I was about to sell my rooted Note 4, and I did a "reset phone" in the settings menu to wipe the data out , so I can sell it. When the phone turned back I saw on the top left a blue "recovery mode" message and the next is my phone black, and on the middle of the screen appear every 5-8 sec a green android logo with "Installing System update" but just for a second, and goes back to black.
And again, and again...
What a hell happened?I am stuck.. I tried to take the battery out , waited and put it back, than I was holding the volume up+home+power on bottoms to get a recovery mode menu, but it does the same "flashing" screen thing.. Please help me I have a buyer for this phone , really need to fix it!
atti_mac said:
I was about to sell my rooted Note 4, and I did a "reset phone" in the settings menu to wipe the data out , so I can sell it. When the phone turned back I saw on the top left a blue "recovery mode" message and the next is my phone black, and on the middle of the screen appear every 5-8 sec a green android logo with "Installing System update" but just for a second, and goes back to black.
And again, and again...
What a hell happened?I am stuck.. I tried to take the battery out , waited and put it back, than I was holding the volume up+home+power on bottoms to get a recovery mode menu, but it does the same "flashing" screen thing.. Please help me I have a buyer for this phone , really need to fix it!
Click to expand...
Click to collapse
Download firmware for your model from www.sammobiles.com extract firmware file ,take your phone in download mode by pressing volume down+home+power .you will see warning screen then press volume up.download odin tool for pc and samsung usb drivers for note 4 then open odin press Ap in odin and select firmware file and hit start,wait until odin pass .and your device will be good to go.
Trex888 said:
Download firmware for your model from www.sammobiles.com extract firmware file ,take your phone in download mode by pressing volume down+home+power .you will see warning screen then press volume up.download odin tool for pc and samsung usb drivers for note 4 then open odin press Ap in odin and select firmware file and hit start,wait until odin pass .and your device will be good to go.
Click to expand...
Click to collapse
The sammobiles website down for maintenence this weekend , great.....
atti_mac said:
The sammobiles website down for maintenence this weekend , great.....
Click to expand...
Click to collapse
Tell me your model and I'll provide you a link to download firmware
Trex888 said:
Tell me your model and I'll provide you a link to download firmware
Click to expand...
Click to collapse
SM-N910T
Will be unlocked after this upload?
Thank you so much, can't wait
If Sammobile is down, you can find lots of Samsung firmwares even for SM-N910T on www.updato.com. Hope this helps.
atti_mac said:
SM-N910T
Will be unlocked after this upload?
Thank you so much, can't wait
Click to expand...
Click to collapse
To be honest i donno about unlocking but here is the link to download firmware
https://www.androidfilehost.com/?fid=24665509702140550
Trex888 said:
To be honest i donno about unlocking but here is the link to download firmware
https://www.androidfilehost.com/?fid=24665509702140550
Click to expand...
Click to collapse
I downloaded from there , opened a zip file copied to a folder. Took the phone in download mode, Opened Odin, clicked on AP and got the file to point ( not a zip file anymore) and hit start.
My phone shows downloading, and like a line started from the left (light blue , but only very short, and doesn't move anymore.
The pc's latest log shows ID:0/003> NON-HLOS.bin
So is it stopped ? the phone said don't turn off target, i don't want to brick it so what to do?
I had no choice i unplug it, and took out the battery, still not brick I started all over again, and now the latest log is : boot.img but the line still not moving...
binary size shows : 3793.1 mb
Update , 2nd time it was moving further.. passed boot, recovery.img, latest log : system.img.ext4. the blue line moved 1/2" and it is stopped again. I don't know what to do...
I am using Odin 3 V3.12
Try odin 3.10 and use pit file with firmware it will repartation your device and hopefully it ahould fix here is the link for pit file
https://mega.nz/#!yE0QkRgR!8DvGvAauRkb-2xmtH_3ZluoYwCvqNaaSOnXMLYB_CAI
Select AP for firmware and PIT for pit file and hit start
Trex888 said:
Try odin 3.10 and use pit file with firmware it will repartation your device and hopefully it ahould fix here is the link for pit file
https://mega.nz/#!yE0QkRgR!8DvGvAauRkb-2xmtH_3ZluoYwCvqNaaSOnXMLYB_CAI
Select AP for firmware and PIT for pit file and hit start
Click to expand...
