Related
Hi,
my new Win7 premium home (64bit) PC can't connect with my HD2 (stock rom). Driver install always ends with a access denied. Outlook is 2007.
In the past I had no (only few) problems with XP(SP3) and Outlook 2003 and my hd2 and my X1.
I uninstalled and reinstalled the whole win mob sw several times.
What can I do - any ideas?
regards
Are you trying to connect with Activesync or disc drive?
I couldn't install active sync under win7. I had to install 'win mobile device manager 6.1' which ist ok but driver install always says 'access denied'.
The hole thing should last about 20 seconds but I'm working on it severel hours
Ideas would be wellcome.
Edit. My hd2 has settings 'active sync' with 'fast synchronisation off'. I hpe this is correct in english, my settings are german.
i'm usign Windows 7 Pro x64 with Office 2007.
No problems at all.
Do you have enough priviledge when you install drivers?
Did you download the correct driver package?
I'm logged in as admin and I loaded the package from MS (drvupdate-amd64.exe 12.749kB).
Edit: I found a 'trick' in another forum (search registry for 'KLFLTDEV' and delete this branch - HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Class UpperFilters in Portable Device) which didn't work for me.
Mine worked fine, but I'm not sure if I had to run as admin or not. Did you try the whole right click-run as admin option? Or in properties set the compatibility to something else? Otherwise, there may be a problem with your phone's software and a hard reset could fix that. With a good backup program, it doesn't suck as bad as it sounds. =p
Hi,
hard reset of my hd2 is not a problem.
I have a unknown device under portable devices and after driver update I get a 'driver found' and afterwards an 'access denied'.
after googling this turned up in microsoft forum about getting "access is denied" error when installing drivers:
This issue is caused by the monitor driver update fails to access following
files.
C:\Windows\inf\infpub.dat
C:\Windows\inf\infstor.dat
C:\Windows\inf\infstrng.dat
C:\Windows\inf\drvindex.dat
C:\Windows\inf\INFCACHE.1
Please follow these steps to set the permission of these files.
1. Negative to C:\Windows\inf\
2. Right click infpub.dat and choose properties.
3. Select Security tab, click Edit.
4. Click the current User Account name, check Full Control checkbox as Allow.
Note : If the current User Account name is not listed, please click “Add”,
following the “Enter the object name to select” title, type in the current
User Account name and then click Ok.
5. Click Apply, click OK.
Please repeat the above steps with infstor.dat, infstrng.dat, drvindex.dat
and INFCACHE.1.
After that trying to install the driver once again.
Click to expand...
Click to collapse
Hi,
I found the mentioned fiiles in \windows\system32\driverstore and did what you told me - but no success Access denied.
thanks
I also have Win 7, and Windows Mobile Device Center. I have had problems with Activesync before, but was due to "Enable faster data syncronization" being checked. However, I was always able to connect with the computer through "Disc Drive" option. This won't solve your problems entirely, but you can find out if your computer will recognize the phone at all.
dmsc said:
Hi,
I found the mentioned fiiles in \windows\system32\driverstore and did what you told me - but no success Access denied.
thanks
Click to expand...
Click to collapse
did you take the ownership of that directory and files?
thats mysterious...i have also win7 x64 and outlook 2007.
when i first connect my hd2, it automatically downloads WMDC and hd2 drivers...
did you try different usb ports?
DN41
richteralan said:
did you take the ownership of that directory and files?
Click to expand...
Click to collapse
Yes I did and I checked it too.
I tried all again and recogniced that after taking the ownership all is fine but a moment later the ownership disappears again. So how can I do this permanantly?
And yes I tried different USB boards.
thanks
THIS IS THE ANSWER
I had same issues and resolved it by using the MITTY without driver solution!!
http://forum.xda-developers.com/showthread.php?t=623356
It works - just follow all the instryctions and load all drivers they say!
Mr Kipper said:
THIS IS THE ANSWER
I had same issues and resolved it by using the MITTY without driver solution!!
http://forum.xda-developers.com/showthread.php?t=623356
It works - just follow all the instryctions and load all drivers they say!
Click to expand...
Click to collapse
Thanks,
but this isn't the solution I'm looking for because this is to much modification of my hd2. I just want to install mobile device center 6.1 to win7 64bit + driver.
regards
I never had any issues getting Win7 pro 64 and Outlook 7 / 2010 syncing up.
