Hi guys, i just received my new prime exclusive moto g 4th, once i turned on my devices an update appears so i installed it (OTA), i remember there was something in the name like MPJ24.139-64, once it finished updating i wanted to remove the ads following this tutorial MOTO G 4th Gen How to Remove the Amazon Lock Screen Ads and Bloat Ware . i did it all exactly as it is on the post. now my device can't start and i am not able to install the stock firmware cause all the stock rom versions available are actually lower that the installed on my phone and i think i can't downgrade because of the locked bootloader and it seems to be unlockable .
also it says on the recovery mode the next legancy: WE HAVE DETECTED AN ATTEMPT TO FLASH UNAUTHORIZED SW ON YOUR DEVICE. CONTACT CUSTOMER SERVICE FOR ASSISTANCE.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Already tried
stkpxl said:
Try the above firmware. Should be the current version for your phone.
Click to expand...
Click to collapse
thanks for your help, i have already tried with that one, i flashes completely then when i reboot the devices it starts into recovery mode and says WE HAVE DETECTED AN ATTEMPT TO FLASH UNAUTHORIZED SW ON YOUR DEVICE. CONTACT CUSTOMER SERVICE FOR ASSISTANCE.
I think flashing S/W posted on Motorola site should bring your phone back to life.
See the thread - http://forum.xda-developers.com/showpost.php?p=68502532&postcount=381 for the link to the same.
mobile-junky said:
I think flashing S/W posted on Motorola site should bring your phone back to life.
See the thread - http://forum.xda-developers.com/showpost.php?p=68502532&postcount=381 for the link to the same.
Click to expand...
Click to collapse
The moto G 4th X1625 image is not available.
Cclown98 said:
The moto G 4th X1625 image is not available.
Click to expand...
Click to collapse
I would still give it a try as there is nothing to loose.
Or contact Motorola customer care to see what they say.
mobile-junky said:
I would still give it a try as there is nothing to loose.
Or contact Motorola customer care to see what they say.
Click to expand...
Click to collapse
hello, i've already tried those files and im still getting the same problem
Cclown98 said:
hello, i've already tried those files and im still getting the same problem
Click to expand...
Click to collapse
Did you try the files posted by Motorola at their site or the ones posted on android file host ..
If not by Motorola then I would try the same again.
mobile-junky said:
Did you try the files posted by Motorola at their site or the ones posted on android file host ..
If not by Motorola then I would try the same again.
Click to expand...
Click to collapse
there are no files for the xt1625 on the motorola website
Cclown98 said:
there are no files for the xt1625 on the motorola website
Click to expand...
Click to collapse
Please read the thread in http://forum.xda-developers.com/moto-g4/how-to/update-9-1-16-t3453726
It looks like somehow the firmware for the Indian XT1624 was put on your device. As far as I know, no one has been able to install XT1625 firmware on their device after installing the firmware for the XT1624.
---------- Post added at 10:02 AM ---------- Previous post was at 09:46 AM ----------
granny smith said:
Please read the thread in http://forum.xda-developers.com/moto-g4/how-to/update-9-1-16-t3453726
It looks like somehow the firmware for the Indian XT1624 was put on your device. As far as I know, no one has been able to install XT1625 firmware on their device after installing the firmware for the XT1624.
Click to expand...
Click to collapse
After a little research, it does appear that an OTA was released for the AMZ XT1625. Sorry, I can't think of anything else that hasn't already been suggested.
It seems Moto has changed their site and updated the s/w it now shows XT1625.
I am currently downloading from motorola right now. I am also making a backup like normal. I will let you know if it works for the XT1625 as mine is retail US.
OK I downloaded and flashed it. While it came to the July 1 security update build still said -49. There was no Amazon ad crap and I got a system UI fc and retail something fc. Beyond that it was working just fine after about 5 mins.
the problem is that on mine phone the bootloader is unlockable
stkpxl said:
I'm assuming you've tried a factory reset from recovery?
Click to expand...
Click to collapse
yes i have
stkpxl said:
Have you tried unlocking the bootloader? I know you have an Amazon model but it doesn't hurt to try.
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a/session/L2F2LzEvdGltZS8xNDc1MjY0MDkwL3NpZC9mSENuX1hfbQ%3D%3D
Click to expand...