Click to collapse
Same thing, is it possible the md5 file is not the right one?
Update, I downloaded a different file from the www.updato.com. website , and it is already passed that point when was stuck before. Cross fingers.
atti_mac said:
Same thing, is it possible the md5 file is not the right one?
Update, I downloaded a different file from that other website you guys mentioned, and it is already passed that point when was stuck before. Cross fingers.
Click to expand...
Click to collapse
No the firmware file is correct qnd i have tested it. What is exatly happening while you flash firmware?
Ok, i used that 2nd file, and was everything perfect! I got a message on Odin : "PASS" the phone turned on, passed a Samsung logo, the T-Mobile screen turned on, and the T mobile song, and stuck on that screen....
this is a file I used a second time , and I stuck now at boot by the T-Mobile logo
N910TUVU2DOK2_N910TTMB2DOK2_N910TUVU2DOK2_HOME.tar.md5
and this file was the one stuck always at the beginning :
N910TUVS2EPG2_N910TTMB2EPG2_N910TUVS2EPG2_HOME.tarmd5
just a note, my Note 4 was rooted and It wasn't a latest firmware , actually probably like 8 months old or at least 6 month old firmware on it.
WORKING!! 100% Working. I just took out a battery , and was waiting a bit, turned it back and working! Thank You guys!!
you shoud have clear cache and data through recovery after that successful flash..
but you didn't
atti_mac said:
Ok, i used that 2nd file, and was everything perfect! I got a message on Odin : "PASS" the phone turned on, passed a Samsung logo, the T-Mobile screen turned on, and the T mobile song, and stuck on that screen....
this is a file I used a second time , and I stuck now at boot by the T-Mobile logo
N910TUVU2DOK2_N910TTMB2DOK2_N910TUVU2DOK2_HOME.tar.md5
and this file was the one stuck always at the beginning :
N910TUVS2EPG2_N910TTMB2EPG2_N910TUVS2EPG2_HOME.tarmd5
just a note, my Note 4 was rooted and It wasn't a latest firmware , actually probably like 8 months old or at least 6 month old firmware on it.
WORKING!! 100% Working. I just took out a battery , and was waiting a bit, turned it back and working! Thank You guys!!
Click to expand...
Click to collapse
Wipr cache and make factory reset in recovery to get clean system firmware.
Related
I followed the instructions from here ( http://forum.xda-developers.com/showthread.php?t=743769 ) up until flashing the actual zip and forgot I put the zip on my external sdcard rather than "internal" sdcard. Now my phone won't get past the initial white Samsung Vibrant screen. Also, I can only get into stock recovery. After clicking "reinstall packages" it just reboots and brings me back to stock recovery. Please help. Thank you.
You will need to flash back to stock then you will have access to your phone again.. you will have to start over to flash that rom. after you flash back to stock using odin
use this thread
http://forum.xda-developers.com/showthread.php?t=734475
You will need the right windows drivers so Odin will see your phone pick them up here.
Windows 64bit
Windows 32bit
Directions posted by setzer715
1. Put your phone in download mode by plugging it in and then holding Vol Up+Down and Power. As SOON as the screen goes black release power but NOT Vol Up+Down.
2. Launch Odin
3. Unplug your phone.
4. Load the pit and pda files into odin.
5. Plug your phone back in. You should now see one of the small blocks turn yellow and show you the com port. If not, something is wrong with your drivers.
6. Click start. If it flashes, great. If it hangs at File analasys then repeat 1-5.
6a. If Odin hangs at cache.rfs then move on to 6b.
6b. Unplug your phone (Odin will say it was removed) and remove the battery. DO NOT SHUT DOWN ODIN!!!!!!
6c. Put the battery back in and plug it back into your computer and put it back into download mode using step 1.
6d. Press start on Odin and it should now flash.
Also if you continue to hang at cache.rfs I found that if you delete s1_odin_20100512.pit then copy a new copy of the file over to your odin directory it seems to work fine after that.
Damn it.Thanks....
vol dn+up should get you to the stock recovery util right? the yellow and blue one?
edit: nvm, scare is over lol
On step 6d, where it says to press start again on odin, odin does not let me do this. The start, reset, pit, pda, etc... buttons are grey and will not let me press them. Help!
