Is this brick a hardware fault or software issue? - OnePlus 2 Q&A, Help & Troubleshooting

I was flashing a cm13 rom on top of my cm12.1 rom when I opened the camera and it soft rebooted, I powered it down mid reboot and now I can only access fastboot, or sometimes it will flash the oneplus logo over and over again. (Video below) I tried this method here (http://www.ibtimes.co.uk/how-quickly-unbrick-oneplus-2-oxygen-os-2-0-1516574) but it still does the same oneplus logo flashing.
https://www.youtube.com/watch?v=H0t8BN6bZDo
How can I fix this or is it a hardware brick?

You have fast boot its not hard bricked.
You're in a bootloop, enter recovery press power+vol down wipes and flash again cm13
Sent from my ONE A2005 using Tapatalk

I can get into oxygen recovery now but wiping still wont make it boot, what can I do from here?
Edit - I adb sideloaded oxygen OS and it now boots, thanks.

This one works. Thanks @Spannaa
EDIT: OnePlus2 Stock Reset
EDIT: Glad your phone is back. :cheers:

krishna442 said:
http://forum.xda-developers.com/showpost.php?p=62440352&postcount=21
Check this. You should wait after staring the process in Chinese Application. It installs HydrogenOS recovery, so you need to install HydrogenOS via sideload. Then download OxygenOS and flash via HydrogenOS recovery.
Click to expand...
Click to collapse
@krishna442 - Just FYI, OnePlus2 Stock Reset is probably a better option now as it's based on the files OnePlus support use now.

Spannaa said:
@krishna442 - Just FYI, OnePlus2 Stock Reset is probably a better option now as it's based on the files OnePlus support use now.
Click to expand...
Click to collapse
I wasn't aware of that @Spannaa
Thank you so much! :good:

Related

Nexus 10 does not boot after Update

After attempt at installing software update to Nexus 10 tablet will not boot. Have wiped Cache and even then did a factory reset. Nothing. Google appears and then twirling colorful dots and nothing. For hours just twirling dots., Samsung and Google and Best Buy geeks says nothing they can do. No longer under warranty but very upset since tablet was working great until update. I am not very tech savvy but can anyone help or do I just have a new paperweight? Thanks for any advice.
I have not made any modifications to the tablet.
Just flash the newest factory image. Get it and the instructions to flash it from here:
https://developers.google.com/android/nexus/images
yes flash the newest image
After getting a notification of the latest update I went and rebooted for the update to install but it went to the twrp recovery and nothing happens, is there a way to install the update?
VivaErBetis said:
Just flash the newest factory image. Get it and the instructions to flash it from here:
https://developers.google.com/android/nexus/images
Click to expand...
Click to collapse
Gibbothegreat said:
After getting a notification of the latest update I went and rebooted for the update to install but it went to the twrp recovery and nothing happens, is there a way to install the update?
Click to expand...
Click to collapse
Still having proble? what is your recovery ? stock? did you update the bootloader? depending on your answer I should be able to help you out, thx
Khaon said:
Still having proble? what is your recovery ? stock? did you update the bootloader? depending on your answer I should be able to help you out, thx
Click to expand...
Click to collapse
Hi Khaon, I have stock lollipop version 5.1.1 . (LMY47V) and latest twrp version. When upgrading it restarts and goes to recoverys main screen.
BTW how can I check which version my bootloader is?
same problem
VivaErBetis said:
Just flash the newest factory image. Get it and the instructions to flash it from here:
as a newbie .I'm not allowed to reference your link !!
I rooted my nexus 10 using xda instructions., installed CWM. All good. I tried backup and recovery and screwed something up in recovery. Got stuck in recovery mode reboot loop. Many gyrations, no fix, so I tried factory reset. Still no fix.
I decided to install a new version of the OS using the Mantaray tar you reference above. UBS connecting and fastboot. All messages look good. Now I have the problem reported in this thread. Stuck with flying balls and no boot. Very interested in any suggestions you may have.
Click to expand...
Click to collapse
Gibbothegreat said:
Hi Khaon, I have stock lollipop version 5.1.1 . (LMY47V) and latest twrp version. When upgrading it restarts and goes to recoverys main screen.
BTW how can I check which version my bootloader is?
Click to expand...
Click to collapse
So you keep just boot looping into twrp, right ?
Did you try installing a custom ROM through adb or just connecting your device?
If it keeps boot looping you gotta to wipe the full storage.
Khaon said:
So you keep just boot looping into twrp, right ?
Did you try installing a custom ROM through adb or just connecting your device?
If it keeps boot looping you gotta to wipe the full storage.
Click to expand...
Click to collapse
No, on a normal reboot or a shutdown/restart it's fine no problems there but when I try to install the update via system update it reboots into twrp. I attach a pic of my system.
Gibbothegreat said:
No, on a normal reboot or a shutdown/restart it's fine no problems there but when I try to install the update via system update it reboots into twrp. I attach a pic of my system.
Click to expand...
Click to collapse
Oh I see, well, you should just flash a custom ROM or if you want to stay with official factory images, you should just follow instruction there:
https://developers.google.com/android/nexus/images
What you do need is just have fastboot executable once you are into the bootloader.
You can easily access the bootloader from twrp : shutdown > reboot into booatloader
Cool thx for your continued help :good:
The problem is due to your attempting an OTA update with a custom recovery (TWRP). You can only do OTA with stock recovery. Once you are in this situation, your easiest way out of it is to simply apply the latest factory image using "fastboot", but this will also wipe your user data so backup any photos, music, etc. before you start. You will also have to reload programs from Playstore once the new image is installed.

