now )
*TomTom (Sat Nav)
*Memory Map Pocket Nav + GPS and the O.S. maps i use for walking
*TCPMP - The best video player
* Conduits Pocket Player - the best music player IMO (Streaming, gapless playback and OGG/FLAC support - nice). costs a few beer tokens, but free good alternatives are available.
*Resco File explorer and Reg editor.
*Opera Browser - Renders pages faster than PIE, handles java script etc better and Tabbed browsing makes GPRS speeds much less of a pain.
*Memmaid - for cleaing up temp files, dead registry entries etc.
*Storage tools - for formating and sorting out MiniSD cards - WM5 can't even format a bloody memory card!
*Wififofum - for finding WiFi networks (more for fun than anything).
*OMAPclock - for a bit of overclocking (more for fun again, i rarely feel the need is that great)
*And of course registry wizard for the good people of these forums
Thats about it really for me, but i am finding more cools things everyday to play with but those are my must have ones - i have had to install
A few must have games include, AOE, UFO, 3D pool and Soduko.
Personally i dont use a today plugin. I have not found one i like yet and most have icons etc that are to small on the MDA's small screen or just make clutter rather than really help me. A well organised start menu is enough for me.
Oh, and of course you can flash the ROM. But i have not done this yet. T-Mobiles version does not seem that bad but i hear the O2 version is a real dog and well worth doing. I just worry about lost Wifi and GPRS functionality i have heard about some people having.
Really wasn't expecting a reply so soon, and certainly not such a comprehensive one. Thanks for your time. I may be back with more questions once I actually get my mitts on a Wizard. Cheers!
yes I agree , it is great post, specially for new people like me, I got mine (Qtek 9100) just on Friday, and I am still figuring out its functions.
But I have question - if you have time to answer - I really don't know about WiFi function -which is in the device- , if I want to connect to the internet I should have a wireless router connected to my main PC, is that right ? I have read some of posts in here, that they can connect to the Internet - through their PPC - when they are outside or walking or traveling from area to another, by scanning for the nearby Connection, then they can use it to visit websites, does this cost money when they connect to the Internet using the WiFi ? And how can I do the same if it doesn't cost m money ? Can the "WiFi Fofum" program do this o is it only to scan any available connection nearby ? How can I connect to the internet (through WiFi) when this programm finds connection? And if it is really totally free..
I know this are bunch o Questions But I really want to use this function - if possible - specially that I work outside my city and I have to spend couple of hours travelling almost everyday. I appreciate any comment.
Wireless router at home if you want to use it wirelessly or if you do what I do now and then..... connect via the USB cable to your PC. Out and about you can connect for free if someone has a wireless network within range that has no WEP security enabled
There are wireless spots around the country but you have to pay for the main ones via an account you have to set up (kind of pay as you go) Cloud is one company that runs WiFi hotspots on a PAYG basis.
If you leave your WIFI scanning it will tell you if you are within range of a network, it will also tell you if it is secured or not, if it isn't then 9/10 you can just connect and use it
I have been meaning to make a post just like the OP. You are on the mark, IMO! This situation really begs the question, how can this thing be so feeble out of the box?
Thank you XDA and all of the kind people on this forum. You have been the best!
Thomas1234 said:
if I want to connect to the internet I should have a wireless router connected to my main PC, is that right ? I have read some of posts in here, that they can connect to the Internet - through their PPC - when they are outside or walking or traveling from area to another, by scanning for the nearby Connection, then they can use it to visit websites, does this cost money when they connect to the Internet using the WiFi ?
Click to expand...
Click to collapse
In my case, my service provider (Cingular) offers a service called GPRS/EDGE, which lets the Wizard access the Internet through the cell phone connection.
I use the WiFi when I don't have a good connection. Most of the time, for browsing mini-websites and sending e-mails, there isn't much speed difference between WiFi and GPRS. I don't think the Wizard is fast enough to process more than a few 100 kbps of data.
If you don't want to (or can't) pay for a GPRS service, it's possible to "war drive" for access points. The Wizard will find them, although its WiFi reception isn't as powerful as a laptop's.
On my phone, if I enable WiFi, the phone will automatically use WiFi instead of GPRS when WiFi is available. If you don't want to pay GPRS charges, you might want to configure the phone so that it doesn't use GPRS.
can you explain 'wardriving' please? is it just freely using wifi points without paying? bit confused
Thanks
Jamie,
You are correct in your assumption !! You would be amazed at the number of 'unlocked' WiFi routers out there....
