Related
I decided to flash back to stock in odin, it gets about 90% through the flash and fails and now when i turn my phone on it tells me to recovery my note 4 via Kies. Anyone help (N910F)
it says after the flash,
volume size is to big 81920 < 47104
odin : invaild ext4 image
ant78 said:
volume size is to big 81920 < 47104
odin : invaild ext4 image
Click to expand...
Click to collapse
Try firmware initialization under tools in Kies. You will probably get a pop up saying your phone is not compatible just close that out and hit tools, firmware initialization, then follow the instructions Kies gives you.
CodeNameRedNeck said:
Try firmware initialization under tools in Kies. You will probably get a pop up saying your phone is not compatible just close that out and hit tools, firmware initialization, then follow the instructions Kies gives you.
Click to expand...
Click to collapse
OK thanks, did as you suggested , kies downloads and decompresses the firmware but then kies just sticks o 0% and does nothing?
ant78 said:
OK thanks, did as you suggested , kies downloads and decompresses the firmware but then kies just sticks o 0% and does nothing?
Click to expand...
Click to collapse
I get a message saying the device cant connect to my pc.
beginning to wish i wouldnt of bothered rooting and installing a rom now :crying:
ant78 said:
OK thanks, did as you suggested , kies downloads and decompresses the firmware but then kies just sticks o 0% and does nothing?
Click to expand...
Click to collapse
Well that stinks. Maybe another firmware for the F version or maybe as I have heard others say they need a new pit file but that is dangerous stuff there and shouldn't be messed with unless really necessary and I don't know where you could find one. Good luck.
I'm not sure, but i think you're on a newer bootloader and you flash back to an older firmware
so far as i know you can't downgrade!
Try searching newer stock firmware and try again!
Regards
Sonic76
sonic76 said:
I'm not sure, but i think you're on a newer bootloader and you flash back to an older firmware
so far as i know you can't downgrade!
Try searching newer stock firmware and try again!
Regards
Sonic76
Click to expand...
Click to collapse
I think you might be right, i flashed the newer bootloader and modem with the XNOTE rom, Where do i find the newer stock firmware?
You can look @ sammobile or ask google!...from where (location) is your old Firmware?
Regards
Sonic76
sonic76 said:
You can look @ sammobile or ask google!...from where (location) is your old Firmware?
Regards
Sonic76
Click to expand...
Click to collapse
i tried samobile, its the version i all ready tried :crying:
ant78 said:
i tried samobile, its the version i all ready tried :crying:
Click to expand...
Click to collapse
My firmware is BTU (UK)
ant78 said:
My firmware is BTU (UK)
Click to expand...
Click to collapse
Check your P.M! ....or flash other newer stock Firmware.
...maybe there's no newer UK Firmware at the moment
Sonic76
Hello!
My device stopped to work and I tried Odin to upload new image, It didn't help. I want try to make repartition of sd-disk. Do anybody know where I can take this file?
Fermiy said:
Hello!
My device stopped to work and I tried Odin to upload new image, It didn't help. I want try to make repartition of sd-disk. Do anybody know where I can take this file?
Click to expand...
Click to collapse
Hello did you ever find that PIT file I also need it. Thanks
droidboy29 said:
Hello did you ever find that PIT file I also need it. Thanks
Click to expand...
Click to collapse
Hi!
No, I didn't... Sorry. It seems that nobody has it.
Hi, i found a .pit file for the SM-T230 variant. Im not sure if it will work with your T230NU tab, but you can give it a try.
Hi guys . I want to remember you how easy to get pit-file http://forum.xda-developers.com/tab-4/general/guide-how-to-pit-file-qualcomm-device-t2932088 .
_Cristian_ said:
Hi, i found a .pit file for the SM-T230 variant. Im not sure if it will work with your T230NU tab, but you can give it a try.
Click to expand...
