[Q] root for sm-t537v - Galaxy Tab 4 Q&A, Help & Troubleshooting

First sorry if this has been asked the forum is rather large and sifting thru all the posts is a bit tedious. Is there a root out for the t537v module of the galaxy tab 4?
Thanks in advance

uroboch said:
First sorry if this has been asked the forum is rather large and sifting thru all the posts is a bit tedious.
Click to expand...
Click to collapse
Did you try towelroot?
Also don't keep saying what I quoted you on. Someone less nice than me is going to jump down your throat for it lol

thisisapoorusernamechoice said:
Did you try towelroot?
Also don't keep saying what I quoted you on. Someone less nice than me is going to jump down your throat for it lol
Click to expand...
Click to collapse
Thanks for the advice and yes i tried towel root it tells me "This Phone isn't Supported"

uroboch said:
First sorry if this has been asked the forum is rather large and sifting thru all the posts is a bit tedious. Is there a root out for the t537v module of the galaxy tab 4?
Thanks in advance
Click to expand...
Click to collapse
Hi ,
I think you have latest build now (4.4.4) , yes ? If yes , you must to try to flash via Odin older firmware http://www.sammobile.com/firmwares/download/34971/T537VVRU1ANE2_T537VVZW1ANE2_VZW/ from any source . Before flashing you must to do factory reset . Then to try Towelroot . Perhaps you must to try like here http://forum.xda-developers.com/showpost.php?p=58501194&postcount=245 . Then freeze or delete update service . If all will be fail , flash your last firmware again (for return back) .
Remember , you lost data when do factory reset .
You not afraid nothing .

repey6 said:
Hi ,
I think you have latest build now (4.4.4) , yes ? If yes , you must to try to flash via Odin older firmware http://www.sammobile.com/firmwares/download/34971/T537VVRU1ANE2_T537VVZW1ANE2_VZW/ from any source . Before flashing you must to do factory reset . Then to try Towelroot . Perhaps you must to try like here http://forum.xda-developers.com/showpost.php?p=58501194&postcount=245 . Then freeze or delete update service . If all will be fail , flash your last firmware again (for return back) .
Remember , you lost data when do factory reset .
You not afraid nothing .
Click to expand...
Click to collapse
Trying this now i will let you all know how it goes.

uroboch said:
Trying this now i will let you all know how it goes.
Click to expand...
Click to collapse
Sadly i couldn't get the old firmware to flash onto the device. if anyone has done this and had luck please let me know where you got the firmware and what you did to get it to work.
Thanks in advance.

uroboch said:
Sadly i couldn't get the old firmware to flash onto the device. if anyone has done this and had luck please let me know where you got the firmware and what you did to get it to work.
Thanks in advance.
Click to expand...
Click to collapse
Please wait little . I can to give you this firmware in the night .

Ready
UPD.Strangely, some problems with the archive. try to understand
Try this . May be you can to flash this tar-archive . If no , i will search new right archive .
See last post

I will try to fix it in afternoon

downloading the tar archive now i will let you know if i have success.
Thanks

uroboch said:
downloading the tar archive now i will let you know if i have success.
Thanks
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=95916177934538217
All is OK !
Archive is good . My tab shows that archive is bad . And my PC shows that archive is normal .

repey6 said:
https://www.androidfilehost.com/?fid=95916177934538217
All is OK !
Archive is good . My tab shows that archive is bad . And my PC shows that archive is normal .
Click to expand...
Click to collapse
the message I'm getting is SW REV CHECK FAIL : [aboot]Fused 2 > binary 1

uroboch said:
the message I'm getting is SW REV CHECK FAIL : [aboot]Fused 2 > binary 1
Click to expand...
Click to collapse
you flash archive from https://www.androidfilehost.com/?fid=95916177934538217 ?

That's the archive I'm using. I don't think I'm using Odin right.

uroboch said:
That's the archive I'm using. I don't think I'm using Odin right.
Click to expand...
Click to collapse
Instructions
 Extract (unzip) the firmware file
 Download Odin v3.09
 Extract Odin ZIP file
 Open Odin v.3.09
 Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
 Connect phone and wait until you get a blue sign in Odin
 Add the firmware file to AP / PDA
 Make sure re-partition is NOT ticked
 Click the start button, sit back and wait few minutes

uroboch said:
That's the archive I'm using. I don't think I'm using Odin right.
Click to expand...
Click to collapse
these are the directions I'm using to flash the device
http://primehowto.com/update-galaxy-tab-4-10-1-lte-verizon-sm-t537v-android-4-4-4-kitkat-t537vvru2ank1-official-firmware/
"How To Install T537VVRU2ANK1 Android 4.4.4 KitKat On Galaxy Tab 4 10.1 LTE (Verizon) SM-T537V Manually"
using the tar you gave me
Still getting above mentioned error on my device after i start the flash and it fails. Alas it appears i shall have to wait until someone figures out how to root the newest firmware.

