Database Users

[GUIDE] How to use Odin for GT-I9070

Odin is the saviour tool for all Samsung devices. The method for flashing by Odin differs from device to device.
This thread will give step by step instructions on how to flash a stock rom from Odin on the GT-I9070/p :
A. Download Odin tools from here : http://d-h.st/3zJ
Pass : shaaan
B. Download the stock rom from www.samfirmware.com
Setting up Odin :
1. Make sure you have installed the necessary drivers for this device. The drivers can be installed from within KIES or seperately. (I will upload the drivers shortly).
2. Run Odin as administrator.
3. Setting up the files is divided in two types depending on the firmware type :
a. If the firmware is a multi package file, put the files in the corresponding sections.
ie. CSC file in CSC section, PDA file in PDA section.
b. If the firmware is a single package, add the single file in the PDA section.
4. Now that Odin is setup, put the phone in download mode. To do that, power off the phone and press 'home+power+volume down' buttons together. Keep the buttons pressed till Download mide appears.
5. Now that Odin and the phone are setup, connect the phone to the device. Odin will detect the device and show something like 'com port (1)'
6. Flash the device.
7. The flash will take 5 minutes for a full flash on average.
8. When the flashing is complete, DO NOT remove the device until Odin shows ' PASS '.
9. The device will reboot. Remove the device, go to recovery mode and do a factory/data reset.
That's it. Happy flashing peeps..!!

Awesome guide mate - messing around with our device without Odin is risky !

This should be sticky. A lot of people is asking how to revert to original FW, or similiar questions that is connected to reverting. And it is almost at the end of forum, and thay cant see it.

I pmed the mods to do it. But they won't budge..
Please pm them..

Nice guide!!!
And adding images would be a nice option.
And plz add a point which tells which buttons to press like
"Re-Partition" ,"Auto Reboot","F.Reset Time" ,"Flash Lock"......
Sent from my GT-I9070 using xda premium

Very good guide,good work !
It may be better if you add some images

atishey23 said:
Nice guide!!!
And adding images would be a nice option.
And plz add a point which tells which buttons to press like
"Re-Partition" ,"Auto Reboot","F.Reset Time" ,"Flash Lock"......
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
From what I was able to find in other guides it is ONLY 'Auto Reboot' and 'F. Reset Time' to be checked.
All others to be unchecked.
There are some posts not to bother with that .pit file that is inside Odin .zip file.
Odin package from sammobile got 2 .pit files for 8GB - GT-I9070_EUR_XX_8G and GT-I9070_EUR_XX_8G_20111220_KL6 and one for 16GB
(at least paired with XEO region XXLD1) not only that one we got in link form 1st post.
I was also able to find some info that if you use .pit check also 'Re-Partition'.
Now I am curious about if It would be good idea for me to actually Re-Partition my phone - bought it used (not new) and my PC detects only 4GB of internal SD. Will it increase custom binary counter? (so far it is at 0 and I would rather keep it that way)
Is it going to fix that issue so I will be able to use all 8GB (minus system partition)?
If so how to use it and what .pit file to take?
.pit only, re-partition only and run it once, then single-package as PDA with reboot and F. Reset on another flash run?
Or maybe all at once?
BTW you guys ROCK.
Rooted SGS i9000 2 years ago with this forum and now I am very close to do it again with SGSA.

th3cr0w said:
From what I was able to find in other guides it is ONLY 'Auto Reboot' and 'F. Reset Time' to be checked.
All others to be unchecked.
There are some posts not to bother with that .pit file that is inside Odin .zip file.
Odin package from sammobile got 2 .pit files for 8GB - GT-I9070_EUR_XX_8G and GT-I9070_EUR_XX_8G_20111220_KL6 and one for 16GB
(at least paired with XEO region XXLD1) not only that one we got in link form 1st post.
I was also able to find some info that if you use .pit check also 'Re-Partition'.
Now I am curious about if It would be good idea for me to actually Re-Partition my phone - bought it used (not new) and my PC detects only 4GB of internal SD. Will it increase custom binary counter? (so far it is at 0 and I would rather keep it that way)
Is it going to fix that issue so I will be able to use all 8GB (minus system partition)?
If so how to use it and what .pit file to take?
.pit only, re-partition only and run it once, then single-package as PDA with reboot and F. Reset on another flash run?
Or maybe all at once?
BTW you guys ROCK.
Rooted SGS i9000 2 years ago with this forum and now I am very close to do it again with SGSA.
Click to expand...
Click to collapse
It is normal to have 4GB on internall SD. The rest of it goes to system partition, application partition and RAM I think...

