well my phone cpu is always around 40 - 50 at any clock ( 0.8 to 1.2 ) and this produces a heat around the screen ( the phone is blazing fast and smooth consumes a fair amount of battery ) i 've installed before many roms and this problems started when i first used root booster with 6.0.1 then it presisted with any rom i install even flashing official rom don't change the config
my questions is is those thermals normal ?
can somebody screeshot CPU covernor tunable from kernel auditor
and how can i reset my cpu original setting
help plz ;_;
Related
I didnt want to root my phone HTC WILDFIRE because I am a little noob at these things a I thought I would totally destroy my phone.
But I found out that it is not so hard to root it as I thought, so today I succesfully rooted my phone. Than I wanted to overclock my procesor from 528 Mhz to I think 768 by downloading new kernel etc... Everything went good. I succesfully installed(or what, I said I am a little noob) that new kernel and was happy that my Wildfire will be faster.
But now I can see that my phone is lagging more, sometimes it freezes what i couldnt see before when It had original kernel.
HOW IS IT POSSIBLE?
Pls help
Do you have SetCPU installed? Then turn it a bit down, till 690~710 Mhz
Maxing it totally out can make your phone unstable. Think about it like a car, when it has 100 hp's and you tune it to 150 hp's things might break.
From stock 528 to 768 isn't a walk in the park, it's +45%
Yes I have setCPU and when I set my procesor to about 710 Mhz it lags and freezes. When I set it to about 580 it is doing the same. The only one solution of this I think is to reinstal the kernel.
Now I have 2.6.32.21-HCDRJacob-ga91 e 73b- [email protected] 1.
That is the full name of it. And in setcpu info it shows me before the version ( 2.6.32.21-HCDRJacob-ga91 e 73b- [email protected] 1) Linux versio... Maybe thats the problem???
And I have to find some solution as fast as possible because sometimes when somebody calls me I cant answer because of a biiiig lag. And then I cant do anything.
Thx for help
What id the minimum speed set to? I wouldn't go below 160. And my max is 672mhz.
Are you running different profiles or just the main profile in setCPU? Mine used to lag when i had a few profiles running but i have removed them all and only using the main profile and the lag has now gone.
when i went to wildpuzzle i found whatever speed i set my processor through set cpu it froze about 4-5 times a day. after flashing the kernel to remove overclocking it has not frozen in a week. everything really responsive, checking auto detect speeds with set cpu shows max 528mhz min450mhz
I tried many options and at last its OK. firstly I had a big difference between max and min of my procesor at setCPU, so I tried to set it to min about 630 and max about 700.
Now it is OK I dont know how, but I am happy the ****y problem is somehow solved and everytjing now goes very smoothly, thx u all
ephbee said:
when i went to wildpuzzle i found whatever speed i set my processor through set cpu it froze about 4-5 times a day. after flashing the kernel to remove overclocking it has not frozen in a week. everything really responsive, checking auto detect speeds with set cpu shows max 528mhz min450mhz
Click to expand...
Click to collapse
So what kernel did you flash it to?
Hi guys,
i tried CM7 but it was really laggy at my device, a lot of you guys said it is a very fast release !? so how can i get it working smooth ? when i wanted to get into the cpu settings i had a force close every time, jit was enabled..
do i have to get setcpu ? when yes where? which frequencies run smooth and stable ?
thanks in advance
eichl0r said:
Hi guys,
i tried CM7 but it was really laggy at my device, a lot of you guys said it is a very fast release !? so how can i get it working smooth ? when i wanted to get into the cpu settings i had a force close every time, jit was enabled..
do i have to get setcpu ? when yes where? which frequencies run smooth and stable ?
thanks in advance
Click to expand...
Click to collapse
Wipe EVERYTING, install CM7 then install HCDR.Kernal 4.1 (4.2 doesn't work as well) then use another overclock program, not setcpu, it doesn't work well with CM7. Hope that helps you!
* First, try flashing Kernel v4.1. CM7 comes with Kernel 4.2 by default, and, because it is clocked at 768 max, it leads to a lot of stability problems for everyone. Look for the HCDR.Kernel Topic in Wildfire Android Development Zone
* After that, you can install SetCPU. The SetCPU Dev has a thread here on XDA where he has posted the APK of SetCPU for download. Just enter SetCPU in the search bar and you should be able to find the thread with no issues. Here, you can set the max (Upto 710 recommended) and min (upto 245 recommended)
This should solve your lag and stability issues. If it still doesn;t, two more apps which can cause lag are (Note: This affects only a small %age of members with CM7)
* SetCPU (Alternative: OverclockWidget)
* ADW.Launcher (Alternative: Any other Launcher)
Oh, and CPU Settings FC's for everyone, from the time it was implemented. Looks like it is not ready yet.
Good Luck
hey 3xeno, thanks for your tipps!
with kernel 4.1 + setcpu + adw.launcher ex it finally works good!
the only thing thats a little strange is that i couldnt use my overclock setup from the openfire rom i had before, i have your suggested settings + screen of profile (352 max 245 min)+ tmep > 46° profile (352 max 245min), with openfire it was possible to have it at 691 mhz max and 245mhz min for normal mode, now i had to put it on 614 max 245min to not get the battery too warm, but anything else works great
eichl0r said:
hey 3xeno, thanks for your tipps!
with kernel 4.1 + setcpu + adw.launcher ex it finally works good!
the only thing thats a little strange is that i couldnt use my overclock setup from the openfire rom i had before, i have your suggested settings + screen of profile (352 max 245 min)+ tmep > 46° profile (352 max 245min), with openfire it was possible to have it at 691 mhz max and 245mhz min for normal mode, now i had to put it on 614 max 245min to not get the battery too warm, but anything else works great
Click to expand...
