Dual boot for meizu m2 note or any meizu device ... - Meizu MX

Hoped some devs can make meizu kernel to support dual boot ...
Thanks ...
Sent from my m2 note using XDA-Developers mobile app

fooiskandar said:
Hoped some devs can make meizu kernel to support dual boot ...
Thanks ...
Sent from my m2 note using XDA-Developers mobile app
Click to expand...
Click to collapse
How big are the 2 roms you want to boot with?
Internal storage is only 16GB with a lot less of available space once you have a full rom loaded.
So it's simply not really possible with two daily used roms.
Better you swith rom using full twrp backup. Then you already have multiple boot support via this workaround.

I thing if dual boot work for meizu ... we can test any rom without replace our daily rom.
Thx ...
Sent from my m2 note using XDA-Developers mobile app

That's exactly what I'm doing, I have 3 Roms that I switch for a daily use.
Cyanogen, Flyme 5.1.6 & 5.6.10.18.

makuu said:
That's exactly what I'm doing, I have 3 Roms that I switch for a daily use.
Cyanogen, Flyme 5.1.6 & 5.6.10.18.
Click to expand...
Click to collapse
How do that ... guide please ...
Sent from my m2 note using XDA-Developers mobile app

Setup your daily ROM. Backup via twrp on SD.
Wipe everything except internal, SD & USB storage.
Flash a second daily ROM. Backup via twrp on SD and so on.
When you want to use a specific ROM. Boot recovery, wipe all except all kinds of storage. Restore the ROM you want to use.

makuu said:
Setup your daily ROM. Backup via twrp on SD.
Wipe everything except internal, SD & USB storage.
Flash a second daily ROM. Backup via twrp on SD and so on.
When you want to use a specific ROM. Boot recovery, wipe all except all kinds of storage. Restore the ROM you want to use.
Click to expand...
Click to collapse
Ok ... btw what needed on the option on backup section ... by default or something ...
Sent from my m2 note using XDA-Developers mobile app

Backup all (Default settings).

makuu said:
Backup all (Default settings).
Click to expand...
Click to collapse
Okey ... thanks ...
Sent from my m2 note using XDA-Developers mobile app

makuu said:
Backup all (Default settings).
Click to expand...
Click to collapse
Btw bro ... if i every want change rom take a wasted time ...
Please for all devs which using meizu m2 note build some kernel with support dual boot OS ...
Example project : http://forum.xda-developers.com/showthread.php?t=2285366
[KERNEL][SINGLE/DUAL BOOT][JB/KK][STOCK/CM]blackhawk's NEXT kernel 2.4
Regards,
Sent from my m2 note using XDA-Developers mobile app

So?
Have you ever used a dual boot kernel before?
How much space do you have left in your internal storage?
Do you you think you have enough room for a second ROM (daily used?).
Because in my case I don't.
So why so much trouble?

makuu said:
So?
Have you ever used a dual boot kernel before?
How much space do you have left in your internal storage?
Do you you think you have enough room for a second ROM (daily used?).
Because in my case I don't.
So why so much trouble?
Click to expand...
Click to collapse
Ya i used it on my galaxy tab 2 p3100 16gb internal ...
And it running well ... left space arrange on 3 - 4gb left ...
Sent from my m2 note using XDA-Developers mobile app

Related

Hello i wish someone can make multirom for our tiny device

I have a nexus 7 and multirom is wow,tassadar give the source for port multirom for other device ,i search and google said that merruk kernel dotes ,but in features of kernel no said that ,help developers help
I Think is no...may be
Samsung Galaxy Y does not has adequate internal memory to hold 2 Roms.
yes youre right
adityaavhad said:
Samsung Galaxy Y does not has adequate internal memory to hold 2 Roms.
Click to expand...
Click to collapse
Yes,you are Right ,but multirom put second ,third,etc ROM in the sdcard ,multirom is amazing
multirom do
MultiROM allows you to boot ROM from SD card while the main ROM (the one in internal memory) stays untouched. It also features simple boot manager, which shows up during boot and allows you to chose which ROM to boot.
So its like dual boot..
Sent from my GT-P3110 using Tapatalk HD
tats a cool thing....would be awesom if someone pulled it through..