Click to collapse
yes i have tried and it says that my device is no eligible for bootloader unlocking
stkpxl said:
Mine is booting up now, so far the same results as you. Although, I couldn't relock the bootloader. Could you?
EDIT: Trying a factory reset to see if those FCs get fixed....
EDIT2: They don't get fixed with a factory reset. Restarting it FCs File Manager. Restarting a 3rd time, it's fine. Weird
---------- Post added at 11:16 AM ---------- Previous post was at 10:32 AM ----------
Looks like QuadRooter got fixed. Used the CheckPoint scanner to check. I'll take a security update even without updating the build number lol
Click to expand...
Click to collapse
I never tried to relock the bootloader. I still have a few more things to test before I will truly be happy lol.
stkpxl said:
Well it turns out you can't downgrade after flashing this. I tried flashing the previous firmware and got an error. I went ahead and nuked it all and put a build of CM13 on. Bonus for me is that I got received calls to work for once. So I'm fairly happy bow.
Click to expand...
Click to collapse
I restored my backup. I didn't try to downgrade. I will try that tomorrow.
I reflashed the moto firmware from moto website. Tried to downgrade and got an error myself. However I did have the factory -48 firmware. I don't remember where I got it from so sorry I cannot link it. I was able to flash twrp and wiped all data then flashed -48. I instantly received software update after I finished the normal setup. It updated to build number MPJ24.139-64. As soon as everything finishes reinstalling on my XT1625 I will post a screenshot.
Okay I found it again. Hope this will help out. Also this is only for Retail US. I do not think that it will work for AMZ
Firmware That I flashed. http://www.filefactory.com/file/3t2...PJ24.139-48_cid50_subsidy-DEFAULT_CFC.xml.zip
im in the same situation with a soft bricked, bootloder locked, amazon g4. and i would like to try to update with a zip file of the update if there is one to be found somewhere.
Related
? Great news,
The new firmware "Maintenance" update "21.11.56" is out today.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
? Check your phone for updates!!
maybe one day the xt1045 will be updated.
What about full firmware (about 500 MB)? Is it possible to get it somewhere? I can't find even 4.4.4 (previous update) of GB UK update, only EU.
Oh nice, thanks for the heads up. Nothing here on my XT1039 en.EU at the moment, but these things rolls out in waves.
Will hope.
Gesendet von meinem XT1039 mit Tapatalk
And......any new experiences? Will it fix the SD-Card problems generally??
All input will be welcome.....
Someone doesn`t know the meaning of "NDA".
anything-but said:
Someone doesn`t know the meaning of "NDA".
Click to expand...
Click to collapse
What ? Who is under NDA here ?
anything-but said:
Someone doesn`t know the meaning of "NDA".
Click to expand...
Click to collapse
Motorola is rolling this out to select users. There is no NDA involved.
Well,i`ll admit i`m in the trial (tho won`t comment on it) and one of the steps to getting it involved agreeing to a NDA. If it was just a "all agreeing" one or something specific to this update alone i`m not sure.
anything-but said:
Well,i`ll admit i`m in the trial (tho won`t comment on it) and one of the steps to getting it involved agreeing to a NDA. If it was just a "all agreeing" one or something specific to this update alone i`m not sure.
Click to expand...
Click to collapse
hmm mm, that is interesting...
Please tell us more?!
? No, I'm not taking part to any trial or anything like that.
You claiming to be in a trial!
Please can you elaborate a bit more?
And you agreed to some "NDA" ?!
? And now you are commenting about it in here!!!
Clearly:
anything-but said:
Someone doesn`t know the meaning of "NDA".
Click to expand...
Click to collapse
☺ here the Wikipedia link to help you:
http://en.m.wikipedia.org/wiki/Non-disclosure_agreement
Your comments are definitely interesting,
You are boasting about being part to some kind of a secret experiment, and you signed some NDA to take part on it...
?I think you have just broken your "NDA".
Kxb21.14-l1.56
I have not received an update KXB21.14-L1.56, where it can be downloaded?
Did anyone receive this update for en.uk firmware?
Just received this update for Moto G 4G - en.EU
Have just received this for the en.GB retgb version! (Sunday 21st September). Could this late delivery be related to using ART?
