Hi, I've been trying to install android M 6.0 through TWRP, and somehow deleted the OS from my system. Now whenever I boot my device (Huawei P8-lite dual sim) it gets stuck on the Huawei-logo screen. I can get into fast boot& rescue mode and I can get into TWRP, but I don't know how to repair my phone from there.
You didn't make nandroid backup?
That would be great at this point
If you can get into recovery flash your rom back! It should be fine then
Sent from my C6903 using XDA-Developers mobile app
I found a 6.0 custom rom on here and installed it through TWRP and it works
Help
kevinvcj said:
I found a 6.0 custom rom on here and installed it through TWRP and it works
Click to expand...
Click to collapse
Could u send me a link to that ROM? i have the same problem but i can't find it :/ :crying:
Just try to turn it off, you will have 2sec black screen, then press Vol + and ON/Off and you will go to TWRP. From there is easy...
kevinvcj said:
I found a 6.0 custom rom on here and installed it through TWRP and it works
Click to expand...
Click to collapse
Hwhar rom It is tel me.
Related
Two-Click Unlock for Zenfone 2 official Android 6.0
original post in Taiwan Asus Zentalk by @shakalaca
**do it at your risk**
1.Your PC must be adb environment ready.
2.You should know how to get into stock bootloader.( press Power and Volume up together)
files needed:
1. Download unlock.bat and restore.bat from here.
2. Recomended TWRP for verification.(repacked)
steps:
1.Copy unlock.bat and restore.bat on to your PC.
2.Plug your device in PC, click unlock.bat. The program will enter bootloader mode, reboot and then unlock.
3.After it run through unlock, the device will indicate it will reboot in 5 second. **important** PRESS VOLUME UP at the moment to enter bootloader.
4. If you miss step 3, the device will stuck in Asus logo. Don't worry. Just press POWER and VOLUME UP to enter bootloader.
5.When the device is in bootloader, click restore.bat Wait for the reboot and you are done unlock.
6.To verify unlock status, flash the recommended TWRP.
Good luck and all credits to @shakalaca
Is it the same as the unofficial method for bootloader unlock? also is there a way to relock bootloader like flashing it again over MM Beta?
Sent from my ASUS_Z00AD using XDA-Developers mobile app
Flynhx said:
Is it the same as the unofficial method for bootloader unlock? also is there a way to relock bootloader like flashing it again over MM Beta?
Sent from my ASUS_Z00AD using XDA-Developers mobile app
Click to expand...
Click to collapse
Different by the looks , the date gives it away and not a temp twrp-- although i am going to find out in about 10 mins --lets hope this works :highfive:
Not working for me
says flashing droidboot .184
anyone got this to work ?
no recovery after trying this - got stock recovery back from here ok
mega:///#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw!ok8SQKII
timbernot said:
Different by the looks , the date gives it away and not a temp twrp-- although i am going to find out in about 10 mins --lets hope this works :highfive:
Not working for me
says flashing droidboot .184
anyone got this to work ?
no recovery after trying this - got stock recovery back from here ok
mega:///#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw!ok8SQKII
Click to expand...
Click to collapse
According to @shakalaca, the restore process get back to 6.0 ifwi. After the unlock, the droidboot stay at .184 alright.
What is the status of your device before unlock, rooted or unrooted? Can you flash the twrp provided by him ?
samcjtsai said:
According to @shakalaca, the restore process get back to 6.0 ifwi. After the unlock, the droidboot stay at .184 alright.
What is the status of your device before unlock, rooted or unrooted? Can you flash the twrp provided by him ?
Click to expand...
Click to collapse
my device doesnt get to this part > 3.After it run through unlock, the device will indicate it will reboot in 5 second. **important** PRESS VOLUME UP
but stays on > press any key to finish...... which then closes the window
I flash twrp,says ok but reboots back to bootloader after restarting recovery.
flashed back stock recovery and factory reset for another attempt...lets see
Works good to me. Miss that step where I supposed to pressed vol up button and phone stuck on white splash screen. Force off and then go to bootloader, then execute restore.bat and done. After that root and exposed and then I mess up some another stuff so need to flash 6.0.1 MOFD_SDUPDATE manually from stock recovery. Everything pass smoothly but root and exposed framework disappeared obviously. Root and exposed again no problems
cannot flash custom roms???