Ever tried running Bluetooth detection in a pub and seen how many phones are out there too ?
If you can find an unlocked WiFi router running DHCP - 'Fill your boots' !! Sometimes it's even possible to guess IP addresses of other PC's on the network, access em and leave a kindly note to thank them for their hospitality but warn them of their folly and the potential for disaster......I know I have but then that's me: Mr Altruism
Ok how can I get any internet connection through WiFi ? Should I just enable my WiFi and it'll scan for any available connection nearby ? I did but nothing happened, it wants from me to fill form which I really don't know anything about it... Or do I have to use a program to scan for connection ? And if yes, should my WiFi be enabled ? What is the best program for scaning ? I wish if someone explains me all that and how can start using WiFi to get a connection and an access to the internet but slowly, will be thankful.
Im new to all of this, but what can you do with the registry wizard and how do you install it? I foud a zip file for it, but cant get it to load.
Thanks!
i have a question too if you have the time mate,
I don't exactly want to use the edge since i dont have an unlimited plan or something.how can i delete these settings and do you think any problems will occur?(sending recieving mms)
basicly i don't it to connect to edge(gprs)auto.is there a way to fix this
thanks so much.
HI,
Ok, on my way back from Blockbuster I was taxing the ole cognitive faculties and, being the cheap b*stard I am, thought of a possible way of gaining free internet access on the move. Here is my idea.
Using a Orange UK Pay as You Go sim in a GSM data card hooked up to my main PC at home with full access to High Speed internet. I set up a RAS server, add this number to my Magic Numbers and dial in for remote access and iNet connection. Of course if this is possible compression could be used before IP packets are routed to the mobile device improving, what I assume to be, a lousy bandwidth.
Further questions related to this:
What is the available bandwidth of a GSM data call?
Do Orange allow data calls on non-contract numbers, and are Orange able to detect that a line is being used for data rather than voice? And, if yes to the latter, can a data call masquerade as a voice?
Are there any good compression clients for Windows Mobile?
Being stuck with GPRS/EDGE on my VOX the data plans are diabolical, now I have a eee pc I'm kinda getting these two devices to dance together as best they can for the ultimate mobile experience, and if this theory is plausible and with performance comparable to GPRS, then I think im on to something worth while for my self and others.
Any response is appreciated
not sure if it's possible
but data gsm is only 9600
Unfortunately I don't have any concrete answers for you, but I'm thinking about picking up an EEE PC as well, and this is an absolutely FANTASTIC idea. I'm extremely interested in how this project fares for you. When it comes to phone networks, I'm still a noob, but I've been administering a satellite network for a few years, and based on the networking experience i've gotten in that short time, what you propose seems entirely possible. The biggest issue that I think you're going to run into is getting the compression to work properly. I'm worried that it will impede the processing performance of the phone. I think you may have better luck finding a packetshaper for the EEE rather than your WM device.
On a side note, what distro of Linux do those run? i've been looking around, and havn't been able to find out if it's Ubuntu, RedHat, anything. Everything I find just says 'Linux'. Also, have you been able to easily pair your phone to the EEE? I'm running Ubuntu Feisty Fawn on my desktop and I can't get anything out of the USB connection. (I know this is off-topic of your original post, and i apologize, but please PM me if you, or anyone else, have any suggestions. [i've searched forums for some suggestions, havn't worked out] Thanks.)
Good Luck!
Ok thanks all for the response, im going to post info etc. as and when I find it.
Here is general GSM info that confirms and elaberates on Rudegar's post
http://www.tml.tkk.fi/Studies/Tik-110.300/1998/Newtech/fast_gsm_2.html
in brief, using compression 'up to 36000 bps' can be acheived, which is sufficient for Image free web-surfing courtesy of Opera and telnet. Moreover, the article referenced is fairly old and I imagine DUN compression algorythms have come on leaps and bounds, especially since the broadband revolution. I think you're right in suggesting that decompression may tax my Vox, I will use the VOX as modem either over USB or BT. Next I will research compression, keep you all posted.
As for the EEE, well I am totally in love with mine. The stock Eee comes with Xandros a flavour of Linux that I found to be quite bitter. I am currently using XPTablet Edition. I have tried Ubuntu, gOS, eeexubuntu and couldn't deal with the inability to upscale the resolution so I went Windows. Now I can scale 900x600 without any glitches. I have modified my 4g with a touchscreen, 2 gigs of RAM in the post, all I need now is a way of fitting an Xscale PPC sisterboard and the HTC Shift can suck my.......