I did change my windows setup a fair abit. If you are not full admin that could be it. Did you do a fresh windows install or upgrade an existing install to windows 7?
Taking control of folders can be problematic, even with a full install. I still have a few folders being annoying but most of them I got working.
There is a hidden full access admin account hidden on the computer, you might try enabling that and giving it a go. Or to see if it can bump your access levels up.
1. Click on “Start button -> All Programs -> Accessories“. Right-click on “Command Prompt” and select “Run As Administrator“. If you are prompted to enter password, enter the password and continue. You can also open Command Prompt in Administrator mode by typing “cmd” in Startmenu Search box and press “Ctrl+Shift+Enter“.
2. Now provide following command:
net user administrator /active:yes
3. Thats it. The Administrator account will be enabled. If you want to disable it again, simply replace "yes" with "no" in above command.
Click to expand...
Click to collapse
I saw your post about logging in as admin, but that one is even more admin so it might do something. Folder control is also a big deal with windows now so be sure you have control.
Did you sync your phone with older computers? I cant remember if this phone had issues with multiple PCs in its sync list or not, I only use two and thats what my old one would only allow.
10332007 said:
Did you do a fresh windows install or upgrade an existing install to windows 7?
Click to expand...
Click to collapse
It is a brand new PC and Win7 is a fresh install.
10332007 said:
There is a hidden full access admin account hidden on the computer, you might try enabling that and giving it a go. Or to see if it can bump your access levels up.
I saw your post about logging in as admin, but that one is even more admin so it might do something. Folder control is also a big deal with windows now so be sure you have control.
Click to expand...
Click to collapse
I guess this is my problem.
10332007 said:
Did you sync your phone with older computers? I cant remember if this phone had issues with multiple PCs in its sync list or not, I only use two and thats what my old one would only allow.
Click to expand...
Click to collapse
I did sync with my older PC with WinXP Sp3 and Outlook 2003. With active sync I had only minor problems. Maybe it would be the same with Win7 and Outlook 2007 - but I can't install the driver.
Thanks for your suggestions, I'll give them a try.
regards
Sorry,
but I can't get ownership of \windows\system32\driverstore. I guess it would be neccessary but I get always 'access denied' - even I'm logged in as administrator. Why I can't get ownership of this directories/files ?
Sh.t Win7
I'm have the same issue also with Device Center not recognizing my HD2. It will recognize the HD2 as a "Disk Drive" but not as "Active sync" I tried with/without the underbox checked.
I've tried all of my USB ports. I just tried the cmd: "net user administrator /active:yes", but I get "System error 5 has occurred. Access denied"
I'm running windows 7 Ultimate 64bit-Outlook 2007
Hi,
I did it.
Unfortunately I don't know exactly what I did. Something like get ownership of some Files in \windows\system32 (belonging to windows mobile) and getting ownership of some registry entries (belonging to windows mobile) - only black despair.
After restart I changed the usb port and - 30 seconds later sync was running
I'm happy now but can't tell you exactly what to do.
regards
my lg optimus wont work on windows phone device manager.
windows phone device manager says my phone is connected by usb but when i try to use the programe,it says my phone needs to be registerd or unlocked. can anyone help please.
mickhumm said:
my lg optimus wont work on windows phone device manager.
windows phone device manager says my phone is connected by usb but when i try to use the programe,it says my phone needs to be registerd or unlocked. can anyone help please.
Click to expand...
Click to collapse
Just to clear the obvious, is your device dev unlocked?
/J
jontatas said:
Just to clear the obvious, is your device dev unlocked?
/J
Click to expand...
Click to collapse
that dont matter anyway. The filesystem is locked and with that ****ty OS its not possible to do, work, play...nothing...oh yes...sorry...you candownload and pay for that ****ty, useless Apps floating around
ziko said:
that dont matter anyway. The filesystem is locked and with that ****ty OS its not possible to do, work, play...nothing...oh yes...sorry...you candownload and pay for that ****ty, useless Apps floating around
Click to expand...
Click to collapse
Naturally it matters, if it's not dev unlocked you can't do anything at all with WPDM. And yes as of yet I haven't seen anyone getting full file access on the Optimus 7, don't know if anyone is actually working on it either.
As for WP7 being a ****ty OS that stands for you, I won't even comment on that.
And the apps, I'd say there are even more useless apps floating around for Android, I chose not to download them neither for Android, nor WP7.