[SOLVED + GUIDE] ASUS ZenPad 8.0 Z380KL how to solve bootloop

Hi Guys, i think that i have softbricked mi Zenpad :silly:
So, i have used KingRoot in order to have root permission, after i have use super_me or something like this in order to change KingUser app with SuperSu app, but after the reboot it has gone in bootloop
I have tried to reset it using standard recovery (by ASUS) but it doesn't works, it is still in bootloop.
Can you help me ? (again :laugh
Thanks to a Jappanase blog i was able to unbrick my tablet and install CM 13.0 without have a funcrional rom: {Mod edit}
------------------------------------------------------------------------
How to solve:
1_ Download the following zips in a folder
Code:
[URL="https://vasy.ru/TWRP/P024/"]https://vasy.ru/TWRP/P024/[/URL] TWRP
[URL="http://4pda.ru/pages/go/?u=http%3A%2...zip&e=48313529"]http://4pda.ru/pages/go/?u=http%3A%2...zip&e=48313529[/URL] CM 13.0
[URL="http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico"]http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico[/URL] G APPS
[URL="http://d-h.st/8FqR#"]http://d-h.st/8FqR#[/URL] ADB and other utilities . Thanks to @backwardastep
2_ Move CM 13.0 and G APPS in a sd card and insert it into the tablet
3_ Unzip z380klroot_w_xposed
4_ move the TWRP.img in the "z380klroot_w_xposed" folder
5_ open cmd on Windows and move in the z380klroot folder. Type:
Code:
cd C:\Users\XXX\Desktop\z380klroot_w_xposed
6_ Connect the tablet
7_ Then type:
Code:
fastboot boot twrpxx.xx.xx.img
the tablet will start to looking for a device
8_ Press power + "volume +" in order to put the tablet in recovery (you can also put the tablet in recovery mode before the point 7)
9_ Then it should boot a temporany TWRP
10_ From TWRP wipe all data and install first CM 13.0 and GAPPS as usual
Now you have a working CM 13.0
PS. i noted in the Andmen blog's that exist also an Resurrection Remix
Code:
[URL="https://mega.nz/#F!3JtglKKJ!JIL2MZnzTg1vgW8mLLd8kA"]https://mega.nz/#F!3JtglKKJ!JIL2MZnzTg1vgW8mLLd8kA[/URL]
Custom Kernel CM-13.0
For Asus P024 cm13 Z380KL
NEOX_P024-cm13-v1.0-U700-zram
The problem is twrp can't be touch, the display seems locked
bangdes said:
The problem is twrp can't be touch, the display seems locked
Click to expand...
Click to collapse
yeah, i have exaclty the same problem: http://forum.xda-developers.com/and...z380kl-unrootable-t3213933/page3#post69032596
i'm kinda of stuck :silly:
How do you flash back to ASUS's stock ROM? I downloaded 4.8.0_WW off 4PDA but it gives me an error when trying to flash it via TWRP. Any ideas?
xDark_ said:
How do you flash back to ASUS's stock ROM? I downloaded 4.8.0_WW off 4PDA but it gives me an error when trying to flash it via TWRP. Any ideas?
Click to expand...
Click to collapse
You cannot flash the stock rom from twrp.
Stock roms work only with stock recovery
giorgiofolle said:
You cannot flash the stock rom from twrp.
Stock roms work only with stock recovery
Click to expand...
Click to collapse
So I would have to reflash the stock recovery and use that to flash stock? If I use ASUS's FlashTool would that reset everything back to stock?
Sent from my Samsung SM-G930T using XDA Labs
xDark_ said:
So I would have to reflash the stock recovery and use that to flash stock? If I use ASUS's FlashTool would that reset everything back to stock?
Sent from my Samsung SM-G930T using XDA Labs
Click to expand...
Click to collapse
1. yes, you should flash before the stock recovery and then the stock rom
2. I don't know, i have never used asus flash tool, but i think that you should have anyway the stock recovery file
Again, i repeat, if someone know how copy the stock recovery, i can do it. My tablet have still the stock one and i could copy and post here !
I've tried to flash recovery image in adb fastboot and stock rom in asus flash tool but it doesn't work
Sent from my GT-I9300 using XDA-Developers mobile app
giorgiofolle said:
1. yes, you should flash before the stock recovery and then the stock rom
2. I don't know, i have never used asus flash tool, but i think that you should have anyway the stock recovery file
Again, i repeat, if someone know how copy the stock recovery, i can do it. My tablet have still the stock one and i could copy and post here !
Click to expand...
Click to collapse
bangdes said:
I've tried to flash recovery image in adb fastboot and stock rom in asus flash tool but it doesn't work
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
Gonna try this:
{Mod edit}
(use GTranslate)
Do you have a link to the stock recovery @bangdes?
Edit: I flashed this (https://www.asus.com/zentalk/tw/thread-147621-3-1.html) and now I just get an ASUS logo that eventually goes to the "Powered by Android" screen. Gonna try flashing stock now.
Edit 2: Gave me an error 7. Gonna try charging it up and flashing it again while I research what's up.
