well my phone cpu is always around 40 - 50 at any clock ( 0.8 to 1.2 ) and this produces a heat around the screen ( the phone is blazing fast and smooth consumes a fair amount of battery ) i 've installed before many roms and this problems started when i first used root booster with 6.0.1 then it presisted with any rom i install even flashing official rom don't change the config
my questions is is those thermals normal ?
can somebody screeshot CPU covernor tunable from kernel auditor
and how can i reset my cpu original setting
wadhah1000 said:
well my phone cpu is always around 40 - 50 at any clock ( 0.8 to 1.2 ) and this produces a heat around the screen ( the phone is blazing fast and smooth consumes a fair amount of battery ) i 've installed before many roms and this problems started when i first used root booster with 6.0.1 then it presisted with any rom i install even flashing official rom don't change the config
my questions is is those thermals normal ?
can somebody screeshot CPU covernor tunable from kernel auditor
and how can i reset my cpu original setting
Click to expand...
Click to collapse
You have made similar threads/posts before CPU kernel and settings are reverted to original when you flash a stock rom. During summer, my cpu was between 40-50 and now it is cooler. It depends of what you do with your phone. For example, mobile data - GPS can cause heat to phone.
If you think that something is wrong with your phone, you can bring it to a service... although i dont trust anyone unless i see with my eyes what they do.
#Henkate said:
You have made similar threads/posts before CPU kernel and settings are reverted to original when you flash a stock rom. During summer, my cpu was between 40-50 and now it is cooler. It depends of what you do with your phone. For example, mobile data - GPS can cause heat to phone.
If you think that something is wrong with your phone, you can bring it to a service... although i dont trust anyone unless i see with my eyes what they do.
Click to expand...
Click to collapse
i am at minium use and the phone hits up flashed stock rom but the problem is always consistent
Related
i know this might b a stupid question and a question that has been asked alot... i did a search and couldnt find an answer but my question is what is the highest you overclocked your phone and it was stable? im currently running at 240 stable and im sure this will answer alot of questions for anybody who is new to overclocking thx in advanced
dont really think that that many people push it to the max
as both ram speed and sd ram interface being a much bigger bottleneck then cpu
so overclock is more likely to cost precious batt time then anything usefull
I've noticed that my MDA becomes unstable after 230 or so. I'm using an old 1.08 IPL/SPL rom if that has anything to do with it. I have Battery Status so I just use the CPU scaler and it works pretty well.
I'm running @ 232 and have been for months with no noticeable additional battery drain. Running a more-or-less stock WM5.
When i have some high quality video files or a bit more complex software that wizard can't handle at standard frequency (like quake), i run it @260MHZ without any problems. I went up to 273MHz a few times, and it worked fine with TCPMP, but i never used this setting for more than about 20 minutes. When i used different programs (not only the video player) and switched between them (read: normal pda use) i had a few system frezes @273MHz, so i don't consider it a safe setting
I use Battery Status to scale between 147 to 247 with boost set to 260. I have never once in 4 months had it lock up. I use a very stable rom though so that has to help. When using other less stable roms I was getting lock ups often.
Jeff
I didnt want to root my phone HTC WILDFIRE because I am a little noob at these things a I thought I would totally destroy my phone.
But I found out that it is not so hard to root it as I thought, so today I succesfully rooted my phone. Than I wanted to overclock my procesor from 528 Mhz to I think 768 by downloading new kernel etc... Everything went good. I succesfully installed(or what, I said I am a little noob) that new kernel and was happy that my Wildfire will be faster.
But now I can see that my phone is lagging more, sometimes it freezes what i couldnt see before when It had original kernel.
HOW IS IT POSSIBLE?
Pls help
Do you have SetCPU installed? Then turn it a bit down, till 690~710 Mhz
Maxing it totally out can make your phone unstable. Think about it like a car, when it has 100 hp's and you tune it to 150 hp's things might break.
From stock 528 to 768 isn't a walk in the park, it's +45%
Yes I have setCPU and when I set my procesor to about 710 Mhz it lags and freezes. When I set it to about 580 it is doing the same. The only one solution of this I think is to reinstal the kernel.
