I did not believe until I received it and tried flashing absolutely all firmware out there for 1225/1254/1250 without bricking it. I then moved on to my next step in plan - install any retail version firmware but Verizon. I started the experiment with 4.4.4 first and found that 1225 radio will not work in 1254 (baseband simply cannot be recognised). Then I flashed 1254 radio on top (later with boot.img as well) and this make everything work except Wifi cannot be turned on. Although I don't expect it to work, I tried 1225 5.0.2 firmware with 1254 radio and as expected it does not work.
Honestly I was hoping the 1254 radio + 1225 firmware will work in 4.4.4, which means it should work when 5.1 comes out for 1225. I tried to find related information but there weren't much, maybe due to lack of BL unlocked 1254s out there. I once read someone write about radio.img must go with boot.img but I tried that. Just wondering if any of you experts here have advices for me. Well, I am assuming my phone will not be bricked so I am brave!
@Skrilax_CZ can help you.
http://forum.xda-developers.com/dro.../moto-maxx-xt1225-cm12-0-pre-release-t3060089
He can help you get CM12.1 working with the Verizon radio.
ikpchou said:
I did not believe until I received it and tried flashing absolutely all firmware out there for 1225/1254/1250 without bricking it. I then moved on to my next step in plan - install any retail version firmware but Verizon. I started the experiment with 4.4.4 first and found that 1225 radio will not work in 1254 (baseband simply cannot be recognised). Then I flashed 1254 radio on top (later with boot.img as well) and this make everything work except Wifi cannot be turned on. Although I don't expect it to work, I tried 1225 5.0.2 firmware with 1254 radio and as expected it does not work.
Honestly I was hoping the 1254 radio + 1225 firmware will work in 4.4.4, which means it should work when 5.1 comes out for 1225. I tried to find related information but there weren't much, maybe due to lack of BL unlocked 1254s out there. I once read someone write about radio.img must go with boot.img but I tried that. Just wondering if any of you experts here have advices for me. Well, I am assuming my phone will not be bricked so I am brave!
Click to expand...
Click to collapse
Whatever happens please report your findings back here! I'm curious how well the XT1225 CM12.1 works on your device.
BL unlock ../???
?
Sent from my XT1254 using Tapatalk
Would it be possible for you to upload a picture of your bootloader saying it is unlocked?
Sent from my XT1254 using XDA Forums
Murd0c said:
Would it be possible for you to upload a picture of your bootloader saying it is unlocked?
Sent from my XT1254 using XDA Forums
Click to expand...
Click to collapse
Yes that would be great.
PolishPoet said:
Yes that would be great.
Click to expand...
Click to collapse
I have just taken photos, but looks like I still cannot post until I post 10+ messages. Will write a bit more and do again.
PolishPoet said:
Yes that would be great.
Click to expand...
Click to collapse
ChazzMatt said:
@Skrilax_CZ can help you.
http://forum.xda-developers.com/dro.../moto-maxx-xt1225-cm12-0-pre-release-t3060089
He can help you get CM12.1 working with the Verizon radio.
Click to expand...
Click to collapse
Thanks and have already written to him. Again, I am too new to this forum so am still accumulating my initial 10 posts in order to post under proper topic...
aneeshmbabu said:
BL unlock ../???
Click to expand...
Click to collapse
trikotret said:
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
Murd0c said:
Would it be possible for you to upload a picture of your bootloader saying it is unlocked?
Sent from my XT1254 using XDA Forums
Click to expand...
Click to collapse
PolishPoet said:
Yes that would be great.
Click to expand...
Click to collapse
I know not too many would believe, until I can post the photos. Before I reach 10 posts, let me give a bit more information here - this unit was claimed to be unlocked by software, in 4.4.4 it shows UNLOCKED with status code 1, and in Lollipop it shows ENGINEERING. In both versions software version is MODIFIED instead of OFFICIAL. There are some discussion in China and it appears there are three ways to unlock - 1. engineering handset from factory, 2. officially unlocked, 3. software unlocked. The one I have is of the type 3, but as far as I can learnt from the internet, there is no major difference between type 2 and 3, if type 2 will ever exist...
mattlgroff said:
Whatever happens please report your findings back here! I'm curious how well the XT1225 CM12.1 works on your device.