Installed no problem on the rooted device. After installing, all apps were updated. Took less than 10 minutes from start to finish.
Did you capture the ota file?
MarisPiper said:
Have just received this for the en.GB retgb version! (Sunday 21st September). Could this late delivery be related to using ART?
Click to expand...
Click to collapse
ART? There aren't any changes to ART in 4.4.4.
Don't know if anyone has posted the actual OTA for XT039 EU. But here it is.
Motorola Moto G XT1039 (EU)
Old Version: 21.1.46.en.EU
Information: 21.11.56.en.EU
Dam you smoke pot you beat me to it. Was just uploading the OTA update to mega and made a post Will now go and get that thread of mine closed.
Just updated myself will come back with any improvements BTW just to the gpt.bin and fsg.mbn being touch it makes the Stock firmware before it useless will there be a new version of the Full firmware for us that wish to return to stock.
Edit: This is a first the OTA didn't take out my root, although i did need to uninstall xposed before updating.
hacktrix2006 said:
Dam you smoke pot you beat me to it. Was just uploading the OTA update to mega and made a post Will now go and get that thread of mine closed.
Just updated myself will come back with any improvements BTW just to the gpt.bin and fsg.mbn being touch it makes the Stock firmware before it useless will there be a new version of the Full firmware for us that wish to return to stock.
Edit: This is a first the OTA didn't take out my root, although i did need to uninstall xposed before updating.
Click to expand...
Click to collapse
I'm a complete technical newbie, so I apologise for what might be stupid questions. I used to own a HTC Desire which had to be rooted to make it suit my requirements, and now I have a rooted Moto G LTE (4.4.4, 21.1.46 from Tesco) which I've had to root to suit most of my requirements.
I'd like to install this update to (maybe) fix the SD card issue. I have "CWM recovery" installed which seems to break the installation of this update. I get a 'install zip' question in the recovery, I swipe yes and then swipe to install root again. At this point the phone boots normally, and immediately after boot it reboots into the CWM recovery screen again (and over). I rebooted into CWM recovery and paniced when I realised that the SD Card isn't there with my backup and so I wiped the cache. This fixed the reboot problem, but I'd still like to update, but don't want to risk breaking my phone.
Can I use the zip 2 posts above me to update to the latest version? Will that be compatible with a Tesco version phone?
How do I create a backup that is located somewhere the phone can see in CWM recovery mode?
Apologies again if this is a silly question, stupid question or anything else. I'm not technically minded, but I'm forced into these corners to make my phone work how I'd like it to.
Thanks!
Just making a thread for leads on when the lolipop firmware comes out so that those of us that are bricked can finally use our phones.
I'm uploading it right now
Link to the new Verizon Software Upgrade Assistant: VerizonWirelessUpgradeAssistantUpdate_1.4.6.exe
Link to the FXZ: VRZ_XT1254_SU2-12_12_1FF.xml.zip
spikejnz said:
I'm uploading it right now
Link to the new Verizon Software Upgrade Assistant: VerizonWirelessUpgradeAssistantUpdate_1.4.6.exe
Link to the FXZ: VRZ_XT1254_SU2-12_12_1FF.xml.zip
Click to expand...
Click to collapse
i need the lolipop fXZ not the kk one
Michaelmansour1997 said:
i need the lolipop fXZ not the kk one
Click to expand...
Click to collapse
Yeaaaah, VZW Software Repair Assistant said it was the 5.1 update, but that's very clearly KK. :/
Where are the files that are loaded Verizon Software Upgrade Assistant?
I found on the MacBook Pro. But this is not Lolipop, is KK ...
currently my pc is downloading version 23.11.38.en.US im using verizon software repair assistant 1.46
Michaelmansour1997 said:
currently my pc is downloading version 23.11.38.en.US im using verizon software repair assistant 1.46
Click to expand...
Click to collapse
It loads not Lolipop, it loads K.K. ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ilia3367 said:
It loads not Lolipop, it loads K.K. ...
Click to expand...
Click to collapse
yep just found that out, I need my damn phone to work again
Michaelmansour1997 said:
yep just found that out, I need my damn phone to work again
Click to expand...