Edit 3: tried booting TWRP over stock recovery and adb sideloading it. finished saying total xfer: 1.09x and booted me to a black screen once I tried rebooting (TWRP gave me a No OS warning) saying it couldn't find drivers for Qualcomm HD-9008. ****, I think I just hard bricked my tablet yet again. Rebooted into driver signature disabled mode and it says "unknown device". Can't even turn off the damn thing.
xDark_ said:
Gonna try this:
{Mod edit}
(use GTranslate)
Do you have a link to the stock recovery @bangdes?
Edit: I flashed this (https://www.asus.com/zentalk/tw/thread-147621-3-1.html) and now I just get an ASUS logo that eventually goes to the "Powered by Android" screen. Gonna try flashing stock now.
Edit 2: Gave me an error 7. Gonna try charging it up and flashing it again while I research what's up.
Edit 3: tried booting TWRP over stock recovery and adb sideloading it, booted me to a black screen once I tried rebooting saying it couldn't find drivers for Qualcomm HD-9008. ****, I think I just hard bricked my tablet yet again. Rebooted into driver signature disabled mode and it says "unknown device". Can't even turn off the damn thing.
Click to expand...
Click to collapse
my z380kl is latest (2016) version and cannot enter to recovery stock, or maybe the stock recovery doesn't exist.. it's weird
bangdes said:
my z380kl is latest (2016) version and cannot enter to recovery stock, or maybe the stock recovery doesn't exist.. it's weird
Click to expand...
Click to collapse
The stock recovery is just an Asus logo I think. That's what it is for me with the flashed recovery using the link above.
Sent from my Samsung SM-G930T using XDA Labs
I've tried thousand time and no luck, I found the stock recovery from 4pda. But I forgot the link
Ok, lil update. Found out a potential unbricking method:
{Mod edit}
Also this thread is just dedicated to this brick: {Mod edit}}
And here's a few others who have the same issue: {Mod edit}
According to a guy who natively speaks Russian, this is a hardbrick that can't be repaired without sending it in to the OEM.
Kinda wish I had a little birdie that could fly into the ASUS office (I've been there, actually pretty nice. Lounge chairs with tablets and phones on display to play with while you wait, and a TV that was playing Finding Nemo in Chinese. Plus staff was nice enough, I just played dumb about what happened lol) and just tell me what exactly I can do to fix this. Even worse, the one year warranty is almost up so I'm gonna have to fork over cash if I send it in to be repaired AGAIN. This makes me want to send this tablet off to repair and sell it off for a NVIDIA Shield or something, Jesus. I got burned by Asus with the ZF2 and yet I still fell into this trap. Same with Samsung, I guess I'm just a masochist or something. Anyways, currently juggling fixing/rooting my S7 along with school work, so it'll be a few days or so until I can start experimenting with this. On a sidenote, damn the OPO is good. Still flies after three years of daily usage
Back to factory firmware
I found pretty good guide here to help restore the z380KL back to factory firmware.
{Mod edit}
squall77 said:
I found pretty good guide here to help restore the z380KL back to factory firmware.
{Mod edit}
Click to expand...
Click to collapse
If you're going to spam, at least make an unbricking tutorial.
xDark_ said:
If you're going to spam, at least make an unbricking tutorial.
Click to expand...
Click to collapse
I apologize if it looks like a spam, I am just suggesting that you should at least try to restore the stock system partition before trying to flash stock rom using TWRP as it does not work with the custom ROM system partition. As far as I have tried I couldn't boot into stock recovery, maybe it doesn't have one on my model. I can only boot into fastboot.
Best bet is to try to boot into custom recovery and restore the stock system partition from a backup file and then flash the stock rom and see whether it works.
squall77 said:
I apologize if it looks like a spam, I am just suggesting that you should at least try to restore the stock system partition before trying to flash stock rom using TWRP as it does not work with the custom ROM system partition. As far as I have tried I couldn't boot into stock recovery, maybe it doesn't have one on my model. I can only boot into fastboot.
Best bet is to try to boot into custom recovery and restore the stock system partition from a backup file and then flash the stock rom and see whether it works.
Click to expand...
Click to collapse
No, I'm asking you that if you're going to spam your own site then at least make a tutorial that's useful, not just a tutorial everyone who wants to flash CM13 already knows how to do.
hi, pls help.
never got to step 9.
after type fastboot boot twrpxx.xx.xx.img, stuck at waiting devices
hafizhans said:
hi, pls help.
never got to step 9.
after type fastboot boot twrpxx.xx.xx.img, stuck at waiting devices
Click to expand...
Click to collapse
Can you boot into ADB normally? Like type in adb devices before you type in any commands