Smartisan OS out for Note 2

As the title states this Chinese ROM has been released for our phone. From what I gather it is similar to MIUI in the sense of it being a rather hefty redesign of the default Android UI.
Did anyone get to try it on their phone ?
You can grab it from here : http://www.smartisan.cn/download.html
http://www.youtube.com/watch?v=8aRUZwJXlHA
Smartisan reviewed. Pre- Alpja for SGS3
Might have to try that this weekend. Does anyone know if it has en-GB locale?
Sent from my GT-N7100 using Tapatalk
Bert.C said:
Might have to try that this weekend. Does anyone know if it has en-GB locale?
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Guess we'd have to try to find out =)
blorro said:
Guess we'd have to try to find out =)
Click to expand...
Click to collapse
Edit:
US English available as system language.
Not prerooted but a search for smartisan on XDA gave a flashable zip from sgs3 section that sorted that.
Quite iOS:ish impression on the whole.
Responsive and snappy UI.
Sent from my GT-N7100 using Tapatalk
Can you provide any screenshots please?
Sent from my GT-N7100 using Tapatalk
Bert.C said:
Can you provide any screenshots please?
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Check the video posted earlier. UI is what's shown in it. (And I haven't found a way to take screenies ,might not be built-in it seems)
Sent from my GT-N7100 using Tapatalk
What is it based on ? Sammy or AOSP/CM ?
Will it be traduced in french in a near future ?
[email protected] said:
What is it based on ? Sammy or AOSP/CM ?
Will it be traduced in french in a near future ?
Click to expand...
Click to collapse
CM based. French,US English,German,Japan,Korea and Chinese included as selectable system languages.
Sent from my GT-N7100 using Tapatalk
Thanks for the answer
Tried it. Fairly decent. Superficially, the 3x3 grid size is off-putting. Even the 4x4 grid size isn't any better. Apart from that, very responsive and snappy ui as reported by blorro. All in all, good for a weekend experiment.
Sent from my GT-N7100 using XDA Premium 4 mobile app
farazlodhi007 said:
Tried it. Fairly decent. Superficially, the 3x3 grid size is off-putting. Even the 4x4 grid size isn't any better. Apart from that, very responsive and snappy ui as reported by blorro. All in all, good for a weekend experiment.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Was just about to reflash to another ROM and the OTA Updater on Smartisan notified of an Alpha Update.
Seemingly some call recording functions added now and recording editing possibilities.
The clock seems to get an overhaul as well.
Found this 2:11 Presentation on Youtube which revealed some more built-in features:
http://youtu.be/JI3oe-yktaE
wow very impressed from that video.
Some Screenies
View attachment 2521370
View attachment 2521371
View attachment 2521372
View attachment 2521373
CM 4.2.2 Base.
No S-Pen features , Smartisan featured camera with "Narcissist-mode" on front camera, Gyro sensor-enabled back camera.
How's it for a daily driver? Any knows issues? Camera/Sound/calls all working fine?
Do you install it just like any other custom ROM? i.e. root, move zip to SD card and flash it via recovery?
lifehijack said:
How's it for a daily driver? Any knows issues? Camera/Sound/calls all working fine?
Do you install it just like any other custom ROM? i.e. root, move zip to SD card and flash it via recovery?
Click to expand...
Click to collapse
Been running it as a daily for past 3 days, no issues detected.
Make sure you have updated CWM recovery since it's 4.2.2
Backup EFS (Dr Ketan has a good tool for it,check his thread)
install from .zip as usual.
For root access, i found this on SGS3 Q&A Forum:
==============================================================================================================================================================
" castagnazzi Old 22nd June 2013, 02:00 PM (Last edited by castagnazzi; 22nd June 2013 at 02:15 PM.) #17
castagnazzi's Avatar Junior Member
For those like me, do test in Chinese rom Smartisan OS, and want to root, use this link, and flash in recovery, go to the icon Su and run it, it worked for me in 90%, reinstalled my APPs by Titatiun Backup just can not acessoa the backup folder Titaniun that is on the card, but transfer this folder to the internal memory and I could install 90% of my apps.
I used this link:
http://pan.baidu.com/share/link?shar...18152&third=15
==============================================================================================================================================================
Flashed , then i ran titanium restore w/o issues.
After flashing update via OTA, root access was kept.
I have downloaded the ROM but before going ahead I want to ask whether this is SDS safe or not and would it change the modem also as if it change the modem there are chances of efs corrupt
माझ्या नोट 2 मधील टपाटाॅक प्रो मधुन पाठविला
fyh said:
I have downloaded the ROM but before going ahead I want to ask whether this is SDS safe or not and would it change the modem also as if it change the modem there are chances of efs corrupt
माझ्या नोट 2 मधील टपाटाॅक प्रो मधुन पाठविला
Click to expand...
Click to collapse
Wouldn't know anything about SDS bug I'm guessing its fixed since this is CM based.
My modem did not get changed, always backup EFS before playing around.
Sent from my GT-N7100 using Tapatalk
blorro said:
Wouldn't know anything about SDS bug I'm guessing its fixed since this is CM based.
My modem did not get changed, always backup EFS before playing around.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Which kernel it is showing if it is cm kernel then it is SDS proof
माझ्या नोट 2 मधील टपाटाॅक प्रो मधुन पाठविला
fyh said:
Which kernel it is showing if it is cm kernel then it is SDS proof
माझ्या नोट 2 मधील टपाटाॅक प्रो मधुन पाठविला
Click to expand...
Click to collapse
Well,CM kernel it is. 3.0.64 -CM.
Sent from my GT-N7100 using Tapatalk