EDIT: also gives me a message in the upper left corner that says "CACHE" if that helps (in the far upper left box above where the yellow COM3 thing was.
bumpbumpbump
$iMoney said:
On step 6d, where it says to press start again on odin, odin does not let me do this. The start, reset, pit, pda, etc... buttons are grey and will not let me press them. Help!
EDIT: also gives me a message in the upper left corner that says "CACHE" if that helps (in the far upper left box above where the yellow COM3 thing was.
Click to expand...
Click to collapse
You need to delete your s1_odin_20100512.pit file and then extract a new copy to the odin folder then flash again. happened to me and that is all I did to fix it. step 6d did not work for me has well.
Hmmmm it's still not working. Would it help if i made a video showing what i'm doing then you can look it over and tell me if I'm doing something incorrectly? Also maybe I should be more clear. There is no way for me to start the flash again after removing my device as per step 6 without having to completely restart odin, thus restarting the process.
Update: Still not working. Really need a fix for this. Is there another way to un-brick my phone?
EDIT: To clarify, my problem was getting stuck as Cache.rfs and never going past that. I did try the previous steps listed in this article, as well as trying to reinstall all drivers and even using different Odin copies from other threads (even though they were all the same Odin 3). No .pit file seemed to work for me. Also, I'd like to point out that I have this issue with my netbook, but my work computer where I've done all my Odin flashing before did not have this issue, and I could use the .pit files perfectly fine.
First off, I'm not anyone special (I guess depends on the meaning of special), I don't dev... I play around. That's all. So take this all with a grain of salt.
I had the same issue, and have spent all night trying to fix it. Just now I didn't use the .pit file at all. Just the .tar in the PDA slot. Immediately went through and reflashed everything and I am fully up and running.
I can't guarantee that I don't have some kind of issues now but I am now back at my home screen and the phone seems to be operating fine.
The files I used are as follows:
Stock 2.1 firmware for the Vibrant: http://forum.xda-developers.com/showthread.php?t=739091
Samsung studio 7 (seemed to get Odin to recognize the phone without having to disconnect and reconnect, thought it might have something to do with the issue, though not sure): http://www.4shared.com/file/117435710/3d286573/Samsung_PC_Studio_72249.html
And the Samsung USB Drivers: http://forum.xda-developers.com/showthread.php?t=728929
Now, if a real dev can tell us what happens when you don't use the .pit file, we can know if there is any longterm repercussion from this. Short term though, working like a dream. I hope this helps, because being stuck without a working Vibrant sucks!
ODIN is a pain but I've found a way to get it work pretty consistently for me. Whenever you flash a ROM or back to stock, always make sure you enable USB debugging, and have adb working on your computer.
Open up your command console, plug in your device, open up ODIN, and type "adb reboot download". ODIN should recognize your phone when it restarts and a COM will light up.
From my experience, ODIN recognizes the devices better this way and hasn't hung for me so far (granted it's only 3 times). When I was booting into download manually and then plugging in the USB, it would hang at cache.rfs. If you don't have USB debugging enabled, then only thing you can do is keep retrying over and over. Took me like 15 tries once before it finally ran.
Can't thank you guys enough. Phone is back to normal! As soon as I didn't use the pit file it worked like a charm.
hey...i'm in the same situation as you...i can't get it to work...i'm trying to do just the tar file right now but it still hangs on cache.rfs how long did you have to wait?
$iMoney said:
Can't thank you guys enough. Phone is back to normal! As soon as I didn't use the pit file it worked like a charm.
Click to expand...
Click to collapse
which firmware did you use? did you use the true stck 2.1 firmware?
tq745 said:
hey...i'm in the same situation as you...i can't get it to work...i'm trying to do just the tar file right now but it still hangs on cache.rfs how long did you have to wait?
Click to expand...
Click to collapse
It should go right away. If it's hanging at cache.rfs, then it's not working. I really think its a drivers issue with ODIN. Just keep restarting your phone and ODIN and retrying.
I used the tar file that is linked to from the second post on this thread. I didn't even download what you linked me to, I just didn't use the pit file, like you told me and it worked with the files I already had.
My phone will absolutely not go into download mode. Is this a sign of some other problem or am i just out of luck?
ahhduy said:
My phone will absolutely not go into download mode. Is this a sign of some other problem or am i just out of luck?