Hi everyone,
I successfully unlocked my bootloader from MM beta, I successfully flashed the recommended twrp recovery, I successfully flashed rom and gapps but when I reboot the phone goes back to twrp recovery. Anyone else facing the same issue? Or is it impossible to flash custom roms?
Yousvel said:
Hi everyone,
I successfully unlocked my bootloader from MM beta, I successfully flashed the recommended twrp recovery, I successfully flashed rom and gapps but when I reboot the phone goes back to twrp recovery. Anyone else facing the same issue? Or is it impossible to flash custom roms?
Click to expand...
Click to collapse
ATM this unlock can backup/restore stock rom in recommended twrp, but can't flash CM. Seems its boot.img need to be repacked.
Yousvel said:
Hi everyone,
I successfully unlocked my bootloader from MM beta, I successfully flashed the recommended twrp recovery, I successfully flashed rom and gapps but when I reboot the phone goes back to twrp recovery. Anyone else facing the same issue? Or is it impossible to flash custom roms?
Click to expand...
Click to collapse
Same problem here
samcjtsai said:
ATM this unlock can backup/restore stock rom in recommended twrp, but can't flash CM. Seems its boot.img need to be repacked.
Click to expand...
Click to collapse
how can i flash a stock 5.0 rom from the recommended twrp? I tried to do that but it doesn't work. Do I have to flash a stock 6.0.1 beta rom?
It worked perfectly!Thanx a mill!
Can't flash TWRP although the splash screen became white after unlock.bat -> unlocked
After restore.bat the splash screen went black as usual. Then I flash the recommended TWRP. But when I choose recovery mode in fastboot, it reboot to fastboot. When I adb reboot recovery in Android OS, it reboot to stock recovery. Can anyone help me to solve this problem?
I'm running .69 MM beta, I replaced the .54 fastboot image in the package with .69 one. Does this effect the unlock state?
timbernot said:
Different by the looks , the date gives it away and not a temp twrp-- although i am going to find out in about 10 mins --lets hope this works :highfive:
Not working for me
says flashing droidboot .184
anyone got this to work ?
no recovery after trying this - got stock recovery back from here ok
mega:///#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw!ok8SQKII
Click to expand...
Click to collapse
Edit Unlock.bat, find "sleep 3" in the line 24 and change it to "sleep 25" to increase the waiting time to detect back the fastboot after your phone reboots...
This fixed me the issue.... try it...
can i flash supersu to become root after unlock with this method?
ponnuvelpandian said:
Edit Unlock.bat, find "sleep 3" in the line 24 and change it to "sleep 25" to increase the waiting time to detect back the fastboot after your phone reboots...
This fixed me the issue.... try it...
Click to expand...
Click to collapse
Thanks :good: , i`ll keep that in mind when the time comes back on 5 atm
kamyk70 said:
Works good to me. Miss that step where I supposed to pressed vol up button and phone stuck on white splash screen. Force off and then go to bootloader, then execute restore.bat and done. After that root and exposed and then I mess up some another stuff so need to flash 6.0.1 MOFD_SDUPDATE manually from stock recovery. Everything pass smoothly but root and exposed framework disappeared obviously. Root and exposed again no problems
Click to expand...
Click to collapse
How you root your MM beta?, please tell me, i wanna root mine too
Sent from my ASUS_Z008D using XDA-Developers mobile app
Bring twrp zip android 6 please.
Can anyone backup with TWRP and upload?
Factory reset, backup with TWRP, and upload[emoji6]
Gesendet von meinem ASUS_Z00AD mit Tapatalk
KarloHD said:
Bring twrp zip android 6 please.
Can anyone backup with TWRP and upload?
Factory reset, backup with TWRP, and upload[emoji6]
Gesendet von meinem ASUS_Z00AD mit Tapatalk
Click to expand...
Click to collapse
Are you going to post this in EVERY tread?