/J
jontatas said:
As for WP7 being a ****ty OS that stands for you, I won't even comment on that.
/J
Click to expand...
Click to collapse
u are right, my mistake: OS is great, the best ever, but MS make it looks and feel so ****ty. All the restrictions and dictation, tutelage of the users make it so worthless, even for the developer.
A question: how many new devices are out in the past few months, to say so, last 5 months???????????????????
Compare the price, thats the best indicator on the market, 6 months ago my Optimus was 640.-CHF and today????
237.-CHF ist the last price, from today, on Toppreise.ch
Its a really great device, great hardware, speed, all is perfect....but the whole thing is useless, aside from calling and paying money on Marketplace for worthless, useless ****.
Thats my opinion.
Unlock optimus 7 cannot connect to wpdm
hi, I have a problem with Windows Phone Device manager. I have just bought a new Optimus 7 in June, I upgraded it to NODO, I unlock by MFG method, I installed SDK.
When I connect my phone to WPDM, it don't recognise my phone, it install TouchXperient on my phone but it cannot launch TouchXperient, although it says that my phone plugined via USB, but when I try to connect, synch, it notice that "unable to connect device". Zune connect normally.
I tried to open TouchXperient manually, and connect to WPDM but I tried in vain, nothing happened.
Can anybody help me? I am using Windows 7 Professional with MSE. Is there anything I need to install before use WPDM, pls list for me.
Run touch experience on your phone before you try to connect. It should connect then. It does for me.
bonez025 said:
Run touch experience on your phone before you try to connect. It should connect then. It does for me.
Click to expand...
Click to collapse
No matter how I tried, my phone don't connect with WPDM. should I reinstall Windows 7?
brightheart8x said:
No matter how I tried, my phone don't connect with WPDM. should I reinstall Windows 7?
Click to expand...
Click to collapse
Make sure all requirements are met first.
Requirements:
* Registered or unlocked Windows Phone 7 device
* Windows Vista or Windows 7 32/64-bit
* .NET Framework 4.0
* Windows Phone Developer Tools
Hints: PLEASE READ CAREFULLY
You can initiate connection from both PC and device (tap PC Synchronization in TouchXperience to etablish connection from device). You can connect via USB or Wi-Fi, but the first time you have to connect via USB so WP Device Manager can deploy TouchXperience and your device can get your PC IP address.
In the current version you can't manually set the PC or phone IP address to connect, or change default ports.
Make sure port 8007 is not blocked by firewall on PC and port 8107 is reachable on device.
When WP Device Manager initiate a connection and can't connect to the phone, in case you are connected via USB it will launch TouchXperience, in other cases it will send a push notification to your phone asking you to manually launch TouchXperience
Some tasks requires your phone screen to be unlocked
It is not necessary to have Zune runing in order to use WP Device Manager.
If WP Device Manager does not start at all, make sure you installed all the requirements and try to reinstall full .NET Framework 4.0 and developer tools.
If you are not able to connect or if some features are not properly working, go to Settings in WP Device Manager, click Restore default settings and eventually restart your PC.
If you get a message "TouchXperience version 1.2.3.0 or later is required" it means Device Manager is not able to communicate with TouchXperience, to solve the problem, go to Settings in WP Device Manager, click Restore default settings and restart your PC. Try to temporarly disable your anti-virus or firewall programs to see if that's the problem. If nothing helps, download and open WPDeviceManagerFix.reg in attachment bellow and restart your PC
If you have connection problems, try the following may help: unplug/replug your phone, close or start Zune, restart WP Device Manager, make sure your device is detected by Zune, in worst case restart your PC.
WP Device Manager or some components of it may be considered as potential threat by anti-virus or firewall programs, this is a false alarm, you may need to add exceptions to your anti-virus or firewall may prevent WP Device Manager from working correctly.
WP Device Manger is automatically disconnected when you quit TouchXperience (for example when you launch an app or return to Start screen). This is not a bug, this is because TouchXperience is stopped due to the lack of native multitasking in WP7. To workaround you can enable multitasking in TouchXperience settings.
Tap on a menu title in TouchXperience and the main menu will show up
If you want to take screenshots of an other application on the phone you need to enable multitasking in TouchXperience settings
You can only access \Windows and \My Documents on non-HTC devices and some folders may appears empty. This is because only HTC devices have full file system access at the moment.