(MOD) Dual/Tri Boot Galaxy Tab S 8.4 T700

Hello I have made a very detailed video showing how to get Stock Samsung Lollipop (5.0.2) and CyanogenMod 12.1 (5.1.1) on the same tablet [T700 Canadian version] dual booting.
THIS IS DONE AT YOUR OWN DESCRETION and I am not responsible if something goes wrong or you do something wrong. I have repeated the process at least 10 times to see how it works. Even did it on a Samsung Galaxy S4 and Note 4 with no issues.
PLEASE TAKE YOUR TIME even watch the video a few times before you give it a try. In the end you can always flash stock Samsung Rom and do a factory reset.
I really enjoy using this feature and having the choice between two different roms on the same phone.
You can share apps from your stock Samsung Rom to your Cyanogenmod Rom without having to reinstall most of your apps. Saving lots of space.
I hope you enjoy.
Like.
Subscribe.
Click an add or two.
Thanks and a wonderful day.
Happy dual booting.
VIDEO LINK:
DEMONSTRATION USING Samsung Galaxy Note 4 Dual/TRI Boot/multi Rom SUPPORT (WARNING ⚠ AND VERY IMPORTANT!!!!
⚠ INSTALL YOUR SECOND AND THIRD ROMS ON DATA (NOT DUAL ON THE GALAXY TAB S 8.4) REPEAT INSTALL SECOND AND THIRD ROMS ON DATA (NOT DUAL)⚠:
https://youtu.be/CpegzNc4ZH0
DEMONSTRATION USING Samsung Galaxy Tab S 8.4 t700:
COMING SOON
Download Link Dual Boot Patcher:
https://snapshots.noobdev.io/
Download Link CM 12.1 (klimtwifi) WORKING ON T700 CANADA:
https://download.cyanogenmod.org/?device=klimtwifi
Download Link Cyanogenmod Google Apps:
http://wiki.cyanogenmod.org/w/Google_Apps
Thanks:
chenxiaolong
So by using FolderMount I am able to save so far 3gb of space on my data folder. I transfer app data to external SD card. Link the app data on external SD card with FolderMount which tricks the app into thinking it is installed on internal data.
Then I created a backup in FolderMount. Switch roms load FolderMount. Restore backup for FolderMount. Restore link app data locations because cm and touchwiz see external SD card different and FolderMount corrects this thankfully.
Click the green linking tab a few times and FolderMount will recognize the data.
As I said I have saved 3gb of room on my internal data having app data on external SD card.
If something like this was built into our dualboot patcher it would make things easier. Maybe if we spoke to the developer of FolderMount. If not using both FolderMount and Dual boot patcher I now have 3 roms on my Note 4 and almost 4gb free space on internal data between all 3 roms. Look at the pics of before in my previous comment and this one to see.
Just finding ways of maybe booting 4 roms on one phone.
Will report back.
Think I am on to something, let me know what you think. Give it a try possibly. I will be making a youtube video to help better demonstrate.
Is there a list of supported devices somewhere?
ashyx said:
Is there a list of supported devices somewhere?
Click to expand...
Click to collapse
Yes there is and here you go. Look at the attached pictures.
Thanks. Would there be much work porting this over to the 10.5 models?
It can be done.
Download Storage Partitions from the play store.
Need screenshots of all the partitions from the app I just stated in the all partitions tab on the left.
Also need to know your ro.product.device= from system build.prop.
Look at pictures I am attaching.
Heres my screenshot of my partitions for SM-T800 WiFi Tab S 10.5. @Leonidas87
ro.product.device=chagallwifi
Excellent!!. I was able to dual boot to CM 12.1 on Tab S 8.4 (SM-T700). Primary ROM is TW Detox and the secondary being CM 12.1. Successfully shared the apps across the ROMs.
The whole process took less than 5 minutes. Once again thanks for such a helpful post.
DUHAsianSKILLZ said:
Heres my screenshot of my partitions for SM-T800 WiFi Tab S 10.5. @Leonidas87
ro.product.device=chagallwifi
Click to expand...
Click to collapse
I will look into it, thanks for the info.
vishnu8058 said:
Excellent!!. I was able to dual boot to CM 12.1 on Tab S 8.4 (SM-T700). Primary ROM is TW Detox and the secondary being CM 12.1. Successfully shared the apps across the ROMs.
The whole process took less than 5 minutes. Once again thanks for such a helpful post.
Click to expand...
Click to collapse
Great to hear I am glad everything went smoothly for you. You are welcome and I am always happy to help and spread the word.
Any news fo tab s sm-t705 (4g version) ?
Enviado desde mi SM-N910F mediante Tapatalk
whoops.
How do I port thsi to my T705?
Yup. Easy. Edit your build.prop so that ro.product.device reads klimtwifi instead of klimtlte. I have successfully done this with chagalllte changing to chagallwifi.
@Leonidas87, can we get chagalllte and klimtlte added to this so we don't need to edit build prop? WiFi and lte variants are identical with the exception of sim card...
Leonidas87 said:
DEMONSTRATION USING Samsung Galaxy Note 4 Dual/TRI Boot/multi Rom SUPPORT (WARNING AND VERY IMPORTANT!!!!
INSTALL YOUR SECOND AND THIRD ROMS ON DATA (NOT DUAL ON THE GALAXY TAB S 8.4) REPEAT INSTALL SECOND AND THIRD ROMS ON DATA (NOT DUAL):
Click to expand...
Click to collapse
Hi
I managed to get CM12 installed is my secondary ROM on DATA on my Tab S 8.4. Is it the same process to install GAPPS?
If I chose data it installs it as a third ROM.