Sent from my ASUS_Z00A using Tapatalk
Now, if we can unlock stock 6.0, can anyone confirm me if we can directly flash custom roms without downgrading to 5.0
after running restore it worked, however when running unlock.bat, I get permission denied and the device goes tinto bootloader bootloop, and I had the device rooted and bootunlocked already in lollipop, I wonder why that happens?
I was running on an older version of TWRP. Also I had uprooted my phone recently due to battery heating and media server issue. I flashed the new zip file but did not clear cache after flashing instead directly booted into system. System boots perfectly but cannot load recovery as it gets stuck on splash screen( Lenovo logo). Please do help me.
Flash it back to older twrp version using fastboot.
Guys, hi
There is one more new problem. I tried to update the OTA update but got stuck at boot screen. It's not responding after the Lenovo logo. I think the issue is not having any recovery(custom nor stock). How to fix this issue? Please help me to
# Reset stock recovery or TWRP 3.0.2-0
# Update the OTA update( I badly want this as I saw that Resurrection Remix requires the device to presently run on stock Lollipop to update. I soo badly want to use CM13
Iamjomy said:
I was running on an older version of TWRP. Also I had uprooted my phone recently due to battery heating and media server issue. I flashed the new zip file but did not clear cache after flashing instead directly booted into system. System boots perfectly but cannot load recovery as it gets stuck on splash screen( Lenovo logo). Please do help me.
Click to expand...
Click to collapse
Use cwm ...its working 100% sure
ANDROiDCO said:
Flash it back to older twrp version using fastboot.
Click to expand...
Click to collapse
Thank you. But can you please tell how to do this via the flash boot. I haven't tried yet in a PC. I installed the older TWRP and now tried flashing the new version using my phone. Wouldn't I get stuck because none of the recoveries(custom and stock) are opening
can you boot into the system? if Yes then use rashr app and flash twrp's img file from the storage.. and reboot to recovery and u don't need to update to stock lollipop you can directly flash cm12.1 by ed300 and after booting into system once you can install any lollipop or marshmallow rom with the help of recovery. i advice you to not to do update as u r a root user.
varun4495 said:
can you boot into the system? if Yes then use rashr app and flash twrp's img file from the storage.. and reboot to recovery and u don't need to update to stock lollipop you can directly flash cm12.1 by ed300 and after booting into system once you can install any lollipop or marshmallow rom with the help of recovery. i advice you to not to do update as u r a root user.
Click to expand...
Click to collapse
Thank you bro. Yes I can boot into system. Actually I'm not root user anymore. I had heating issues with the battery earlier. After rooting media server started draining battery. So i uninstalled SuperSU.
Iamjomy said:
Thank you bro. Yes I can boot into system. Actually I'm not root user anymore. I had heating issues with the battery earlier. After rooting media server started draining battery. So i uninstalled SuperSU.
Click to expand...
Click to collapse
You first hv to root for the installation of recovery.. First root ur phone then install stock recovery.. Using flashify or rashr.
If you can boot into system, then you can use adb sideload to flash zips(recovery or rom).
For detailed info, google it or go to http://www.droidviews.com/sideload-roms-mods-using-adb-sideload/
If it doesn't work, root your phone and then install flashfire. Then use it to flash recovery.
varun4495 said:
You first hv to root for the installation of recovery.. First root ur phone then install stock recovery.. Using flashify or rashr.
Click to expand...
Click to collapse
Thanks bro. Is it bad to root using iRoot or KingRoot? Or should I do it using ADB?
@Iamjomy if you have pc then go for adb otherwise go for the latest version of kingoroot.. I rooted with kingroot.. No problem in that.. You can find that apk by searching on google.. !!
varun4495 said:
@Iamjomy if you have pc then go for adb otherwise go for the latest version of kingoroot.. I rooted with kingroot.. No problem in that.. You can find that apk by searching on google.. !!
Click to expand...