Click to collapse
You've revived my SM-T230 mate. Thanks a llot
Too51oll said:
You've revived my SM-T230 mate. Thanks a llot
Click to expand...
Click to collapse
:good:
I Need Help ANYONE
I have a Samsung Galaxy Tab 4 (SM-T330NU) and its in need of a pit file, at least from what I think . the tablet wont boot to an os at all i have tried flashing stock with odin and nothing works wont boot recovery, but i can boot to download mode. i flash a custom recovery and after trying to get it to boot to it, it said can't mount /data or /system or anything i have no clue what to do from here anyone that can help would be very helpful please.:crying::crying::crying:
Hi,
This thread is pretty old but if anyone is still looking for the SM-T330NU pit file I found it (MILLETWIFI_EUR_OPEN.pit) and posted it here:
SM-T330NU Pit File Needed
I downloaded a SM-J500FN firmware for lollipop and I get a winrar file.I tried to extract it and while extracting i show me "Arhive corrupted" it finished extracting but is it good now , Can I Downgrade to Lollipop whit that ? Pls help!
Download it again just to be sure
Ragazzza said:
Download it again just to be sure
Click to expand...
Click to collapse
I did , I downloaded other version too.. It apears again..
Download firmware from trusted sources like sammobile.
They should just give you .tar files which can be flashed via Odin
[email protected]@!3Z said:
Download firmware from trusted sources like sammobile.
They should just give you .tar files which can be flashed via Odin
Click to expand...
Click to collapse
Idk why but Sammobile isnt working for me , When I click on firmware I want I cant download it I mean the Download button is grey and I cant click on it..
Rnder said:
Idk why but Sammobile isnt working for me , When I click on firmware I want I cant download it I mean the Download button is grey and I cant click on it..
Click to expand...
Click to collapse
Try http://fw.updato.com/
[email protected]@!3Z said:
Try http://fw.updato.com/
Click to expand...
Click to collapse
I downloaded it from that site. I get winrar file, While extracting "arhive corrupted" comes , but it extracts at the end.
Rnder said:
I downloaded it from that site. I get winrar file, While extracting "arhive corrupted" comes , but it extracts at the end.
Click to expand...
Click to collapse
Try to download other firmware. Maybe it was uploaded corrupted.
#Henkate said:
Try to download other firmware. Maybe it was uploaded corrupted.
Click to expand...
Click to collapse
I did . I downloaded 2 versions of it , Same problem on both
Rnder said:
I did . I downloaded 2 versions of it , Same problem on both
Click to expand...
Click to collapse
Try SamFirm program and see if there's any problem. I used updato once and didn't have any problems and I've used the program like 5-6 times before, without any problems neither.
You can also try to flash the file it extract. If it is really corrupted, the Odin flash should fail.
#Henkate said:
Try SamFirm program and see if there's any problem. I used updato once and didn't have any problems and I've used the program like 5-6 times before, without any problems neither.
You can also try to flash the file it extract. If it is really corrupted, the Odin flash should fail.
Click to expand...
Click to collapse
I`ll now try SamFirm and see hat am I on about
#Henkate said:
Try SamFirm program and see if there's any problem. I used updato once and didn't have any problems and I've used the program like 5-6 times before, without any problems neither.
You can also try to flash the file it extract. If it is really corrupted, the Odin flash should fail.
Click to expand...
Click to collapse
The region thing what do I type there ? ( in SamFirm program) ( I am looking for Lollipop)
Rnder said:
The region thing what do I type there ? ( in SamFirm program) ( I am looking for Lollipop)
Click to expand...
Click to collapse
On sammobile / updato, you see the regions there, like SEB, DBT, ROM etc.
This is what you must type in SamFirm.
#Henkate said:
On sammobile / updato, you see the regions there, like SEB, DBT, ROM etc.
This is what you must type in SamFirm.
Click to expand...
Click to collapse
And how I know is it 5.1.1 ?
Rnder said:
And how I know is it 5.1.1 ?