My only advice is DON'T GET a eee pc 2G, as you will only regret it.... I did!
Oh... I think you'd have to recompile your kernel to get some kind of activesync replacment. I've seen the answer somewhere on my travels--probably www.Eeeuser.com or www.ubuntu.com--If i find it again ill let you know.
Whilst browsing for a cheap GSM modem I came across the Three Pay 3G modem reduced to £69 from Ebuyer. Of course I bought one on the spot--perhaps I'm not such a cheap b*stard after all. For this reason this little project is now less of a necessity. I will be using a VPN of some kind but I doubt that it will be of much relevance to this post. If I do stumble on anything of interest I will post. As the modem has 2G capabilities I will test a few dialin setups.
Hey guys,
I've just switched to the HTC Legend and I absolutely love it so far. Great device and I'm very happy I changed to Android from my brother's old iPhone 3G.
One thing I've noticed, though (like a lot of the phone's reviewers) is the crappy WiFi reception. I expected it to be bad... but not this bad. I have to be either in the next room to the router or upstairs directly above it to get signal above 1 bar, and if i move 10 feet away it cuts out entirely.
Contrast this with the iPhone 3G or even the HTC Touch2 I had last year, which were both able to pick up WiFi from my backyard or the street out front (both 15 meters away from the router). I'm not expecting the power of my laptop's wifi radio, but is there any way to boost the reception on this thing? It's not the end of the world cause I have a fair bit of data included in my plan, but it's nice to do some guilt free youtube surfing around the house without worrying which room I'm in.
Cheers,
Jennan
Simple. Either update your phone's radio firmware or buy a range extender for your router.
Ah, thanks for that. I'm fairly new to smartphones, how would I go about updating my radio firmware?
Cheers
Can anybody help me out? Cheers
jennan88 said:
Can anybody help me out? Cheers
Click to expand...
Click to collapse
What's your phone's software version number?
I checked the HTC website today and followed the step by step guide to finding out what my software version number. Unfortunately for me, it was up to date, so it looks like this is as good as I'll get Wifi radio wise.
Thanks for your help though
I find the WiFi reception reasonably good. Remember where the WiFi transceiver is positioned (to the left of the camera) and make sure you don't obscure it with your hands. Also, check that your router is not on the same WiFi channel as your neighbours (and ideally about 3 channels clear either side). You can use WiFi analyser from the market to survey your WiFi.
Sent from my HTC Legend using XDA App
Just to clarify - that's the left of the camera as viewed from the front of the phone.
Sent from my HTC Legend using XDA App
Get high gain atenna(s) for your router?
boost wifi ?
I have same problem. My previous HTC diamond had much better WIFI reception.
I found here a more recent rom from the one I have and all instructions needed
h**p://forum.xda-developers.com/showthread.php?t=706435
mind the **
keep in mind that in order to upgrade radio you need to root the phone and doing so you'll invalidate warranty.
That's why I am waiting for Froyo update and then I'll decide if to root or not
A less practical, but theoretically valid solution, would be to take apart your Legend, and add a bigger wifi antenna. Just replace the black bit surrounding the camera, and bolt on a small satellite dish. Point it at the router, you'll be fine.
If you were to use a ROM that let you hold the phone at upside down, and still see the screen "the right way up", that may improve the Wifi reception, it worked with the Network.
I'm using SuperFroyo
I and my father have a new SGS2. When I connect to Wifi, no problems at all. On BOTH, the internet connection is very slow, with stops and always changing H... 3G... H....... If I connect to my old phone, the speed is fine, so it's not the local provider. My SGS2 has a lot of apps in it, and my father's one is stock ready and new, but the problem is the same for both. Also it spends a lot of battery.
Some people are complaining about this problem, is there a solution?
Try disabling fast dormancy.
how do you disable fast dormancy?
cheers
Change network setting to gsm only mode if it still come you might consider to chanhe the sim card, like i plan to.
I also using this gt p1000 with different sim card and it happened more faster browsing rather than this dual core gt i9100
sent from my 2.3.3|dxjpe DJGTabs7
Probably due to the radio sucking. There are others you can flash to...not sure which is best.
Are you by chance on AT&T in the US? Anyone know of the best radio for this phone on AT&T?
