Restoring backup got stuck at Cyanogen logo - Zuk Z1 Q&A, Help & Troubleshooting

Hi Guys,
I have unlocked bootloader , flashed TWRP recovery and flashed latest CM13(from official site) Rom yesterday. However, i have taken a back up of my system image of COS 12.1 so that i can revert back to the factory version. Today i tried to restore that backup after clearing cache/data/system using TWRP and then the phone got stuck at Cyanogen logo. I am not able to go into recovery by pressing power button and vol up button. The phone is not powering down also.. Please help me on this issue. Do we have any tool to flash the stock rom and recovery .?

Give me link of that CM13
Sent from my ZUK Z1 using Tapatalk

rishr4 said:
Hi Guys,
I have unlocked bootloader , flashed TWRP recovery and flashed latest CM13(from official site) Rom yesterday. However, i have taken a back up of my system image of COS 12.1 so that i can revert back to the factory version. Today i tried to restore that backup after clearing cache/data/system using TWRP and then the phone got stuck at Cyanogen logo. I am not able to go into recovery by pressing power button and vol up button. The phone is not powering down also.. Please help me on this issue. Do we have any tool to flash the stock rom and recovery .?
Click to expand...
Click to collapse
To enter recovery mode you have to push both volume buttons + and - and power button so 3 buttons pushed till the device reboots and enter recovery
Enviado desde mi ZUK Z1 mediante Tapatalk

acuicultor said:
To enter recovery mode you have to push both volume buttons + and - and power button so 3 buttons pushed till the device reboots and enter recovery
Enviado desde mi ZUK Z1 mediante Tapatalk
Click to expand...
Click to collapse
Thanks Brother.. It worked :good: and i flashed original stock cm12.1 from TWRP and flashed CM recovery as well
However, after coming back to CM12.1 from CM13, i think i am facing some network issues like data services not getting connected intermittently (which used to work fine previously in 12.1). Do we have any work around or quick fix for this issue.? I am currently running on COS 12.1-YOG4PAS3AJ.

Nizamani said:
Give me link of that CM13
Sent from my ZUK Z1 using Tapatalk
Click to expand...
Click to collapse
Here is the link for official & nightlies of CM13 - https://download.cyanogenmod.org/?device=ham

Nizamani said:
Give me link of that CM13
Sent from my ZUK Z1 using Tapatalk
Click to expand...
Click to collapse
Here is the link for official & nightlys of CM13 - https://download.cyanogenmod.org/?device=ham

Related

[SOLVED] [CloudyG2 3.1] If you get a bootloop at LG logo follow this

I was on stock lollipop before flashing the CloudyG2 3.1 and i got stuck at the LG logo (looping). I wish this guide will help you in case.
Download the bootstrack (lollipop) from http://blastagator.ddns.net/bootloader.php
and place it on the phone storage (you can transfer files while your on the recovery TWRP)
Do the wiping mentioned in the cloudy's thread and install the rom followed by the bootsrack.
**To go to recovery use this button combination
Hold the power button till it fully shuts down. The press vol down and power till the lg logo appears. Release them and repress. Use keys to factory reset and it will direct you to the recovery.
Thanks! Bump or stock bootstack?
Sent from my LG-D800 using Tapatalk
anbinhv said:
Thanks! Bump or stock bootstack?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
(Bump LP)*
Works Great!
Worked Great! Thanks for the help!

Is this brick a hardware fault or software issue?

I was flashing a cm13 rom on top of my cm12.1 rom when I opened the camera and it soft rebooted, I powered it down mid reboot and now I can only access fastboot, or sometimes it will flash the oneplus logo over and over again. (Video below) I tried this method here (http://www.ibtimes.co.uk/how-quickly-unbrick-oneplus-2-oxygen-os-2-0-1516574) but it still does the same oneplus logo flashing.
https://www.youtube.com/watch?v=H0t8BN6bZDo
How can I fix this or is it a hardware brick?
You have fast boot its not hard bricked.
You're in a bootloop, enter recovery press power+vol down wipes and flash again cm13
Sent from my ONE A2005 using Tapatalk
I can get into oxygen recovery now but wiping still wont make it boot, what can I do from here?
Edit - I adb sideloaded oxygen OS and it now boots, thanks.
This one works. Thanks @Spannaa
EDIT: OnePlus2 Stock Reset
EDIT: Glad your phone is back. :cheers:
krishna442 said:
http://forum.xda-developers.com/showpost.php?p=62440352&postcount=21
Check this. You should wait after staring the process in Chinese Application. It installs HydrogenOS recovery, so you need to install HydrogenOS via sideload. Then download OxygenOS and flash via HydrogenOS recovery.
Click to expand...
Click to collapse
@krishna442 - Just FYI, OnePlus2 Stock Reset is probably a better option now as it's based on the files OnePlus support use now.
Spannaa said:
@krishna442 - Just FYI, OnePlus2 Stock Reset is probably a better option now as it's based on the files OnePlus support use now.
Click to expand...
Click to collapse
I wasn't aware of that @Spannaa
Thank you so much! :good:

[Unlock] Zenfone2 official Android 6.0 Unlock

Two-Click Unlock for Zenfone 2 official Android 6.0
original post in Taiwan Asus Zentalk by @shakalaca
**do it at your risk**
1.Your PC must be adb environment ready.
2.You should know how to get into stock bootloader.( press Power and Volume up together)
files needed:
1. Download unlock.bat and restore.bat from here.
2. Recomended TWRP for verification.(repacked)
steps:
1.Copy unlock.bat and restore.bat on to your PC.
2.Plug your device in PC, click unlock.bat. The program will enter bootloader mode, reboot and then unlock.
3.After it run through unlock, the device will indicate it will reboot in 5 second. **important** PRESS VOLUME UP at the moment to enter bootloader.
4. If you miss step 3, the device will stuck in Asus logo. Don't worry. Just press POWER and VOLUME UP to enter bootloader.
5.When the device is in bootloader, click restore.bat Wait for the reboot and you are done unlock.
6.To verify unlock status, flash the recommended TWRP.
Good luck and all credits to @shakalaca
Is it the same as the unofficial method for bootloader unlock? also is there a way to relock bootloader like flashing it again over MM Beta?
Sent from my ASUS_Z00AD using XDA-Developers mobile app
Flynhx said:
Is it the same as the unofficial method for bootloader unlock? also is there a way to relock bootloader like flashing it again over MM Beta?
Sent from my ASUS_Z00AD using XDA-Developers mobile app
Click to expand...
Click to collapse
Different by the looks , the date gives it away and not a temp twrp-- although i am going to find out in about 10 mins --lets hope this works :highfive:
Not working for me
says flashing droidboot .184
anyone got this to work ?
no recovery after trying this - got stock recovery back from here ok
mega:///#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw!ok8SQKII
timbernot said:
Different by the looks , the date gives it away and not a temp twrp-- although i am going to find out in about 10 mins --lets hope this works :highfive:
Not working for me
says flashing droidboot .184
anyone got this to work ?
no recovery after trying this - got stock recovery back from here ok
mega:///#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw!ok8SQKII
Click to expand...
Click to collapse
According to @shakalaca, the restore process get back to 6.0 ifwi. After the unlock, the droidboot stay at .184 alright.
What is the status of your device before unlock, rooted or unrooted? Can you flash the twrp provided by him ?
samcjtsai said:
According to @shakalaca, the restore process get back to 6.0 ifwi. After the unlock, the droidboot stay at .184 alright.
What is the status of your device before unlock, rooted or unrooted? Can you flash the twrp provided by him ?
Click to expand...
Click to collapse
my device doesnt get to this part > 3.After it run through unlock, the device will indicate it will reboot in 5 second. **important** PRESS VOLUME UP
but stays on > press any key to finish...... which then closes the window
I flash twrp,says ok but reboots back to bootloader after restarting recovery.
flashed back stock recovery and factory reset for another attempt...lets see
Works good to me. Miss that step where I supposed to pressed vol up button and phone stuck on white splash screen. Force off and then go to bootloader, then execute restore.bat and done. After that root and exposed and then I mess up some another stuff so need to flash 6.0.1 MOFD_SDUPDATE manually from stock recovery. Everything pass smoothly but root and exposed framework disappeared obviously. Root and exposed again no problems
cannot flash custom roms???
Hi everyone,
I successfully unlocked my bootloader from MM beta, I successfully flashed the recommended twrp recovery, I successfully flashed rom and gapps but when I reboot the phone goes back to twrp recovery. Anyone else facing the same issue? Or is it impossible to flash custom roms?
Yousvel said:
Hi everyone,
I successfully unlocked my bootloader from MM beta, I successfully flashed the recommended twrp recovery, I successfully flashed rom and gapps but when I reboot the phone goes back to twrp recovery. Anyone else facing the same issue? Or is it impossible to flash custom roms?
Click to expand...
Click to collapse
ATM this unlock can backup/restore stock rom in recommended twrp, but can't flash CM. Seems its boot.img need to be repacked.
Yousvel said:
Hi everyone,
I successfully unlocked my bootloader from MM beta, I successfully flashed the recommended twrp recovery, I successfully flashed rom and gapps but when I reboot the phone goes back to twrp recovery. Anyone else facing the same issue? Or is it impossible to flash custom roms?
Click to expand...
Click to collapse
Same problem here
samcjtsai said:
ATM this unlock can backup/restore stock rom in recommended twrp, but can't flash CM. Seems its boot.img need to be repacked.
Click to expand...
Click to collapse
how can i flash a stock 5.0 rom from the recommended twrp? I tried to do that but it doesn't work. Do I have to flash a stock 6.0.1 beta rom?
It worked perfectly!Thanx a mill!
Can't flash TWRP although the splash screen became white after unlock.bat -> unlocked
After restore.bat the splash screen went black as usual. Then I flash the recommended TWRP. But when I choose recovery mode in fastboot, it reboot to fastboot. When I adb reboot recovery in Android OS, it reboot to stock recovery. Can anyone help me to solve this problem?
I'm running .69 MM beta, I replaced the .54 fastboot image in the package with .69 one. Does this effect the unlock state?
timbernot said:
Different by the looks , the date gives it away and not a temp twrp-- although i am going to find out in about 10 mins --lets hope this works :highfive:
Not working for me
says flashing droidboot .184
anyone got this to work ?
no recovery after trying this - got stock recovery back from here ok
mega:///#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw!ok8SQKII
Click to expand...
Click to collapse
Edit Unlock.bat, find "sleep 3" in the line 24 and change it to "sleep 25" to increase the waiting time to detect back the fastboot after your phone reboots...
This fixed me the issue.... try it...
can i flash supersu to become root after unlock with this method?
ponnuvelpandian said:
Edit Unlock.bat, find "sleep 3" in the line 24 and change it to "sleep 25" to increase the waiting time to detect back the fastboot after your phone reboots...
This fixed me the issue.... try it...
Click to expand...
Click to collapse
Thanks :good: , i`ll keep that in mind when the time comes back on 5 atm
kamyk70 said:
Works good to me. Miss that step where I supposed to pressed vol up button and phone stuck on white splash screen. Force off and then go to bootloader, then execute restore.bat and done. After that root and exposed and then I mess up some another stuff so need to flash 6.0.1 MOFD_SDUPDATE manually from stock recovery. Everything pass smoothly but root and exposed framework disappeared obviously. Root and exposed again no problems
Click to expand...
Click to collapse
How you root your MM beta?, please tell me, i wanna root mine too
Sent from my ASUS_Z008D using XDA-Developers mobile app
Bring twrp zip android 6 please.
Can anyone backup with TWRP and upload?
Factory reset, backup with TWRP, and upload[emoji6]
Gesendet von meinem ASUS_Z00AD mit Tapatalk
KarloHD said:
Bring twrp zip android 6 please.
Can anyone backup with TWRP and upload?
Factory reset, backup with TWRP, and upload[emoji6]
Gesendet von meinem ASUS_Z00AD mit Tapatalk
Click to expand...
Click to collapse
Are you going to post this in EVERY tread?
Sent from my ASUS_Z00A using Tapatalk
Now, if we can unlock stock 6.0, can anyone confirm me if we can directly flash custom roms without downgrading to 5.0
after running restore it worked, however when running unlock.bat, I get permission denied and the device goes tinto bootloader bootloop, and I had the device rooted and bootunlocked already in lollipop, I wonder why that happens?