Click to expand...
Click to collapse
You'll see the android version once you check for firmware.
You can also fill the PDA and the others with the ones from a firmware 5.1.1 which you want.
Maybe this video will help you: https://m.youtube.com/watch?v=27CndpB1EI0 .
#Henkate said:
You'll see the android version once you check for firmware.
You can also fill the PDA and the others with the ones from a firmware 5.1.1 which you want.
Maybe this video will help you: https://m.youtube.com/watch?v=27CndpB1EI0 .
Click to expand...
Click to collapse
Ok I`ll try.
#Henkate said:
You'll see the android version once you check for firmware.
You can also fill the PDA and the others with the ones from a firmware 5.1.1 which you want.
Maybe this video will help you: https://m.youtube.com/watch?v=27CndpB1EI0 .
Click to expand...
Click to collapse
I typed all what it says on 5.1.1 firmware and the program showes me a 6.0.1 version.. ( Tried with all ones)
Please help me with A510FD recording mod to flash it to my rooted A510FD..
.
boss-619 said:
Please help me with A510FD recording mod to flash it to my rooted A510FD...
Click to expand...
Click to collapse
Open "/system/csc/others.xml" and add this line
Code:
<CscFeature_VoiceCall_ConfigRecording>RecordingAllowed</CscFeature_VoiceCall_ConfigRecording>
tys0n said:
Open "/system/csc/others.xml" and add this line
Code:
<CscFeature_VoiceCall_ConfigRecording>RecordingAllowed</CscFeature_VoiceCall_ConfigRecording>
Click to expand...
Click to collapse
Thank you man, working perfectly!!!
boss-619 said:
Thank you man, working perfectly!!!
Click to expand...
Click to collapse
Then hit the thanks button Good you got it working.
tys0n said:
Open "/system/csc/others.xml" and add this line
Code:
<CscFeature_VoiceCall_ConfigRecording>RecordingAllowed</CscFeature_VoiceCall_ConfigRecording>
Click to expand...
Click to collapse
sorry to post in this thread,but i want to ask(if you know) if in A320 2017,i can t locate CSC in system
is something changed in system structure or it is a different named file to modify?
broky said:
sorry to post in this thread,but i want to ask(if you know) if in A320 2017,i can t locate CSC in system
is something changed in system structure or it is a different named file to modify?
Click to expand...
Click to collapse
Hi. I think that some of the csc files have different names for the A-series 2017 but I'm pretty sure there should still be a csc folder in /system.
Are you on stock rom or is it custom tw rom?
Sent from my SM-A310F using Tapatalk
tys0n said:
Hi. I think that some of the csc files have different names for the A-series 2017 but I'm pretty sure there should still be a csc folder in /system.
Are you on stock rom or is it custom tw rom?
Sent from my SM-A310F using Tapatalk
Click to expand...
Click to collapse
hi m8!i m on stock 7.0.
i can t find this folder,might be other path,maybe something is changed..
thanks for helping
broky said:
hi m8!i m on stock 7.0.
i can t find this folder,might be other path,maybe something is changed..
thanks for helping
Click to expand...
Click to collapse
I actually had a A320 nougat firmware, csc SER here so I extracted cache.img to take a look at the csc files. Structure and names are same as A310 and it should be extracted to system when it's flashed in Odin.
What csc do you have?
What does it say if you dial *#1234# ?
Sent from my SM-A310F using Tapatalk
tys0n said:
I actually had a A320 nougat firmware, csc SER here so I extracted cache.img to take a look at the csc files. Structure and names are same as A310 and it should be extracted to system when it's flashed in Odin.
What csc do you have?
What does it say if you dial *#1234# ?
Sent from my SM-A310F using Tapatalk
Click to expand...
Click to collapse
if i dial *#1234# ,unknown code.
in phone info app states XEO for original CSC ,and active CSC code is blank.
broky said:
if i dial *#1234# ,unknown code.
in phone info app states XEO for original CSC ,and active CSC code is blank.