I also get very slow internet comnection in areas where high speed UMTS is not available. Actually, in these areas the phone is so slow that it always looses communication with the server. Practically, internet does not work AT ALL!
I'm really tired of being regularly pissed off by this phone and its many defects!
UPDATE:
Just tried disabling fast dormancy by using the hidden service menu *#9900#
It looks like at least now commection works. Speed is not optimal but that may be normal because at the moment I am in an area not covered by H+ connection.
Sent from my GT-I9100 using XDA App
YET ANOTHER UPDATE: Forget what I just said in the post above. It only worked for a few minutes, and then I'm back with no connection. It looks like this phone is rather deaf to 3G networks. But again, I may be wrong. The thruth is that I am desperately struggling to make this bloody phone work, but so far I have no clues at all.
Sent from my GT-I9100 using XDA App
There have been random reports of regional and carrier specific problems with 2/3G. Some have been fixed with s/w updates, some people had to get rid of the phone. If your phone and your father's phone perform differently using the same SIM card, than his phone has a hardware problem. If they both suck, then you can either keep playing with the settings, hope a future s/w release fixes the problem, or get different phones.
The SGS2 appears to be router sensitive. It doesn't like D-Link routers. It appears to like Netgear routers a lot. While you shouldn't have to, changing your router can make a big difference in Wi-Fi performance.
Also, both of the conditions above wreak havoc on battery life. I can get 15 hours connected to my Netgear router while people with D-Link's are lucky to see 8.
I do have a second phone (my good old nokia n95 8GB), and also a second contract with the same carrier. I've already tried swapping the sim cards, and the result is always the same: N95 working flawlessly and SGS2 struggling even to get a reply from the server.
Obviously it's a problem related to the SGS2 (mine is unbranded and unrooted, just made the update to the latest firmware 2 months ago), and not to the carrier, although in this period I am in my parents' house, where signal is slightly lower than what I get in my house, at the opposite side of the city. So some cross relationship with signal strength may actually also be possible.
I do have Dlink routers both in my hose and in my parent's house, but I get very good wifi connection, I really can't complain about that. Also because my routers are different from the model that is known to cause problems. Anyway wifi connection is not in discussion here. It's cellular network connection that's problematic.
This evening, after disabling and reenabling all possible settings, and setting network connection to CDMA only, I was able to get fairly good connections, however we shouldn't be supposed to trickle anything in order to simply get cellular network data connection.
Sent from my GT-I9100 using XDA App
Hello. First, great forum- I can feel the love, as well as the collective genius at work here. It's refreshing to find a forum where people actually know their sh*t on a real, technologically advanced level. It's relieving as well, considering the headache that my new G2 is causing... as follows:
This is a Sprint device and I am still within the time frame to return if a resolution is not found.
Issue:
1.) While wi-fi remains connected (doesn't drop), it is terribly slow, averaging .8 - 3 mbps. Whereas, other Samsung android devices are averaging 15-20 mbps. Internet is cable, and I have reset the modem without experiencing any performance increase. (technicolor TC8305C, bgn)
2.) 4g is no better, averaging a mind boggling .5 mbps. (Don't even get me started on 3g- .1-.3 mbps)
3.) If 4g is even able to connect, which is rare... it disappears and and is nowhere to be found, or be (re) enabled.
Attempted (unsuccessful resolutions):
1.) Performed Sprint recommended troubleshooting techniques:
a.) updated profile
b.) soft reset(s)
c.) hard resets- multiple
2.) contacted customer care: received "refreshers," and was walked through numerous settings and performed various resets.
Recommended CC resolution: return device for exchange.
3.) Sprint store attempted to identify problem, and in the process found that their demo, along with employee handsets (G2) as well as new unboxed versions had the same problem. They offered to switch to an S4 or Nexus5 for free, or wait a couple days to see if the LG rep could offer a fix.
(further) Resolution: pending
Here's the deal- I think we can all agree that this phone is kick ass. Therefore, I would rather not switch, as I enjoy the experience it provides, as well as the satisfaction of getting to really bond with a device when troubleshooting them. Though, this phone seems to be pretty 'buggy,' and while I don't mind tinkering with computing devices (been seeing the blue screen since win '95), I'm not sure I want to be dealing with the potential hassle with a device we all rely on day in and day out to be our life blood... plus, just because I don't see/haven't experienced the other issues others have, doesn't mean they won't potentially manifest down the road. :/ Maybe the Nexus 5 is the better choice... but it seems like cost cutting has taken place in a couple areas- battery (2300), and the camera. Almost like the G2 is the flagship and the other is mildly scaled down in certain aspects even though the end result is compelling for both.