Click to collapse
Hello,
Thank you soo much. I flashed TWRP 2.8 using Flashify and it works. Actually I wanted to do a factory reset to solve "Unfortunately the process com.android.phone has stopped" issue. It wasn't allowing me to turn on my mobile data. I couldn't reset the phone too as a recovery was missing. Now the issue is fixed and I'm happy with it. Can I flash the TWRP 3.0.2-0 similarly using Flashify? Also please do suggest some good ROMS bro. Im still on the KitKat version( S040_150805)
Iamjomy said:
Hello,
Thank you soo much. I flashed TWRP 2.8 using Flashify and it works. Actually I wanted to do a factory reset to solve "Unfortunately the process com.android.phone has stopped" issue. It wasn't allowing me to turn on my mobile data. I couldn't reset the phone too as a recovery was missing. Now the issue is fixed and I'm happy with it. Can I flash the TWRP 3.0.2-0 similarly using Flashify? Also please do suggest some good ROMS bro. Im still on the KitKat version( S040_150805)
Click to expand...
Click to collapse
Recovery version are depended on the different andtoid versions.. 3.0.2 is for the LP and MM.. If u use custom roms then u can use that.. I dnt suggest you to use that as u r on the lollipop.. And the best roms are.. CM12.1, RR5.7.3, MOKEE, XOSP.. press thanks if i helped you. !!
Few day earlier my home button died , so i decided to change rom . After some tries with different roms it started to work again (finally settled for oxygenos) . I used that rom for quite some time before i got bored of oxygenos and decided to change it . But to my surprise i won't boot into recovery no matter what i try. I tried to upgrade or change it using flashify and other app ,still nothing happened. Finally i tried to flash recovery using computer , still it won't boot in recovery .
My boot loader is having unlocked status. I tried flashing different types and versions of recovery . Everytime i write command error comes and it won't flash . I searched my threads with suggestions of using specific recovery for oneplus 2 but none of them works.
Please help , My battery drains like sand from hand. I get less than 2.5 hours of screen time
What version of Android/oxygen os are you using??
sivacharan92 said:
What version of Android/oxygen os are you using??
Click to expand...
Click to collapse
lollipop
Oos 2.2.1
Ok.. Go into Fastboot mode.. If your bootloader is unlocked, flash twrp recovery 3.0.2-0.img.. You can download it from twrp website.. Hope you know how to flash a twrp recovery.
sivacharan92 said:
Ok.. Go into Fastboot mode.. If your bootloader is unlocked, flash twrp recovery 3.0.2-0.img.. You can download it from twrp website.. Hope you know how to flash a twrp recovery.
Click to expand...
Click to collapse
Tried it but doesn't work ....
Some TWRP recoveries don't work with earlier rom firmware. Try finding Twrp 2.8.6 or 2.8.7 and try flashing. Also wich version of windows are you using. I've had my fair share of problems with windows 10.
Best of luck
Hello ! So i'm bit stressed now cause i never had an unpullable battery before on my samsung.
So i just got from my cousin a galaxy s6 edge plus, and i want to root it. so installed odin and flashed twrp-3.1.0-0-zeroflte.img.tar
However now it kept being on the samsung logo. So i had to e press and hold the Volume down and Power/Lock keys on the device for 10–20 seconds to power it off. But it keeps rebooting, and now, it's only a black screen with a blue led. I don't know what to do, i'd really need your help. Thank you I'm so worried gosh.
update 1: i tried to force shut down by pressing the buttons and it used to display the samsung and carrier logo then be stuck on samsung logo, but now it just shows samsung galaxy, turn off and the recent apps et return buttons blinking. Kinda scary. I'm waiting for the battery to discharge, hopefully it will work I need your help
The zerolte is for the S6 EDGE, you want the zenlte
http://twrp.me/devices/samsunggalaxys6edgeplus.html
You should be able to hold vol down, home and power buttons to get into download mode to flash it.
Use the power and volume down button to force reset and when it does quickly press all 3.
Thank you for your time ! i did as you said, i entered twrp recovery mode and performed a wipe, but i'm still in a bootloop ! any ideas ?
EDIT : but i installed the new twrp over the old one might it be conflicting ?
I went back to 3.0.2.0 and don't have a bootloop issue anymore, it may be the latest update giving the issues.
Ehhh going back to the 3.0.2.0 didn't work either. I have the TWRP menu, have wiped, but i'm still in a bootloop. :/ I'm happy cause it's not bricked but i still use my phone...any help appreciated guys :<
So are you using a custom rom?
