How to disable touch key light when using main touch screen - Verizon Galaxy S 5 Q&A, Help & Troubleshooting

When I tap the touch screen, the touch key light up, arent they suppose to light up when u actually press them, the menu and back touch key? problem is when ur playing games etc ur using the main touch screen only and this results in both the keys to remain lit up all the while, i want it to light up only when pressed. I m on rooted mm PF4 rom with unlocked bootloader. Is there any solution to disable touch key light when using main touch screen??

Related

Touchscreen Not Functioning Correctly

The screen on the my streak has been slowly degrading, to the point where i can barely do basic functions of the phone. It doesnt register touches or swipes a large percentage of the time. If I long press on the background to bring up the add shortcut widget popup, it usually will bring the phone back to 85% function. But if I lock the screen and try again, I have to go back to longpressing until I can click apps.
Often presses will register along the top bar and bring up the notification screen or short menu when I am clicking anywhere but on the top. It has happened several times while typing this.
Has anyone had Touchscreen problems with their Streaks?
Sent from my Dell Streak using XDA App
Do you have a screen protector on and maybe some debris between it on the screen?
I'd recommend aligning the screen.
User Manual said:
If necessary, you can calibrate your touch screen as follows:
1 Press and hold the power button and then touch the Power off option on the screen to turn off the device.
2 Simultaneously press and hold the volume up button and volume down button .
3 Without releasing the volume buttons, press and hold the power button , until the device turns on the configuration screen.
4 Press the volume buttons to move the highlight bar on the screen to the Screen calibration option.
5 Touch the Camera button to start the touch screen calibration. 6 Wait for the device to reboot.
Click to expand...
Click to collapse
Also you could enable the debuging mode by typing in *#*307#*#* in your dialer, then in your app list you should see some new apps.
Open up Dev tools the select Pointer Location
Also another one is EmList and then select "Touch_Panel" theres a handful of diagnostic tools there that are pretty fun to mess with to see if something is physically wrong with your screen
Oh and to hide/disable debugging mode, just type in *#*308#*#*
I do also have some screen issues i had 8105 went back to 8023 and was working fine until today that it was acting up, but is better than 8105 which only let me touch half the screen, now it lets me do about 80% of the screen from bottom to top. I do have a screen protector, when I was running 1.6 didn't see this issue. Also i noticed that sometimes when my fingers are a bit sweaty the touch input doesn't work that well.
No screen protector, stock 1.6. Will try debug, thanks.
It happens with sweaty hands with dry hands its just messed up.
Sent from my Dell Streak using XDA App
I just used the 6 step block method and it seems to have solved my issue. Help very much appreciated!
Sent from my Dell Streak using XDA App
How long did it take to reboot after you hit the camera button?
I had to do mine yesterday as the lower part of the screen wasn't registering touches properly, as if it was about 50 pixels out.
First time round it didn't boot up with the volume keys held so i popped the battery off and started again (seems to be a common issue with this device). Then it was pretty much as standard for the boot. Keep the buttons held til the menu pops up, choose calibration, leave it until it says it's done and then reboot.
Again, should reboot as normal but if it doesn't try popping the battery off. The rear cover seems to cause a fair few issues with this!!
oh and running the calibration fixed the issue for me!

How to turn backlight on with dpad or green or red button?

Hi all !
I've just used Niki100 for about a week (used Excalibur before). Just want to ask you guy one question
I'm using ROM WM 6.5.3 Lite by Rataplan.
When the device is locked, after 1 minute, the backlight offs and the system sleeps and I have to press the power button (on top) or slide the keypad up for it to turn the backlight on so I can slide to unlock the device.
My question is : is there anyway to turn the backlight on by pressing the green or red button or the dpad so I can slide to unlock the device ? I dont want to use the power button frequently cuz it may easily sink or slide the keypad up
Or in case it's impossible, is there anyway to turn the backlight off when the device is locked without put it in sleep ?
Thank everybody
Sorry for my bad english cuz i'm a vietnamese
TMinh said:
Hi all !
I've just used Niki100 for about a week (used Excalibur before). Just want to ask you guy one question
I'm using ROM WM 6.5.3 Lite by Rataplan.
When the device is locked, after 1 minute, the backlight offs and the system sleeps and I have to press the power button (on top) or slide the keypad up for it to turn the backlight on so I can slide to unlock the device.
My question is : is there anyway to turn the backlight on by pressing the green or red button or the dpad so I can slide to unlock the device ? I dont want to use the power button frequently cuz it may easily sink or slide the keypad up
Or in case it's impossible, is there anyway to turn the backlight off when the device is locked without put it in sleep ?
Thank everybody
Sorry for my bad english cuz i'm a vietnamese
Click to expand...
Click to collapse
try to setting your backlight feature on the system settings , hope so helps
start> setting >system>lock keys
check on (Do not lock buttons)

[Q] need help with my touch screen. tmous hd2

So recently i start flashing and using langthang's MIUI roms and keeping update and flashing all his new release rom. so couple day ago all of the sudden, i don' know what causes it and how it started it. my red button on far right. pressing it turn on and off the screen.so now when i press it to make the screen go back on from off mode. after i pressed the button the screen light turn on and the lock screen is there but when i touch the screen and try to move the ring(pyramid lockscreen) up to unlock, but the ring is not moving, it like there is no touch screen ability to my phone's screen.
but when i use the green button far left, the button usually to use phone. that button doesnt turn off the screen but it just turn on the screen, this button is working normally. i can move the ring up to enter the main screen.
the screen isnt cracked or any thing, but i do have a protection layer over it which been there since i got the phone and never got this problem before.
what do you guys think my problem is and how can i solve it?
thank you!

disable capacitive keys and enable on screen navigation keys sm-p585

Hi,
I was wondering if you could disable capacitive buttons and have on screen buttons (that don't cover the apps) on this device without root? I have heard the buttons get pressed accidentally.
Thanks
I want the same thing. because I always bumping the taskview button. I even rotated the display and use the tablet upside down ,so the buttons at the top. and I still bump it sometimes...

[URGENT] Touchscreen problem, pls help me :(

Hi! im facing a rly boring problem.
Touch screen just dont work, only on first boot works great, but if I lock and unlock my screen the touch just stop.
Touch buttons (capacitive buttons) work great. Also, I figured out something, If I press the power key and fastly move my finger around the screen 'till it turns on, it does detect my finger and works until i remove my finger from the screen, then it just stop.
I really neeed help

Categories

Resources