Click to expand...
Click to collapse
how are you trying to get into download mode?
skater4690 said:
how are you trying to get into download mode?
Click to expand...
Click to collapse
Holding down + power when turning on, tried other varients like volume up instead of down, usb connected or usb not connected etc.
ahhduy said:
Holding down + power when turning on, tried other varients like volume up instead of down, usb connected or usb not connected etc.
Click to expand...
Click to collapse
ok try this...
1)plug into a usb with power
2)wait for the battery to show up
3)hold power and both volume buttons
4)wait for the vibrant screen to flash twice it will go once then seem like it turns off but then pops up agian
5)after it turns off the second time release the power button but still hold the volume buttons and you should be in download mode now
REMEMBER TO HAVE THE USB PLUGGED INTO THE COMPUTER AND YOUR PHONE!!!
I'm not sure what type of "bricked" this would be but, I tried to flash my Canadian Fido S4 I337m with a MF3 modem. I did this through Odin Mobile Pro. At first it was all good, it started to restart with a blue android figure. It started to take a really long time and nothing was happening so I decided to turn the phone off. Now the phone won't turn back on and it won't connect to the PC. I have my backup saved on my sd card but I can't get the phone to load at all.
It's currently stuck the battery charging power up screen. I can't post a picture since I haven't posted 10 times apparently... So it's the grey battery icon, the circle in the middle isn't moving whatsoever.
Did a battery pull, tried starting it in safe mode, and tried to restart it in the download mode. All of which have failed.
Any advice would be helpful.
Thanks
*Update*
The blue android figure is back. Does anyone have any information on how long this little android guy is supposed to be around for?
benjiyap said:
I'm not sure what type of "bricked" this would be but, I tried to flash my Canadian Fido S4 I337m with a MF3 modem. I did this through Odin Mobile Pro. At first it was all good, it started to restart with a blue android figure. It started to take a really long time and nothing was happening so I decided to turn the phone off. Now the phone won't turn back on and it won't connect to the PC. I have my backup saved on my sd card but I can't get the phone to load at all.
It's currently stuck the battery charging power up screen. I can't post a picture since I haven't posted 10 times apparently... So it's the grey battery icon, the circle in the middle isn't moving whatsoever.
Did a battery pull, tried starting it in safe mode, and tried to restart it in the download mode. All of which have failed.
Any advice would be helpful.
Thanks
*Update*
The blue android figure is back. Does anyone have any information on how long this little android guy is supposed to be around for?
Click to expand...
Click to collapse
Download Odin 3.07 for the PC.... you flashed the wrong mode... I believe you flashed a US modem not a Canadian on... suggest NC1 can be found in the forum...
With the phone unplugged, press volume down +home+power if you get a warning, release buttons and press voulme up to go to download mode...
Start Odin.... important... take off auto reboot....
there are instructions on how to properly flash the modem... likely in the same thread you found the file.....
Flash only the modem.bin file inside the folder... do not flash the nonhalos file....
Most instructions sau flash once... reboot to download mode.. flash again....
Basically let me know if you can get to download mode... I tried to google blue android on screen but didn't find anything yet... first I have heard of blue... I have seen green dead ones though....
Gage_Hero said:
Download Odin 3.07 for the PC.... you flashed the wrong mode... I believe you flashed a US modem not a Canadian on... suggest NC1 can be found in the forum...
With the phone unplugged, press volume down +home+power if you get a warning, release buttons and press voulme up to go to download mode...
Start Odin.... important... take off auto reboot....
there are instructions on how to properly flash the modem... likely in the same thread you found the file.....
Flash only the modem.bin file inside the folder... do not flash the nonhalos file....
Most instructions sau flash once... reboot to download mode.. flash again....
Basically let me know if you can get to download mode... I tried to google blue android on screen but didn't find anything yet... first I have heard of blue... I have seen green dead ones though....
Click to expand...
Click to collapse
No, I can't seem to get into download mode. It just keeps heading on to the the blue android. I purchased a dongle jig to get it to download mode on ebay hoping that would work.