TWRP: No OS installed. Device stuck on logo screen when booted.

Hi, I've been trying to install android M 6.0 through TWRP, and somehow deleted the OS from my system. Now whenever I boot my device (Huawei P8-lite dual sim) it gets stuck on the Huawei-logo screen. I can get into fast boot& rescue mode and I can get into TWRP, but I don't know how to repair my phone from there.
You didn't make nandroid backup?
That would be great at this point
If you can get into recovery flash your rom back! It should be fine then
Sent from my C6903 using XDA-Developers mobile app
I found a 6.0 custom rom on here and installed it through TWRP and it works
Help
kevinvcj said:
I found a 6.0 custom rom on here and installed it through TWRP and it works
Click to expand...
Click to collapse
Could u send me a link to that ROM? i have the same problem but i can't find it :/ :crying:
Just try to turn it off, you will have 2sec black screen, then press Vol + and ON/Off and you will go to TWRP. From there is easy...
kevinvcj said:
I found a 6.0 custom rom on here and installed it through TWRP and it works
Click to expand...
Click to collapse
Hwhar rom It is tel me.

Device is fine but can't access recovery!

Hello everyone
I have twrp installed on my phone with custom rom, the device is working fine (i can access OS) but i wanted to change my rom so i go to fastboot and tried to boot to recovery but when i press the power button instead of twrp showing up, Google logo shows up and get stuck on it
What i have tried: i gave it around 10 minutes, didn't work
I tried flashing it again (same twrp version)
Tried flashing using twrp app
I tried flashing an older version
Excuse my English and any help well be appreciated
Sent from my Nexus 6P using Tapatalk
Up
Sent from my Nexus 6P using Tapatalk
After flashing TWRP you must flash magisk or TWRP wont stick..so flash TWRP via fastboot, dont reboot, go to recovery and flash magisk..it should be fine
ahmed_k1996 said:
Up
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Double check make sure your on the latest TWRP. After flashing I use the volume keys in bootloader mode to switch to recovery. Then power button to confirm the action . Like mentioned above flash magisk 16 to make recovery stick.
scrin378 said:
After flashing TWRP you must flash magisk or TWRP wont stick..so flash TWRP via fastboot, dont reboot, go to recovery and flash magisk..it should be fine
Click to expand...
Click to collapse
Exodusche said:
Double check make sure your on the latest TWRP. After flashing I use the volume keys in bootloader mode to switch to recovery. Then power button to confirm the action . Like mentioned above flash magisk 16 to make recovery stick.
Click to expand...
Click to collapse
Thanks guys, it worked
Sent from my Nexus 6P using Tapatalk

Categories

Resources