I have SM-G530H/DS hard bricked, no power, can't entry recovery mode or download mode. But, if I connect the device to PC it recognize as "QHSUSB_BULK" I've found method that can bring back the device alive, I want to use This Method to recover it, but I need unbrick.img for Grand Prime, could anyone give me favor?
Thanks in advance..
Update :
Thanks to D.R-Ult.Googler for provide his debrick.img here's the link : http://forum.xda-developers.com/showpost.php?p=69029226&postcount=10
Did you try this :
http://www.beingtricky.com/unbrick-any-android-phone/
ciel phantomhive said:
Did you try this :
http://www.beingtricky.com/unbrick-any-android-phone/
Click to expand...
Click to collapse
Not working, when I click unsoft brick it show message "failed"
Operating System: Windows
Found Heimdall Version: Heimdall v1.0.2bUnbrick Commanded!
Failed.
Click to expand...
Click to collapse
eightman-8 said:
Not working, when I click unsoft brick it show message "failed" Operating System: Windows
Found Heimdall Version: Heimdall v1.0.2bUnbrick Commanded!
Failed.
Click to expand...
Click to collapse
Dis you set up java and follow all steps ?
ciel phantomhive said:
Dis you set up java and follow all steps ?
Click to expand...
Click to collapse
I have Java installed also heimdall, the software launched and phone plugged in, after I click unsoft brick it just show "failed"
Find someone with a simillar phone like your and tell him to flash this
It will create the debrick.img
ciel phantomhive said:
Find someone with a simillar phone like your and tell him to flash this
It will create the debrick.img
Click to expand...
Click to collapse
Thanks for the file, gonna have to wait for reply someone who have similar device..
ciel phantomhive said:
Find someone with a simillar phone like your and tell him to flash this
It will create the debrick.img
Click to expand...
Click to collapse
Is that file can be used for SM-G530H, it seems like just for T999 ?
eightman-8 said:
Is that file can be used for SM-G530H, it seems like just for T999 ?
Click to expand...
Click to collapse
Yess it contain just a command to be executed which is the same for samsung phones
See :
http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
I'll give the debrick.img , please wait
Edit : Here you go ( remember this is for XCU )
https://filescdn.com/nelve67e10u0
I installed TWRP on my GRAND PRIME sm-g530bt and it does not start any more.
Mobile link:
https://www.youtube.com/watch?v=vM_9warqENU
Help
How can I compile this to make it work with xxu ?
help
I need one for xxu baseband pls. a debrick.img
Thanx
Thanks very much for this.. been looking for a while
Need Help
I've messed up my Grand Prime G530H (XXU) by Flashing Stock Lollipop Firmware through Odin but Without aboot.mbn file ( by extracting the firmware and then deleting this file and adding to archive by 7zip) , but after that my mobile is completely dead, no download mode, no recovery, no OS, and also computer doesn't recognize it. I've windows 10, 64 bit installed in my Laptop. Please I Need Help. I've read about USB Jig and also about debrick.img method. Do I Need Specific USB Jig for this Particular Model or Any USB Jig will Be Compatible? And Also I Need debrick img for My This G530H (XXU) Model. Kindly Help. Thanks in Anticipation.
I read somewhere that " if somehow Preloader get Corrupted then you phone will not able to DETECT WITH PC !!! in other words you will have phone with BOOT DEAD.
Read more https://www.droidgyan.com/soft-brick-vs-hard-bricked-vs-broken/
Related
!NOTES!
> Unable to port cwm because LG uses separate coding
> Development will continue in September when i receive my new pc
Flashable Firmware
V11E: TBA
Tools That can be used for our phone.
MTK Droid Root & tools v2.4.8 Can be used to install english su
Swap Internal and External Storage
Warning!!! This file is still under dev, still works but your internal storage will stop working. I am currently using this file and you can see it in the second thumbnail. please download the archive labelled sdcard__emmc.
New Info
> Check this for info about flashing: http://forum.xda-developers.com/showpost.php?p=44240749&postcount=20
HOW TO FLASH
CREDIT:mircea89fzr
LINK:http://forum.xda-developers.com/showthread.php?p=44707571
DSP MANAGER
TO install extract the system folder to the system folder make sure you overwrite all files and set dspmanager apk to rw-r-r and reboot then it will work (source:http://forum.xda-developers.com/showthread.php?t=1790504)
camvar97 said:
can someone please port a rom to our phone... ill be glad to help by providing any files required to port.