Click to expand...
Click to collapse
Ok I figured it probably wouldn't work since the keystrings for dialer is a part of the csc files.
Did you update to N with OTA or odin flash?
It's A320FL? Did you flash the SER update?
If you did, reflash AP and CSC parts with odin.
You could also try to tar only the cache.img and flash it but it needs the stock recovery to work, which is included in the AP part.
Third alternative is to ectract the csc and convert it to a flashable zip for twrp if you got the knowledge on how to do it.
tys0n said:
Ok I figured it probably wouldn't work since the keystrings for dialer is a part of the csc files.
Did you update to N with OTA or odin flash?
It's A320FL? Did you flash the SER update?
If you did, reflash AP and CSC parts with odin.
You could also try to tar only the cache.img and flash it but it needs the stock recovery to work, which is included in the AP part.
Third alternative is to ectract the csc and convert it to a flashable zip for twrp if you got the knowledge on how to do it.
Click to expand...
Click to collapse
yes it is an A320FL and i flashed the SER update with odin.
if i reflash AP and CSC parts with odin will loose my data?
broky said:
yes it is an A320FL and i flashed the SER update with odin.
if i reflash AP and CSC parts with odin will loose my data?
Click to expand...
Click to collapse
Your data should be fine.
4-file firmwares usually makes factory reset if it's marked something with "user_low_ship" but this firmware is marked "HOME" which means that the factory reset command should not be included in the csc part.
If you want to be safe you can make a backup of personal data, just in case.
Sent from my SM-A310F using Tapatalk
tys0n said:
Ok I figured it probably wouldn't work since the keystrings for dialer is a part of the csc files.
Did you update to N with OTA or odin flash?
It's A320FL? Did you flash the SER update?
If you did, reflash AP and CSC parts with odin.
You could also try to tar only the cache.img and flash it but it needs the stock recovery to work, which is included in the AP part.
Third alternative is to ectract the csc and convert it to a flashable zip for twrp if you got the knowledge on how to do it.
Click to expand...
Click to collapse
there are two CSC files,CSC and HOME CSC,should i flash the first?
sorry for no pressing thanks ,i m limited to 8 per day ,i ll take proper care later m8:good:
broky said:
there are two CSC files,CSC and HOME CSC,should i flash the first?
sorry for no pressing thanks ,i m limited to 8 per day ,i ll take proper care later m8:good:
Click to expand...
Click to collapse
Haha no problem with the thanks
Oh sorry, I didn't realise there was two different csc packages, both containing the "user_low_ship".
Looking inside the files, I'd say go with the "HOME_CSC_OXY_A320FOXY2BQG5_CL11883096_QB14314807_REV00_user_low_ship.tar.md5"
It doesn't contain the pit (partition information table) file that is used to re-format.
View attachment 4231311
tys0n said:
Haha no problem with the thanks
Oh sorry, I didn't realise there was two different csc packages, both containing the "user_low_ship".
Looking inside the files, I'd say go with the "HOME_CSC_OXY_A320FOXY2BQG5_CL11883096_QB14314807_REV00_user_low_ship.tar.md5"
It doesn't contain the pit (partition information table) file that is used to re-format.
View attachment 4231311
Click to expand...
Click to collapse
all good now ,i have CSC folder now but i face a new problem:
when i lock or unlock screen the phone plays a hiss/distortion loud sound for a second
EDIT:even keyboard plays that sound every time i press it..
any idea what could it be?
broky said:
all good now ,i have CSC folder now but i face a new problem:
when i lock or unlock screen the phone plays a hiss/distortion loud sound for a second
EDIT:even keyboard plays that sound every time i press it..
any idea what could it be?
Click to expand...
Click to collapse
Sorry I heve no idea. Have you checked the sound settings for screenlock, touch sound etc?