Click to expand...
Click to collapse
Yes, I will certainly try it as soon as I received reply on the radio issue. At the moment I am still trying all I can to try to fix the Wifi cannot turn on problem in my 4.4.4 XT1254 radio + 4.4.4 XT1225 firmware combination. I honestly wouldn't mind using that for a while until I can use 5.1 XT1254 radio + 5.1 XT1225 firmware combination...
My objective is to get rid of Verizon firmware so the system is lighter and that I can have proper GSM call functions such as USSD, and tethering etc. I seem to remember that mixing firmware and radio can be done under the same Android version in the past with other Moto phones... Any suggestions or advices here would be highly appreciated.
Sorry for posting so much in a short time, I need to get to 10 posts and post the photos
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://photos.google.com/photo/AF1QipOBKBcquBHnpn02gN9xCxrXZyhojbRnkltBKWaf
https://photos.google.com/photo/AF1QipPDAZMVfUEEdWLHbVOrJHyuq5Wo06otxJ5xlU3u
unable to view photos said server not found
Yea. I can't see 'em either.
rriffle08 said:
unable to view photos said server not found
Click to expand...
Click to collapse
nijohnson said:
Yea. I can't see 'em either.
Click to expand...
Click to collapse
Oh, just figured out how to do it properly from Google Photo:
https://goo.gl/photos/5yakEUKRusT7sn136
Please see if this is ok now.
Woohooo
So your Turbo was purchased from China?
Related
Just posting my experience of getting a fresh Moto G 16GB that was Tesco purchased - unlocked and to Stock.
I linked to the XDA thread by t-bon3 - which is a great guide.
Here is how it went for me.
First issue that the device is locked to tesco sim cards.
Note: you are not unlocking the bootloader or adding root to the system.
The phone will be exactly as if you bought it from retail, just you got it subsided by Tesco.
I choose these guys to get an unlock code - they seemed professional - I avoid ebay & paypal.
http://www.unlockunit.com/unlock-motorola-moto-g?var=tel
Form filling.......
Phone Model : *Moto G*
Country & Network : *United Kingdom - Tesco Mobile*
IMEI: *XXXXXXXXXXXXXXX*
E-mail: *YourEmail*
I then got 3 Emails.
1: Confirm Order
2: Confirm Payment
3: Unlock code (came 11 minutes after I paid)
There were 2 unlock codes - I put a non-tesco SIM in and was greeted with the prompt - the first code worked.
Then after that I followed this guide to Install the UK Retail firmware
http://forum.xda-developers.com/showthread.php?p=47820707
Files From here
http://sbf.droid-developers.org/phone.php?device=14
I used this one
Android 4.3
Blur_Version.14.71.8.falcon_umts.Retail.en.GB
*Retail UK*
407.3 MiB
40FD34F930D9ADD3AB3F65B5A23FCD00
Simple task, enable USB debugging, reboot into fastboot, run script, reboot.
Now just to wait for the Over The Air 4.4.2 update that is due any day for the UK phones.
http://motorola-blog.blogspot.co.uk/2013/12/the-download-moto-g-gets-android-442.html
$13 dollars, Lol i paid £2.04 for my code got in within in 15minutes
fma965 said:
$13 dollars, Lol i paid £2.04 for my code got in within in 15minutes
Click to expand...
Click to collapse
I am extremely happy for you, why not post where you got it from, so others can benefit.
It's tricky to trust some sites, ebay is a minefield.
sorry my bad forgot to post the link here you go,
http://www.hotukdeals.com/deals/unl...ay-smgreen1969-99-9-positive-feedback-1723545
and the ebay link
http://www.ebay.co.uk/itm/111223239973
please note if it says he is away its due to the backlog and he will be avaliable within a few hours again, additionaly there is another guy who is trustworthy here
http://www.ebay.co.uk/itm/221326995328
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UK Kitkat is coming January according to Cnet btw
King p1n said:
UK Kitkat is coming January according to Cnet btw
Click to expand...