shut_down said:
It is normal to have 4GB on internal SD. The rest of it goes to system partition, application partition and RAM I think...
Click to expand...
Click to collapse
googled a bit more and found it out too :crying:
BTW - both of those 8GB .pit files are identical (according to 'comp' tool in windows) so there is no reason to use re-partition - other than sth went totally wrong and you are trying to recover from brick or sth serious as this .pit file is already on your device.
Just flashed unbranded stock for XEO region - original one was branded.
NOTE to anyone who is still thinking about safety of this method:
After initial reboot - when it was reconfiguring in recovery mode - or however you will call it (just before odin should say 'pass' - still in that little font screen) windows started to reinstall usb drivers - odin log in bottom corner said 'disconnected' and even then my newly flashed ROM is working as it should. I would rather keep it connected till Odin confirms all went as intended but in case of similar issue - do not get heart attack

odin is used for flashing stock roms only???

Kulwinder Singh said:
odin is used for flashing stock roms only???
Click to expand...
Click to collapse
nope it can also be used to flash custom Roms and kernels though flashing custom kernels via odin will increase your bin counter !

Hello guys...
How are you? I´m new on the i9070 threads!!! I´ve had others phones before, like SG2, xperia sola, live with walkman... so, i need the password to descompress odin... i search on thread but i don´t found it...
SORRY I found the password... shaaan

Of what I understand, can I test an unlimited number of stock firmware and the binary counter remain 0?
If I flash an unbranded firmware can I use SIM cards from other providers?
Now my phone is branded and I can not use SIM cards from other providers.
Thanks.

Kulwinder Singh said:
odin is used for flashing stock roms only???
Click to expand...
Click to collapse
Read please, sir!
http://forum.xda-developers.com/showthread.php?t=1985199
:laugh:

Someone help me? LINK

Hi i have downloaded the russian jelly bean 4.1.2 package but when i tries to flash it using odin3 v1.83 it shows me "The Parameter is incorrect" why???

sonimayurp said:
Hi i have downloaded the russian jelly bean 4.1.2 package but when i tries to flash it using odin3 v1.83 it shows me "The Parameter is incorrect" why???
Click to expand...
Click to collapse
Try to remove .md5 from filename.

shut_down said:
Try to remove .md5 from filename.
Click to expand...
Click to collapse
Hmm it worked thx..

Flash JB
Hi, I want to flash Jelly Bean , do i need to use the pit file , or just select one package and then select the rom??
Edit : flashed

This version of Odin does not work when flashing JB to my device.
I successfully used Odin3v3.07 from this post: http://forum.xda-developers.com/showthread.php?t=2086965
Please update this guide. I spent quite a lot of time trying to figure out what was wrong.
Thanks

Samsung Galaxy Y Wont turn on problem help asap

Samsung Galaxy Y, Idk what problem I have but im really confused now withh all the non sense. Idk if its looping or not cus sometimes it boots. then after a few minutes turns off again. I can go to Volume up+ home button + lock button then i tried the system recovery. it worked but then it booted up then after a few minutes same problem. Now it turns on and off and whatever. I tried the odin stuff. I downloaded usb drives then odin and the md5 thing. I tried first. it didnt show ready on the odin while i was on download. then next it showed a blue thing so i thought it was ready. I clicked the PDA with md5 in it. then clicked start. but it said FAILED. now idk what to do.
what else can I do and can someone pleaseee explain it step by step. thank you