But still...doesn't sound like everythings is right if it's a distorded sound :/
tys0n said:
Sorry I heve no idea. Have you checked the sound settings for screenlock, touch sound etc?
But still...doesn't sound like everythings is right if it's a distorded sound :/
Click to expand...
Click to collapse
i ll take advantage of your knowledge and i will perform a full reset trying to solve it.
do i have to flash which files in odin(zip contains 5 files and odin only 4 slots)?
1/AP_A320FLXXS1AQE2_CL10926218_QB13666819_REV00_user_low_ship.tar.md5
2/BL_A320FLXXS1AQE2_CL10926218_QB13666819_REV00_user_low_ship.tar
3/CP_A320FLXXU1AQD1_CL492330_QB6218911_SIGNED.tar
4/CSC_XEO_A320FLXEO1AQE1_CL11174967_QB13608194_REV00_user_low_ship.tar
5/HOME_CSC_XEO_A320FLXEO1AQE1_CL11174967_QB13608194_REV00_user_low_ship.tar
the real doubt is which CSC between 4 and 5
broky said:
i ll take advantage of your knowledge and i will perform a full reset trying to solve it.
do i have to flash which files in odin(zip contains 5 files and odin only 4 slots)?
1/AP_A320FLXXS1AQE2_CL10926218_QB13666819_REV00_user_low_ship.tar.md5
2/BL_A320FLXXS1AQE2_CL10926218_QB13666819_REV00_user_low_ship.tar
3/CP_A320FLXXU1AQD1_CL492330_QB6218911_SIGNED.tar
4/CSC_XEO_A320FLXEO1AQE1_CL11174967_QB13608194_REV00_user_low_ship.tar
5/HOME_CSC_XEO_A320FLXEO1AQE1_CL11174967_QB13608194_REV00_user_low_ship.tar
the real doubt is which CSC between 4 and 5
Click to expand...
Click to collapse
I'm not sure since I dont own the A320 myself. Is the bootloader and modem interchangable between A320F/FL?
Do they have the same pit-file?
Sorry, but I can't give you a straight answer.
About the two csc-files:
HOME_CSC_XEO_A320FLXEO1AQE1_CL11174967_QB13608194_REV00_user_low_ship.tar <--Should be safe to flash. No pit file, no factory reset.
CSC_XEO_A320FLXEO1AQE1_CL11174967_QB13608194_REV00_user_low_ship.tar <-- Contains pit-file and should make reset.
Other then that, they should have exactly the same. content.
tys0n said:
Haha no problem with the thanks
Oh sorry, I didn't realise there was two different csc packages, both containing the "user_low_ship".
Looking inside the files, I'd say go with the "HOME_CSC_OXY_A320FOXY2BQG5_CL11883096_QB14314807_REV00_user_low_ship.tar.md5"
It doesn't contain the pit (partition information table) file that is used to re-format.
View attachment 4231311
Click to expand...
Click to collapse
Thank you again,you are a great help.
BTW the mysterious noise stopped today by itself without factory reset luckily for me.
broky said:
Thank you again,you are a great help.
BTW the mysterious noise stopped today by itself without factory reset luckily for me.
Click to expand...
Click to collapse
Just as strange as the glitch was there in the first place, but good that it disapered by itself
You're welcome, and thanks for your kind words.
Hello guys, I have just now heard that At&T is rolling out the Android Pie update to the S8 Active. Unfortunately, I do not have a AT&T SIM card on my device currently. This causes my phone to not get ANY updates. The only update I last got was when I sent my phone to a Samsung Technician after I bricked my phone from failed root attempts. I am currently in Android 8.0.0. Is there any way to flash any Pie firmware to my phone even though it is Bootloader v3? Any help is GREATLY appreciated as I am getting so tired of Oreo. I tried using Smart Switch but it says my phone is in the latest firmware update which is a lie, my security patch level is July 2018...