Click to collapse
That is rather weird, because, many are keeping it at 710 MHz Max and having no issues. What is your battery temperature when you keep it at 691? (And at idle. It is normal for the phone to get warm when you continuously run a heavy app like a game on it, also, I am sure you know this, but dont measure during charging, it does get pretty warm then )
hmm i played around with the phone a little and then put it in my pants pocket, after wa while when i put it back out it has restarted i guess and i was very warm at the back...hmm ill test it a little perhaps it was a one time thing
Hi guys!!
I am running Stock ROM on my GT-I9301, with @sev3n1985 kernel. I have overheating problems! Sometimes it's very hard to hold my phone. How can I solve it? Btw, I'll leave my Kernel Settings down bellow
Regards :*
Settings (I use Kernel Adiutor):
- CPU Max Freq: 1401Mhz
- CPU Min Freq: 300Mhz
- CPU Governor: smartmax
- Multicore Power Saving: Disabled
- CPU Hotplug: MSM Hotplug (MPDecision desactivates)
- CPU Boosted: 1
- Max Cores Screen Off: 1
- Thermal: Temperature Throttle
Sent from my S3 Neo+ (GT-I9301I) running Custom Made StockROM with @sev3n1985 kernel
Have you already done a factory reset?
Perhaps it's just a bad app.
Jhnsn said:
Have you already done a factory reset?
Perhaps it's just a bad app.
Click to expand...
Click to collapse
I use Greenify even on some system apps, so no background apps. And my ROM is deodexed. So I think that's not the problem. But thank you
Sent from my S3 Neo+ (GT-I9301I) running Custom Made StockROM with @sev3n1985 kernel
S3 Neo is familiar with overheating problems even on stock, but I'm trying to understand, do you have that problem even if you are not using your phone that much?
Sometimes hot plug & governors (more tied to the interactive than ondemand) logic simply bricks hot plug & then you have all cores running all the time. Their is also a conflict tied to additional bust frequency logic. All this is actually cased by Samsung & it's never been corrected in this kernel (it is corrected only in official CM12.1 repo). Simple reset resolve this until it happens again.
Regarding Smart max try like this:
Also go with mpdecision hot plug & use simple on demand GPU governor.
It should save some juice keep consumption under control & device cooler.
Zola III said:
Sometimes hot plug & governors (more tied to the interactive than ondemand) logic simply bricks hot plug & then you have all cores running all the time. Their is also a conflict tied to additional bust frequency logic. All this is actually cased by Samsung & it's never been corrected in this kernel (it is corrected only in official CM12.1 repo). Simple reset resolve this until it happens again.
Regarding Smart max try like this:
Also go with mpdecision hot plug & use simple on demand GPU governor.
It should save some juice keep consumption under control & device cooler.
Click to expand...
Click to collapse
Thanks for your time, dude
You can also try like this to keep it more in green line frequency range even more during the light tasks, performance for the light tasks is not stellar but it's more than good enough this way.
Note: Ideal awake frequency (targeted one) for this SoC should actually be 600MHz considering power voltage and DRAM frequency dependencies but on Samsung firmware this is not fast enough so it actually produces contra effects; jumps to higher frequencies more often along with waking up additional cores so 787 is advised minimum. On the other hand peple who love & use Smart max on other light wait roms such as CM's (without of heap load Samsung bull****s) can actually try with 600MHz. Still interactive governor is possible to be tuned better.
Best regards.
hello,
i noticed that the my system load average from the developer option (show cpu usage) is always around 12/18/28, i know that anything above 1 is bad. should i be concerned about this? ( running stock rom / kernel on i9500 )
well my phone cpu is always around 40 - 50 at any clock ( 0.8 to 1.2 ) and this produces a heat around the screen ( the phone is blazing fast and smooth consumes a fair amount of battery ) i 've installed before many roms and this problems started when i first used root booster with 6.0.1 then it presisted with any rom i install even flashing official rom don't change the config
my questions is is those thermals normal ?
can somebody screeshot CPU covernor tunable from kernel auditor
and how can i reset my cpu original setting
wadhah1000 said:
well my phone cpu is always around 40 - 50 at any clock ( 0.8 to 1.2 ) and this produces a heat around the screen ( the phone is blazing fast and smooth consumes a fair amount of battery ) i 've installed before many roms and this problems started when i first used root booster with 6.0.1 then it presisted with any rom i install even flashing official rom don't change the config
my questions is is those thermals normal ?
can somebody screeshot CPU covernor tunable from kernel auditor
and how can i reset my cpu original setting
Click to expand...
Click to collapse
You have made similar threads/posts before CPU kernel and settings are reverted to original when you flash a stock rom. During summer, my cpu was between 40-50 and now it is cooler. It depends of what you do with your phone. For example, mobile data - GPS can cause heat to phone.
If you think that something is wrong with your phone, you can bring it to a service... although i dont trust anyone unless i see with my eyes what they do.
#Henkate said:
You have made similar threads/posts before CPU kernel and settings are reverted to original when you flash a stock rom. During summer, my cpu was between 40-50 and now it is cooler. It depends of what you do with your phone. For example, mobile data - GPS can cause heat to phone.
If you think that something is wrong with your phone, you can bring it to a service... although i dont trust anyone unless i see with my eyes what they do.
Click to expand...
Click to collapse
i am at minium use and the phone hits up flashed stock rom but the problem is always consistent