Download the firmware files for your country from dokys thread at the top of of dev section
If you have kies installed stop it from running or Uninstall it
Install Samsung drivers http://forum.xda-developers.com/showthread.php?p=11498043
connect phone to pc
put phone in download mode (vol down home & power button)
right click on the odin icon and run as administrator
place csc file in csc
Modem in phone
Pda in pda
start flashing process
Do not repartition or use pit file

marcussmith2626 said:
Download the firmware files for your country from dokys thread at the top of of dev section
If you have kies installed stop it from running or Uninstall it
Install Samsung drivers http://forum.xda-developers.com/showthread.php?p=11498043
connect phone to pc
put phone in download mode (vol down home & power button)
right click on the odin icon and run as administrator
place csc file in csc
Modem in phone
Pda in pda
start flashing process
Do not repartition or use pit file
Click to expand...
Click to collapse
what is csc file and modem. I only have pda file named recovery.tar.md5

MeetJunx said:
what is csc file and modem. I only have pda file named recovery.tar.md5
Click to expand...
Click to collapse
Goto dokys thread in dev section!!! (sticky at top for odin firmware)
Download the firmware for your country
unzip the file & you will find modem pda & csc
Please just follow what I say - read dokys thread and you will have all your answers

his rponele
marcussmith2626 said:
Goto dokys thread in dev section!!! (sticky at top for odin firmware)
Download the firmware for your country
unzip the file & you will find modem pda & csc
Please just follow what I say - read dokys thread and you will have all your answers
Click to expand...
Click to collapse
Okay thank you I think this is what I need. but i'll do this tomorrow. But one more question. What will I download here? theres like 5? im from the Philippines. Thank you

MeetJunx said:
Okay thank you I think this is what I need. but i'll do this tomorrow. But one more question. What will I download here? theres like 5? im from the Philippines. Thank you
Click to expand...
Click to collapse
Iv no idea which is latest one for you
as a guide the first two letters represent region - xx = European then the further down alphabet next letter is the newer it is

marcussmith2626 said:
Iv no idea which is latest one for you
as a guide the first two letters represent region - xx = European then the further down alphabet next letter is the newer it is
Click to expand...
Click to collapse
so I followed everything. I have the csc modem and pda. But when it almost finishes like the green thing is almost done. The Cellphone turns off. resulting to failure. What do I do next?

already tried to flash it back/again on stock rom ? maybe it will help
im from philipines too

MeetJunx said:
so I followed everything. I have the csc modem and pda. But when it almost finishes like the green thing is almost done. The Cellphone turns off. resulting to failure. What do I do next?
Click to expand...
Click to collapse
It will turn off normally - leave it don't interrupt it or try another firmware

akosicarlo said:
already tried to flash it back/again on stock rom ? maybe it will help
im from philipines too
Click to expand...
Click to collapse
hey, Idk what flash or stock rom is. but im googling it right now. and im looking at a video. will this solve my problem with it turning off?

yeah ....
flash stock rom thru odin
note: after the process had been complete it will AUTO REBOOT (dont do anything on the phone) unless it already boot up

odin question

im trying to install stock firmware on bell im using file from sams mobile i337mvlucmk5 unzip file its in tar file i put phone in download mode and try to install file with odin and it fails. now it says odin program failled.ive reinstall the odin program same thing hellllp

ron31 said:
im trying to install stock firmware on bell im using file from sams mobile i337mvlucmk5 unzip file its in tar file i put phone in download mode and try to install file with odin and it fails. Now it says odin program failled.ive reinstall the odin program same thing hellllp
Click to expand...
Click to collapse
what version of odin do you have? And are you placing the .tar in the correct slot? What error message does it give out in that little window it wouldnt happen to fail at [nand (auth) fail!!] would it?

X_DroiD_X said:
what version of odin do you have? And are you placing the .tar in the correct slot? What error message does it give out in that little window it wouldnt happen to fail at [nand (auth) fail!!] would it?
Click to expand...
Click to collapse
im using version 3.07 im placing tar in pda it fails nan write start then fails i have repartion un checked

ron31 said:
im using version 3.07 im placing tar in pda it fails nan write start then fails i have repartion un checked
Click to expand...
Click to collapse
about the odin sayin it fail dont worry about that its based off timer after running for certain time it shuts itself off but as suppose to your file flash smh thats what i was trying to say bu yaks my friend you got yourself a bad signatures tar what exactly is the case here bro? like are your trying to unroot? or whats happening brief me on it like why your trying to reflash stock that way can help you better or least point you in the right direction you can find my contact info on my op faster response time quicker replies
if your phone happens to turn on at all navigate to about device and take a screen shot for capturing model built n baseband and add model number please carrier as well