Applications installed with other tools than WP Device Manager are not recognized (they are identified by their id) on non-HTC device, for the same reasons than above. To solve the problem you can simply browse your original xap files, application info will be automatically cached and diplayed in the app manager.
Some application versions are incorrect. This is due to the fact that some developers does not update their application manifest with correct version number when they release new versions. To fix the problem you can check for app updates and click on Dismiss All assuming all your applicatons have been updated to their latest version.
You can't copy most of DLL and EXE in \Windows directory, this is simply because these are not files but modules.
You can check TouchXperience version in Settings or in WP Device Manager application list.
You should have a folder with device name in My Documents on your PC, place here the files you want to sync with the phone.
You can send toast notifications from any program on your PC using command line C:\Windows\WPDeviceManager\WPDeviceManager.exe /SendToast "message".
In order to use WP Device Manager from Windows Device Stage, you must have Windows 7 and driver signature verification disabled, unfortunately this is because Windows 7 recognize only digitally signed drivers.
Click to expand...
Click to collapse
What you actually want the wpdm. It does work as described above. but you do not have full access onto lg. from there it is totally useless so far. except the phone to get info. otherwise you're still nothing. So wait
gruss dante
Dante187 said:
What you actually want the wpdm. It does work as described above. but you do not have full access onto lg. from there it is totally useless so far. except the phone to get info. otherwise you're still nothing. So wait
gruss dante
Click to expand...
Click to collapse
Yes, ists useless at the moment...
...and i think in the future too.
We have to wait for a CRACK, HACK or whatever for that idiotic restriction from MS...
...or wait for another OS, Android is the same **** at the moment.
or you prefer to go back ti WinMo 6.x
A friend of mine develops applications and I just want to sideload a single application of his. My current computer is not running Windows 8 64-bit so I can't install the SDK. How can I register my phone so I can be granted the 2 application limit for the free developers?
I can't install the SDK
Click to expand...
Click to collapse
if you have window 7 you can install sdk, http://forum.xda-developers.com/showthread.php?t=2422751
Read the faq, its just about the go to thread for everything you need to know. If its not there, leave a reply in that thread.
For W7
http://arnoldvink.com/?dl=WP8SDKToolsLiteSetupAv10.zip
http://forums.arnoldvink.com/viewtopic.php?f=10&t=4
Oke its about another app, but if you place your friens app instead, it should be fine.
How to connect my Android device via file manager (personally I use FileMaster) to my Windows laptop? It requires a login and password that I haven't. Thanks.
beautifulsun said:
How to connect my Android device via file manager (personally I use FileMaster) to my Windows laptop? It requires a login and password that I haven't. Thanks.
Click to expand...
Click to collapse
You could see if ES File Explorer will do it, or you could set up a FTP server on your computer (FileZilla).
MrObvious said:
You could see if ES File Explorer will do it, or you could set up a FTP server on your computer (FileZilla).
Click to expand...
Click to collapse
OK, it works too in FileMaster, now I can access to my laptop, but a pass is mandatory? It can't be a no pass free login?
MrObvious said:
You could see if ES File Explorer will do it, or you could set up a FTP server on your computer (FileZilla).
Click to expand...
Click to collapse
No idea. Are you trying computername\username or just username? Windows likes to have a domain, even if it is just the local hostname of the computer. I work in an IT department so I see this kind of stuff a lot with *nix computers and Windows. Android is a version of Linux custom really.
Sent from my Nexus 5 using xda app-developers app
Tried this?
Open the app, turn on the switch, go to computer, download filezilla, type IP and port, connect and voila!
In Ubuntu is so much easier!
Go to: support.microsoft.com/kb/147706
Use the highest level that works. For user and password it depends on if the computer is a domain member. You can use a local account if you are able to add permissions to the ACL. Don't forget to do it on the share as well as the share root (& subsequent lower level directories as needed, etc.)
If an XP or older which uses "share level" instead of "user level", use the username "guest" and for password use whatever password you put on the workgroup share when you set it up.
To clarify, are you trying to access files on your android device from your windows PC via network share/samba, or access a share on your PC via the phone?
Hello All!
I was disappointed when I received my Huawei Mate SE BND-L34 (USA) 2 days ago that I could not unlock the bootloader because Huawei removed the unlock page from their website. Even after talking to support via live chat and email I could not get any help from them. So I decided to do my own research.