You can enter twrp to install/wipe etc?
nope i'm on stock rom and yeah i can enter twrp and install and wipe !
Like i just wanted to root my phone with stock rom, how can i achieve it ? :c
sleepyGrin said:
Like i just wanted to root my phone with stock rom, how can i achieve it ? :c
Click to expand...
Click to collapse
cf auto root can root and keep stock rom
oh nice i've just looked it up. How can i go from my current state to cf auto root ? RIght now it's boot loop with twrp, what can i do to go back to stock rom and use my phone again ? thanks
sleepyGrin said:
oh nice i've just looked it up. How can i go from my current state to cf auto root ? RIght now it's boot loop with twrp, what can i do to go back to stock rom and use my phone again ? thanks
Click to expand...
Click to collapse
Well you can download your stock rom for your model, mine is sm-g928r4 not sure what yours is but ya. Then use odin to flash the stock img and then use cf auto root to get root.
i flashed my rom but it failed and now im stuck with samsung smart switch but its not working, i don't know what to do really..
sleepyGrin said:
i flashed my rom but it failed and now im stuck with samsung smart switch but its not working, i don't know what to do really..
Click to expand...
Click to collapse
Just download the latest firmware for your smartphone (SM-G928x (Replace the x with your spessific model number on the back)) and your country from sammobile.com and flash it through odin. This should wipe your data and perform a clean reflash of the stock ROM. After that procedure it will take about 10 minutes to boot and it should be working again
sammobile is pretty slow is SamFirm okay ? And thanks i'l ltry this !
ok so i tried to flash the rom from sam firm for my SM-G928F SFR but it just shows up with a failed... any ideas ?
I had an issue trying to flash stock Rom back, I was trying to flash an older version and it failed, i downloaded the latest for my model and it worked. Are you sure you downloaded the right one?
sleepyGrin said:
oh nice i've just looked it up. How can i go from my current state to cf auto root ? RIght now it's boot loop with twrp, what can i do to go back to stock rom and use my phone again ? thanks
Click to expand...
Click to collapse
I presume you ave the SM-G928F S6 Edge +. Just flashing TWRP will cause boot loop. Please see post and flash via twrp the section 12. This should stop the bootloop. Allways remember never turn of OEM locking if you have a custom recovery.
" If you only want a bootable system partition or readable data in TWRP:
Download dm-verity and force encryption disabler.
Without exiting TWRP, transfer no-verity-opt-encrypt.zip to your device over MTP* and flash it using [Install] in TWRP.
** If your internal storage is encrypted, you will need to use adb sideload instead."
https://forum.xda-developers.com/s6...ecovery-official-twrp-galaxy-s6-edge-t3354492
Hi there!
Well as the title says, it is an issue...
Here, i'll explain: If i flash the 7.1.1 ftf and boot it afterwards it works. Okay, then i put the phine into fastboot mode and on my computer i flash the advanced stock kernel and twrp 3.1.1.0 afterwards. And i boot the phone and phone starts like usually, but if i boot to recovery it does boot to twrp and all is working. But if i rebooted from twrp to system it says Sony logo > reboot > (this message is there always, i unlocked the bl) this device has been unlocked and phone boots in 5 sec. > the boot image is broken and phone shuts down. But i can still boot to twrp when i use pwr vol down and pushing vol buttons like usually... And if i install a custom rom, in my case paranoid android 7.2.3 it works. I just wanted to install magisk on the stock 7.1.1 and keep the slo mo stuff and so on... I have tried 6.0.1 and did the same stuff and it worked. I want my XZ3c back so bad...
XperiaGUY47 said:
Well as the title says, it is an issue...
Here, i'll explain: If i flash the 7.1.1 ftf and boot it afterwards it works.
Click to expand...
Click to collapse
"Advanced stock kernel
-For 34.1.A.1.198"
Click to expand...
Click to collapse
That's a MM kernel, mod your own using Trim Area Proof Of Concept and try again.
SXUsr said:
That's a MM kernel, mod your own using Trim Area Proof Of Concept and try again.
Click to expand...
Click to collapse
But does the XC Genesis Kernel v. 1.06 work with it?