uroboch said:
these are the directions I'm using to flash the device
http://primehowto.com/update-galaxy-tab-4-10-1-lte-verizon-sm-t537v-android-4-4-4-kitkat-t537vvru2ank1-official-firmware/
"How To Install T537VVRU2ANK1 Android 4.4.4 KitKat On Galaxy Tab 4 10.1 LTE (Verizon) SM-T537V Manually"
using the tar you gave me
Still getting above mentioned error on my device after i start the flash and it fails. Alas it appears i shall have to wait until someone figures out how to root the newest firmware.
Click to expand...
Click to collapse
So , good guide . Follow him . Unfortunately install this firmware does not work.
You dont try flash only older kernel like PDA via Odin ?

I also tried to flash using odin 3.07 and the PDA option but it fails.
Thanks again for all the help

uroboch said:
I also tried to flash using odin 3.07 and the PDA option but it fails.
Thanks again for all the help
Click to expand...
Click to collapse
Wait little i ask guru

repey6 said:
You dont try flash only older kernel like PDA via Odin ?
Click to expand...
Click to collapse
And why exactly shouldn't they try that? That's exactly what they're doing here I even contacted the moderator to verify that. Plus I used that method to re-root after I had to Odin back to complete factory stock. I don't see what the problem is flashing just an older kernel, rooting using towelroot, and then flashing the most current kernel. That's exactly how my tablet is rooted and was on the most current firmware (OA2) before I flashed Cyanogenmod

Related

PLease help!!! odin flash fails!!!

Hi you all!
i have got a galaxy note,
i hade the Revo note hd v1 rom before, when there was a upgrade to 2.5 i downloaden with kitchenpro, and istalled the rom, after the reboot, the phone didnt start it only freeze att start.
but i could go to download mode.
now i´m trying to flash with odin 1.85 but it fails after factoryfs.img!!
triyd the latest original N7000_XXKL8,
and tryid N7000XBKK4_N7000OXXKK5_NEE
same problem, what can i do??
please help!!!
Why did you tick Re-Partition?
Before you flash everything (with pit, csc, modem and repartition), you should try to the most basic solution first: Flash stock ROM in PDA only.
download firmware at: http://fus.nanzen.se/
(from Hoffighter's posting) http://forum.xda-developers.com/show....php?t=1350960
Download Check Fus Downloader 2.1, using the Check Fus Downloader, download Firmware N7000XXKL8 (Ibelieve it's for Germany). It will automatically decode the .enc2 file to.zip file
Extract the .zip file generated from decoding file to a folder and you will get
.tar.md 5 file.
open Odin3 1.85, attach the .md5 file to the PDA field on Odin.
(Leave pit, phone, and CSC blank, uncheck re-partition)
Go to download mode and click start on Odin.
If the above steps still fail you, than you can try other things.
but I believe your problem has nothing to do with Modem, pit, or partitioning.
Livewings said:
Why did you tick Re-Partition?
Click to expand...
Click to collapse
hi thnx for the reply,
i have ticked the re-partion because, i downloaded the flash tutorial from sammobile and it says so in the tutorial.
i have tryied with ticked and unticked. its not the first time i flash with odin, so !?
hii.
i have tried one file flash ( N7000XBKK4_N7000OXXKK5_NEE )
its stock rom, and tried the latest stock( N7000_XXKL8 )
and i do flash with odin the way you whrited.
any other ways to try?
Dont use 'Re-Partition'
Just follow link in my signature,(http://forum.xda-developers.com/showthread.php?t=1424997)
and I can see Netchip CWM in ur image, Dont use it, otherwise U will get increased binnary count as well yellow triangle.
Remove all ur file and follow instrauction as i said.(dont messup)
I had the same problem odiin got stuck at factoryfs.img....
Had connected phone through usb hub. ..connected it directly and problem solved
Hope this helps you
Sent from my GT-N7000 using XDA App
dr.ketan said:
Dont use 'Re-Partition'
Just follow link in my signature,(http://forum.xda-developers.com/showthread.php?t=1424997)
and I can see Netchip CWM in ur image, Dont use it, otherwise U will get increased binnary count as well yellow triangle.
Remove all ur file and follow instrauction as i said.(dont messup)
Click to expand...
Click to collapse
ok thnx m8,
should i use any pit files??
i do connect directly to the computer, no hubs!
i´ll try tonight, hopefully with good luck!
thnx
Dont use pit files...
Sent from my GT-N7000 using XDA App
loofee said:
ok thnx m8,
should i use any pit files??
i do connect directly to the computer, no hubs!
i´ll try tonight, hopefully with good luck!
thnx
Click to expand...
Click to collapse
No Dont use pit file, Dont use re-partition
dr.ketan said:
Dont use 'Re-Partition'
Just follow link in my signature,(http://forum.xda-developers.com/showthread.php?t=1424997)
and I can see Netchip CWM in ur image, Dont use it, otherwise U will get increased binnary count as well yellow triangle.
Remove all ur file and follow instrauction as i said.(dont messup)
Click to expand...
Click to collapse
hi i have followd you signature on you link.
downloaded xxkl8, odin, triyed to flash as you say, but stil the same problem.
odin fails to flash after factoryfr.bin
one pictures show when its freeze on like 5% bar.
the second show what it says when i only start the note
It seems you have raised binnary counter already.
It is strange issue, anyway try to factory reset n repeat, Disable, firewall / antivirus if any on your PC.
Also make sure kies is not running in background.
Sent from my GT-N7000 using XDA App
Ok i have solve he problem!
i tried to flash only the csc and phone, and that worked, didnt get any fail, and i could go to recovery.
Yes i have to use the pit-file. downloaded another pit file that whas newer, and that solved all the problem.
So thnx to all that tried to help me, big thnx!!!