Now I have 2.6.32.21-HCDRJacob-ga91 e 73b- [email protected] 1.
That is the full name of it. And in setcpu info it shows me before the version ( 2.6.32.21-HCDRJacob-ga91 e 73b- [email protected] 1) Linux versio... Maybe thats the problem???
And I have to find some solution as fast as possible because sometimes when somebody calls me I cant answer because of a biiiig lag. And then I cant do anything.
Thx for help
What id the minimum speed set to? I wouldn't go below 160. And my max is 672mhz.
Are you running different profiles or just the main profile in setCPU? Mine used to lag when i had a few profiles running but i have removed them all and only using the main profile and the lag has now gone.
when i went to wildpuzzle i found whatever speed i set my processor through set cpu it froze about 4-5 times a day. after flashing the kernel to remove overclocking it has not frozen in a week. everything really responsive, checking auto detect speeds with set cpu shows max 528mhz min450mhz
I tried many options and at last its OK. firstly I had a big difference between max and min of my procesor at setCPU, so I tried to set it to min about 630 and max about 700.
Now it is OK I dont know how, but I am happy the ****y problem is somehow solved and everytjing now goes very smoothly, thx u all
ephbee said:
when i went to wildpuzzle i found whatever speed i set my processor through set cpu it froze about 4-5 times a day. after flashing the kernel to remove overclocking it has not frozen in a week. everything really responsive, checking auto detect speeds with set cpu shows max 528mhz min450mhz
Click to expand...
Click to collapse
So what kernel did you flash it to?
I have rooted abdroid 2.3.4 with cyanogen 7 and in the settings there is one that i can change the maximum value to cpu...Now is at 998....what value above that is the safest to choose with out the phone have any problem???
depends which rom it is
some can go up to 1.5 and some cant
Can also depend on the phone, I have 2 hd2s, one chuggs along nicely at 1075mhz, the other gives random slowdowns / hangs (4-5 a week,not lots but enough to be a pain) at any setting above 921mhz. Same rom,same installed apps, same data.
Well here are the Phone Info
Model
HTC HD2
Andorid
2.3.4
.......
15.42.50.11U_2.15.50.14
Kernel
2.6.32.15_tytung_r10-gbdfeaac
Mod Version
CyanogenMod 7-05252011-NIGHTLY DESIRE
GRJ22
Anyone?
Sent from my HTC HD2 using XDA App
The best thing to do is scale up gradually, try each step above 998. OC then try it for 24hours, then try a step up and try it for 24 hours and so on. Do not check set at boot though just in case you pick a speed that causes problems.
What can go wrong???How do i see that it cant support a number??We are talking about maximum price and not all the time...???Someone that tried and have it overclocked????
What can go wrong???
It coukd stop booting and require a hard reset/backup restore.
How do i see that it cant support a number??
It will start to give force closes, hang, reboot, feel sluggish..
We are talking about maximum price and not all the time...???Someone that tried and have it overclocked????
Do a cwm backup and just try it, worst case scenario is it doesn't boot and you have to restore.
ntisco said:
What can go wrong???How do i see that it cant support a number??We are talking about maximum price and not all the time...???Someone that tried and have it overclocked????
Click to expand...
Click to collapse
I would guess that the majority of users are overclocked. I, for example, am running my phone smoothly at 1.2 GHz without problems, but to be honest I scarcely notice the difference with overclocking. Dorimanx's kernel with 1.61 GHz overclock didn't really perform any better than Tytung r14 at 1.2 GHz.
Just do as the others said and try it out whilst making sure to uncheck 'set on boot', but I think any speed should really be fine.
I don't know what the general opinion is on this (some devs say it isn't a good app) but use setCPU in order to create profiles if you want, thus being able to reduce your standby battery drain and stuff like that
In the quandra the info of the phone whrites that the cpu is up to 1190mhz and know is at 998.Is this true?Can it go that much?
If so we can put it at 1113 that its safe?