X_DroiD_X said:
about the odin sayin it fail dont worry about that its based off timer after running for certain time it shuts itself off but as suppose to your file flash smh thats what i was trying to say bu yaks my friend you got yourself a bad signatures tar what exactly is the case here bro? like are your trying to unroot? or whats happening brief me on it like why your trying to reflash stock that way can help you better or least point you in the right direction you can find my contact info on my op faster response time quicker replies
if your phone happens to turn on at all navigate to about device and take a screen shot for capturing model built n baseband and add model number please carrier as well
Click to expand...
Click to collapse
I believe Odin V 3.09 works better. Also it must be flashed in the PDA slot

hednik said:
I believe Odin V 3.09 works better. Also it must be flashed in the PDA slot
Click to expand...
Click to collapse
it all started when i tied to restore file with cwm recovery and it wouldn t install i tried a few times it wouldn t install backup.it reboot it would stay on samsung logo. i whent to download mode to install factory firmware odin fails the blue bar on phone moved just a little and stays there now i cant even go to recovery to do a factory reset it vibrates shows the little blue writing at top of screen then it reboots to samsung logo, i tried another factory file from here same issue i tried a different odin 1.85program same results

ron31 said:
it all started when i tied to restore file with cwm recovery and it wouldn t install i tried a few times it wouldn t install backup.it reboot it would stay on samsung logo. i whent to download mode to install factory firmware odin fails the blue bar on phone moved just a little and stays there now i cant even go to recovery to do a factory reset it vibrates shows the little blue writing at top of screen then it reboots to samsung logo, i tried another factory file from here same issue i tried a different odin 1.85program same results
Click to expand...
Click to collapse
So you are using 3.07 and you can put it in download mode ? Are you then able to have the device recognized by odin ? You are then trying to flash the same firmware that came on your phone stock ?

hednik said:
So you are using 3.07 and you can put it in download mode ? Are you then able to have the device recognized by odin ? You are then trying to flash the same firmware that came on your phone stock ?
Click to expand...
Click to collapse
yes odin reconizes phone i downloaded firmware from sams mobile for bell i337m

Based of at&t, t-mbl, bell roger virgin mobile fix mk2/mj9 mdl/mi9 4.3
ron31 said:
it all started when i tied to restore file with cwm recovery and it wouldn t install i tried a few times it wouldn t install backup.it reboot it would stay on samsung logo. i whent to download mode to install factory firmware odin fails the blue bar on phone moved just a little and stays there now i cant even go to recovery to do a factory reset it vibrates shows the little blue writing at top of screen then it reboots to samsung logo, i tried another factory file from here same issue i tried a different odin 1.85program same results
Click to expand...
Click to collapse
PROCEED AT OWN RISK!!
IF THE ONLY THE DOWNLOAD IS COMING UP BRO NOTHING ELSE YOUR WHOLE FILE SYSTEM IS CORRUPTED AND UR EFS ALL GONE G YOU NEED TO DO A NAND FLASH GET YOURSELF ODIN 3.09V LEME KNO WHEN YOU GOT THAT IN THE MEAN TIME AMA GATHER SOME OF MY PERSONAL FILES FOR YOU INTO A ZIP TO HELP YOU OUT I KNO HOW THAT FEELS WAS IN YOUR SHOES THAN AGAIN EVERYBODY HAS ITS JUS TO BAD HOW SOME OF THE SENIORITY MEMBERS HERE FORGET ABOUT THERE NOOB DAYS LIKE THEY WAS BORN DEVS (NOT THAT AM SAYIN UR A NOOB) these should help you out------>>>>>>>:good:http://https://docs.google.com/open?id=0B1ZauuplxoZsYllTT3Z4YnlWc1k