SM-N9005 Kitkat 4.4.3 failed

After updating my phone to the new firmware N9005XXUENA6_N9005OXXENA5_XEO.zip my phone failed to flash using Odin. I have tried so many version of Odin and still no luck, i have basically downloaded every rom that i can find from samsung-updates.com and still no luck. Let me know if you guys have a for fix for this because as of right now i can boot into Odin Mode but when i try to flash it via Odin 3.09 on any Rom it will fail. And yes i have tried every Samsung Kies version to try initialize this phone but it just does not work. i have attached the image of my S/N and Model this is one of the HK version and yes i tried the HK TGY rom and still no luck.
con2vp1 said:
After updating my phone to the new firmware N9005XXUENA6_N9005OXXENA5_XEO.zip my phone failed to flash using Odin. I have tried so many version of Odin and still no luck, i have basically downloaded every rom that i can find from samsung-updates.com and still no luck. Let me know if you guys have a for fix for this because as of right now i can boot into Odin Mode but when i try to flash it via Odin 3.09 on any Rom it will fail. And yes i have tried every Samsung Kies version to try initialize this phone but it just does not work. i have attached the image of my S/N and Model this is one of the HK version and yes i tried the HK TGY rom and still no luck.
Click to expand...
Click to collapse
Well if you can still get into download mode you are still safe.
Does it fail mid flash or can´t even recognize your phone?
Reboot your pc and try again.
It will fail on the ABOOT, and i have tried to reboot my pc and still no luck i have attached my model of the phone
con2vp1 said:
It will fail on the ABOOT, and i have tried to reboot my pc and still no luck i have attached my model of the phone
Click to expand...
Click to collapse
Try this guide. It seems to be the same phone as yours.
If you are trying to go back to 4.3 from 4.4.2 then it won't be possible. You will now have to stay in KitKat only and wait for more ROM for KitKat.
Sent from my SM-N900 using Tapatalk
Did you try flashing with update bootloader ticked? If you tried that already then I think you are going to have to wait for the hk version of kit Kat for your phone to work again.
Or try this..... http://forum.xda-developers.com/showthread.php?t=null
Sent from my SM-N9005 using Tapatalk
odin 3.09 tick Phone boot loader update.
hey_joe said:
Try this guide. It seems to be the same phone as yours.
Click to expand...
Click to collapse
which one should i download the .zip or the .rar and they two different file size
con2vp1 said:
which one should i download the .zip or the .rar and they two different file size
Click to expand...
Click to collapse
Both are same.
Rar is just better compressed. I went with it.
Just an idea make sure reactivation lock is not ticked in settings
Sent from my SM-N9005 using xda app-developers app
rcp27 said:
Just an idea make sure reactivation lock is not ticked in settings
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Its not ticked, i might just have to wait to an HK firmware to update this because any other i have tried is not working and it says PIT FAIL when i try this solution http://forum.xda-developers.com/showthread.php?t=2613374. even though i followed the instructions step by step.
Is there another way to flash my device other than Odin? and yes ADB does not work
con2vp1 said:
Its not ticked, i might just have to wait to an HK firmware to update this because any other i have tried is not working and it says PIT FAIL when i try this solution http://forum.xda-developers.com/showthread.php?t=2613374. even though i followed the instructions step by step.
Is there another way to flash my device other than Odin? and yes ADB does not work
Click to expand...
Click to collapse
Can you screenshot your odin configuration that you flashed and post it here?
FeralFire said:
Can you screenshot your odin configuration that you flashed and post it here?
Click to expand...
Click to collapse
This is the Odin config and after the CSC was only applied the phone says PIT FAIL
con2vp1 said:
This is the Odin config and after the CSC was only applied the phone says PIT FAIL
Click to expand...
Click to collapse
Hmm.
Weird.
Do you know how to use heimdall?
Use it to have a look at your pit file and compare it to the one in the CSC zip. See what all is different.
Or just post your pit here.