Click to expand...
Click to collapse
How would you flash it? We don't even know how to flash standard kdz on lg l5 II. Start be finding that out. Here you will find the kdz for your phone: http://luivit.altervista.org/lg-phone-firmware/index.php?id_mod=23
mircea89fzr said:
How would you flash it? We don't even know how to flash standard kdz on lg l5 II. Start be finding that out. Here you will find the kdz for your phone: http://luivit.altervista.org/lg-phone-firmware/index.php?id_mod=23
Click to expand...
Click to collapse
what do I do after I figure out how to flash it.
camvar97 said:
what do I do after I figure out how to flash it.
Click to expand...
Click to collapse
have you done that?
mircea89fzr said:
have you done that?
Click to expand...
Click to collapse
not yet but i was just wondering
camvar97 said:
not yet but i was just wondering
Click to expand...
Click to collapse
maybe get fastboot to work, then extract kdz into system.img and boot.img and so on
camvar97 said:
not yet but i was just wondering
Click to expand...
Click to collapse
i believe all i have to do is enter download mode and flash using kdz in 3GQCT mode.
Doesn't works, we have just tried it.
Inviato dal mio LG-E460 con Tapatalk 2
marce78 said:
Doesn't works, we have just tried it.
Inviato dal mio LG-E460 con Tapatalk 2
Click to expand...
Click to collapse
ok, well I forgot to notice that we have a MTK6575 phone which means we might be able to flash http://droidxda.blogspot.ca/2012/07/review-mtk65736575-complete-guide-to.html we can use the SP flashing tool on our phone. also i will not flash that until it is confirmed to work becuase i just bought the phone and dont need a third paperweight if i brick it.
http://forum.xda-developers.com/showthread.php?t=1825722 that is another link title: [PORT] [TOOL] CWMR/ TWRP Recovery for MT657x
UPDATE!!!
Flashing method found... Please refer to first post
camvar97 said:
UPDATE!!!
Flashing method found... Please refer to first post
Click to expand...
Click to collapse
Ohhhh thx .... but can we use firmware.kdz or need other firmware?
marce78 said:
Ohhhh thx .... but can we use firmware.kdz or need other firmware?
Click to expand...
Click to collapse
we will need to find a way to decompile the kdz file... i haven't found a way to decompile the SCI_file_final.bin file within the kdz
camvar97 said:
we will need to find a way to decompile the kdz file... i haven't found a way to decompile the SCI_file_final.bin file within the kdz
Click to expand...
Click to collapse
Can you link mediatek driver to be installaed, this is my firs mt based smartphone and it's all new to me.
marce78 said:
Can you link mediatek driver to be installaed, this is my firs mt based smartphone and it's all new to me.
Click to expand...
Click to collapse
I didnt have to install any to get the tools working
can you tell me what is the different of v11 to v10? Sorry for my bad english
deif102 said:
can you tell me what is the different of v11 to v10? Sorry for my bad english
Click to expand...
Click to collapse
He's from canada. Only they have 11(C/E) firmware. My guess, there's no difference.
I found this for creating scatter file and cwm recovery: http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
mircea89fzr said:
He's from canada. Only they have 11(C/E) firmware. My guess, there's no difference.
I found this for creating scatter file and cwm recovery: http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
Click to expand...
Click to collapse
Ok will try
camvar97 said:
i believe all i have to do is enter download mode and flash using kdz in 3GQCT mode.
Click to expand...
Click to collapse
To enter download mode, follow the procedure.
1. remove battery.
2. Press Volume up and down at the same time,
then plug usb cable.
Another method is to press volume down+quick memo+power key,
then keep holding volume down and quick memo key.
You may try one of them
somebody found out how to flash kdz on our phone: http://forum.xda-developers.com/showpost.php?p=44238701&postcount=35
if this helps you develop, this is how to create a kdz: http://forum.xda-developers.com/showthread.php?t=2179431
First sorry if this has been asked the forum is rather large and sifting thru all the posts is a bit tedious. Is there a root out for the t537v module of the galaxy tab 4?
Thanks in advance
uroboch said:
First sorry if this has been asked the forum is rather large and sifting thru all the posts is a bit tedious.
Click to expand...