Click to collapse
It was supposed to be January for USA too, but they pushed it early - CNet may not be 100% up-to-date on this.
Edit: The article http://crave.cnet.co.uk/mobiles/motorola-moto-g-android-4-4-2-kitkat-update-begins-50013071/ does say they contacted moto
ARTICLE; said:
I've contacted Motorola to find out if the update is coming to the UK. Update: British phone fans will enjoy KitKat on the Moto G in January.
Click to expand...
Click to collapse
StevenHarperUK said:
It was supposed to be January for USA too, but they pushed it early - CNet may not be 100% up-to-date on this.
Click to expand...
Click to collapse
They edited their article I assume they got the info direct from Motorola
Sorry, but bit of an epic fail all round here. Payed far too much for the unlock and this flash to stock guide is far quicker and easier...
http://www.modaco.com/topic/366786-how-to-flash-to-the-standard-uk-rom/
b1g1an said:
Sorry, but bit of an epic fail all round here. Payed far too much for the unlock and this flash to stock guide is far quicker and easier...
http://www.modaco.com/topic/366786-how-to-flash-to-the-standard-uk-rom/
Click to expand...
Click to collapse
I agree I paid too much.. no going back now.
However I disagree that using a Pseudo Stock Rom is superior to flashing an actual stock ROM
I've repacked the UK ROM with the necessary tools to convert a branded device (e.g. Tesco) to a generic device.
Click to expand...
Click to collapse
Yes I understand it may be very close to the stock ROM, but it still isn't.
StevenHarperUK said:
I choose these guys to get an unlock code - they seemed professional - I avoid ebay & paypal.
http://www.unlockunit.com/unlock-motorola-moto-g?var=tel
Click to expand...
Click to collapse
HOW MUCH!!
Lollingtons!!
StevenHarperUK said:
Yes I understand it may be very close to the stock ROM, but it still isn't.
Click to expand...
Click to collapse
Wrong.
It is a full stock UK ROM. It wouldn't install if it wasn't.
In this case, repacked means adding the proper Moto fastboot tool, and a .bat file to automate the commands.
Appreciate the post, Tesco phone now on stock and unlocked via ebay..... cheers all.
Rusty! said:
Wrong.
It is a full stock UK ROM. It wouldn't install if it wasn't.
In this case, repacked means adding the proper Moto fastboot tool, and a .bat file to automate the commands.
Click to expand...
Click to collapse
Exactly, just does the long winded way from one simple command.
Actually, there is one error in the simple way, if you can call it that, he doesn't say you need to enable usb debugging before you start which might be confusing for noobs.
You don't need to enable it.
Put phone in fastboot, run .bat
Do you guys know if I can flash the US retail rom on my Canadian Koodo Moto g with the bootloader locked?
Try it and see, worst case scenario is it falls to install.
Rusty! said:
Try it and see, worst case scenario is it falls to install.
Click to expand...
Click to collapse
But then would I have to unlock the bootloader?
Not necessarily
My stock rom is not available yet so I would have to unlock the bootloader if it doesn't work. I want to keep my warranty. I will wait it out if I have to.
how to get my old XT1033
hi, i am from india i tried to get standard uk rom on y moto g from the following site
it is successfull and it is showing as XT1032 but now i had many problems so i want to get my mobile to XT1033 how i can do that
please help me if possible please upload sceen shots urgent!!