EDIT: Just noticed that you have a 16GB version. I don't know how to help you there, man. You need a completely different pit file. One that is designed for 16GB. But since that model was only launched in Hong Kong, I don't think you will find one from outside, unless somebody can make one specifically for you. I have been trying to learn to do that, but as of yet, I can't.
Without a proper pit file, your only options are either wait for the Hong Kong Kitkat version or try installing the Sweet ROM.
con2vp1 said:
After updating my phone to the new firmware N9005XXUENA6_N9005OXXENA5_XEO.zip my phone failed to flash using Odin. I have tried so many version of Odin and still no luck, i have basically downloaded every rom that i can find from samsung-updates.com and still no luck. Let me know if you guys have a for fix for this because as of right now i can boot into Odin Mode but when i try to flash it via Odin 3.09 on any Rom it will fail. And yes i have tried every Samsung Kies version to try initialize this phone but it just does not work. i have attached the image of my S/N and Model this is one of the HK version and yes i tried the HK TGY rom and still no luck.
Click to expand...
Click to collapse
're using Odin with Note 3 connected to a USB 3.0? if yes, try connecting it to a USB 2.0. already happened to me a few times, and the solution was this. sorry for the bad english.
FeralFire said:
Hmm.
Weird.
Do you know how to use heimdall?
Use it to have a look at your pit file and compare it to the one in the CSC zip. See what all is different.
Or just post your pit here.
Click to expand...
Click to collapse
Well thats an issue because im not sure if this my right PIT FILE for this phone. Because usually it will go smoothly for these manual updates using Odin and this is my first encountering this error. And my fault i didnt backup my ROM which i should have done first before getting excited with this KitKat for my Note 3. That CSC file i got that from this site http://forum.xda-developers.com/showthread.php?t=2613374 and just followed instructions on how to do it, but it will just give me that error when i try to apply that method. But here's the PIT file that i got from that download.
I think its on a wrong region because i got that leaked update here http://www.sammobile.com/2014/01/13...kitkat-rolling-out-to-galaxy-note-3-sm-n9005/ and it looks like from Poland? does that matter? because my Note 3 is and HK version?
I have done so many phones rooted them and install custom roms this is the first time it failed on me. And funny thing is its my own cell phone lol
con2vp1 said:
Well thats an issue because im not sure if this my right PIT FILE for this phone. Because usually it will go smoothly for these manual updates using Odin and this is my first encountering this error. And my fault i didnt backup my ROM which i should have done first before getting excited with this KitKat for my Note 3. That CSC file i got that from this site http://forum.xda-developers.com/showthread.php?t=2613374 and just followed instructions on how to do it, but it will just give me that error when i try to apply that method. But here's the PIT file that i got from that download.
I think its on a wrong region because i got that leaked update here http://www.sammobile.com/2014/01/13...kitkat-rolling-out-to-galaxy-note-3-sm-n9005/ and it looks like from Poland? does that matter? because my Note 3 is and HK version?
I have done so many phones rooted them and install custom roms this is the first time it failed on me. And funny thing is its my own cell phone lol
Click to expand...
Click to collapse
You gave me the pit file from the zip. I was asking for the one from your phone.
But anyway I found one for the 16GB version somehwere. I am taking a look at it. Will try editing it to fit your needs. Give me a little while.
And yes, it matters, because the pit file determines the sizes of the various partitions. Since yours is a 16GB version, the pit from a 32GB won't work.
View attachment Modded_16GB.tar
Try flashing this tar file. Put it in the CSC part of the Odin.
Though I can't guarantee anything. First time, I am doing anything like this.
FeralFire said:
View attachment 2520563
Try flashing this tar file. Put it in the CSC part of the Odin.
Though I can't guarantee anything. First time, I am doing anything like this.
Click to expand...
Click to collapse
Thanks
Odin just crashed on me while it was on SET PARTITION