Need to move game data to External SD card

Hi I am using Zenfone 2 laser ze550kl. I am on latest stock rom. I want to play HD games. As we have only 16 gb internal memory and all apps are installed on the internal memory I have only 2 gb left on it. So how can I install and play hd games which needs 1.5 gb space to install and without hampering my phone performance.... Please help....
Sent from my ASUS_Z00LD using XDA-Developers mobile app
Have some app like "folder mount"
And if have xposed use app Obb on SD (hard use than folder mount"
@ValKyre
That's a very old way to do things...
@mithips
You need adoptable storage, and must be on Android Marshmallow first. You should already have it if you did all your ZE550KL updates.
See the guides I've found here to enable it: http://forum.xda-developers.com/zenfone-2-laser/help/enable-adoptable-storage-asus-android-t3419252
Cr0ssL1nk said:
@ValKyre
That's a very old way to do things...
@mithips
You need adoptable storage, and must be on Android Marshmallow first. You should already have it if you did all your ZE550KL updates.
See the guides I've found here to enable it: http://forum.xda-developers.com/zenfone-2-laser/help/enable-adoptable-storage-asus-android-t3419252
Click to expand...
Click to collapse
Thanks for your reply. Can you please confirm whether this above mentioned method is working on Ze550kl as well?
Sent from my ASUS_Z00LD using XDA-Developers mobile app
Adaptable storage should work on all Android 6.0.1 devices...
SoNic67 said:
Adaptable storage should work on all Android 6.0.1 devices...
Click to expand...
Click to collapse
No it doesn't, some manufacturers like Samsung, LG and Asus disable it for "performance reasons".
---------- Post added at 11:04 AM ---------- Previous post was at 11:02 AM ----------
mithips said:
Thanks for your reply. Can you please confirm whether this above mentioned method is working on Ze550kl as well?
Sent from my ASUS_Z00LD using XDA-Developers mobile app
Click to expand...
Click to collapse
I can't confirm for ZE550KL, but it's a generic procedure for any Android 6.
Because the procedure don't need flashing or root, you will not have any problems, it's safe to do it.