Thanks to FXZ @stras1234
@SamuriHL
Download VZN firm: http://download723.mediafire.com/edndo4lwgaag/p8oa8es2gsqqbh8/VZW_XT1060_4.4.4-KXA21.12-L1.26_1FF.xml.zip
Mirror: https://mega.co.nz/#!hA4GCQKR!OKnuaL0rdLuuLgNMBvrEqs91LLh1dFJgABxXnasr4pM
Download Mexico Radio: https://drive.google.com/file/d/0B46JMGLZaiK-ZjZQUGRDbHo5TzQ/edit?usp=sharing
1. uncompress VZN Firm
2. Replace NON-HLOS.bin in the VZN firm with the File in Mexico Radio (NON-HLOS.bin from second download).
3.- open RSD-Lite
4. select the .xml file
5. plug your phone in fastboot mode
6. just click start and voila
Note: if youre having radio or app issues i suggest al full wipe.
ROOT:
Just Flash the recent TWRP and use the SuperSU pack
Works with NEXTEL, Iusacell, Telcel, Movistar ... Mexico (dont Know if other Carriers).
If youre having issues just send me a HangOut Message: dashiell.cano
MOD EDIT: Read users warnings in the thread before flashing anything. As with anything on XDA, Use At Your Own Risk
How it works?, I've heard that with this update the Moto X's battery gets drained too fast
Just a note that the link to the FXZ is not a permanent one. Once it's posted on the sbf site, I'll be taking down my link for it. Keep an eye out here:
http://sbf.droid-developers.org/
SamuriHL said:
Just a note that the link to the FXZ is not a permanent one. Once it's posted on the sbf site, I'll be taking down my link for it. Keep an eye out here:
http://sbf.droid-developers.org/
Click to expand...
Click to collapse
TNX, im uploading the FXZ to mega to keep a mirror.
mcardielo said:
How it works?, I've heard that with this update the Moto X's battery gets drained too fast
Click to expand...
Click to collapse
Really dont know yet, the its my first day with the Firm, let me test it.
dashiell.cano said:
Really dont know yet, the its my first day with the Firm, let me test it.
Click to expand...
Click to collapse
Yhea please check the battery life and the cam quality please, i have one from telcel
Marco Lomas said:
Yhea please check the battery life and the cam quality please, i have one from telcel
Click to expand...
Click to collapse
The Battery with FB, mail and Twitter working in backgroung is 30% with 12 hours 57 mins and 17seconds battery.
The camera works with a better quality, is smooth and faster.
So, if it woks on mexico just replacing the radio files,,, i think it will work on brazil just doing the same,,, replace the radio files, right?!?!
My moto is xt1058.
thanks
martt said:
So, if it woks on mexico just replacing the radio files,,, i think it will work on brazil just doing the same,,, replace the radio files, right?!?!
My moto is xt1058.
thanks
Click to expand...
Click to collapse
Mmm yeah, why not???
I have two moto x and ive flashed eu, us, br, Fr, Asia, etc.
dashiell.cano said:
The Battery with FB, mail and Twitter working in backgroung is 30% with 12 hours 57 mins and 17seconds battery.
The camera works with a better quality, is smooth and faster.
Click to expand...
Click to collapse
With what screen time? Please?
what language comming with that rom??
maybe Brazilian portuguese?
thanks
martt said:
what language comming with that rom??
maybe Brazilian portuguese?
thanks
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Failed to hab check for boot: 0x56
preflash validation failed for boot
Any idea???
My bootloader is locked, must be unlocked???!!
thanks
martt said:
Failed to hab check for boot: 0x56
preflash validation failed for boot
Any idea???
My bootloader is locked, must be unlocked???!!
thanks
Click to expand...
Click to collapse
Yes, your bootloader needs to be unlocked.
dashiell.cano said:
Yes, your bootloader needs to be unlocked.
Click to expand...
Click to collapse
Thanks, i did the unlock and got my phone back!!!
:good::good:
do i need stock recovery for this to work .my rsd wont detect device
works on my XT1055
I can install it and keep my data? Or must do factory reset?....also if i make factory, the internal memory dont wipe isnt?
Marco Lomas said:
I can install it and keep my data? Or must do factory reset?....also if i make factory, the internal memory dont wipe isnt?
Click to expand...