odin question

im trying to install stock firmware on bell im using file from sams mobile i337mvlucmk5 unzip file its in tar file i put phone in download mode and try to install file with odin and it fails. now it says odin program failled.ive reinstall the odin program same thing hellllp
ron31 said:
im trying to install stock firmware on bell im using file from sams mobile i337mvlucmk5 unzip file its in tar file i put phone in download mode and try to install file with odin and it fails. Now it says odin program failled.ive reinstall the odin program same thing hellllp
Click to expand...
Click to collapse
what version of odin do you have? And are you placing the .tar in the correct slot? What error message does it give out in that little window it wouldnt happen to fail at [nand (auth) fail!!] would it?
X_DroiD_X said:
what version of odin do you have? And are you placing the .tar in the correct slot? What error message does it give out in that little window it wouldnt happen to fail at [nand (auth) fail!!] would it?
Click to expand...
Click to collapse
im using version 3.07 im placing tar in pda it fails nan write start then fails i have repartion un checked
ron31 said:
im using version 3.07 im placing tar in pda it fails nan write start then fails i have repartion un checked
Click to expand...
Click to collapse
about the odin sayin it fail dont worry about that its based off timer after running for certain time it shuts itself off but as suppose to your file flash smh thats what i was trying to say bu yaks my friend you got yourself a bad signatures tar what exactly is the case here bro? like are your trying to unroot? or whats happening brief me on it like why your trying to reflash stock that way can help you better or least point you in the right direction you can find my contact info on my op faster response time quicker replies
if your phone happens to turn on at all navigate to about device and take a screen shot for capturing model built n baseband and add model number please carrier as well
X_DroiD_X said:
about the odin sayin it fail dont worry about that its based off timer after running for certain time it shuts itself off but as suppose to your file flash smh thats what i was trying to say bu yaks my friend you got yourself a bad signatures tar what exactly is the case here bro? like are your trying to unroot? or whats happening brief me on it like why your trying to reflash stock that way can help you better or least point you in the right direction you can find my contact info on my op faster response time quicker replies
if your phone happens to turn on at all navigate to about device and take a screen shot for capturing model built n baseband and add model number please carrier as well
Click to expand...
Click to collapse
I believe Odin V 3.09 works better. Also it must be flashed in the PDA slot
hednik said:
I believe Odin V 3.09 works better. Also it must be flashed in the PDA slot
Click to expand...
Click to collapse
it all started when i tied to restore file with cwm recovery and it wouldn t install i tried a few times it wouldn t install backup.it reboot it would stay on samsung logo. i whent to download mode to install factory firmware odin fails the blue bar on phone moved just a little and stays there now i cant even go to recovery to do a factory reset it vibrates shows the little blue writing at top of screen then it reboots to samsung logo, i tried another factory file from here same issue i tried a different odin 1.85program same results
ron31 said:
it all started when i tied to restore file with cwm recovery and it wouldn t install i tried a few times it wouldn t install backup.it reboot it would stay on samsung logo. i whent to download mode to install factory firmware odin fails the blue bar on phone moved just a little and stays there now i cant even go to recovery to do a factory reset it vibrates shows the little blue writing at top of screen then it reboots to samsung logo, i tried another factory file from here same issue i tried a different odin 1.85program same results
Click to expand...
Click to collapse
So you are using 3.07 and you can put it in download mode ? Are you then able to have the device recognized by odin ? You are then trying to flash the same firmware that came on your phone stock ?
hednik said:
So you are using 3.07 and you can put it in download mode ? Are you then able to have the device recognized by odin ? You are then trying to flash the same firmware that came on your phone stock ?