DISCLAIMER: THIS WILL WIPE YOUR DEVICE! THIS INCLUDES INTERNAL STORAGE! I am not responsible for any lost data or bricked devices!
Getting your Unlock Code:
1. First you need to go to https://www.dc-unlocker.com/ and register for an account. Do not download their software!
2. Instead download the software at https://hcu-client.com/
3. Install drivers via HiSuite if you have not.
4. View the supported devices page. Now the Mate SE is not listed as a supported device but it did work for my device (Mate SE).
5. Make sure your drivers are installed via HiSuite.
6. Now go into https://www.dc-unlocker.com/buy and buy 4 credits. This is needed for the software. Cost is 4 EUR ($5)
7. Launch HCU-Client and connect your phone.
8. Open the dialer on your phone and enter *#*#2846579#*#* select “Background settings”, “USB ports settings”, “Manufacture mode”.
9. Now in HCU Client log into your account (Check your Email for info) click Read Phone Info.
10. Go to Unlock tab and choose Read Bootloader code. It says it will wipe your device but mine did not get wiped until I unlocked my phone. This will take a couple of minutes. Watch the right terminal window. It should spit out your code.
Using your Unlock Code:
1. Turn off your phone, Boot your device into Fastboot mode with Vol down and power button.
2. CD to where you downloaded ADB/Fastboot Tools
Run these commands when inside ADB tools directory
a) fastboot devices. (your device should bee listed. If not reinstall drivers/reboot)
b) fastboot oem get-bootinfo (just to confirm everything is detected correctly
c) fastboot oem unlock <your_unlock_code>
3. Acknowledge the prompt on your phone. Device will be WIPED!
4. Once the wipe finishes it will take several minutes for phone to boot up. Do not panic. Once you See Huawei logo you are OK!
To root your Mate SE and Install TWRP follow this guide: http://www.desinerd.co.in/how-to-huawei-mate-se-root-twrp-recovery/
Do not use the Magisk Zip in that post. Instead grab it from here: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Reserved
dude thanks so much it worked!!! on the honor 7x!!
EDIT: To my surprise it actually worked
Anyone else having antivirus flagging the HCU exe as having a virus?
foltz61 said:
Anyone else having antivirus flagging the HCU exe as having a virus?
Click to expand...
Click to collapse
The tool is safe. It's a false positive. If you are unsure Go read the HCU-Client forums.
Its your decision but I haven't noticed any ill effects. You can always run it in a VM.
Ok. Thanks
Sent from my BND-L34 using Tapatalk
Stupid program won't run on my computer. Saw someone else on the dc-unlocker forums with the same problem. They linked a version to download but the link is dead now. I think this phone really wants to be returned.
Sent from my BND-L34 using Tapatalk
foltz61 said:
Stupid program won't run on my computer. Saw someone else on the dc-unlocker forums with the same problem. They linked a version to download but the link is dead now. I think this phone really wants to be returned.
Click to expand...
Click to collapse
You can try DC-locker instead of HCU-Client. I just find HCU easier to use.
Are u on Windows 10? If not make sure you have latest. NET Framework installed. Try running in compatibility mode.
Sandman-007 said:
You can try DC-locker instead of HCU-Client. I just find HCU easier to use.
Are u on Windows 10? If not make sure you have latest. NET Framework installed. Try running in compatibility mode.
Click to expand...
Click to collapse
Yes, Win 10. DC-unlocker link in the Android app shows 7x BND-L34 as compatible but it's not in the drop-down box of the Windows app and doesn't get autodetected .
Sent from my Ascend Mate 2 using Tapatalk
foltz61 said:
Yes, Win 10. DC-unlocker link in the Android app shows 7x BND-L34 as compatible but it's not in the drop-down box of the Windows app and doesn't get autodetected .
Click to expand...
Click to collapse
Yea only thing I can think of is make sure latest .Net framework is installed and latest Visual C. Maybe try compatibility mode
The DC-unlocker problems were my fault. After getting the drivers right, it detected my phone and pulled the unlock code.
Sent from my Ascend Mate 2 using Tapatalk
Logged into this account for the first time in YEARS just to say thanks a lot for this. I was pretty gutted when I found that Huawei removed their Unlock link and refused to give codes to anyone even via support emails.
I was super hesitant to try this though, I'll admit. Spending money on what (to me) looked like a shady site was the biggest red flag. But decided to bite the bullet and do it.