[INACTIVE THREAD] Dirty Unicorns 14

Hello all,
THIS IS AN ANNOUNCEMENT, DISCUSSION AND INFORMATION THREAD FOR OFFICIAL DIRTY UNICORNS 14.x BUILDS FOR PIXEL 2 XL (taimen).
Special thanks to all who were and are involved in the development and also to the maintenance of this ROM.
Flashing instructions:
Go to TWRP
Factory reset
Flash ROM and TWRP zip
Reboot and enjoy!!
If on a previous DU build:
Go to TWRP
Flash ROM and TWRP zip
Reboot and enjoy!!
Note:
If you're going to flash magisk make sure you flash it after you've booted the OS once.
Reminder
Weeklies and official builds are signed with private keys. This means that if you’re on the first official build or last week’s weekly, you can dirty flash this official build. If you’re on anything other than that and want to use this build you MUST perform a full wipe in recovery. If you decide to disregard this and flash this build or a weekly on top of anything, you will not be able to boot. Have fun looking at a black screen
ANY BUGS MAY BE DISCUSSED HERE OR WITH THE DEVELOPMENT TEAM ON THEIR TELEGRAM CHANNELONLY IF YOU HAVE CLEAN FLASHED
Reserved
its an excellent rom! i helped test here n there n can confirm its almost completely bug free
elliwigy said:
its an excellent rom! i helped test here n there n can confirm its almost completely bug free
Click to expand...
Click to collapse
Can you tell how is the camera quality on that?
And they have listed audi during video is janky is that for stock camera or for apps like whatsapp and snapchat too?
Sent from my Google Pixel 2 XL using XDA Labs
Been waiting very impatiently for this lol
Prattham said:
Can you tell how is the camera quality on that?
And they have listed audi during video is janky is that for stock camera or for apps like whatsapp and snapchat too?
Sent from my Google Pixel 2 XL using XDA Labs
Click to expand...
Click to collapse
Just might be seldom janky...not all the time...I've tested stock DU cam, WhatsApp, Facebook, Instagram.... all working fine on all 3 different occasions:good:
Cam quality is as good as stock
No hangups...lags...or other issues
I will be using it as my daily driver
amandeepparmar said:
Just might be seldom janky...not all the time...I've tested stock DU cam, WhatsApp, Facebook, Instagram.... all working fine on all 3 different occasions:good:
Cam quality is as good as stock
No hangups...lags...or other issues
I will be using it as my daily driver
Click to expand...
Click to collapse
Can you post screenshot of the du tweaks that are currently in the rom?
Sent from my Google Pixel 2 XL using XDA Labs
Prattham said:
Can you post screenshot of the du tweaks that are currently in the rom?
Sent from my Google Pixel 2 XL using XDA Labs
Click to expand...
Click to collapse
DU Tweaks...check screenshots attached
amandeepparmar said:
DU Tweaks...check screenshots attached
Click to expand...
Click to collapse
Good
What steps did you followed to install?
Cheers ?
Sent from my Google Pixel 2 XL using XDA Labs
amandeepparmar said:
DU Tweaks...check screenshots attached
Click to expand...
Click to collapse
Factory reset in twrp. flash rom and twrp. Setup phone and flash afterwards kernel and magisk if needed
Anyone know if it has support for esim on Fi?
Flashing this will remove TWRP and Magisk. Just wanted to throw that out there.
MacTheRipperr said:
Flashing this will remove TWRP and Magisk. Just wanted to throw that out there.
Click to expand...
Click to collapse
Yes it will according to what I've been reading. I just got my pixel and have been trying to catch up with all the new a and b slots and how recovery is now baked into the boot.img, so from what I understand is that if you flash anything new such as rom or kernel a flash of both twrp and your choice of root is needed also or you will have stock recovery. So much different from my Nexus 6P. Lol. I have a lot to learn that's for sure