Click to collapse
I did a dirty update but some things turn crazy, so i decided to make a clean install... And yeah u keep your internal memory.
raidrom said:
do i need stock recovery for this to work .my rsd wont detect device
Click to expand...
Click to collapse
Mmm nop ive used twrp
Only for Mexican users of Blur_Version.22.21.17.victara_retmx.retmx.en.MX
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://mega.co.nz/#!7VR0GR4Z!e3p2rphRaVSzFreoAAPsCmk-UIu3PJ5qH2l7dN4oDjM
My English isn't that good, MP o spanish
:highfive:
Thanks for share this OTA.
it's possible to use with a Claro (Chile) MotoX2014?
Hello,
I have an XT1097 directly from Motorola, (not telcel), but it's converted to XT1095
Is it possible to install this OTA to bring it back to it's real estate? (I don't have any backup of the original firmware)
xSober said:
Thanks for share this OTA.
it's possible to use with a Claro (Chile) MotoX2014?
Click to expand...
Click to collapse
No, it will fail. You have to wait for the OTA. But I doubt claro will get it, claro and motorola had a fight, and now claro does not sell motorola phones... which means claro's motorola phones might not get updates ever.
Sent from my XT1095 using Tapatalk
---------- Post added at 11:38 AM ---------- Previous post was at 11:34 AM ----------
bunglemx said:
Hello,
I have an XT1097 directly from Motorola, (not telcel), but it's converted to XT1095
Is it possible to install this OTA to bring it back to it's real estate? (I don't have any backup of the original firmware)
Click to expand...
Click to collapse
No, flashing this OTA will not revert your phone back to stock 1097. You need to download the full firmware for 1097 and flash it to get back to stock.
Sent from my XT1095 using Tapatalk
I don't think this is the official release because the kernel is one month older than the other "official" OTA's. Looks more like the soak before the final release.
No, flashing this OTA will not revert your phone back to stock 1097. You need to download the full firmware for 1097 and flash it to get back to stock.
Click to expand...
Click to collapse
Do you know where can I get it?
And do I flash it just like the xt1095 one of your guide?
:good:
bunglemx said:
Do you know where can I get it?
And do I flash it just like the xt1095 one of your guide?
:good:
Click to expand...
Click to collapse
I don't know which 1097(countrt/carrier) you have, so that depends. This link has many firmwares for the moto x: http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=25
Sent from my XT1095 using Tapatalk
AGISCI said:
I don't know which 1097(countrt/carrier) you have, so that depends. This link has many firmwares for the moto x: http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=25
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
México, and I bought it directly to Motorola, so no carrier.
Does it work for 22.21.25.victara_retla.retla.en.01?
Thanks!
bunglemx said:
México, and I bought it directly to Motorola, so no carrier.
Click to expand...
Click to collapse
Yes, the firmware for mexico is in that link. Here it is:
[http://www.filefactory.com/file/66bsfufslbt1/RETMX_XT1097_5.0_LXE22.46-17_cid12_CFC.xml.zip
The instructions should be similar to what is posted in other topics. But if you want to be on the safe side use RSDLite to flash it.
Sent from my XT1095 using Tapatalk
AGISCI said:
Yes, the firmware for mexico is in that link. Here it is:
[http://www.filefactory.com/file/66bsfufslbt1/RETMX_XT1097_5.0_LXE22.46-17_cid12_CFC.xml.zip
The instructions should be similar to what is posted in other topics. But if you want to be on the safe side use RSDLite to flash it.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Thanks, i'll download for a future flash :good:
I got the same update yesterday but It doesn't let me update it says there is an error when trying to update.
I tried from stock recovery and it says there is an error with gmail2.apk anyone know why is this happening?
A similar error happened to me yesterday, but with "Books.apk". I flashed again the stock rom with RDSLite and then I flashed the OTA (the zip file from the 1st post) and everything is working great now.
Can I use it? 4.4.4 telcel.
ccarrionc said:
Can I use it? 4.4.4 telcel.