Edit: I have recently unlocked my phone from AT&T in hopes of getting an update, but I didn't know the firmware would stay. And no, I do not have ANY access to AT&T SIM cards or stores.
Edit 2: Solved! I just used a firmware download I got from this forum because sammobile.com did not have it here it is: https://drive.google.com/file/d/1bw-cYNY1KoEH4Pa-a9dJRQJW09r_uw93/view Just flash this firmware to your phone from Odin! This does not risk breaking or voiding your warranty if you still have one! I am enjoying Pie right now! Give thanks to the who supplied me with the firmware link and youdoofus who actually responded to me. I just wanted to be assured that the firmware that is Pie will be good for my device. This is for people who do not have ATT SIM on their phone or cannot receive update. Model number must be from ATT and SM-G892A!
05Anjelly said:
Hello guys, I have just now heard that At&T is rolling out the Android Pie update to the S8 Active. Unfortunately, I do not have a AT&T SIM card on my device currently. This causes my phone to not get ANY updates. The only update I last got was when I sent my phone to a Samsung Technician after I bricked my phone from failed root attempts. I am currently in Android 8.0.0. Is there any way to flash any Pie firmware to my phone even though it is Bootloader v3? Any help is GREATLY appreciated as I am getting so tired of Oreo. I tried using Smart Switch but it says my phone is in the latest firmware update which is a lie, my security patch level is July 2018...
Edit: I have recently unlocked my phone from AT&T in hopes of getting an update, but I didn't know the firmware would stay. And no, I do not have ANY access to AT&T SIM cards or stores.
Click to expand...
Click to collapse
the problem youre going to run into is the availability of firmwares for your phone. sammobile.com/firmwares was a bust, looking elsewhere for ya. But if you have a computer, usb type-c cable Odin and the correct firmware version and are able to get to download mode, then you should be in good shape.
So I have a firmware at hand with my phone model that is pie, if I update it through Odin, will it void my warranty? Or will there be any chance it will brick my phone because I have done this many times. If it wasn't for ATT bootloader v3 I would've not been asking all these questions. I have already used sammobile.
05Anjelly said:
So I have a firmware at hand with my phone model that is pie, if I update it through Odin, will it void my warranty? Or will there be any chance it will brick my phone because I have done this many times. If it wasn't for ATT bootloader v3 I would've not been asking all these questions. I have already used sammobile.
Click to expand...
Click to collapse
it will not void your warranty. isnt your warranty expired on an S8 anyways? only rooting/unlocking bootloader will void the warranty.
youdoofus said:
it will not void your warranty. isnt your warranty expired on an S8 anyways? only rooting/unlocking bootloader will void the warranty.
Click to expand...
Click to collapse
https://drive.google.com/file/d/1bw-cYNY1KoEH4Pa-a9dJRQJW09r_uw93/view
Here is the firmware that I want to upload into my SM-G892A, will this help my phone get Pie? Will I need to download any special Odin? Thanks for the help.
05Anjelly said:
https://drive.google.com/file/d/1bw-cYNY1KoEH4Pa-a9dJRQJW09r_uw93/view
Here is the firmware that I want to upload into my SM-G892A, will this help my phone get Pie? Will I need to download any special Odin? Thanks for the help.
Click to expand...
Click to collapse
the firmware version in your link is the one in this article which is pie, so yes. As far as Odin goes, i usually default to the newest one if im out downloading one anyways. 3.13.1 is the latest version. https://odindownload.com/SamsungOdin/#.XWFVzOhKjb0
youdoofus said:
the firmware version in your link is the one in this article which is pie, so yes. As far as Odin goes, i usually default to the newest one if im out downloading one anyways. 3.13.1 is the latest version. https://odindownload.com/SamsungOdin/#.XWFVzOhKjb0
Click to expand...
Click to collapse
Yes, I just did it, and wow! I got Pie! Thank you so much:good::good::good::good:
05Anjelly said:
Yes, I just did it, and wow! I got Pie! Thank you so much:good::good::good::good:
Click to expand...