Click to collapse
it will work, we will get the full firmware, but not today
Jaocagomez said:
it will work, we will get the full firmware, but not today
Click to expand...
Click to collapse
when will we get it though, how long will it take?
Michaelmansour1997 said:
when will we get it though, how long will it take?
Click to expand...
Click to collapse
from 3 to 10 days its the normal time to get the full firmware released
Check the build prop of that 23.11.38.en.US . It could be lolipop since you already have lolipop on your phone. Or please upload it and I'll check.
siegesoldier said:
Check the build prop of that 23.11.38.en.US . It could be lolipop since you already have lolipop on your phone. Or please upload it and I'll check.
Click to expand...
Click to collapse
Look here http://forum.xda-developers.com/showpost.php?p=61650184&postcount=7 "Click to show content" and compare archive KK
ilia3367 said:
It loads not Lolipop, it loads K.K. ...
Click to expand...
Click to collapse
rip
God dammit.
I talked to two VZW reps. Neither was able to offer much support. The second actually said that Motorola would be able to help me get the image, and told me to call them.
Called Motorola, and the first rep told me to ask on the Motorola support forums for help. Yes, that's right., they wanted me to ask for the recovery image ON A USER-SUPPORTED FORUM. Genius. The second tech said that my only option was to go do a Factory Reset or go back to 4.4.4, neither of which is acceptable to me. "Well, you can contact Verizon for help."
So now I have a flagship device, bricked by the OTA, and nobody knows how to fix it. Screw you, VZW/Motorola. If you provide updates, you should have recovery firmware images available IMMEDIATELY!
spikejnz said:
God dammit.
I talked to two VZW reps. Neither was able to offer much support. The second actually said that Motorola would be able to help me get the image, and told me to call them.
Called Motorola, and the first rep told me to ask on the Motorola support forums for help. Yes, that's right., they wanted me to ask for the recovery image ON A USER-SUPPORTED FORUM. Genius. The second tech said that my only option was to go do a Factory Reset or go back to 4.4.4, neither of which is acceptable to me. "Well, you can contact Verizon for help."
So now I have a flagship device, bricked by the OTA, and nobody knows how to fix it. Screw you, VZW/Motorola. If you provide updates, you should have recovery firmware images available IMMEDIATELY!
Click to expand...
Click to collapse
you have to wait for the full firmware update coming the following days
Yeah, I just don't know that I can go 3-10 days without my phone. I'm not sure that I'm capable. I'm not willing to reset my device, though.
You know what? We have a few spare devices lying around here at work. Maybe I'll steal one for a few days
my phne is bricked as well after the ota. although I just did a factory reset a couple days ago so I'd be fine with resetting my device or going back to kitkat... but how would I go about doing that? Ive tried flashing the kitkat firmware and such but i cant seem to figure it out... any help would be appreciated while I wait for vzw to release the new images
spikejnz said:
I'm uploading it right now
Link to the new Verizon Software Upgrade Assistant: VerizonWirelessUpgradeAssistantUpdate_1.4.6.exe
Link to the FXZ: VRZ_XT1254_SU2-12_12_1FF.xml.zip
Click to expand...
Click to collapse
Anyone have a mirror of this updated upgrade assistant? there doesn't seem to be any place else to get it. I've looked. Looks like the official links were pulled.
siegesoldier said:
Anyone have a mirror of this updated upgrade assistant? there doesn't seem to be any place else to get it. I've looked. Looks like the official links were pulled.
Click to expand...
Click to collapse
I put it back up.
I did not believe until I received it and tried flashing absolutely all firmware out there for 1225/1254/1250 without bricking it. I then moved on to my next step in plan - install any retail version firmware but Verizon. I started the experiment with 4.4.4 first and found that 1225 radio will not work in 1254 (baseband simply cannot be recognised). Then I flashed 1254 radio on top (later with boot.img as well) and this make everything work except Wifi cannot be turned on. Although I don't expect it to work, I tried 1225 5.0.2 firmware with 1254 radio and as expected it does not work.
Honestly I was hoping the 1254 radio + 1225 firmware will work in 4.4.4, which means it should work when 5.1 comes out for 1225. I tried to find related information but there weren't much, maybe due to lack of BL unlocked 1254s out there. I once read someone write about radio.img must go with boot.img but I tried that. Just wondering if any of you experts here have advices for me. Well, I am assuming my phone will not be bricked so I am brave!