X_DroiD_X said:
PROCEED AT OWN RISK!!
IF THE ONLY THE DOWNLOAD IS COMING UP BRO NOTHING ELSE YOUR WHOLE FILE SYSTEM IS CORRUPTED AND UR EFS ALL GONE G YOU NEED TO DO A NAND FLASH GET YOURSELF ODIN 3.09V LEME KNO WHEN YOU GOT THAT IN THE MEAN TIME AMA GATHER SOME OF MY PERSONAL FILES FOR YOU INTO A ZIP TO HELP YOU OUT I KNO HOW THAT FEELS WAS IN YOUR SHOES THAN AGAIN EVERYBODY HAS ITS JUS TO BAD HOW SOME OF THE SENIORITY MEMBERS HERE FORGET ABOUT THERE NOOB DAYS LIKE THEY WAS BORN DEVS (NOT THAT AM SAYIN UR A NOOB) these should help you out------>>>>>>>:good:http://https://docs.google.com/open?id=0B1ZauuplxoZsYllTT3Z4YnlWc1k
Click to expand...
Click to collapse
iok thanks bro ill try tonight

ron31 said:
iok thanks bro ill try tonight
Click to expand...
Click to collapse
ok i have odin 3.09 installed i tried to open link you put in post wont open

ron31 said:
ok i have odin 3.09 installed i tried to open link you put in post wont open
Click to expand...
Click to collapse
Did you do a checksum on the file you downloaded? I tried installing a modem on my i337m, same thing odin failed... downloaded the same file from a different source and success... unfortunately there was no md5 number on the file to do a checksum or I would have done that first.... when it comes to stuff like this I alway do checksum if the md5 is provided... (most times it is)

Gage_Hero said:
Did you do a checksum on the file you downloaded? I tried installing a modem on my i337m, same thing odin failed... downloaded the same file from a different source and success... unfortunately there was no md5 number on the file to do a checksum or I would have done that first.... when it comes to stuff like this I alway do checksum if the md5 is provided... (most times it is)
Click to expand...
Click to collapse
no how do you do that

ron31 said:
no how do you do that
Click to expand...
Click to collapse
Download checksum tool from here http://download.cnet.com/MD5-SHA-Checksum-Utility/3000-2092_4-10911445.html its free. Then you find the md5 number on the site you downloaded from and use the tool to compare the numbers, typically you navigate to the directory the file is in (this gives you the md5 number, then you copy paste the md5 number from the site, then click the compare button, if they don't match your download is not good and should download again and repeat the checksum.

Gage_Hero said:
Download checksum tool from here http://download.cnet.com/MD5-SHA-Checksum-Utility/3000-2092_4-10911445.html its free. Then you find the md5 number on the site you downloaded from and use the tool to compare the numbers, typically you navigate to the directory the file is in (this gives you the md5 number, then you copy paste the md5 number from the site, then click the compare button, if they don't match your download is not good and should download again and repeat the checksum.
Click to expand...
Click to collapse
hey thanks ill give it a try

[Q] root for sm-t537v

First sorry if this has been asked the forum is rather large and sifting thru all the posts is a bit tedious. Is there a root out for the t537v module of the galaxy tab 4?
Thanks in advance

uroboch said:
First sorry if this has been asked the forum is rather large and sifting thru all the posts is a bit tedious.
Click to expand...
Click to collapse
Did you try towelroot?
Also don't keep saying what I quoted you on. Someone less nice than me is going to jump down your throat for it lol

thisisapoorusernamechoice said:
Did you try towelroot?
Also don't keep saying what I quoted you on. Someone less nice than me is going to jump down your throat for it lol
Click to expand...
Click to collapse
Thanks for the advice and yes i tried towel root it tells me "This Phone isn't Supported"

uroboch said:
First sorry if this has been asked the forum is rather large and sifting thru all the posts is a bit tedious. Is there a root out for the t537v module of the galaxy tab 4?
Thanks in advance
Click to expand...
Click to collapse
Hi ,
I think you have latest build now (4.4.4) , yes ? If yes , you must to try to flash via Odin older firmware http://www.sammobile.com/firmwares/download/34971/T537VVRU1ANE2_T537VVZW1ANE2_VZW/ from any source . Before flashing you must to do factory reset . Then to try Towelroot . Perhaps you must to try like here http://forum.xda-developers.com/showpost.php?p=58501194&postcount=245 . Then freeze or delete update service . If all will be fail , flash your last firmware again (for return back) .
Remember , you lost data when do factory reset .
You not afraid nothing .