Redmi 4 prime Android update from Marshemello 6.0 to 11 or 12

Hello;
I want to ask who better knows than me if I can upgrade Android 6.0 which I have on my Redmi 4 Prime to a stable version of Android 11 or 12, the picture is attached of my current firmware and versions, as with the current version am losing some apps which I stopped supporting Android 6.0.
Thank you so much for your attention and participation.
Best Regards
​
kmliug said:
Hello;
I want to ask who better knows than me if I can upgrade Android 6.0 which I have on my Redmi 4 Prime to a stable version of Android 11 or 12, the picture is attached of my current firmware and versions, as with the current version am losing some apps which I stopped supporting Android 6.0.
Thank you so much for your attention and participation.
Best Regards
​
Click to expand...
Click to collapse
I don't think that's possible. The best you could do is to try and modify the apps or force them to run, but that's very hit and miss.
chittrip said:
I don't think that's possible. The best you could do is to try and modify the apps or force them to run, but that's very hit and miss.
Click to expand...
Click to collapse
HHi ,
I've installed,yesterday , HAVOC 4.9 based to Android 11.
In the last 2 years i've used HAVOC 3.12 found here in XDA and based to Android 10
Both of them are great with my Redmi 4 Prime (MARKW)....remember to patch audio with sound fix that find online
best regard
kintaro_pd said:
HHi ,
I've installed,yesterday , HAVOC 4.9 based to Android 11.
In the last 2 years i've used HAVOC 3.12 found here in XDA and based to Android 10
Both of them are great with my Redmi 4 Prime (MARKW)....remember to patch audio with sound fix that find online
best regard
Click to expand...
Click to collapse
Hello; I always see "MARKW" what is that? how an I know if my Redmi 4 prime is "MARKW"?
I have miui port android 10 installed and it is working just fine,even better than stock rom.I prefer it better than lineage os.Android 11 is the last aosp.Android 12 does not exist for redmi 4 prime.No kernel for A12.Markw is nick name for Redmi 4 prime.
File on MEGA
mega.nz
This is link to rom for Redmi 4 prime miui android 10
You must use treble recovery to flash.Wipe cache,dalvik,data,system,vendor.
marduj5 said:
You must use treble recovery to flash.Wipe cache,dalvik,data,system,vendor.
Click to expand...
Click to collapse
Hello; I would appreciate if you send me the step-by-step guide to upgrade as I am not an expert with that.
Also I found that many are talking that the upgrade is suitable only for "MARKW" and I do not know what is that, I am not sure my redmi 4 prime is "MARKW"
Many thanks in advance,
kmliug said:
Hello; I would appreciate if you send me the step-by-step guide to upgrade as I am not an expert with that.
Also I found that many are talking that the upgrade is suitable only for "MARKW" and I do not know what is that, I am not sure my redmi 4 prime is "MARKW"
Many thanks in advance,
Click to expand...
Click to collapse