Click to expand...
Click to collapse
No, you have to be on 5.0 retail mexico to use this ota file.
Sent from my XT1095 using Tapatalk
how i can chage the andorid 5.0 to 5.1?
Hi friends , i´m from mexico, i have a motox xt1097 with the carrier telcel, a few moths ago i can change the kit kat 4.4.4 to android 5.0 with the rds motorola and the system upgrade to 22.21.17.victara_retmx.retmx.en.MX amxmx, i want the 5.1 to my moto x, can you help me?
Thanks.
alexloyola said:
Hi friends , i´m from mexico, i have a motox xt1097 with the carrier telcel, a few moths ago i can change the kit kat 4.4.4 to android 5.0 with the rds motorola and the system upgrade to 22.21.17.victara_retmx.retmx.en.MX amxmx, i want the 5.1 to my moto x, can you help me?
Thanks.
Click to expand...
Click to collapse
If you're already on the stock 5.0 firmware (22.21.17.victara_retmx.retmx.en.MX), then you just need to flash the OTA via recovery.
If you don't know how to enter the recovery, just search for instructions, they're pretty easy to find, even videos.
Nek0x90 said:
A similar error happened to me yesterday, but with "Books.apk". I flashed again the stock rom with RDSLite and then I flashed the OTA (the zip file from the 1st post) and everything is working great now.
Click to expand...
Click to collapse
Can you link me to the post with that RDSLite or help me with some instructions to do it please?
work on amxmx telcel
zarocks said:
work on amxmx telcel
Click to expand...
Click to collapse
As I said, this is not the final/stable version. Look the date of the kernel, is 2 months old and the "official" versions out there are not more than one month old. Good it worked for you
Just making a thread for leads on when the lolipop firmware comes out so that those of us that are bricked can finally use our phones.
I'm uploading it right now
Link to the new Verizon Software Upgrade Assistant: VerizonWirelessUpgradeAssistantUpdate_1.4.6.exe
Link to the FXZ: VRZ_XT1254_SU2-12_12_1FF.xml.zip
spikejnz said:
I'm uploading it right now
Link to the new Verizon Software Upgrade Assistant: VerizonWirelessUpgradeAssistantUpdate_1.4.6.exe
Link to the FXZ: VRZ_XT1254_SU2-12_12_1FF.xml.zip
Click to expand...
Click to collapse
i need the lolipop fXZ not the kk one
Michaelmansour1997 said:
i need the lolipop fXZ not the kk one
Click to expand...
Click to collapse
Yeaaaah, VZW Software Repair Assistant said it was the 5.1 update, but that's very clearly KK. :/
Where are the files that are loaded Verizon Software Upgrade Assistant?
I found on the MacBook Pro. But this is not Lolipop, is KK ...
currently my pc is downloading version 23.11.38.en.US im using verizon software repair assistant 1.46
Michaelmansour1997 said:
currently my pc is downloading version 23.11.38.en.US im using verizon software repair assistant 1.46
Click to expand...
Click to collapse
It loads not Lolipop, it loads K.K. ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ilia3367 said:
It loads not Lolipop, it loads K.K. ...
Click to expand...
Click to collapse
yep just found that out, I need my damn phone to work again
Michaelmansour1997 said:
yep just found that out, I need my damn phone to work again
Click to expand...
Click to collapse
it will work, we will get the full firmware, but not today
Jaocagomez said:
it will work, we will get the full firmware, but not today
Click to expand...
Click to collapse
when will we get it though, how long will it take?
Michaelmansour1997 said:
when will we get it though, how long will it take?
Click to expand...
Click to collapse
from 3 to 10 days its the normal time to get the full firmware released
Check the build prop of that 23.11.38.en.US . It could be lolipop since you already have lolipop on your phone. Or please upload it and I'll check.
siegesoldier said:
Check the build prop of that 23.11.38.en.US . It could be lolipop since you already have lolipop on your phone. Or please upload it and I'll check.
Click to expand...