Please know that I am scouring middle earth low and wide for resolutions, and have not composed this post without first looking and becoming familiar with other peoples similiar experiences. I will continue to fact find, and I apologize for not reading all related threads before posting, but time is of the nigh, as I am still within a time frame to return in case the problem is inherent to this specific device (a lemon). Plus, I don't quite understand everything you're talking about, as I've never had/chosen to dig that deep into the obscure settings and techniques I've seen listed (and also because I JUST got it) Hence, the user name- g2 n00b.
So thank you in advance for your time in helping with this. It is both greatly appreciated, and not without gratitude on my part. Also, I hope I displayed proper educate by formating this post in a manner which is easy to sort through. K. let the trouble shooting begin.
also, to the mods- sorry if this is thread/issue has already been covered elsewhere. I also posted this issue on another board and nobody had heard of this problem, so I am fairly confident that i may be justified in having poted this. However, feel free to delete/lock/merge/ if I just didn't see it.. but please provide the link so I can further fact find, because I'm stumped. Thanks.
I just did a speedtest on mine (Also on Sprint) using Wifi.
Same speeds I get on my PC.
It's an oddball suggestion but did you disable the Sprint connection optimizer?
Optimizer enabled. Though, I have tried disabling it and running diagnostics to no effect- doesn't matter what I do, it still won't exceed 3mbps, unless I am lucky enough to receive 4g in certain areas.. then it's a 'blazing' 3.5mbps, but usually .8. I have msl code and have adjusted band priorities and still no difference there, including ##72786 to reset default connections to make sure nothing was adversely affected after investigating the issue.
I'm really bummed. I love this phone. I feel like everything I felt I was missing in the S3/S4 are present here. Love the interface, form factor and all of the settings. Maybe I should take Sprint up on there offer to get an S4 a Nexus 5, but I REALLY don't want to go back to caveman battery hog status on the S4 and have to purchase a backup. I imagine the N5 is more efficient in this area, but it still has a 2300 battery vs 3000 in the G2. Needless to say, I'm frustrated and confused.. but often times, such is life.
Any thoughts on the N5, or suggestions to further trouble shoot are greatly appreciated and welcome?
I have disable the connection optimizer and have done this http://forum.xda-developers.com/showpost.php?p=47423537&postcount=1
The only other idea I have is hit up a coffee shop and due a speed test on their wifi.
The sprint stores by me have crappy wifi speed hence the coffee shop.
I seem to have mostly resolved the issue. I switched channels and encryption protocol. Apparently, my g2 didn't appreciate AES very much. Has anyone else seen performance differences with their device when comparing AES to TKIP? If so, are they drastic? I would think AES would be fine with the g2, considering how advanced it is. I consider it to be somewhat unfortunate if I am forced to select TKIP just so I can get a decent connection. That is, unless of course there are settings I can alter in the ##data# screen that can make better use of this encryption. Is there anything I can do now that I have narrowed down the culprit?
G2 n00b said:
I seem to have mostly resolved the issue. I switched channels and encryption protocol. Apparently, my g2 didn't appreciate AES very much. Has anyone else seen performance differences with their device when comparing AES to TKIP? If so, are they drastic? I would think AES would be fine with the g2, considering how advanced it is. I consider it to be somewhat unfortunate if I am forced to select TKIP just so I can get a decent connection. That is, unless of course there are settings I can alter in the ##data# screen that can make better use of this encryption. Is there anything I can do now that I have narrowed down the culprit?
Click to expand...
Click to collapse
What wireless router are you using? I use a D-Link at home and my G2 kept connecting and disconnecting repeatedly. I was able to fix the problem by updating the router's firmware to the latest version. We've never had any problems with other wifi devices on our router, so it seems the G2 has some unique peculiarities WRT wifi.
I'm running AES with no issues, but noticed following.
LG (Sprint) connects first with a slow 72mbps and switches after a while to a faster speed of 433mbps
I have an Asus Router RT-AC66R, if I play around on the router with Frequencies or the wireless mode, LG would go down to a slow speed.
Don't have Optimizer enabled.
I suspect your problem is a router problem and not the phone.