Click to collapse
Did you try towelroot?
Also don't keep saying what I quoted you on. Someone less nice than me is going to jump down your throat for it lol
thisisapoorusernamechoice said:
Did you try towelroot?
Also don't keep saying what I quoted you on. Someone less nice than me is going to jump down your throat for it lol
Click to expand...
Click to collapse
Thanks for the advice and yes i tried towel root it tells me "This Phone isn't Supported"
uroboch said:
First sorry if this has been asked the forum is rather large and sifting thru all the posts is a bit tedious. Is there a root out for the t537v module of the galaxy tab 4?
Thanks in advance
Click to expand...
Click to collapse
Hi ,
I think you have latest build now (4.4.4) , yes ? If yes , you must to try to flash via Odin older firmware http://www.sammobile.com/firmwares/download/34971/T537VVRU1ANE2_T537VVZW1ANE2_VZW/ from any source . Before flashing you must to do factory reset . Then to try Towelroot . Perhaps you must to try like here http://forum.xda-developers.com/showpost.php?p=58501194&postcount=245 . Then freeze or delete update service . If all will be fail , flash your last firmware again (for return back) .
Remember , you lost data when do factory reset .
You not afraid nothing .
repey6 said:
Hi ,
I think you have latest build now (4.4.4) , yes ? If yes , you must to try to flash via Odin older firmware http://www.sammobile.com/firmwares/download/34971/T537VVRU1ANE2_T537VVZW1ANE2_VZW/ from any source . Before flashing you must to do factory reset . Then to try Towelroot . Perhaps you must to try like here http://forum.xda-developers.com/showpost.php?p=58501194&postcount=245 . Then freeze or delete update service . If all will be fail , flash your last firmware again (for return back) .
Remember , you lost data when do factory reset .
You not afraid nothing .
Click to expand...
Click to collapse
Trying this now i will let you all know how it goes.
uroboch said:
Trying this now i will let you all know how it goes.
Click to expand...
Click to collapse
Sadly i couldn't get the old firmware to flash onto the device. if anyone has done this and had luck please let me know where you got the firmware and what you did to get it to work.
Thanks in advance.
uroboch said:
Sadly i couldn't get the old firmware to flash onto the device. if anyone has done this and had luck please let me know where you got the firmware and what you did to get it to work.
Thanks in advance.
Click to expand...
Click to collapse
Please wait little . I can to give you this firmware in the night .
Ready
UPD.Strangely, some problems with the archive. try to understand
Try this . May be you can to flash this tar-archive . If no , i will search new right archive .
See last post
I will try to fix it in afternoon
downloading the tar archive now i will let you know if i have success.
Thanks
uroboch said:
downloading the tar archive now i will let you know if i have success.
Thanks
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=95916177934538217
All is OK !
Archive is good . My tab shows that archive is bad . And my PC shows that archive is normal .
repey6 said:
https://www.androidfilehost.com/?fid=95916177934538217
All is OK !
Archive is good . My tab shows that archive is bad . And my PC shows that archive is normal .
Click to expand...
Click to collapse
the message I'm getting is SW REV CHECK FAIL : [aboot]Fused 2 > binary 1
uroboch said:
the message I'm getting is SW REV CHECK FAIL : [aboot]Fused 2 > binary 1
Click to expand...
Click to collapse
you flash archive from https://www.androidfilehost.com/?fid=95916177934538217 ?
That's the archive I'm using. I don't think I'm using Odin right.
uroboch said:
That's the archive I'm using. I don't think I'm using Odin right.
Click to expand...
Click to collapse
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin ZIP file
Open Odin v.3.09
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
uroboch said:
That's the archive I'm using. I don't think I'm using Odin right.
Click to expand...
Click to collapse
these are the directions I'm using to flash the device
http://primehowto.com/update-galaxy-tab-4-10-1-lte-verizon-sm-t537v-android-4-4-4-kitkat-t537vvru2ank1-official-firmware/
"How To Install T537VVRU2ANK1 Android 4.4.4 KitKat On Galaxy Tab 4 10.1 LTE (Verizon) SM-T537V Manually"
using the tar you gave me
Still getting above mentioned error on my device after i start the flash and it fails. Alas it appears i shall have to wait until someone figures out how to root the newest firmware.
uroboch said:
these are the directions I'm using to flash the device
http://primehowto.com/update-galaxy-tab-4-10-1-lte-verizon-sm-t537v-android-4-4-4-kitkat-t537vvru2ank1-official-firmware/
"How To Install T537VVRU2ANK1 Android 4.4.4 KitKat On Galaxy Tab 4 10.1 LTE (Verizon) SM-T537V Manually"
using the tar you gave me
Still getting above mentioned error on my device after i start the flash and it fails. Alas it appears i shall have to wait until someone figures out how to root the newest firmware.