Click to expand...
Click to collapse
yes odin reconizes phone i downloaded firmware from sams mobile for bell i337m
Based of at&t, t-mbl, bell roger virgin mobile fix mk2/mj9 mdl/mi9 4.3
ron31 said:
it all started when i tied to restore file with cwm recovery and it wouldn t install i tried a few times it wouldn t install backup.it reboot it would stay on samsung logo. i whent to download mode to install factory firmware odin fails the blue bar on phone moved just a little and stays there now i cant even go to recovery to do a factory reset it vibrates shows the little blue writing at top of screen then it reboots to samsung logo, i tried another factory file from here same issue i tried a different odin 1.85program same results
Click to expand...
Click to collapse
PROCEED AT OWN RISK!!
IF THE ONLY THE DOWNLOAD IS COMING UP BRO NOTHING ELSE YOUR WHOLE FILE SYSTEM IS CORRUPTED AND UR EFS ALL GONE G YOU NEED TO DO A NAND FLASH GET YOURSELF ODIN 3.09V LEME KNO WHEN YOU GOT THAT IN THE MEAN TIME AMA GATHER SOME OF MY PERSONAL FILES FOR YOU INTO A ZIP TO HELP YOU OUT I KNO HOW THAT FEELS WAS IN YOUR SHOES THAN AGAIN EVERYBODY HAS ITS JUS TO BAD HOW SOME OF THE SENIORITY MEMBERS HERE FORGET ABOUT THERE NOOB DAYS LIKE THEY WAS BORN DEVS (NOT THAT AM SAYIN UR A NOOB) these should help you out------>>>>>>>:good:http://https://docs.google.com/open?id=0B1ZauuplxoZsYllTT3Z4YnlWc1k
X_DroiD_X said:
PROCEED AT OWN RISK!!
IF THE ONLY THE DOWNLOAD IS COMING UP BRO NOTHING ELSE YOUR WHOLE FILE SYSTEM IS CORRUPTED AND UR EFS ALL GONE G YOU NEED TO DO A NAND FLASH GET YOURSELF ODIN 3.09V LEME KNO WHEN YOU GOT THAT IN THE MEAN TIME AMA GATHER SOME OF MY PERSONAL FILES FOR YOU INTO A ZIP TO HELP YOU OUT I KNO HOW THAT FEELS WAS IN YOUR SHOES THAN AGAIN EVERYBODY HAS ITS JUS TO BAD HOW SOME OF THE SENIORITY MEMBERS HERE FORGET ABOUT THERE NOOB DAYS LIKE THEY WAS BORN DEVS (NOT THAT AM SAYIN UR A NOOB) these should help you out------>>>>>>>:good:http://https://docs.google.com/open?id=0B1ZauuplxoZsYllTT3Z4YnlWc1k
Click to expand...
Click to collapse
iok thanks bro ill try tonight
ron31 said:
iok thanks bro ill try tonight
Click to expand...
Click to collapse
ok i have odin 3.09 installed i tried to open link you put in post wont open
ron31 said:
ok i have odin 3.09 installed i tried to open link you put in post wont open
Click to expand...
Click to collapse
Did you do a checksum on the file you downloaded? I tried installing a modem on my i337m, same thing odin failed... downloaded the same file from a different source and success... unfortunately there was no md5 number on the file to do a checksum or I would have done that first.... when it comes to stuff like this I alway do checksum if the md5 is provided... (most times it is)
Gage_Hero said:
Did you do a checksum on the file you downloaded? I tried installing a modem on my i337m, same thing odin failed... downloaded the same file from a different source and success... unfortunately there was no md5 number on the file to do a checksum or I would have done that first.... when it comes to stuff like this I alway do checksum if the md5 is provided... (most times it is)
Click to expand...
Click to collapse
no how do you do that
ron31 said:
no how do you do that
Click to expand...
Click to collapse
Download checksum tool from here http://download.cnet.com/MD5-SHA-Checksum-Utility/3000-2092_4-10911445.html its free. Then you find the md5 number on the site you downloaded from and use the tool to compare the numbers, typically you navigate to the directory the file is in (this gives you the md5 number, then you copy paste the md5 number from the site, then click the compare button, if they don't match your download is not good and should download again and repeat the checksum.
Gage_Hero said:
Download checksum tool from here http://download.cnet.com/MD5-SHA-Checksum-Utility/3000-2092_4-10911445.html its free. Then you find the md5 number on the site you downloaded from and use the tool to compare the numbers, typically you navigate to the directory the file is in (this gives you the md5 number, then you copy paste the md5 number from the site, then click the compare button, if they don't match your download is not good and should download again and repeat the checksum.
Click to expand...
Click to collapse
hey thanks ill give it a try