Click to collapse
Look here http://forum.xda-developers.com/showpost.php?p=61650184&postcount=7 "Click to show content" and compare archive KK
ilia3367 said:
It loads not Lolipop, it loads K.K. ...
Click to expand...
Click to collapse
rip
God dammit.
I talked to two VZW reps. Neither was able to offer much support. The second actually said that Motorola would be able to help me get the image, and told me to call them.
Called Motorola, and the first rep told me to ask on the Motorola support forums for help. Yes, that's right., they wanted me to ask for the recovery image ON A USER-SUPPORTED FORUM. Genius. The second tech said that my only option was to go do a Factory Reset or go back to 4.4.4, neither of which is acceptable to me. "Well, you can contact Verizon for help."
So now I have a flagship device, bricked by the OTA, and nobody knows how to fix it. Screw you, VZW/Motorola. If you provide updates, you should have recovery firmware images available IMMEDIATELY!
spikejnz said:
God dammit.
I talked to two VZW reps. Neither was able to offer much support. The second actually said that Motorola would be able to help me get the image, and told me to call them.
Called Motorola, and the first rep told me to ask on the Motorola support forums for help. Yes, that's right., they wanted me to ask for the recovery image ON A USER-SUPPORTED FORUM. Genius. The second tech said that my only option was to go do a Factory Reset or go back to 4.4.4, neither of which is acceptable to me. "Well, you can contact Verizon for help."
So now I have a flagship device, bricked by the OTA, and nobody knows how to fix it. Screw you, VZW/Motorola. If you provide updates, you should have recovery firmware images available IMMEDIATELY!
Click to expand...
Click to collapse
you have to wait for the full firmware update coming the following days
Yeah, I just don't know that I can go 3-10 days without my phone. I'm not sure that I'm capable. I'm not willing to reset my device, though.
You know what? We have a few spare devices lying around here at work. Maybe I'll steal one for a few days
my phne is bricked as well after the ota. although I just did a factory reset a couple days ago so I'd be fine with resetting my device or going back to kitkat... but how would I go about doing that? Ive tried flashing the kitkat firmware and such but i cant seem to figure it out... any help would be appreciated while I wait for vzw to release the new images
spikejnz said:
I'm uploading it right now
Link to the new Verizon Software Upgrade Assistant: VerizonWirelessUpgradeAssistantUpdate_1.4.6.exe
Link to the FXZ: VRZ_XT1254_SU2-12_12_1FF.xml.zip
Click to expand...
Click to collapse
Anyone have a mirror of this updated upgrade assistant? there doesn't seem to be any place else to get it. I've looked. Looks like the official links were pulled.
siegesoldier said:
Anyone have a mirror of this updated upgrade assistant? there doesn't seem to be any place else to get it. I've looked. Looks like the official links were pulled.
Click to expand...
Click to collapse
I put it back up.
jcase said:
New in 3.1.15
Moto X 2014 support (needs root via MoFo or KingRoot)
Better HTC m9 5.1.x support
MoFo:
http://forum.xda-developers.com/general/paid-software/mofo-root-turbo-t3064404
KingRoot (APK version, top download)
http://www.kingroot.net/down
Neither of these root methods were developed by us, but both worked during testing.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2792487
Go show your appreciation to those guys and unlock your bootloader.
I am very exciteeeee!
I downloaded an I am trying to give Sunshine my money, but before I can do that I need a stock 5.1 img with root and without xposed. Where can I find such a jewel?
Edit: Found this IMG hoping it will work, I'll keep you posted.
That IMG does not work FYI, it got closer though.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GatorsUF said:
That IMG does not work FYI, it got closer though.
Click to expand...
Click to collapse
Can you submit a support ticket, http://therootninja.zendesk.com and ill help figure this out
So to be clear, it's 45 bucks total (Mofo+Sunshine) and if you're on 5.1 you're SOL?
tekhna said:
So to be clear, it's 45 bucks total (Mofo+Sunshine) and if you're on 5.1 you're SOL?