Method 1 Odin Mobile
Extract TAR and place modem.bin on Internal or External SD Card
Open mobile Odin (free version works but pro is awesome)
Select modem 2 and find extracted bin file
Press flash firmware button
System will boot to download
Hold power button for 10 seconds if download mode in green comes up.( should be blue)
Odin will install modem files
Done
This is what I was following. It said if it comes up as a blue android it's good.
benjiyap said:
No, I can't seem to get into download mode. It just keeps heading on to the the blue android. I purchased a dongle jig to get it to download mode on ebay hoping that would work.
Method 1 Odin Mobile
Extract TAR and place modem.bin on Internal or External SD Card
Open mobile Odin (free version works but pro is awesome)
Select modem 2 and find extracted bin file
Press flash firmware button
System will boot to download
Hold power button for 10 seconds if download mode in green comes up.( should be blue)
Odin will install modem files
Done
This is what I was following. It said if it comes up as a blue android it's good.
Click to expand...
Click to collapse
If you put the modem file on an external sd card.... maybe you could pull the card, put it in a usb reader and put the proper modem.bin file on the card and put it back in the phone and power it up.... see what happens. I am guessing it couldn't finish the process because you have the wrong modem file...... Okay so now I realize you are stuck on the mobile odin logo... (blue guy) search google for how to get out of that or go to the mobile odin thread and ask chainfire... it is his app....
I've got the problem fixed. I re-flashed my whole firmware and managed to get the phone into download mode using a USB Jig. This is for reference if anyone encounters the same problem in the near future.
Thanks for the help and advice though.
Hi,
I have just purchased Samsung Galaxy Note 3 N9005 in used condition. I have 2 major problems in the phone and I am very frustrated.
1- The moment I purchased it the battery meter shows 100% and phone gets shut down after a-2 hours time. Then it tries to keep on restart but each time the when first screen with Phone name appears, the phone gets off and the same process repeat again and again. Then I have to plug-in charger, do some charging and Turn-On the phone.
2- Second problem is with Camera, the image quality is too bad. It is too blurry and whitish. Most of the time it does not Auto Focus also. There looks like some white dust inside the lens also. Front Camera quality is also not good
Plssssssssssssssssssss if anyone figure out how to fix these problems and what should I do
Thanks.
Replace the battery .
JJEgan said:
Replace the battery .
Click to expand...
Click to collapse
I have replaced the battery with a friend and gave my baterry to him. My battery worked fine in his phone and showed 71% but his battery was shown as 100% in my phone
Suggest Factory reset .
Tell us what model and firmware it is .
JJEgan said:
Suggest Factory reset .
Tell us what model and firmware it is .
Click to expand...
Click to collapse
It is "Samsung Galaxy Note 3 N9005".
Flash your stock firmware via Odin .
JJEgan said:
Flash your stock firmware via Odin .
Click to expand...
Click to collapse
You mean I need to install custom ROM? By the way now i came to know that if I recharge the phone when it is OFF then it gives good time but battery percentage does not decline at all. Is it a problem with motherboard??? Camera is working fine today don't know why, maybe its works good when battery is charged, can it be the reason???
No i said stock firmware .
JJEgan said:
No i said stock firmware .
Click to expand...
Click to collapse
Can u please describe the steps to do that. When I click on Check Updates, it says something like your phone is modified...
BASICS
downlpoad relevant firmware from sammobile dot com
Instructions :
Extract (unzip) the firmware file to a tar file if needed .
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
JJEgan said:
BASICS
downlpoad relevant firmware from sammobile dot com
Instructions :
Extract (unzip) the firmware file to a tar file if needed .
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Click to expand...
Click to collapse
I have downloaded Odin v3.10.7 as mentioned on sammobile's relevant firmware page for my device (SM-N9005) and downloaded the firmware also. Now I am gong to follow the instructions and flash ROM on my device. Thank you for your guidance, hoping to succeed and fix my issues
JJEgan said:
BASICS
downlpoad relevant firmware from sammobile dot com
Instructions :
Extract (unzip) the firmware file to a tar file if needed .
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Click to expand...
Click to collapse
It FAILED. I followed all instructions but it FAILED in few minutes time. Tried again by clicking Start button from the Odin interface but same result Please see attached snapshots of Odin interface log and phone screen. What to do Should I disconnect phone from PC and reboot...
fawaan said:
It FAILED. I followed all instructions but it FAILED in few minutes time. Tried again by clicking Start button from the Odin interface but same result Please see attached snapshots of Odin interface log and phone screen. What to do Should I disconnect phone from PC and reboot...