@Skrilax_CZ can help you.
http://forum.xda-developers.com/dro.../moto-maxx-xt1225-cm12-0-pre-release-t3060089
He can help you get CM12.1 working with the Verizon radio.
ikpchou said:
I did not believe until I received it and tried flashing absolutely all firmware out there for 1225/1254/1250 without bricking it. I then moved on to my next step in plan - install any retail version firmware but Verizon. I started the experiment with 4.4.4 first and found that 1225 radio will not work in 1254 (baseband simply cannot be recognised). Then I flashed 1254 radio on top (later with boot.img as well) and this make everything work except Wifi cannot be turned on. Although I don't expect it to work, I tried 1225 5.0.2 firmware with 1254 radio and as expected it does not work.
Honestly I was hoping the 1254 radio + 1225 firmware will work in 4.4.4, which means it should work when 5.1 comes out for 1225. I tried to find related information but there weren't much, maybe due to lack of BL unlocked 1254s out there. I once read someone write about radio.img must go with boot.img but I tried that. Just wondering if any of you experts here have advices for me. Well, I am assuming my phone will not be bricked so I am brave!
Click to expand...
Click to collapse
Whatever happens please report your findings back here! I'm curious how well the XT1225 CM12.1 works on your device.
BL unlock ../???
?
Sent from my XT1254 using Tapatalk
Would it be possible for you to upload a picture of your bootloader saying it is unlocked?
Sent from my XT1254 using XDA Forums
Murd0c said:
Would it be possible for you to upload a picture of your bootloader saying it is unlocked?
Sent from my XT1254 using XDA Forums
Click to expand...
Click to collapse
Yes that would be great.
PolishPoet said:
Yes that would be great.
Click to expand...
Click to collapse
I have just taken photos, but looks like I still cannot post until I post 10+ messages. Will write a bit more and do again.
PolishPoet said:
Yes that would be great.
Click to expand...
Click to collapse
ChazzMatt said:
@Skrilax_CZ can help you.
http://forum.xda-developers.com/dro.../moto-maxx-xt1225-cm12-0-pre-release-t3060089
He can help you get CM12.1 working with the Verizon radio.
Click to expand...
Click to collapse
Thanks and have already written to him. Again, I am too new to this forum so am still accumulating my initial 10 posts in order to post under proper topic...
aneeshmbabu said:
BL unlock ../???
Click to expand...
Click to collapse
trikotret said:
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
Murd0c said:
Would it be possible for you to upload a picture of your bootloader saying it is unlocked?
Sent from my XT1254 using XDA Forums
Click to expand...
Click to collapse
PolishPoet said:
Yes that would be great.
Click to expand...
Click to collapse
I know not too many would believe, until I can post the photos. Before I reach 10 posts, let me give a bit more information here - this unit was claimed to be unlocked by software, in 4.4.4 it shows UNLOCKED with status code 1, and in Lollipop it shows ENGINEERING. In both versions software version is MODIFIED instead of OFFICIAL. There are some discussion in China and it appears there are three ways to unlock - 1. engineering handset from factory, 2. officially unlocked, 3. software unlocked. The one I have is of the type 3, but as far as I can learnt from the internet, there is no major difference between type 2 and 3, if type 2 will ever exist...
mattlgroff said:
Whatever happens please report your findings back here! I'm curious how well the XT1225 CM12.1 works on your device.
Click to expand...
Click to collapse
Yes, I will certainly try it as soon as I received reply on the radio issue. At the moment I am still trying all I can to try to fix the Wifi cannot turn on problem in my 4.4.4 XT1254 radio + 4.4.4 XT1225 firmware combination. I honestly wouldn't mind using that for a while until I can use 5.1 XT1254 radio + 5.1 XT1225 firmware combination...
My objective is to get rid of Verizon firmware so the system is lighter and that I can have proper GSM call functions such as USSD, and tethering etc. I seem to remember that mixing firmware and radio can be done under the same Android version in the past with other Moto phones... Any suggestions or advices here would be highly appreciated.