Click to collapse
for sure bro! glad you got it taken care of!
Wow , just looking a way to upgrade to pie
Thanks so much!
sonyhack said:
Wow , just looking a way to upgrade to pie
Thanks so much!
Click to expand...
Click to collapse
I hope we fixed your problem! Make sure to give youdoofus thanks! I was scared I would never recieve Pie and I was nervous to flash this firmware to my phone but he gave me the assurance I needed
05Anjelly said:
I hope we fixed your problem! Make sure to give youdoofus thanks! I was scared I would never recieve Pie and I was nervous to flash this firmware to my phone but he gave me the assurance I needed
Click to expand...
Click to collapse
see, now this is the kind of sh1t that keeps me coming back and trying to help out wherever i can and learn from those who know more than myself. Rock on my dude!!
05Anjelly said:
I hope we fixed your problem! Make sure to give youdoofus thanks! I was scared I would never recieve Pie and I was nervous to flash this firmware to my phone but he gave me the assurance I needed
Click to expand...
Click to collapse
Some tips before flashing? Did you flash every file on the .zip archive? (BL_ , AP_ , CSC and so?)
Factory reset before/after flashing?
sonyhack said:
Some tips before flashing? Did you flash every file on the .zip archive? (BL_ , AP_ , CSC and so?)
Factory reset before/after flashing?
Click to expand...
Click to collapse
Since its just an update, you are able to keep your data if you put HOME_CSC in the bottom box. So, yes use every file if you want to keep your data. If not, put CSC where its supposed to be and thats it. I don't have access to my computer but thats what I did. You don't need factory reset. Just go to any "How to Install Any Firmware Update through Odin" Video on YouTube and you should see a good tutorial. It is just an update. I hope I fixed you problem! Don't be nervous about updating, only be nervous when you flash a ROM on it!
sonyhack said:
Some tips before flashing? Did you flash every file on the .zip archive? (BL_ , AP_ , CSC and so?)
Factory reset before/after flashing?
Click to expand...
Click to collapse
nothing other than having the correct version of Odin for your phone and ADB drivers installed along with the correct firmware files. And yes the Home_CSC is to not factory reset, and the regular CSC is to factory reset it
PIT Error
I tried flashing the files you provided, but it keeps failing on "Get PIT for Mapping". I tried 4 times and every one failed on the same part. I am on the exact same baseband version you were on, the provider is AT&T and the phone is unlocked. I don't get what the problem is...
NeverEndingCycle said:
I tried flashing the files you provided, but it keeps failing on "Get PIT for Mapping". I tried 4 times and every one failed on the same part. I am on the exact same baseband version you were on, the provider is AT&T and the phone is unlocked. I don't get what the problem is...
Click to expand...
Click to collapse
you need to go into the CSC file and extract the PIT. once extracted, go into the other options in Odin and put the pit in its slot, then reflash with the CSC you got the PIT from in its proper place along with the others.
youdoofus said:
you need to go into the CSC file and extract the PIT. once extracted, go into the other options in Odin and put the pit in its slot, then reflash with the CSC you got the PIT from in its proper place along with the others.
Click to expand...
Click to collapse
Alright, how do I go about extracting the PIT file from the CSC file?
NeverEndingCycle said:
Alright, how do I go about extracting the PIT file from the CSC file?
Click to expand...
Click to collapse
The CSC is just a compressed file, so WinRAR will do it if 7zip doesnt
youdoofus said:
The CSC is just a compressed file, so WinRAR will do it if 7zip doesnt
Click to expand...
Click to collapse
I did that but it didn't change anything. Do I need to remove the pit file from the CSC file?
NeverEndingCycle said:
I did that but it didn't change anything. Do I need to remove the pit file from the CSC file?
Click to expand...
Click to collapse
shouldnt need to. flash the 4 files again in Odin but select the "re-partition" box