Click to expand...
Click to collapse
There is message in red on Phone "Invalid ext4 image"
fawaan said:
There is message in red on Phone "Invalid ext4 image"
Click to expand...
Click to collapse
Ahhh... now a yellow triangle image with a message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." on rebooting the phone. see attachment.
Thanks a lot the man who wrote this guide (http://www.cultofandroid.com/53963/save-galaxy-note-3-failed-kitkat-update-odin-tip/). It fixed my fone which was bricked.
BUT THE OLD ISSUES ARE STILL THERE. BATTERY METER IS STILL SHOWING 100% AND I CANNOT RECHARGE MY PHONE UNTIL IT IS OFF
Battery Calibration app from Play store .
This will not calibrate the battery but wipe your battery stats .
Then charge and use for a few days .
JJEgan said:
Battery Calibration app from Play store .
This will not calibrate the battery but wipe your battery stats .
Then charge and use for a few days .
Click to expand...
Click to collapse
I am doing the same. I have downloadable a battery collaboration app (https://play.google.com/store/apps/details?id=com.ignisoft.battery.calibration&hl=en) and drained the battery by making calls and playing a game...
I used this app because it doesn't require to root the phone, others do.
Now recharging phone, let see what happens when I restart the phone.
No Improvements same old story of 100% baterry meter after draining and recharging it and restarting the phone
Hi. Browsed for ages and always come here for answers.
Here's my problem.
2x S8s. SM-950f.
Updated to most recent software through software update. Both phones were glitchy and crashing and just generally irritating after.
Factory data reset etc. This did not resolve the problems, also led to one of them having issues with FRP (annoying)
Used Odin to try and flash the latest firmware (from sammobile, UK BTU) after flashing both, they reset and powered on. Got stuck at the S8 screen.
Restarted then both were at the "an error occurred during update" screen.
Managed to get back to download screen. Re checked the software and model numbers, even that the bootloader was the correct version etc. All was fine.
Connected to Odin, shows that it is connected, but nothing happens when clicking start.
Now after attempting that, both phones will not power on.
(One will when placed on the wireless charger, but just sticks at S8 screen) and download mode or reset screen can not be accessed. So, not exactly happy. And totally out of ideas
Any suggestions, beyond taking it to a shop to see if anyone can help.
yes .....dont tuch the phones for 24 hours let the battery die ...it will...connect to pc and then try download mode....u may need to press combination for like 1 minute to get to download mode....flash twrp reboot directly into it when odin says successfully .....wipe system data ....dont turn on phone download any custom rom flash and enjoy.....it will trip knox but worth than getting a new board....
Okay, will give that a try.
TWRP?
TWRP install
https://dl.twrp.me/dreamlte/twrp-3.2.3-0-dreamlte.img.tar.html: Download link for twrp SM-G950F (dreamlte)
Just said, wait until your device powers off due battery insufficience. Plug cable and hold at the same moment vol(down)+bixby+power. Then press vol(up) at the warning screen to proceed to odin mode. Let it charging a while like 1 h. Then unplug it and plug it to your pc. In Odin select ap the previous downloaded file. Take your mobile in your hand. With one hand, prepare your fingers to vol(up)+bixby and with the other hand start the flashibg process. Be careful, and take your hand directly from the mouse if you clicked start in odin, and position your one finger to power button, but dont click. If odin start pass, press immidiately the buttons (vol(up)+bixby+power) and let it to start into recovery. If you arrived to recovery, reply to us if not search for help!!!
Good luck
memreb
Still trying to get them on. Powered on to download mode but only for a couple of seconds and switched off again.
Can't get them to power on. Buggered
simonboyle said:
Still trying to get them on. Powered on to download mode but only for a couple of seconds and switched off again.
Click to expand...
Click to collapse
i have the same issue with my s8 but when i boot in download mode the screen goes black but if i press volupe up it connect to odin with black screen you shoud give it a try
Will try that
Okay, downloaded TWRP, can get phone calls nected to Odin but when I extract TWRP it doesn't give a valid file type.
Am I being dumb.
No files appear that Odin will recognise.
Also just shows as "recovery" no .tar or anything
Ignore above. Corrupted download.