Sent from my Pixel 2 XL using XDA-Developers Legacy app
This rom is awesome !! DU always bring the goods
I've been running since yesterday. Spaceman killed it! Amazing work, where can we donate?
MacTheRipperr said:
Flashing this will remove TWRP and Magisk. Just wanted to throw that out there.
Click to expand...
Click to collapse
Yes but you can reflash twrp and magisk with absolutely no errors ,also twrp has no touch issues with the kernal that's already baked in rom!!!! It's a great rom!
Anyone else having trouble getting this to boot?
I've followed the instructions exactly. Reboot to TWRP (3.2.1-0), factory reset via the wipe menu, install the ROM .zip followed by the TWRP installer zip.
Go to reboot, TWRP asks me if I'm sure I want to do this as there's not an OS installed. I don't know what else to do other than say 'yes' and then it boots to the Google logo with the unlocked icon at the bottom of the screen and just hangs indefinitely at that point. Tried redownloading and recopying the ROM .zip to internal storage and all steps again too.
Any ideas? I've wiped this damn phone so many times and flashed the factory images so many times trying to get a custom ROM to work I'm about to give up. And my phone seems to damn janky where sometimes it does that same freeze on boot (or freezes on the TWRP splash screen) but then a quick reboot will fix it. Doesn't make any sense.
ohlin5 said:
Anyone else having trouble getting this to boot?
I've followed the instructions exactly. Reboot to TWRP (3.2.1-0), factory reset via the wipe menu, install the ROM .zip followed by the TWRP installer zip.
Go to reboot, TWRP asks me if I'm sure I want to do this as there's not an OS installed. I don't know what else to do other than say 'yes' and then it boots to the Google logo with the unlocked icon at the bottom of the screen and just hangs indefinitely at that point.
Any ideas? I've wiped this damn phone so many times and flashed the factory images so many times trying to get a custom ROM to work I'm about to give up. And my phone seems to damn janky where sometimes it does that same freeze on boot (or freezes on the TWRP splash screen) but then a quick reboot will fix it. Doesn't make any sense.
Click to expand...
Click to collapse
I went back to latest stock using deuces script. Boot twrp. Flash twrp then the rom...boot the rom. Go back into twrp and flash magisk
I had no problems getting it to boot, I followed the op. Factory reset, flash ROM, flash magisk, flash twrp and boot into system. It booted right up no problems
Sent from my Pixel 2 XL using XDA-Developers Legacy app
Reuben_skelz92 said:
I went back to latest stock using deuces script. Boot twrp. Flash twrp then the rom...boot the rom. Go back into twrp and flash magisk
Click to expand...
Click to collapse
Did you let the phone do it's initial boot after deuce's script ran? Or just stayed in fastboot mode, fastboot booted to TWRP, and flash the ROM and TWRP installer zip?
Also, did you format userdata when given the option in deuce's script? And you flashed TWRP before the ROM? I was under the understanding that the ROM flash would erase the TWRP install.
EDIT: I didn't format userdata, didn't reboot afterwards (just booted straight into TWRP and proceeded), and flashed TWRP before ROM and now it is indeed booting. Just need to figure out now whether or not TWRP is still installed. Many thanks! Deuce's must have fixed something I must have janked I guess.
EDIT2: Yeah appears TWRP should be flashed after the ROM not (just) before like the DU post says. I'm back to stock recovery afterwards.