repey6 said:
Hi ,
I think you have latest build now (4.4.4) , yes ? If yes , you must to try to flash via Odin older firmware http://www.sammobile.com/firmwares/download/34971/T537VVRU1ANE2_T537VVZW1ANE2_VZW/ from any source . Before flashing you must to do factory reset . Then to try Towelroot . Perhaps you must to try like here http://forum.xda-developers.com/showpost.php?p=58501194&postcount=245 . Then freeze or delete update service . If all will be fail , flash your last firmware again (for return back) .
Remember , you lost data when do factory reset .
You not afraid nothing .
Click to expand...
Click to collapse
Trying this now i will let you all know how it goes.

uroboch said:
Trying this now i will let you all know how it goes.
Click to expand...
Click to collapse
Sadly i couldn't get the old firmware to flash onto the device. if anyone has done this and had luck please let me know where you got the firmware and what you did to get it to work.
Thanks in advance.

uroboch said:
Sadly i couldn't get the old firmware to flash onto the device. if anyone has done this and had luck please let me know where you got the firmware and what you did to get it to work.
Thanks in advance.
Click to expand...
Click to collapse
Please wait little . I can to give you this firmware in the night .

Ready
UPD.Strangely, some problems with the archive. try to understand
Try this . May be you can to flash this tar-archive . If no , i will search new right archive .
See last post

I will try to fix it in afternoon

downloading the tar archive now i will let you know if i have success.
Thanks

uroboch said:
downloading the tar archive now i will let you know if i have success.
Thanks
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=95916177934538217
All is OK !
Archive is good . My tab shows that archive is bad . And my PC shows that archive is normal .

repey6 said:
https://www.androidfilehost.com/?fid=95916177934538217
All is OK !
Archive is good . My tab shows that archive is bad . And my PC shows that archive is normal .
Click to expand...
Click to collapse
the message I'm getting is SW REV CHECK FAIL : [aboot]Fused 2 > binary 1

uroboch said:
the message I'm getting is SW REV CHECK FAIL : [aboot]Fused 2 > binary 1
Click to expand...
Click to collapse
you flash archive from https://www.androidfilehost.com/?fid=95916177934538217 ?

That's the archive I'm using. I don't think I'm using Odin right.

uroboch said:
That's the archive I'm using. I don't think I'm using Odin right.
Click to expand...
Click to collapse
Instructions
 Extract (unzip) the firmware file
 Download Odin v3.09
 Extract Odin ZIP file
 Open Odin v.3.09
 Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
 Connect phone and wait until you get a blue sign in Odin
 Add the firmware file to AP / PDA
 Make sure re-partition is NOT ticked
 Click the start button, sit back and wait few minutes

uroboch said:
That's the archive I'm using. I don't think I'm using Odin right.
Click to expand...
Click to collapse
these are the directions I'm using to flash the device
http://primehowto.com/update-galaxy-tab-4-10-1-lte-verizon-sm-t537v-android-4-4-4-kitkat-t537vvru2ank1-official-firmware/
"How To Install T537VVRU2ANK1 Android 4.4.4 KitKat On Galaxy Tab 4 10.1 LTE (Verizon) SM-T537V Manually"
using the tar you gave me
Still getting above mentioned error on my device after i start the flash and it fails. Alas it appears i shall have to wait until someone figures out how to root the newest firmware.

uroboch said:
these are the directions I'm using to flash the device
http://primehowto.com/update-galaxy-tab-4-10-1-lte-verizon-sm-t537v-android-4-4-4-kitkat-t537vvru2ank1-official-firmware/
"How To Install T537VVRU2ANK1 Android 4.4.4 KitKat On Galaxy Tab 4 10.1 LTE (Verizon) SM-T537V Manually"
using the tar you gave me
Still getting above mentioned error on my device after i start the flash and it fails. Alas it appears i shall have to wait until someone figures out how to root the newest firmware.
Click to expand...
Click to collapse
So , good guide . Follow him . Unfortunately install this firmware does not work.
You dont try flash only older kernel like PDA via Odin ?