Redmi 4 prime is markw.Install twrp treble recovery if you don't have it.Put rom zip on the sd card or internal memory of your phone.Choose advance wipe.Wipe cache,dalvik ,system,data,vendor.yThan choose rom zip and flash it.After it is done just reboot phone and wait few minutes.
marduj5 said:
Redmi 4 prime is markw.Install twrp treble recovery if you don't have it.Put rom zip on the sd card or internal memory of your phone.Choose advance wipe.Wipe cache,dalvik ,system,data,vendor.yThan choose rom zip and flash it.After it is done just reboot phone and wait few minutes.
Click to expand...
Click to collapse
Hello marduji, thanks a lot for replying. How can I check if mine is markw.install treble recovery?
kmliug said:
Hello marduji, thanks a lot for replying. How can I check if mine is markw.install treble recovery?
Click to expand...
Click to collapse
I also tried to follow up your advice but when pressing "power button with volume down key" the mobile boot on "Fastboot" and then it gets stuck on this "fast boot" screen.
kmliug said:
I also tried to follow up your advice but when pressing "power button with volume down key" the mobile boot on "Fastboot" and then it gets stuck on this "fast boot" screen.
Click to expand...
Click to collapse
To enter recovery you must pres power button + volumeup+volume down in the same time.You have to learn some things .Read first,you have all this on xda and internet.Treble twrp has wipe and flash vendor option.
marduj5 said:
To enter recovery you must pres power button + volumeup+volume down in the same time.You have to learn some things .Read first,you have all this on xda and internet.Treble twrp has wipe and flash vendor option.
Click to expand...
Click to collapse
marduj5 said:
To enter recovery you must pres power button + volumeup+volume down in the same time.You have to learn some things .Read first,you have all this on xda and internet.Treble twrp has wipe and flash vendor option.
Click to expand...
Click to collapse
Thanks all o.k now, I used your ROM, but when booting it asks for a password, what is it, I appreciate your prompt reply dear.
Hello @marduj5, hope you are fine and doing well, I faced problems with receiving and sending calls with the ROM you attached here like I am not reachable from time to time also I can not make some times a call. so I was searching for a more stable ROM and I found "Havoc 4.9" I flashed it, but I am missing Mi cloud synchronization and the MARKW seems as not recognized as a Xiaomi mobile phone, how can I solve that? which reflects restoring the SMS and the call history and other backups I used to do with my MARKW.
Thanks in advance for your advice
Sorry.Try rhis romhttps://mega.nz/file/8oNEVLQJ#d7ao3zdi83mbuX-GMm3mhKWCzEm_jklJp1bIzHi4pl8
1.8 GB file on MEGA
mega.nz
marduj5 said:
1.8 GB file on MEGA
mega.nz
Click to expand...
Click to collapse
What is this brother? what ROM? which Android version? does it support Mi cloud?
kmliug said:
What is this brother? what ROM? which Android version? does it support Mi cloud?
Click to expand...
Click to collapse
Miui rom,android10

Categories

Resources