Click to expand...
Click to collapse
So , good guide . Follow him . Unfortunately install this firmware does not work.
You dont try flash only older kernel like PDA via Odin ?
I also tried to flash using odin 3.07 and the PDA option but it fails.
Thanks again for all the help
uroboch said:
I also tried to flash using odin 3.07 and the PDA option but it fails.
Thanks again for all the help
Click to expand...
Click to collapse
Wait little i ask guru
repey6 said:
You dont try flash only older kernel like PDA via Odin ?
Click to expand...
Click to collapse
And why exactly shouldn't they try that? That's exactly what they're doing here I even contacted the moderator to verify that. Plus I used that method to re-root after I had to Odin back to complete factory stock. I don't see what the problem is flashing just an older kernel, rooting using towelroot, and then flashing the most current kernel. That's exactly how my tablet is rooted and was on the most current firmware (OA2) before I flashed Cyanogenmod
My phone is bricked and I can't get it back. I'm using the N910W8 but I think the file partition for any N910 will work.
I'm desperate to get my note back up and running.
MCWood said:
My phone is bricked and I can't get it back. I'm using the N910W8 but I think the file partition for any N910 will work.
I'm desperate to get my note back up and running.
Click to expand...
Click to collapse
i guess i have it for 910G, you can try this , please report if it works
Idiot learn to post in xda.
Zionator said:
Idiot learn to post in xda.
Click to expand...
Click to collapse
What this charming person means to say is that you shouldn't post questions in development forums, as its against XDA rules.
Questions like this belong in the Q&A section of the Note 4 forum.
?
Er. Aditya said:
i guess i have it for 910G, you can try this , please report if it works
Click to expand...
Click to collapse
Are you sure it is file PIT for Note 4 SM-N910G Telstra Australia ? As I knew, SM-N910G is for 3 countries : Singapore, Indian and Telstra Australia. I have tried to flash rom through some version of Odin, it failed and asked for PIT file ? Can you guide how to use PIT file, thanks.
Er. Aditya said:
i guess i have it for 910G, you can try this , please report if it works
Click to expand...
Click to collapse
I'm a fan of your work, I hope you could help. are you familiar with SD card boot recovery? i seemed to have hardbricked my N910G (Dead boot) and so far the fix is not available yet on this forum: http://forum.gsmhosting.com/vbb/f20...-n9108v-sm-n9100-sm-g901f-1876234/index3.html
i do have a nandroid backup but since my phone won't even boot to download mode(not even switch on) and i don't have a JTAG box to revive it, the next solution is to boot via SD card recovery but i need to do the procedure from the attached pdf file using a working N910G which i don't have, anyone here have a SDcard for boot recovery for N910G it would be much appreciated.
Jaistah said:
I'm a fan of your work, I hope you could help. are you familiar with SD card boot recovery? i seemed to have hardbricked my N910G (Dead boot) and so far the fix is not available yet on this forum: http://forum.gsmhosting.com/vbb/f20...-n9108v-sm-n9100-sm-g901f-1876234/index3.html
i do have a nandroid backup but since my phone won't even boot to download mode(not even switch on) and i don't have a JTAG box to revive it, the next solution is to boot via SD card recovery but i need to do the procedure from the attached pdf file using a working N910G which i don't have, anyone here have a SDcard for boot recovery for N910G it would be much appreciated.
Click to expand...
Click to collapse
il see what i can do , has anyone ever sucesfully revived with this method ?
and i am sure android version should not be of any problems here ?
Er. Aditya said:
il see what i can do , has anyone ever sucesfully revived with this method ?
and i am sure android version should not be of any problems here ?
Click to expand...
Click to collapse
base from the other forum some successfully revive it using N910F but since the pit file they have doesn't include N910G, i was wondering if your PIT file and Battlehero's BL (https://www.androidfilehost.com/?w=files&flid=41389) would work if created via odin using the T-Flash feature. with that it would be possible to do Download mode from the SD card.