I also tried to flash using odin 3.07 and the PDA option but it fails.
Thanks again for all the help

uroboch said:
I also tried to flash using odin 3.07 and the PDA option but it fails.
Thanks again for all the help
Click to expand...
Click to collapse
Wait little i ask guru

repey6 said:
You dont try flash only older kernel like PDA via Odin ?
Click to expand...
Click to collapse
And why exactly shouldn't they try that? That's exactly what they're doing here I even contacted the moderator to verify that. Plus I used that method to re-root after I had to Odin back to complete factory stock. I don't see what the problem is flashing just an older kernel, rooting using towelroot, and then flashing the most current kernel. That's exactly how my tablet is rooted and was on the most current firmware (OA2) before I flashed Cyanogenmod

Hard Bricked N910F, MicroSD Download mode, can't flash anything

Hi!
Some time ago my n910F tottaly bricked(it was on Norma V11 ROM). After some reserch, i've managed to turn on download mode via microSD card and from there i've tried to flash BL,AP,CP and CSC. Unfortunately odin failed (PIT problem) so i've tried to flash PIT file. It crashed too. Phone restarted and, when it came back to download mode it was looking diffrent. Now there are 2 diffrent errors:
1. There is no PIT binary
2. Device have invalid PIT
What should i do now? I don't have any ideas Maybe awesome community of XDA will help me?
I've got less then 10 posts so to see my video you have to put "https://" before youtube...
youtu.be/eD7sjFtWfps

MarcinMilosz13 said:
Hi!
Some time ago my n910F tottaly bricked(it was on Norma V11 ROM). After some reserch, i've managed to turn on download mode via microSD card and from there i've tried to flash BL,AP,CP and CSC. Unfortunately odin failed (PIT problem) so i've tried to flash PIT file. It crashed too. Phone restarted and, when it came back to download mode it was looking diffrent. Now there are 2 diffrent errors:
1. There is no PIT binary
2. Device have invalid PIT
What should i do now? I don't have any ideas Maybe awesome community of XDA will help me?
I've got less then 10 posts so to see my video you have to put "https://" before youtube...
youtu.be/eD7sjFtWfps
Click to expand...
Click to collapse
Which formware was you trying to flash?

callumbr1 said:
Which formware was you trying to flash?
Click to expand...
Click to collapse
I've been using tutorial that recomended me to use those files:
BL: "BL_N910FXXU1DPI1_CL9117724_QB10791804_REV00_user_low_ship_MULTI_CERT" >> DPI1
AP:"AP_N910FXXU1DPI1_CL9117724_QB10791804_REV00_user_low_ship_MULTI_CERT" >> DPI1
CP:"CP_N910FXXU1DPH1_REV00_CL_2068963" >> DPH1
CSC: "CSC_VFR_N910FVFR1DPF1_CL8447885_QB10051693_REV00_user_low_ship_MULTI_CERT" >> DPF1
All of them failed (Probably not their fault) so i've tried to flash PIT file named "TRLTE_EUR_OPEN.pit" (i think it should be the proper one). Still no luck there. As you can see on the video ODIN fails that flashes

MarcinMilosz13 said:
I've been using tutorial that recomended me to use those files:
BL: "BL_N910FXXU1DPI1_CL9117724_QB10791804_REV00_user_low_ship_MULTI_CERT" >> DPI1
AP:"AP_N910FXXU1DPI1_CL9117724_QB10791804_REV00_user_low_ship_MULTI_CERT" >> DPI1
CP:"CP_N910FXXU1DPH1_REV00_CL_2068963" >> DPH1
CSC: "CSC_VFR_N910FVFR1DPF1_CL8447885_QB10051693_REV00_user_low_ship_MULTI_CERT" >> DPF1
All of them failed (Probably not their fault) so i've tried to flash PIT file named "TRLTE_EUR_OPEN.pit" (i think it should be the proper one). Still no luck there. As you can see on the video ODIN fails that flashes
Click to expand...
Click to collapse
You flashed the wrong pit!
Flash this firmware
https://www.sammobile.com/firmwares/download/116551/N910FXXU1DPL2_N910FBTU1DPL1_BTU/
With this pit at the same time.
https://drive.google.com/file/d/0BzyeAt2hy6XeVWFnVGM0dUNHbGM/view?usp=sharing
Make sure you check repartition in odin options