Sorry for posting so much in a short time, I need to get to 10 posts and post the photos
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://photos.google.com/photo/AF1QipOBKBcquBHnpn02gN9xCxrXZyhojbRnkltBKWaf
https://photos.google.com/photo/AF1QipPDAZMVfUEEdWLHbVOrJHyuq5Wo06otxJ5xlU3u
unable to view photos said server not found
Yea. I can't see 'em either.
rriffle08 said:
unable to view photos said server not found
Click to expand...
Click to collapse
nijohnson said:
Yea. I can't see 'em either.
Click to expand...
Click to collapse
Oh, just figured out how to do it properly from Google Photo:
https://goo.gl/photos/5yakEUKRusT7sn136
Please see if this is ok now.
Woohooo
So your Turbo was purchased from China?
Tonight i receive new update on my moto x xt1058 AT&T carrier
The system version is 222.201.1
Build number LPAS23.12-21.7-1
I installed it some performance bugs was cleared and battery was also optimised as i assumed
Phone was now faster than before
Now another thing there is no root the developers have another challenge to patch this firmware also
Because AT&T have locked bootloader
Anyone who install this update
please share your experience also
Here is snaps
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Br
Shahzaib Jahangir
Shabby The Dev said:
Now another thing there is no root the developers have another challenge to patch this firmware also
Because AT&T have locked bootloader
Anyone who install this update
please share your experience also
Click to expand...
Click to collapse
I wonder if this root security patch affects those of us with unlocked bootloaders? (Probably not)
Also I hope the full image is released soon...
squaremoogle said:
I wonder if this root security patch affects those of us with unlocked bootloaders? (Probably not)
Also I hope the full image is released soon...
Click to expand...
Click to collapse
I got the same update notification and installed it. Motorola support has NO CLUE what this update is about. What is it?
I just got the notification too. I'm running a Chilean provider (Movistar) ROM, but the update just says 'en.CL'. I unlocked my bootloader a long time ago though via Motorola code IIRC, and to tell the truth I don't remember what precautions to take when receiving an OTA.
Moto X AT&T 2016-04-01 update ready
Not found any changelog for this update
Anyone found the changelog so please share it
Corsario_Negro said:
I just got the notification too. I'm running a Chilean provider (Movistar) ROM, but the update just says 'en.CL'. I unlocked my bootloader a long time ago though via Motorola code IIRC, and to tell the truth I don't remember what precautions to take when receiving an OTA.
Click to expand...
Click to collapse
My moto x xt1058 has also unlocked bootloader and i install this update without any issues
Shabby The Dev said:
Not found any changelog for this update
Anyone found the changelog so please share it
My moto x xt1058 has also unlocked bootloader and i install this update without any issues
Click to expand...
Click to collapse
Did you lose root after updating? Did you have to 'put bloatware back in' like the sticky says?
No my phone was not rooted
Anyway if bootloader was unlocked so you also can easily downgrade your moto x with 21.7 firmware
But be carefully
Backup your data first
I don't backup any data even contacts and update it [emoji2] and i m lucky
Br
Shahzaib Jahangir
Shabby The Dev said:
Not found any changelog for this update
Anyone found the changelog so please share it
My moto x xt1058 has also unlocked bootloader and i install this update without any issues
Click to expand...
Click to collapse
I don't follow... How is it that your bootloader is unlocked, but you are unable to root?
You can still flash a system app and root that way, correct?
I am updating from 222.26.7.ghost_att.ATT.en.US and the zip includes several system library updates and a new modem firmware.
I have an unlocked bootloader and a rooted phone, so to install:
* Boot to recovery (TWRP) and make a backup copy of update zip (/cache/Blur_Version.222.26.7.ghost_att.ATT.en.US.zip) at /sdcard (aka /data/media/0).
* Flash system and recovery to stock firmware in bootloader
* Install the update using stock recovery
* Reflash TWRP and reinstall SuperSU and Xposed
squaremoogle said:
Shabby The Dev said:
Corsario_Negro said:
Did you lose root after updating? Did you have to 'put bloatware back in' like the sticky says?
Click to expand...
Click to collapse
No my phone was not rooted
Click to expand...
Click to collapse
I don't follow... How is it that your bootloader is unlocked, but you are unable to root?