Jaistah said:
base from the other forum some successfully revive it using N910F but since the pit file they have doesn't include N910G, i was wondering if your PIT file and Battlehero's BL (https://www.androidfilehost.com/?w=files&flid=41389) would work if created via odin using the T-Flash feature. with that it would be possible to do Download mode from the SD card.
Click to expand...
Click to collapse
it failed for me .... sd should be formated in fat or ntfs ?
Er. Aditya said:
it failed for me .... sd should be formated in fat or ntfs ?
Click to expand...
Click to collapse
Sorry, not sure about the SD card format. thanks for trying though.
Jaistah said:
Sorry, not sure about the SD card format. thanks for trying though.
Click to expand...
Click to collapse
let me try one more thing
hi, for n910g pit files search it in sammobile or google using "TRLTE_SEA_XSA.pit" and the mobile is dead as like black screen, but in pc, showing hsb-qualcom... how to dead booot repair? i have atf box.
Hi, this is the first threat i make (if something is wrong please moderators correct me )
Im doing this on tab 4 8.0 T331 3g version
Okay i'll begin explaining how did i get to the tablet totally useless by only being recognized with the sound when connects but nothing more.
I was trying ot restore my EFS.img via terminal emulator, i found a short tutorial where it said that only doing this: dd if=/storage/sdcard/efs.img of=/dev/block/mmcblk0p3 bs=4096
well once i did that it said: write error: no space left on device
well i said, doesnt matter, maybe a reboot will fix it... nope. it didnt. it just went black screen and never turn back on, so i was in the QHSUSB_BULK and it never installed the drivers, so i downloaded qualcomm drivers and installed, but now it doesnt even recognize my device, tried uninstalling driver and it didnt helped.
so i was looking for solutions and found that famous ATF tool, and found the "debrick" SDC for my tablet but i cant install it to my sdcard because i dont have the box that does that. so i decided to find any "sdc to img" converter so i can place it to my sd card and try to boot my tab, i couldnt find anything that could do that.
so, what i need? a debrick.img that anyone can take out from its tab 4 t331, i've read that it can be done with this: https://www.androidfilehost.com/?fid=23329332407577222
i quote: "its a debrick img creator hosted by Surge (thanks) hopefully this one will work"
it can be flashed via recovery and it takes out a debrick.img, if someone can upload that for me, i would make a bootable sd card with it so i can place it on my tab and then i can re flash it with odin.
If i can get it to work i will make the tutorial so everyone can be advised to avoid this problem
Thanks in advanced
anyone? i cant believe that no one has this device, i need only a debrick image, please
Joanse said:
anyone? i cant believe that no one has this device, i need only a debrick image, please
Click to expand...
Click to collapse
What is this ddbrick image ? Does not exist this image . Simply flash your stock firmware via Odin .
repey6 said:
What is this ddbrick image ? Does not exist this image . Simply flash your stock firmware via Odin .
Click to expand...
Click to collapse
i cant load download mode, please read my threat, i already explained why i cant, thats why i need the debrick image, i will make this procedure to fix it https://www.youtube.com/watch?v=29r-F7xZoEA
Joanse said:
i cant load download mode, please read my threat, i already explained why i cant, thats why i need the debrick image, i will make this procedure to fix it https://www.youtube.com/watch?v=29r-F7xZoEA
Click to expand...
Click to collapse
Download mode : power - volume down - home . hold on all buttoms .
Will not download mode try to restore with Kies .
repey6 said:
Download mode : power - volume down - home . hold on all buttoms .
Will not download mode try to restore with Kies .
Click to expand...
Click to collapse
how can i restore it with keys if keys asks me to go download mode?
Joanse said:
how can i restore it with keys if keys asks me to go download mode?
Click to expand...
Click to collapse
If you cant go to download mode , if you cant restore with Kies go to service center
repey6 said:
If you cant go to download mode , if you cant restore with Kies go to service center
Click to expand...