I know that i ask again and again but i dont want the phone to lose or damage
Youre best bet would be to download setCPU and try different clock speeds . the thing about setCPU though is it has a stress test . So after you set a speed . you can run the stress test to test if its too high a value or if you are safe to run at that speed . just dont tick the box that says "apply at boot"
My phone (currently Dorimanx ROM) is stable at 1536MHz. On Cyanogen it was similar. On 1612 it had freezen for a few times while watching a flash video on youtube. Set it to 1,4GHz, and it should work fine. Phone will not damage, data too. Just as they written above, do not click apply at boot.
And make stress test for more than 10 mins, because I have done it for 10 mins, and as I written, it had freezed during YT watching.
The topest that it has is 1190..that is the last option !!!I put it at 1113 for one day know and i made a profile to go 573 when i close the screen.
Tomorow i try the next option antil 1190 ...and we will see
Tytung r10? Why not upgrade to another Kernel?
I think that's the core issue. Dorimanx kernels i.e. can be clocked solid to 1.2ghz
Oh, I've completly forgotten. I have used Dorimanx kernel with Cyanogen. But it doesn't let you reinstall rom from settings (Factory reset). You need to reinstall rom from zip or restore backup in CWM. On 1190 it will work stable for ever
Hi everyone,
Thanks for reading this . As specified above, my phone has a rather serious problem of overheating. To try and reslove the issue I tried modifying the CPU frequency, to set it low enough. And a very bizarre thing just happend.
Opening Kernel Adiutor, I saw that 4 out of my 8 cores (the 2.5 ones) were running normally. No overclock, stock settings, stock governor and so on. The issue seems to be in the other 4 (the 2.3 ones). Both the minimum and highest frequency allowed is set up to the same parameter (1556 mHz), forcing it to stay at maximum clock all the time. I tried modyfing via Kernel Adiutor the settings, lowering the minimum frequency allowed to stock one (which should be around 300 or something), but it had no effects: it immediatly comes back to 1556 and just won't come down.
All of this started happening after i removed Franco Kernel from my system, flashing another ROM (Chroma) with a different kernel altogether. I'm currently on Cataclysm ROM and after doing a clean install, formatting internal storage as well as every other partition, i couldn't resolve the issue. Moreover, Kernel Adiutor sometimes won't even show my CPU settings, stuck on an infinite loading. If anyone could help me, it would be much appreciated. It's really important. I'm by no means Android expert but i do have a rather basic understanding of ADB and so on.
Thanks a lot for your time.
-LVBNR5
I used to own a n7 and that allowed me to set min and max freq. with apps fine but i am also seeing this on my 6p, i don't notice any "overheating" although it may be due to me being used to it always running hot since i run a lot of heavier programs and also you know... SD810 but i guess it does the frequency thing as a way that frequency is actually controlled on this platform or something, because it sticks fine to the limits you set while flashing a kernel but no app can get it to stick. Then again this is just me sharing my experience with it as it is my first phone with this platform, so maybe someone who knows more about this could offer some help.
ml11ML said:
I used to own a n7 and that allowed me to set min and max freq. with apps fine but i am also seeing this on my 6p, i don't notice any "overheating" although it may be due to me being used to it always running hot since i run a lot of heavier programs and also you know... SD810 but i guess it does the frequency thing as a way that frequency is actually controlled on this platform or something, because it sticks fine to the limits you set while flashing a kernel but no app can get it to stick. Then again this is just me sharing my experience with it as it is my first phone with this platform, so maybe someone who knows more about this could offer some help.
Click to expand...
Click to collapse
Thanks anyway, i really appreciate it!
well my phone cpu is always around 40 - 50 at any clock ( 0.8 to 1.2 ) and this produces a heat around the screen ( the phone is blazing fast and smooth consumes a fair amount of battery ) i 've installed before many roms and this problems started when i first used root booster with 6.0.1 then it presisted with any rom i install even flashing official rom don't change the config
my questions is is those thermals normal ?
can somebody screeshot CPU covernor tunable from kernel auditor
and how can i reset my cpu original setting
help plz ;_;