Click to expand...
Click to collapse
The testing I did was done using KingRoot for temproot. Your mileage may very, but for the time being you need "some" form of root or temproot. If you have root via MoFo, that is fine too.
tekhna said:
So to be clear, it's 45 bucks total (Mofo+Sunshine) and if you're on 5.1 you're SOL?
Click to expand...
Click to collapse
That's what it sounds like. Unless a temproot is created which wouldn't surprise me with the recent stagefright exploit. Just be patient! ?
Sent from my XT1254 using Tapatalk
cadenmiller60 said:
That's what it sounds like. Unless a temproot is created which wouldn't surprise me with the recent stagefright exploit. Just be patient! ?
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
Ugh the main reason I upgraded to 5.1 was due to the memory leak. Hopefully I can use this in the future.
Sent from my Moto X
beaups said:
The testing I did was done using KingRoot for temproot. Your mileage may very, but for the time being you need "some" form of root or temproot. If you have root via MoFo, that is fine too.
Click to expand...
Click to collapse
MoFo doesn't work on 5.1 though, correct? So does KingRoot work on 5.1 then? Or did you use KingRoot on 5.0?
Will this do the trick?
http://forum.xda-developers.com/moto-x-2014/general/tool-xt10965-0lxe22-46-11-auto-flasher-t3139190
tekhna said:
MoFo doesn't work on 5.1 though, correct? So does KingRoot work on 5.1 then? Or did you use KingRoot on 5.0?
Click to expand...
Click to collapse
KingRoot doesn't work on 5.1.
Sent from my Moto X
Mac of York said:
KingRoot doesn't work on 5.1.
Sent from my Moto X
Click to expand...
Click to collapse
Ah well. So no viable unlock for 5.1 at this point.
@jcase
Would it help to get a rooted system from a XT1095?
cadenmiller60 said:
That's what it sounds like. Unless a temproot is created which wouldn't surprise me with the recent stagefright exploit. Just be patient! ?
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
mediaserver runs as the media user, i dont think in our case it will bring us much if any closer to root. The IBM vuln may.
Red_81 said:
@jcase
Would it help to get a rooted system from a XT1095?
Click to expand...
Click to collapse
we are good thanks
I didn't know if the users need a rooted system image pulled to flash. I'm rooted with no other mods to system
Mac of York said:
KingRoot doesn't work on 5.1.
Sent from my Moto X
Click to expand...
Click to collapse
There are posts of it working for other devices. It will fail a couple of times and then just work. Also cases where the phone won't boot anymore. More of the latter now.
Not attempting and I suggest others dont either. Risk outweighs rewards with this being my main phone.
Visi0nofExcellence2 said:
There are posts of it working for other devices. It will fail a couple of times and then just work. Also cases where the phone won't boot anymore. More of the latter now.
Not attempting and I suggest others dont. Risk outweighs rewards with this being my main phone.
Click to expand...
Click to collapse
Kingroot shouldnt cause the phone to stop booting, odd. Thanks for makign the thread btw
jcase said:
Kingroot shouldnt cause the phone to stop booting, odd. Thanks for makign the thread btw
Click to expand...
Click to collapse
Not bootng is horribly ambiguous wording on my part.
chicodelta said:
My shield is running 5.1..1. I tried kingroot 4.5, since others have reported success and now my tablet won't boot past the nvidia screen. Anyone else encountered this issue?
Click to expand...
Click to collapse
http://forum.xda-developers.com/shield-tablet/general/root-kingroot-t3112722/page4
jcase said:
mediaserver runs as the media user, i dont think in our case it will bring us much if any closer to root. The IBM vuln may.
we are good thanks
Click to expand...
Click to collapse
Ok. Has the droid turbo been tested yet or no? Thanks.
Sent from my XT1254 using Tapatalk
SunShine 3.1.16 is out, better support for MotoX 2014, including custom roms
GatorsUF said:
That IMG does not work FYI, it got closer though.
Click to expand...
Click to collapse