You can still flash a system app and root that way, correct?
Click to expand...
Click to collapse
Shabby means his phone was not rooted prior to applying the update, not he lost root or was unable to root.
I would happily take it if it means better battery life root is useless in its current state.
Just got the update notification on the XT1060.
I'm trying to learn how to root this thing, as I've never done so on an Android device. Should I hold off on updating this until after I've rooted?
My brother's wife got this update and now her phone is not connecting to their wifi network, even after several resets and different configurations.
Hopefully the old root methods will be adapted to this update.
Please chime in if you have a similar problem or a solution.
---------- Post added at 05:26 PM ---------- Previous post was at 05:21 PM ----------
MortimerR said:
Just got the update notification on the XT1060.
I'm trying to learn how to root this thing, as I've never done so on an Android device. Should I hold off on updating this until after I've rooted?
Click to expand...
Click to collapse
Definitely consider rooting/unlocking your bootloader as an alternative to official releases. You just have so many more options once you've made custom roms available to yourself.
Installed in on my dev edition and haven't noticed any difference.. Probably not a significant update.
cipsaz said:
Installed in on my dev edition and haven't noticed any difference.. Probably not a significant update.
Click to expand...
Click to collapse
Did you use this OTA on a rooted device? If so, did it impact your root?
bobo-the-drunk said:
Did you use this OTA on a rooted device? If so, did it impact your root?
Click to expand...
Click to collapse
The device is not rooted.
Does anybody have the stock zip for this update or know where they're usually located? I've been researching the method CrashXXL used to add root/Xposed/remove bloat, but then Moto dropped this update and I have to start from scratch.
lpjunior999 said:
Does anybody have the stock zip for this update or know where they're usually located? I've been researching the method CrashXXL used to add root/Xposed/remove bloat, but then Moto dropped this update and I have to start from scratch.
Click to expand...
Click to collapse
@iscaela posted the instructions to get update.zip file in the first page read but for this you need rooted phone
Don't Ever update your rooted moto X to the latest firmware via OTA specially verizon xt1060
My friend update a rooted xt1060 via OTA to the latest firmware and now his phone doesn't booted anymore Stuck on fastboot with an error of system failure
Now no firmware available right also fail to downgrade waiting for new update firmware
another thing this update have only SECURITY PATCH not any changing but i think patched the root privileges
Shabby The Dev said:
@iscaela posted the instructions to get update.zip file in the first page read but for this you need rooted phone
Click to expand...
Click to collapse
You also need an unlocked bootloader, which I don't have.
Guys i just recieved new update for my G4 international after 6 months ... So far its good and i notice that phone generates less heat .. It is v20g and July patch
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same for me
Has anyone tried installing over root and xposed?
I guess I'll try it and report back.
Update: Doesn't work with root.
http://i.imgur.com/prap3EG.png
Same here. Romanian version.
Sent from my LG-H815 using Tapatalk
English screenshot: http://i.imgur.com/boZhseN.png
I am still waiting...
For me nothig yet.
Supertras said:
I am still waiting...
Click to expand...
Click to collapse
You could have always got the official v20d marshmallow that was posted on XDA.
htr5 said:
You could have always got the official v20d marshmallow that was posted on XDA.
Click to expand...
Click to collapse
I know but I didn't had the time and the necessary resources to do it . I was also a Little afraid for the bootloop problem.
Supertras said:
I know but I didn't had the time and the necessary resources to do it . I was also a Little afraid for the bootloop problem.
Click to expand...
Click to collapse
Not sure if you know about it, but your phone is basically showpiece from showrooms or shops, that's the X in your version number. This kind of phones are not intended to be sold for customers.
You will never got more updates as you already have, so your only option is to flash it manually.
Bootloop problem is not dependant on software version. It doesn't matter if you have 5.1 or 6.0.
src151 said:
Not sure if you know about it, but your phone is basically showpiece from showrooms or shops, that's the X in your version number. This kind of phones are not intended to be sold for customers.
You will never got more updates as you already have, so your only option is to flash it manually.
Bootloop problem is not dependant on software version. It doesn't matter if you have 5.1 or 6.0.
Click to expand...
Click to collapse
Do you have an accurate source to backup your wild claims?