The only issue I had was that my phone DID get shut down after the bootloader code was read, which caused ADB not to be able to read my phone (adb devices) for some reason. So I had to turn it on, reboot fastboot via adb and then proceed from there. But that was the only issue I had.
So again, thanks a ton for this. :good:
Got problems making this work. Hope you don't mind helping an Android newbie.
Step 7 is to "start client". On Windows 10 I had to disable the virus scan just to see the HCU.exe from the extract. When I click on it I get "This application was unable to start correctly 0xc150002". Ideas? A previous step is to install drivers. I downloaded HiSuite and and made sure I could connect to my device. Does "installing drivers" mean something more ? Thanks.
Vevima said:
Got problems making this work. Hope you don't mind helping an Android newbie.
Step 7 is to "start client". On Windows 10 I had to disable the virus scan just to see the HCU.exe from the extract. When I click on it I get "This application was unable to start correctly 0xc150002". Ideas? A previous step is to install drivers. I downloaded HiSuite and and made sure I could connect to my device. Does "installing drivers" mean something more ? Thanks.
Click to expand...
Click to collapse
Nope you are good on the drivers. Nothing else to be done.
As for the error code I recommend disable your Anti-virus and the built in Windows Defender and then re-downloading the program. If it still doesn't work you can try the DC-unlocker program instead of HCU-Client. It should work I just have only used HCU-CLIENT.
Vevima said:
Got problems making this work. Hope you don't mind helping an Android newbie.
Step 7 is to "start client". On Windows 10 I had to disable the virus scan just to see the HCU.exe from the extract. When I click on it I get "This application was unable to start correctly 0xc150002". Ideas? A previous step is to install drivers. I downloaded HiSuite and and made sure I could connect to my device. Does "installing drivers" mean something more ? Thanks.
Click to expand...
Click to collapse
I had the same problem. I used dc-unlocker instead.
Sent from my BND-L34 using Tapatalk
Finally got my unlock code! Many thanks to Sandman-007 and foltz61 for their help.
Following instructions from #1 of this thread, I could not (like others here) get the hcu client working on my PC. So here are my instructions on using DC-unlocker instead:
1. Go to consumer.huawei.com / minisite / HiSuite_en/
Download HiSuite. Install it on PC. Connect Phone to PC. In HiSuite click connect to my device.
(May have to enter Developper Mode on Phone: Settings>About Phone>Tap 7 times on your Build number. Enable USB debugging.)
2. Go to www .dc-unlocker .com / buy
Item : New user account, User name you want, Your email, Credits: 4
They will send you a email with a username and password you will need later ...
3. Go to www .dc-unlocker .com / downloads
Download DC-unlocker client to PC. Install it.
4. With Phone still connect to PC, use phone dialer enter *#*#2846579#*#*
Select “Background settings”, “USB ports settings”, “Manufacture mode”.
5. Now start the dc-unlocker client on the PC.
Enter: Huawei Phones (not modems) + Auto Detect + Click Search Icon. You will then see some on your phone info.
6. Click on "Server" and enter your username and password from the email you got at step 2.
7. Click on "Unlocking" + Read Boodloading code. Voila! Copy paste your code somewhere safe!
After giving me my code, my phone shut down. I just re-started it and all was fine.
(To get a better idea, the youtube video v=Lgph755EbKEcovers steps 4 to 7.)
I just did some searching, in my backup images. And I found the unlock code inside the "splash2.img"
/dev/block/mmcblk0p19
Still looking into possible ways to read this from inside the phone, and from locked phone too.
NVM, I think splash2.img is just some type of log file
Is there any other way to get the bootloader unlock code? I tried to buy credits and they refunded me because my paypal is not verified.
Or does anybody out there have a license and would be willing to run my IMEI to get my code? I am at a loss of what else to do.
SimpleRick said:
Is there any other way to get the bootloader unlock code? I tried to buy credits and they refunded me because my paypal is not verified.
Or does anybody out there have a license and would be willing to run my IMEI to get my code? I am at a loss of what else to do.
Click to expand...
Click to collapse
Why don't you just verify your PayPal or use a credit card?
Someone can't just run your IMEI to get an unlock code. Only way is if they reprogram their device to use your IMEI. That's illegal.
You should NEVER under any circumstances just hand it out. Especially with this tool. Someone with this tool could steal your IMEI and knock you offline.