Phone booting back to TWRP

Hi everyone,
I'm rooted. I flashed the Beta 3 rom and TWRP. Then, I rebooted into TWRP and flashed Magisk v18. Now, my phone spins on the boot animation screen for about a minute, then reboots into TWRP. Any ideas what I should do? I've tried wiping cache, but still the same issues.
ledvedder said:
Hi everyone,
I'm rooted. I flashed the Beta 3 rom and TWRP. Then, I rebooted into TWRP and flashed Magisk v18. Now, my phone spins on the boot animation screen for about a minute, then reboots into TWRP. Any ideas what I should do? I've tried wiping cache, but still the same issues.
Click to expand...
Click to collapse
Same happened to me a few days ago and had to reflash full rom. PC still recognized device so I placed os on root of device and flashed. Unfortunately it wiped the device but at least it worked.
PapaMag said:
Same happened to me a few days ago and had to reflash full rom. PC still recognized device so I placed os on root of device and flashed. Unfortunately it wiped the device but at least it worked.
Click to expand...
Click to collapse
So you had to wipe everything?
ledvedder said:
Hi everyone,
I'm rooted. I flashed the Beta 3 rom and TWRP. Then, I rebooted into TWRP and flashed Magisk v18. Now, my phone spins on the boot animation screen for about a minute, then reboots into TWRP. Any ideas what I should do? I've tried wiping cache, but still the same issues.
Click to expand...
Click to collapse
I don't recommend updating that way. For me I flashed a patched boot.img from TWRP and it worked.
ledvedder said:
So you had to wipe everything?
Click to expand...
Click to collapse
When I flashed 9.0.11 again it wiped the device yes.
_Masked_ said:
I don't recommend updating that way. For me I flashed a patched boot.img from TWRP and it worked.
Click to expand...
Click to collapse
Obviously you are smarter than me. Thanks for the tip
PapaMag said:
Obviously you are smarter than me. Thanks for the tip
Click to expand...
Click to collapse
No problem, happy to help. By patched boot.img I mean the boot.img that was patched by Magisk.
_Masked_ said:
No problem, happy to help. By patched boot.img I mean the boot.img that was patched by Magisk.
Click to expand...
Click to collapse
Where can I get that boot.img file?
Sent from my ONEPLUS A6013 using Tapatalk
ledvedder said:
Where can I get that boot.img file?
Sent from my ONEPLUS A6013 using Tapatalk
Click to expand...
Click to collapse
The stock boot.img file is extracted from OOS and the patched boot.img is after you patch it via Magisk.
_Masked_ said:
The stock boot.img file is extracted from OOS and the patched boot.img is after you patch it via Magisk.
Click to expand...
Click to collapse
How do I extract it?
Sent from my ONEPLUS A6013 using Tapatalk
Use this if you're on OOS 9.0.5/9.0.6/9.0.7, but if you are on a higher OOS then you need to grab your stock boot.img for 9.0.10 from here and 9.0.11 from here, and patch it yourself using the instructions below.
Connect your phone to your PC using the OnePlus Cable
Reboot to Bootloader using "adb reboot bootloader" on PC while your phone is in TWRP
Rename stock boot .img file to boot.img on PC
Use "fastboot boot boot.img" on PC while your phone is in Fastboot Mode / Bootloader
Follow this guide once you are done with the above steps to root your phone with Magisk and actually boot.
I am in the same situation.
1) Got the phone. Unlocked with out-of-the-box firmware. Put TWRP on it, Magisk. All worked like a dream.
2) Time passed, I tried to play Fortnite a bit, which kicked me out due to root. Had to use Magisk Canary. Still, NO issues, all superb!