Seriously NEED HELP (S4 Bricked) !!!!!!

i have a verizon s4. i tried to install custom rom in it now i am stuck at this screen which says " downloading.." "do not turn off target"
i tried every version of odin and multiple roms to flash but it says " SW RV. CHECK FAIL : FUSED 5 : BINARY 1"
WHAT ???? IS THAT ??
You might probably have flashed the wrong firmware for your device or Downgraded to older version. I am Attaching a link here please go through it carefully and try recovering your phone with care.
http://forum.xda-developers.com/showthread.php?t=2511880
This is for Note 3 but you can follow the same for yours, download the stock and latest available firmware (KITKAT 4.4.2) for your phone and flash via odin.
tune345 said:
i have a verizon s4. i tried to install custom rom in it now i am stuck at this screen which says " downloading.." "do not turn off target"
i tried every version of odin and multiple roms to flash but it says " SW RV. CHECK FAIL : FUSED 5 : BINARY 1"
WHAT ???? IS THAT ??
Click to expand...
Click to collapse
You are at the wrong forum. This is not for the verizon s4. Go there for anwsers.
Probably you just need to reflash stock firmware or something.
Aamirx12 said:
You might probably have flashed the wrong firmware for your device or Downgraded to older version. I am Attaching a link here please go through it carefully and try recovering your phone with care.
http://forum.xda-developers.com/showthread.php?t=2511880
This is for Note 3 but you can follow the same for yours, download the stock and latest available firmware (KITKAT 4.4.2) for your phone and flash via odin.
Click to expand...
Click to collapse
secure check fail sbl1
tune345 said:
secure check fail sbl1
Click to expand...
Click to collapse
what you did this time, please post in detail.
Get your official firmware from http://www.sammobile.com/firmwares/
register there, then download the firmware for your phone( Please check beneath your battery the proper info about your phone and download the same for your phone)
Aamirx12 said:
what you did this time, please post in detail.
Get your official firmware from http://www.sammobile.com/firmwares/
register there, then download the firmware for your phone( Please check beneath your battery the proper info about your phone and download the same for your phone)
Click to expand...
Click to collapse
i am downloading the firmware from sammobile it was showing me 3 hours to download so i download the same file from a different location , that might be a problem i guess.
but i used odin 3.07 and 3.04
it is showing me the same error
i am about to tried the official rom in a few minutes from the sammobile.
flash the appropriate one.. and reply after flashing
ok so after trying the rom from sammobile it's showing me the same error.
i am attaching pictures for details , please help !!! .... am goingggggg nutssss !!:crying:
took off from work just to do this lol
tune345 said:
ok so after trying the rom from sammobile it's showing me the same error.
i am attaching pictures for details , please help !!! .... am goingggggg nutssss !!:crying:
took off from work just to do this lol
Click to expand...
Click to collapse
Which ROM you were using before all this happened
tune345 said:
ok so after trying the rom from sammobile it's showing me the same error.
i am attaching pictures for details , please help !!! .... am goingggggg nutssss !!:crying:
took off from work just to do this lol
Click to expand...
Click to collapse
You should go to the forum for you device. This forum is NOT for you device.
http://forum.xda-developers.com/sitesearch.php?q=SW REV. CHECK FAIL
And because you posted little usefull information in this topic it's hard to help.
Aamirx12 said:
Which ROM you were using before all this happened
Click to expand...
Click to collapse
i was using the stock ROM when i tried to install cyanogen few months back but the processed did not go through successfully so now when i start the phone i get the samsung custom logo.
so i was using that for months now because it did let me go thru normally even though the process of installing cyanogen didn't completed. So i think i messed up some internal files.
but phone was working good and everything until when i wanted to factory reset , it goes into odin mode and then gives me that error no matter
what version or Stock rom i use
Mod Edit
Please post in your variant's forum:
http://forum.xda-developers.com/forumdisplay.php?f=2314
Thread closed
malybru
Forum Moderator