My EU (UK) H815 v20d-EUR-XX is currently downloading the update.
No need for a manual flash and my device certainly was not a store demo model.
Hello,
My G4 is unlocked and ROOTED and the update is available and in downloading atm.
There are something I should to know about the fact that my smartphone ROOTED evening before applying the update?
Could this affect my G4?
Thank you! =D
Supertras said:
I know but I didn't had the time and the necessary resources to do it . I was also a Little afraid for the bootloop problem.
Click to expand...
Click to collapse
OllieD said:
Do you have an accurate source to backup your wild claims?
My EU (UK) H815 v20d-EUR-XX is currently downloading the update.
No need for a manual flash and my device certainly was not a store demo model.
Click to expand...
Click to collapse
Sure,
We are not talking about the same thing.
Look again, and maybe twice at his version number: It's is VX10c-EUR-XX
I'm not talking about XX, but about the first "X"... see?
Sure, your device is the same as mine v20d-EUR-XX which is a retail model, but this is not the case for VX10C-EUR-XX which is unfortunately a demo model
Ok, finally, it seems that I can't update automatically with a G4 ROOTED.
When I launch the update this message pop "phone restarting"
Then boot directly on TWRP... (>_<)
So obviously I can't execute this update automatically... :'(
Sylar37 said:
Ok, finally, it seems that I can't update automatically with a G4 ROOTED.
When I launch the update this message pop "phone restarting"
Then boot directly on TWRP... (>_<)
So obviously I can't execute this update automatically... :'(
Click to expand...
Click to collapse
Off you can't. You have another recovery. Use LG UP and flash it. Easier can't be. Note you will lose root and the recovery.
Riardon said:
Off you can't. You have another recovery. Use LG UP and flash it. Easier can't be. Note you will lose root and the recovery.
Click to expand...
Click to collapse
OK but where can I drop the .kdz file?
I searched on http://devtester.ro/projects/lg-firmwares/country.php?country=France#
But even if the last update is was today I can't find the firmware h81520(x_00)... =/
Thank you for your help. =)
OllieD said:
Do you have an accurate source to backup your wild claims?
My EU (UK) H815 v20d-EUR-XX is currently downloading the update.
No need for a manual flash and my device certainly was not a store demo model.
Click to expand...
Click to collapse
Me too same model. I don't know what they're talking about. Store models can't even make calls and this deters people from trying to steal them.
---------- Post added at 03:41 PM ---------- Previous post was at 03:40 PM ----------
Sylar37 said:
Ok, finally, it seems that I can't update automatically with a G4 ROOTED.
When I launch the update this message pop "phone restarting"
Then boot directly on TWRP... (>_<)
So obviously I can't execute this update automatically... :'(
Click to expand...
Click to collapse
Same. Luckily, they seem to have deleted the update so you need to redownload. At least we don't have 500MB lurking somewhere.
Sylar37 said:
Ok, finally, it seems that I can't update automatically with a G4 ROOTED.
When I launch the update this message pop "phone restarting"
Then boot directly on TWRP... (>_<)
So obviously I can't execute this update automatically... :'(
Click to expand...
Click to collapse
Sylar37 said:
OK but where can I drop the .kdz file?
I searched on http://devtester.ro/projects/lg-firmwares/country.php?country=France#
But even if the last update is was today I can't find the firmware h81520(x_00)... =/
Thank you for your help. =)
Click to expand...
Click to collapse
Go to thread about the Portugal update and download the KDZ from there. Any link from that thread is the international H815 update. Don't worry about countries and shenanigans is the same firmware for all. V20g-EUR-XX. Install LG UP on your PC. First the DLL then the program. Place the KDZ in your LG UP install directory (Crogram Files (x86)/LG Electronics/LGUP/model/8994). Put your phone in download mode. (With phone turned off press Volume UP and with it press plug in the USB cable). Click refurbished option for a complete wipe and clean flash. Before all this make a backup. You can also select upgrade option to avoid wipe but I always recommend a clean flash. Read the according threads in XDA for further information if you need.
It seems the h818p will not be updated(yet)?
@src151 thanks for the info. I didn't knew that demo phones can have the GSM module. At least I got it at a very good price
I will upgrade manually then.