3) New firmware. The December one. Kept postponing it, but after like 2 weeks, I was like, meh, why not. Big mistake.
From this point on, I cannot root no matter what I try. As soon as I flash Magisk, it will keep booting back to TWRP.
I have even tried to grab the Canary ZIP to flash. Nothing. Tried flashing back the full base update file from OnePlus, then root. Nothing.
It's like an endless loop.
To be fair, I only use root / magisk because I need call recording. Sadly, it's been killed in Android 9, but OnePlus has a hidden feature for this. Unfortunately you have to use either ADB on each boot, or use Magisk to enable it and save you time, hassle.
Anyone has any idea, shoot.
This is a 100% unbranded, OnePlus-store-bought 8GB/128GB 6T model.
Ps.: IF you ever get stuck in this loop - you can boot your phone by using the original "boot.img".
You can grab it here:
https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482
To boot it, simply:
1) Enter Bootloader where you can use fastboot (NOT TWRP!).
2) Use `fastboot boot boot.img`
3) Your phone now will boot up.
h8Aramex said:
I am in the same situation.
1) Got the phone. Unlocked with out-of-the-box firmware. Put TWRP on it, Magisk. All worked like a dream.
2) Time passed, I tried to play Fortnite a bit, which kicked me out due to root. Had to use Magisk Canary. Still, NO issues, all superb!
3) New firmware. The December one. Kept postponing it, but after like 2 weeks, I was like, meh, why not. Big mistake.
From this point on, I cannot root no matter what I try. As soon as I flash Magisk, it will keep booting back to TWRP.
I have even tried to grab the Canary ZIP to flash. Nothing. Tried flashing back the full base update file from OnePlus, then root. Nothing.
It's like an endless loop.
To be fair, I only use root / magisk because I need call recording. Sadly, it's been killed in Android 9, but OnePlus has a hidden feature for this. Unfortunately you have to use either ADB on each boot, or use Magisk to enable it and save you time, hassle.
Anyone has any idea, shoot.
This is a 100% unbranded, OnePlus-store-bought 8GB/128GB 6T model.
Ps.: IF you ever get stuck in this loop - you can boot your phone by using the original "boot.img".
You can grab it here:
https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482
To boot it, simply:
1) Enter Bootloader where you can use fastboot (NOT TWRP!).
2) Use `fastboot boot boot.img`
3) Your phone now will boot up.
Click to expand...
Click to collapse
Try this.
ledvedder said:
How do I extract it?
Sent from my ONEPLUS A6013 using Tapatalk
Click to expand...
Click to collapse
Plug your phone into your PC
Use this command in TWRP's Terminal and type this:
Code:
dd if=/dev/block/bootdevice/by-name/boot of=boot.img
Copy it from your phone to your PC (in the directory your command prompt is in) and use the command:
Code:
fastboot boot boot.img
TWRP doesn't work
Hi there,
Just like you I have installed twrp-3.2.3-x_blu_spark_v9.86_op6 TWRP recovery on my phone to flash custom ROM (as recommneded by this ROMs list), however, it doesn't work. Like, no matter whether you I to flash unofficial or official custom ROM, it says that 'Something isn't right'. I think there's some problem within this recovery. Hoping for good.
dgdeepak000 said:
Hi there,
Just like you I have installed twrp-3.2.3-x_blu_spark_v9.86_op6 TWRP recovery on my phone to flash custom ROM (as recommneded by this ROMs list), however, it doesn't work. Like, no matter whether you I to flash unofficial or official custom ROM, it says that 'Something isn't right'. I think there's some problem within this recovery. Hoping for good.
Click to expand...
Click to collapse
Flash the CORRECT one, for the OnePlus 6T. Not for the OnePlus 6.