callumbr1 said:
You flashed the wrong pit!
Flash this firmware
https://www.sammobile.com/firmwares/download/116551/N910FXXU1DPL2_N910FBTU1DPL1_BTU/
With this pit at the same time.
https://drive.google.com/file/d/0BzyeAt2hy6XeVWFnVGM0dUNHbGM/view?usp=sharing
Make sure you check repartition in odin options
Click to expand...
Click to collapse
Still doesn't work PIT file that you gived to me looks exactly the same to the one that i used. Phone keeps saying that there is no pit binary, or "wrong PIT id".
Maybe there is a problem with that download mode? To turn it on i have to eject microSD card, while phone is reading "T-flash". And even then there is no android logo like it is on normal download mode. Only some writings...
Is there a way to flash PIT via microSD? Every time i start phone it keeps saying that it's copying from T-FLASH and after that it's rebooting...
The device bricked not becouse of bad flashing, so i'm starting to think that this is a hardware problem...

MarcinMilosz13 said:
Still doesn't work PIT file that you gived to me looks exactly the same to the one that i used. Phone keeps saying that there is no pit binary, or "wrong PIT id".
Maybe there is a problem with that download mode? To turn it on i have to eject microSD card, while phone is reading "T-flash". And even then there is no android logo like it is on normal download mode. Only some writings...
Is there a way to flash PIT via microSD? Every time i start phone it keeps saying that it's copying from T-FLASH and after that it's rebooting...
The device bricked not becouse of bad flashing, so i'm starting to think that this is a hardware problem...
Click to expand...
Click to collapse
http://forum.xda-developers.com/note-4/snapdragon-dev/note-4-debrick-img-t3488114/page30
Read this thread it will help you

little more details plz
MarcinMilosz13 said:
Hi!
Some time ago my n910F tottaly bricked(it was on Norma V11 ROM). After some reserch, i've managed to turn on download mode via microSD card and from there i've tried to flash BL,AP,CP and CSC. Unfortunately odin failed (PIT problem) so i've tried to flash PIT file. It crashed too. Phone restarted and, when it came back to download mode it was looking diffrent. Now there are 2 diffrent errors:
1. There is no PIT binary
2. Device have invalid PIT
What should i do now? I don't have any ideas Maybe awesome community of XDA will help me?
I've got less then 10 posts so to see my video you have to put "https://" before youtube...
youtu.be/eD7sjFtWfps
Click to expand...
Click to collapse
Hello,
Please provide more details. and plz consider these when unbricking....
{No 1 is most important i have been in this situation and only the official firmware accepted the pit file for me}
1. Download your official firmware from sammobile.com and try to flash that with the default pit file. (or try this one: https://dl.dropboxusercontent.com/u/84115590/SM-N910F_32GB.pit ) when you get your phone up and running you can root and flash any custom rom of your choice.
2. Files you trying to flash have really long file names. I know it does not cause a problem but when you are in trouble you must think about all the possibilities. Download files with shorter file names just in case.
3. Try to flash one file at a time.
Try and report will respond.
Thanks!

Hi!
I've got some problems with my PC, and then i had to pass kind of " school leaving exams" so i was absent here, at xda
Now back to the topic:
My phone still don't want to boot. @callumbr1 I've done everything that is in that link, before i even writed here . Thanks to that my phone turns on to the moment that is shown on the video. @hi_blues Everything that i've downloaded was either from sammobile or from some tutrials "how to debrick etc" here on xda. Link provided by you didn't changed anything
2. All of the official firmware that i found has long names, but i think that more important then name of actual file is lenght of path to access it So I've tried flashing directly from C://... but nothing helped.
3. So flashing one file at a time does nothing
Maybe some other ideas? Becouse my n910F bricked i had to switch to my fathers nokia 3310 (the old one). Well, i really lack some features like Camera, Internet or colorfull display