Click to collapse
i cant go to any service center because there are not here in my city.... this is why in trying to take out a debrick image, or a boot from other t331 so i can flash it in my sd card and with it boot my tab... thats a simple procedure that can be done with any samsung qualcomm based device, two threads back i gave a link to a video where a senior member of xda shows this on a galaxy s5, so thats the only thing i need
Joanse said:
i cant go to any service center because there are not here in my city.... this is why in trying to take out a debrick image, or a boot from other t331 so i can flash it in my sd card and with it boot my tab... thats a simple procedure that can be done with any samsung qualcomm based device, two threads back i gave a link to a video where a senior member of xda shows this on a galaxy s5, so thats the only thing i need
Click to expand...
Click to collapse
Simple procedure is a flashing stock firmware via Odin or restore firmware via Kies .But via Odin better .
anyone with other solution than using odin or kies? I CANT go to download mode
please... i need this tab, anyone can help me?
Joanse said:
please... i need this tab, anyone can help me?
Click to expand...
Click to collapse
you someone with same device and a fast connection who can dump his storage to an image:
busybox dd if=/dev/block/mmcblk0 of=/sdcard/backup.bin bs=1M count=200
http://forum.xda-developers.com/showthread.php?t=2660566 <- explained here.
sub77 said:
you someone with same device and a fast connection who can dump his storage to an image:
busybox dd if=/dev/block/mmcblk0 of=/sdcard/backup.bin bs=1M count=200
http://forum.xda-developers.com/showthread.php?t=2660566 <- explained here.
Click to expand...
Click to collapse
Thank you, That exactly what i need and exactly what im looking for here with this thread, someone who can take out that .img for me so i can do that exact same procedure, but it seems that no one is willing to help me with it
anyone with a tab t331 who can help me?
its impossible that im the only owner of a G tab 4 t331,,,, seriously theres NO ONE? i need just one person with it who can help me
Joanse said:
its impossible that im the only owner of a G tab 4 t331,,,, seriously theres NO ONE? i need just one person with it who can help me
Click to expand...
Click to collapse
is there no possibility to get mmblk0 out of stock image?
sub77 said:
is there no possibility to get mmblk0 out of stock image?
Click to expand...
Click to collapse
I've tried it, but ir doesnt work
I made this debrick image from epg2 6.0.1 firmware.
Download link https://mega.nz/#!Occ0hbxT!WaScVzQ2CPb9GxUD2Kqy2GKwm8jv1Z7YSbxwE_SpEzA
How does the actual "debricking" process work? Is it a case where you are fooling the phone into believing that it is updating to a newer bootloader or modem?
with no info on this i wouldnt flash anything.
monkeyass408 said:
with no info on this i wouldnt flash anything.
Click to expand...
Click to collapse
It worked on my phone since I have the EPG2 firmware. I just did it today.
Kevindroid said:
It worked on my phone since I have the EPG2 firmware. I just did it today.
Click to expand...
Click to collapse
Can you have a guide for other noobs like me ? when will i need this img and how does it save my phone ?
tuilalnvinh said:
Can you have a guide for other noobs like me ? when will i need this img and how does it save my phone ?
Click to expand...
Click to collapse
Here! Just following Trex888 instruction, it's post #4!
http://forum.xda-developers.com/note-4-tmobile/help/hardbricked-note-4-help-t3448834
what steps should I follow? You could use any memory? pleace help me
When My Note 4 Hard bricked I Followed the instructions in this post, it also used a Debrick img from Trex888 (thanks for the img you saved me) so you might want to grab the new img from here and follow the steps in the post linked below.
http://forum.xda-developers.com/note-4-tmobile/help/galaxy-note-4-n910t-fixed-hard-bricked-t3466547
Gobling Ganf said:
what steps should I follow? You could use any memory? please help me
Click to expand...
Click to collapse
my pc detects note 4 brick as qhsusb_bulk can do the same procedure?
Gobling Ganf said:
my pc detects note 4 brick as qhsusb_bulk can do the same procedure?
Click to expand...
Click to collapse
Yes your device is bricked.
Follow instructions carefully and be patient.
Download qualcomm usb drivers
Download debrick.image
Download win32 disk imager software
And write debrick image to fully formated microsd card using win32 disk imager
Put micro sd card in phone and try boot normally
If doesn't boot try hold power button for few seconds
If doesn't work try whole procedure again.
Once came back to life flash stock firmware in odin VERY IMPORTANT
You messed up device so be patient to bring back to life
Hi, upload the link again, you can
this link always falls but the other does not.
thanks bro.
or someone who has it please share it with me.