[Solved] LG G4c H525n twrp bootloop

Problem caused: Factory reset in custom ROM, causing the phone to boot into twrp (even when plug in charger)
Method: refer to post #6 below
Anghirrim_shared_drive (Maintained by Anghirrim)
OP: Tried to perform a factory reset on LOS 14.1, it didn't go as plan. The phone boots into twrp, after I tried to flash LOS 14.1 over MM_rootable. The phone keeps booting into twrp, even though there is a ROM installed.
I assume I messed my boot partition tho?
Did more searching on this issue, from other model of phone also experiencing similar issue. It was a twrp bootloop.
my best bet is to grab a boot.img and flash it.
@Anghirrim sorry to interupt you, but do you have any method for fixing this?
Currently stuck at twrp. even I tried to boot into system/ download mode/ bootloader etc. It just bring me back to twrp. Couldn't use LGUP becoz I can't get into download mode. now I stuck with a phone with only twrp.
Tried flashing MM_flashable and return flashed successfully, but still boot into twrp.
Edit: Tried to plug my phone into a charger, brings me into twrp
purpleish said:
@Anghirrim sorry to interupt you, but do you have any method for fixing this?
Currently stuck at twrp. even I tried to boot into system/ download mode/ bootloader etc. It just bring me back to twrp. Couldn't use LGUP becoz I can't get into download mode. now I stuck with a phone with only twrp.
Tried flashing MM_flashable and return flashed successfully, but still boot into twrp.
Edit: Tried to plug my phone into a charger, brings me into twrp
Click to expand...
Click to collapse
Hi, did you try to factory reset it under stock flashable firmware ? Because if you did so, it will bootloop into TWRP trying to reach stock recovery.
Anghirrim said:
Hi, did you try to factory reset it under stock flashable firmware ? Because if you did so, it will bootloop into TWRP trying to reach stock recovery.
Click to expand...
Click to collapse
yea, I did.
I used the factory reset option in LOS 14.1
Is there a way to fix it?
purpleish said:
yea, I did.
I used the factory reset option in LOS 14.1
Is there a way to fix it?
Click to expand...
Click to collapse
Yes there is. Can you first have a look at my Google Drive? I think I uploaded a .txt file with the instructions.
purpleish said:
yea, I did.
I used the factory reset option in LOS 14.1
Is there a way to fix it?
Click to expand...
Click to collapse
There is a TWRP bootloop fix .txt file on my Gdrive. Can you have a look at it and report if it works?
Anghirrim said:
Yes there is. Can you first have a look at my Google Drive? I think I uploaded a .txt file with the instructions.
There is a TWRP bootloop fix .txt file on my Gdrive. Can you have a look at it and report if it works?
Click to expand...
Click to collapse
Yes, It works. Thank you.
Updated title & OP
purpleish said:
Yes, It works. Thank you.
Updated title & OP
Click to expand...
Click to collapse
Side point, I personaly prefer AEX (AOSPExtended) over LOS.
Anghirrim said:
Side point, I personaly prefer AEX (AOSPExtended) over LOS.
Click to expand...
Click to collapse
0.o , could try that as well.
Flashing it after download is complete.
Edit, danm it O .o turns into
Any issue?
Anghirrim said:
Any issue?
Click to expand...
Click to collapse
didn't flashed yet. I would let you know after I flash it.
Anghirrim said:
Any issue?
Click to expand...
Click to collapse
Phone flashed, still trying out the ROM.
will give an update a week later
@Anghirrim Nice ROM, everything I wanted is included in the rom.
but I have some problem with magisk manager, it wasn't working. (coz I want to get root)
1. How to get twrp
2. and therefore flash magisk manager
Edit: Nah, just have to redo it. Everything was good.
Maybe one day I should port AEX to another phone (cough cough Galaxy S2 cough cough).

Categories

Resources