software update failed sm910v

I tried downgrading after looking everywhere for a possible problem with odin.. I was on the latest cpg2 and odined the bp1 firmware for 5.1 and it stuck on rpm or something like that forgive me but i cant recall..I pulled it after 20 min and then got a software update error..and no matter what firmware i tried to put on its stuck on get pit for mapping.. My computer sees it as a device MSM8960.. So kies ng. Odin works but cant pass pit Please anyone i know with latest update I should not of done this..I even tried latest firmware it was on but same error
davekaz said:
I tried downgrading after looking everywhere for a possible problem with odin.. I was on the latest cpg2 and odined the bp1 firmware for 5.1 and it stuck on rpm or something like that forgive me but i cant recall..I pulled it after 20 min and then got a software update error..and no matter what firmware i tried to put on its stuck on get pit for mapping.. My computer sees it as a device MSM8960.. So kies ng. Odin works but cant pass pit Please anyone i know with latest update I should not of done this..I even tried latest firmware it was on but same error
Click to expand...
Click to collapse
Restart pc and try latest firmware again
Trex888 said:
Restart pc and try latest firmware again[/QU
THANKS FOR REPLY ive tried every imaginable firmware for it including newest it was on and still get pit error
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
Restart pc and try latest firmware again[/QU
THANKS FOR REPLY ive tried every imaginable firmware for it including newest it was on and still get pit error
Click to expand...
Click to collapse
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82[/QUOTE
Thanks again
placing a specific pit fit got me pass map and now gets stuck at hlo bin.. I think the downgrade firmware changed something cause windows sees phone as device called msm8960 . Odin sees it as far as a com port but beyond that its not a 910v anymore
Click to expand...
Click to collapse
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
davekaz said:
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82[/QUOTE
Thanks again
placing a specific pit fit got me pass map and now gets stuck at hlo bin.. I think the downgrade firmware changed something cause windows sees phone as device called msm8960 . Odin sees it as far as a com port but beyond that its not a 910v anymore
Click to expand...
Click to collapse
Try different odin version and different usb cable
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Trex888 said:
Try different odin version and different usb cable
Click to expand...
Click to collapse
I tried several versions of odin and its definitely not cord
Thanks again
Click to expand...
Click to collapse
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
davekaz said:
I tried several versions of odin and its definitely not cord
Thanks again
Click to expand...
Click to collapse
Try this method if your bootloader is unlocked or you got developer edition n910v.
Flash twrp in odin
Make complete wipe 3× 3 times
(dalvik cache/data/cache/system/internal storage)
After wipe go to download mode
Close odin and open again as (run as administrator)& upload firmware (AP)
Hit start Flash firmware
After flash firmware DONT LET THE PHONE BOOT
go to recovery
Wile cache & data factory reset
Reboot & wait 5 to 10 minutes.
Report back
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Trex888 said:
Try this method if your bootloader is unlocked or you got developer edition n910v.
Flash twrp in odin
Make complete wipe 3× 3 times
(dalvik cache/data/cache/system/internal storage)
After wipe go to download mode
Close odin and open again as (run as administrator)& upload firmware (AP)
Hit start Flash firmware
After flash firmware DONT LET THE PHONE BOOT
go to recovery
Wile cache & data factory reset
Reboot & wait 5 to 10 minutes.
Report back
Click to expand...
Click to collapse
thanks for trying but I just bought the phone and was trying to downgrade to unlock..so dont think twrp will take..
I appreciate all you help but im screwed
Click to expand...
Click to collapse
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
Restart pc and try latest firmware again[/QU
THANKS FOR REPLY ive tried every imaginable firmware for it including newest it was on and still get pit error
Click to expand...
Click to collapse
Did you solve your issue?
Click to expand...
Click to collapse
I did it..! SOLVED..!
alca00 said:
davekaz said:
Did you solve your issue?
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
Click to expand...
Click to collapse
I did it..! Using this repair firmware, I have repaired my Samsung N910V. Many thanks to Trex888..! I just flashed it by Odin using this file, and I hope this can help others with same issue (soft bricked Note4 N910V).
Thanks a lot again Trex888..!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
alca00 said:
alca00 said:
Trex888 said:
I did it..! Using this repair firmware, I have repaired my Samsung N910V. Many thanks to Trex888..! I just flashed it by Odin using this file, and I hope this can help others with same issue (soft bricked Note4 N910V).
Thanks a lot again Trex888..!
Click to expand...
Click to collapse
Congrats ! Glad to hear that .
Click to expand...
Click to collapse
Click to expand...
Click to collapse
alca00 said:
davekaz said:
Did you solve your issue?
Click to expand...
Click to collapse
yes it was the damned usb cord..Lol everything went smooth after that
Thanks to all
Click to expand...
Click to collapse
I had same issue, fail on all firmware (Verizon Note 4), changed usb cord, flashed back to stock and was even able to downgrade (5.0.1).
Pls help me out guys.....my two weeks old samsung note 4 is stock on Software Update Failed
Your device didnt update successfully. Use the Verizon Software Repair Assistant on a computer to repair your device and complete the update.
My phone details:
Model: SM-N910V
SKU: SMN910VZKE
Thanks.
Does anyone have this file? The page is dead.
Dear all,
i got a samsung Note 4 . Device had a sticker SM-910 F with matching imei on software. One day I hard rest my device then it imei shows Null and it became restart after 1 to 2 minutes in lop. this device has Verizon mother board. and also do not show the usb cable option. I want to install Verison stock firmware but no device detected in odin. Kindly anyone help me to install firmware through SD
Sumupali said:
Dear all,
i got a samsung Note 4 . Device had a sticker SM-910 F with matching imei on software. One day I hard rest my device then it imei shows Null and it became restart after 1 to 2 minutes in lop. this device has Verizon mother board. and also do not show the usb cable option. I want to install Verison stock firmware but no device detected in odin. Kindly anyone help me to install firmware through SD
Click to expand...
Click to collapse
A 910F with a Verizon mobo?
Might be tricky to flash.
You can access download mode?
Tried different cables / USB ports?
I really doubt that you can flash stock ROM from SD when phone is boot looping.
Maybe with terminal but you would have to flash TWRP for that first.

Categories

Resources