Sorted.
Now when flashing TWRP is gets to a fail due to
"Complete (write) fail
Hi you should try flashing official firmware
itac47 said:
Hi you should try flashing official firmware
Click to expand...
Click to collapse
The point of the thread us that I am.unable to do that.
So kinda useless post buddy.
Read the OP.
Anyone want two bootlooped S8s? Hahahaha
simonboyle said:
Anyone want two bootlooped S8s? Hahahaha
Click to expand...
Click to collapse
Not sure what stage your at and maybe some more useless ideas
1. Trying to flash twrp is kinda of useless if you can't get into your system need oem unlock for that.
2. Have you tried taking out Sim card and SD card and reboot.
3. If you can at least boot try smart switch as it has a emergency recovery option.
4. Trying rebooting in safe mode.
All been attempted
Hello everyone,
My m30s is bricked as well. The phone got off suddenly while operating youtube (A couple of apps were running in the background).
Phone was running Android 11 oneUi 3
I couldn't boot into recovery mode by pressing Power + Volume up button. Didn't work. Then read somewhere on XDA to press volume up and down together and enter download mode by connecting cable to pc.. I did that and successfully flashed the official Samsung firmware using Odin. Phone is still stuck on the Boot Samsung logo - powered by Android upon rebooting after Odin successful flash. I tried even entering recovery mode from download mode by pressing power+ volume down , releasing volume down after reboot and then pressing volume up for 2-3 seconds. I'm just not able to get to recovery mode at all. I just don't know what else to do now. Can someone please help me out.
Try flash Samsung stock ROM again but with repartition ticked in Odin options.
LR7875 said:
Try flash Samsung stock ROM again but with repartition ticked in Odin options.
Click to expand...
Click to collapse
Sure. ill try that right away. Will post the results in next 10 mins.
@LR875 ,
I tired the above, it fails saying, Set PIT File, Cant open the specified file.
Is it a 5 part firmware with files AP BL HOME_CSC CSC PIT?
If not then download at www.samfw.com
LR7875 said:
Is it a 5 part firmware with files AP BL HOME_CSC CSC PIT?
If not then download at www.samfw.com
Click to expand...
Click to collapse
AP,BL, CP, CSC, Home_CSC
PIT has to be there as well ?
lineofsight9865 said:
AP,BL, CP, CSC, Home_CSC
PIT has to be there as well ?
Click to expand...
Click to collapse
Hi bro,
Kindly clarify please, my firmware files only has the above listed. No PIT file separately. Im downloading as you suggested.
Hello. The new firmware files contain the following 5 files - AP, CP, BL , CSC , HOME_CSC
Well also flash it but as you don't have tge pit file, maybe try fimding on web
Hi bro. Pit file is to be flashed how ? There is no option in odin to add that file.
Isn't there a PIT button?
Hi. Just now in the process of flashing. Found the pit button and file. Lets hope this works. Will post results once flashing done.
Hi. Flashing done successfully. Restarted automatically , now again it's not going past the Samsung logo - powered by Android screen.
Well might be hardware problem sadly
You sure of this ? Which area most likely ?
If that is the case, EMMC storage chip (Samsung was infamous of that with their S3 sudden death syndrome).
Well even if you have only software issue, something is blocking you from installing stock rom and as you does not have OEM unlocked,you can it flash a custom rom, so it is bad.
Ok.btw phone does not switch on while pressing only power button and volume down button or simply even power button. Happened yesterday as well. I have to put it to charge for a while and then again after an hour or so it automatically starts with a vibration and gets stuck on the Samsung boot logo - powered by Android. Any clue here whats happening ?
lineofsight9865 said:
Ok.btw phone does not switch on while pressing only power button and volume down button or simply even power button. Happened yesterday as well. I have to put it to charge for a while and then again after an hour or so it automatically starts with a vibration and gets stuck on the Samsung boot logo - powered by Android. Any clue here whats happening ?
Click to expand...
Click to collapse
As a last resort replace the battery.
Hi. I opened the back panel. Heated the cpu for a while. It started, went to the single samsung logo screen and then restarted and went back to the boot logo. For a while android had loaded something with a loading screen indicator as well. Now back to square one.
Well you heated the CPU? Try slightly pressing on it while heated